- 27 6月, 2008 12 次提交
-
-
由 Haavard Skinnemoen 提交于
Remove lots of unneeded #includes, add #include <linux/kernel.h> and sort alphabetically. Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 Sedji Gaouaou 提交于
The name "mck" causes a conflict on AT91. Call it "pwm_clk" instead. Signed-off-by: NSedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 David Brownell 提交于
This is a minor tweak to the at32ap700x pin configuration for the SPI input pin (MISO), enabling the on-chip weak pullup (typical 190K) to (a) ensure a fixed data value for missing or input-only slaves; (b) prevent power waste associated with inputs floating near VDDIO/2. Atmel's boards have no external pullup or pulldown on these pins, so it's unlikely other boards would address these issues with external pulldowns. Were there trouble, board-specific code could turn off the relevant pullup(s). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 David Brownell 提交于
Basic I2C initialization for the NGW100 board: - Provide empty i2c device table. Daughtercards may add devices, and the ATtiny24 could do stuff too. - Set up EXTINT(3) so the ATtiny24 can interrupt the AP7000. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 Hans-Christian Egtvedt 提交于
This patch adds the PS/2 interface (PSIF) to the device code, split into two platform devices, one for each port. The function for adding the PSIF platform device is also added to the board header file. Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 Hans-Christian Egtvedt 提交于
This patch lets the board code choose which pin out to use for the LCD interface. On AT32AP7000 the LCDC is wired to two sets of pins, which lets the user choose between dual ethernet and 32-bit EBI. For the ATNGW100 board it is vital to have the choice to select the alternative pinout since this pinout is routed to the external headers. Update ATSTK1002 and ATSTK1004 to use the new interface. Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 David Brownell 提交于
On the odd chance some code uses a pin as a GPIO IRQ without calling gpio_request() or gpio_direction_input(), the debug dump should still show its pin status. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 Haavard Skinnemoen 提交于
__raw_readsb() should always use byte accesses, never halfword accesses, to I/O memory. Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 Martin Koegler 提交于
A signal handler should be able to change the signal stack used for the next signal by altering the ucontext_t passed as a parameter to the handler. This does not currently work on avr32 since it doesn't update the in-kernel signal context from the ucontext_t upon signal handler return. Fix it by adding a call to do_sigaltstack() from sys_rt_sigreturn(), bringing it in line with most other architectures. Signed-off-by: NMartin Koegler <mkoegler@auto.tuwien.ac.at> [haavard.skinnemoen@atmel.com: changed patch description] Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 Alex 提交于
On our custom board we have other oscillator rates than on atngw100 and atstk100x. Currently these rates are hardcoded in arch/avr32/mach-at32ap/at32ap700x.c. This patch moves them into board specific code. Signed-off-by: NAlex Raimondi <raimondi@miromico.ch> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 Haavard Skinnemoen 提交于
Fixes one of two ext4 build problems: ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined! Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 Haavard Skinnemoen 提交于
Some non-PCI drivers need the PCI variant of the DMA mapping API. Include <asm-generic/pci-dma-compat.h> to provide this through the non-PCI DMA mapping API. Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
- 25 6月, 2008 17 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Eliminate NULL test after alloc_bootmem in iosapic_alloc_rte() [IA64] Handle count==0 in sn2_ptc_proc_write() [IA64] Fix boot failure on ia64/sn2
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: [GFS2] fix gfs2 block allocation (cleaned up) [GFS2] BUG: unable to handle kernel paging request at ffff81002690e000
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm由 Linus Torvalds 提交于
* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: Remove now unused structs from kvm_para.h x86: KVM guest: Use the paravirt clocksource structs and functions KVM: Make kvm host use the paravirt clocksource structs x86: Make xen use the paravirt clocksource structs and functions x86: Add structs and functions for paravirt clocksource KVM: VMX: Fix host msr corruption with preemption enabled KVM: ioapic: fix lost interrupt when changing a device's irq KVM: MMU: Fix oops on guest userspace access to guest pagetable KVM: MMU: large page update_pte issue with non-PAE 32-bit guests (resend) KVM: MMU: Fix rmap_write_protect() hugepage iteration bug KVM: close timer injection race window in __vcpu_run KVM: Fix race between timer migration and vcpu migration
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: Revert "[WATCHDOG] hpwdt: Add CFLAGS to get driver working"
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: xen: remove support for non-PAE 32-bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: sparse fix kgdb: documentation update - remove kgdboe
-
由 Jie Luo 提交于
On 9xx chips, bus mastering needs to be enabled at resume time for much of the chip to function. With this patch, vblank interrupts will work as expected on resume, along with other chip functions. Fixes kernel bugzilla #10844. Signed-off-by: NJie Luo <clotho67@gmail.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Gerd Hoffmann 提交于
The kvm_* structs are obsoleted by the pvclock_* ones. Now all users have been switched over and the old structs can be dropped. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Gerd Hoffmann 提交于
This patch updates the kvm host code to use the pvclock structs and functions, thereby making it compatible with Xen. The patch also fixes an initialization bug: on SMP systems the per-cpu has two different locations early at boot and after CPU bringup. kvmclock must take that in account when registering the physical address within the host. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Gerd Hoffmann 提交于
This patch updates the kvm host code to use the pvclock structs. It also makes the paravirt clock compatible with Xen. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Gerd Hoffmann 提交于
This patch updates the xen guest to use the pvclock structs and helper functions. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Gerd Hoffmann 提交于
This patch adds structs for the paravirt clocksource ABI used by both xen and kvm (pvclock-abi.h). It also adds some helper functions to read system time and wall clock time from a paravirtual clocksource (pvclock.[ch]). They are based on the xen code. They are enabled using CONFIG_PARAVIRT_CLOCK. Subsequent patches of this series will put the code in use. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Benjamin Marzinski 提交于
This patch fixes bz 450641. This patch changes the computation for zero_metapath_length(), which it renames to metapath_branch_start(). When you are extending the metadata tree, The indirect blocks that point to the new data block must either diverge from the existing tree either at the inode, or at the first indirect block. They can diverge at the first indirect block because the inode has room for 483 pointers while the indirect blocks have room for 509 pointers, so when the tree is grown, there is some free space in the first indirect block. What metapath_branch_start() now computes is the height where the first indirect block for the new data block is located. It can either be 1 (if the indirect block diverges from the inode) or 2 (if it diverges from the first indirect block). Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Julia Lawall 提交于
As noted by Akinobu Mita alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Cliff Wickman 提交于
The fix applied in e0c6d97c "security hole in sn2_ptc_proc_write" didn't take into account the case where count==0 (which results in a buffer underrun when adding the trailing '\0'). Thanks to Andi Kleen for pointing this out. Signed-off-by: NCliff Wickman <cpw@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Jes Sorensen 提交于
Call check_sal_cache_flush() after platform_setup() as check_sal_cache_flush() now relies on being able to call platform vector code. Problem was introduced by: 3463a93d "Update check_sal_cache_flush to use platform_send_ipi()" Signed-off-by: NJes Sorensen <jes@sgi.com> Tested-by: NAlex Chiang: <achiang@hp.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 24 6月, 2008 11 次提交
-
-
由 Jason Wessel 提交于
- Fix warning reported by sparse kernel/kgdb.c:1502:6: warning: symbol 'kgdb_console_write' was not declared. Should it be static? Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
kgdboe is not presently included kgdb, and there should be no references to it. Also fix the tcp port terminal connection example. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jeremy Fitzhardinge 提交于
Non-PAE operation has been deprecated in Xen for a while, and is rarely tested or used. xen-unstable has now officially dropped non-PAE support. Since Xen/pvops' non-PAE support has also been broken for a while, we may as well completely drop it altogether. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Bob Peterson 提交于
This patch fixes bugzilla bug bz448866: gfs2: BUG: unable to handle kernel paging request at ffff81002690e000. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Wim Van Sebroeck 提交于
After Linus fixed the inline assembly, the CFLAGS option is not needed anymore. Signed-off-by: NThomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Avi Kivity 提交于
Switching msrs can occur either synchronously as a result of calls to the msr management functions (usually in response to the guest touching virtualized msrs), or asynchronously when preempting a kvm thread that has guest state loaded. If we're unlucky enough to have the two at the same time, host msrs are corrupted and the machine goes kaput on the next syscall. Most easily triggered by Windows Server 2008, as it does a lot of msr switching during bootup. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The ioapic acknowledge path translates interrupt vectors to irqs. It currently uses a first match algorithm, stopping when it finds the first redirection table entry containing the vector. That fails however if the guest changes the irq to a different line, leaving the old redirection table entry in place (though masked). Result is interrupts not making it to the guest. Fix by always scanning the entire redirection table. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
KVM has a heuristic to unshadow guest pagetables when userspace accesses them, on the assumption that most guests do not allow userspace to access pagetables directly. Unfortunately, in addition to unshadowing the pagetables, it also oopses. This never triggers on ordinary guests since sane OSes will clear the pagetables before assigning them to userspace, which will trigger the flood heuristic, unshadowing the pagetables before the first userspace access. One particular guest, though (Xenner) will run the kernel in userspace, triggering the oops. Since the heuristic is incorrect in this case, we can simply remove it. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
kvm_mmu_pte_write() does not handle 32-bit non-PAE large page backed guests properly. It will instantiate two 2MB sptes pointing to the same physical 2MB page when a guest large pte update is trapped. Instead of duplicating code to handle this, disallow directory level updates to happen through kvm_mmu_pte_write(), so the two 2MB sptes emulating one guest 4MB pte can be correctly created by the page fault handling path. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
rmap_next() does not work correctly after rmap_remove(), as it expects the rmap chains not to change during iteration. Fix (for now) by restarting iteration from the beginning. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
If a timer fires after kvm_inject_pending_timer_irqs() but before local_irq_disable() the code will enter guest mode and only inject such timer interrupt the next time an unrelated event causes an exit. It would be simpler if the timer->pending irq conversion could be done with IRQ's disabled, so that the above problem cannot happen. For now introduce a new vcpu requests bit to cancel guest entry. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-