No support for reading temperature back yet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used for uvd power management.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only the APUs support power gating.

v2: disable cgcg for now
v3: workaround hw issue in mgcg
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

and remove duplicate si_rlc functions.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. Handle the the thermal state directly in the work handler.
Remove the state selection function since nothing else uses it now.
2. On some asics there is no thermal state, so we just use a regular
state and force the low performance state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the UVD handle information to determine which
which power states to select when using UVD.  For
example, decoding a single SD stream requires much
lower clocks than multiple HD streams.

v2: switch to a cleaner dpm/uvd interface
v3: change the uvd power state while streams
are active if need be
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a helper function for counting the number of open stream handles.

v2: fix copy-pasta in comments and whitespace error
v3: make function static since it's only used in radeon_uvd.c
at the moment
v4: make non-static again for future changes
v5: make static again for new rework of dpm uvd changes
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No longer used now that we use the async dma engines or
CP DMA for bo copies.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This bug (introduced in 3.10) in WREG32_OR made
commit d3418eac
"drm/radeon/evergreen: setup HDMI before enabling it"
cause a regression. Sometimes audio over HDMI wasn't working, sometimes
display was corrupted.

This fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=60687
https://bugzilla.kernel.org/show_bug.cgi?id=60709
https://bugs.freedesktop.org/show_bug.cgi?id=67767Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need proper locking in the driver when accessing instanced
registers on CIK.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise just reinitialize from scratch on resume,
and so make it more likely to succeed.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Can cause hangs when enabled in certain motherboards.
Set radeon.aspm=0 to disable aspm.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Covers requirements of all current asics.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

There are cases where we need more than 4k alignment.  No
functional change with this commit.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Changing the UVD BOs offset on suspend/resume doesn't work because the VCPU
internally keeps pointers to it. Just keep it always pinned and save the
content manually.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66425

v2: fix compiler warning
v3: fix CIK support

Note: a version of this patch needs to go to stable.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the vblank time is too short to adjust mclk,
assume multiple displays (no mclk adjustments).
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows you to force specific power levels within a power
state.  Due to hardware restrictions between generations, the
interface is limited to the following 3 selections:

auto: all levels enabled
low: forced to the lowest power level
high: forced to the highest power level
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Certain older rv770 asics have both a performance and
a 3D performance state rather than just multiple performance
levels in the state power state.  The current code would
select the performance state rather than the 3D performance
state when the "performance" profile was selected.  This change
switches to the "balanced" profile by default which ends up being
the internal performance profile.  When the user selects the
"performance" profile, it selects the internal 3D performance
state so the user can select the higher performance modes.

For most asics this changes nothing.  For certain rv770 asics
with static performance and 3D performance states, this allows
you to select between then using by selecting the "balanced"
and "performance" dpm profiles.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This lays the frameworks to report realtime power level
feedback.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This commit converts the source of the val_seq counter to
the ww_mutex api. The reservation objects are converted later,
because there is still a lockdep splat in nouveau that has to
resolved first.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds dpm support for SI asics.  This includes:
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2/gen3 switching
- power containment
- shader power scaling

Set radeon.dpm=1 to enable.

v2: enable hainan support, rebase
v3: guard acpi stuff
v4: fix 64 bit math
v5: fix 64 bit div harder
v6: fix thermal interrupt check noticed by Jerome
v7: attempt fix state enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Validate the voltages against the voltage requirements of the
dispclk.  We currently don't adjust the disp clock so it never
changes, but we need to filter out voltage levels that are too
low none the less.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used by SI dpm.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Required for dpm on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This makes it easier the understand what the code is
doing.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These are needed for certain UVD power saving features.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Required for DPM on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Required for accessing certain pcie related registers.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SI uses a new atom table revision.  Required for DPM on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SI uses a new atom table.  Required for DPM on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There's a new table for calculating the memory pll
parameters on SI.  Required for SI DPM support.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These functions use acpi methods to adjust the pcie
gen speed.  Used by DPM.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now that the proper fix has been implemented I can
remove the last remnants of the initial implementation.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needed to properly handle dynamic state adjustment.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use a dedicated copy of the current power state since
we may have to adjust it on the fly.

v2: fix up redundant state sets
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use a dedicated copy of the current power state since
we may have to adjust it on the fly.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Driver needs this information to validate power states.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This data will be needed for dpm on newer asics.

v2: fix typo in rebase
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When using UVD, the driver must switch to a special UVD power
state.  In the CS ioctl, switch to the power state and schedule
work to change the power state back, when the work comes up,
check if uvd is still busy and if not, switch back to the user
state, otherwise, reschedule the work.

Note:  We really need some better way to decide when to
switch out of the uvd power state.  Switching power states
while playback is active make uvd angry.

V2: fix locking.

V3: switch from timer to delayed work

V4: check fence driver for UVD jobs, reduce timeout to
    1 second and rearm timeout on activity

v5: rebase on new dpm tree

v6: rebase on interim uvd on demand changes

v7: fix UVD when DPM is disabled

v8: unify non-DPM and DPM UVD handling

v9: remove leftover idle work struct
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>