Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

Implement the top-level bits of punching a hole into a file.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

Add an upper bound to the range of blocks to deallocate blocks to
function trunc_dealloc so that this function can be used for truncating
a file as well as for punching a hole into a file.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

Pull the code for computing the range of metapointers to iterate out of
gfs2_metapath_ra (for readahead), sweep_bh_for_rgrps (for deallocating
metapointers within a block), and trunc_dealloc (for walking the
metadata tree).

In sweep_bh_for_rgrps, move the code for looking up the resource group
descriptor of the current resource group out of the inner loop.  The
metatype check moves to trunc_dealloc.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

Turn gfs2_block_truncate_page into a function that zeroes a range within
a block rather than only the end of a block.  This will be used for
cleaning the end of the first partial block and the start of the last
partial block when punching a hole in a file.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

In rare cases, the current non-recursive delete algorithm doesn't
deallocate empty intermediary indirect blocks.  This should have very
little practical effect, but deallocating all blocks correctly should
still be preferable as it is cleaner and easier to validate.

The fix consists of using the first block to deallocate to compute the
start marker of the truncate point instead of the last block that needs
to be kept.  With that change, computing which indirect blocks are still
needed becomes relatively easy.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

The metadata read-ahead algorithm broke when switching from recursive to
non-recursive delete: the current algorithm reads ahead blocks at height
N - 1 while deallocating the blocks at hight N.  However, deallocating
the blocks at height N requires a complete walk of the metadata tree,
not only down to height N - 1.  Consequently, all blocks below height
N - 1 will be accessed without read-ahead.

Fix this by issuing read-aheads as early as possible, after each
metapath lookup.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

Split out the entire lookup loop from lookup_metapath and
fillup_metapath.  Make both functions return the actual height in
mp->mp_aheight, and return 0 on success.  Handle lookup errors properly
in trunc_dealloc.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

First, this function truncates the file in chunks.  When the original
file size isn't block aligned, each chunk that is truncated will remain
be misaligned.  This is inefficient.

Second, this function doesn't recognize where holes are, so it loops
through them.  For each chunk of a hole, it creates a new transaction.
At least avoid creating another transactions whe the current one is
still empty.  (An better fix would be to skip large holes, of course.)
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

The current transaction is being dereferenced before asserting that is
not NULL; that isn't going to help.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

Document when to use gfs2_blk2rgrpd for "inexact" resource group
matching.  Based on that, fix an incorrect use of gfs2_blk2rgrpd in
sweep_bh_for_rgrps.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

We iterate through the entire ordered writes list in
gfs2_ordered_write() to write out inodes. It's a good
place to try and shrink the list by throwing out inodes
that don't have any pages.
Signed-off-by: NAbhi Das <adas@redhat.com>
Acked-by: NSteven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

Before this patch, there was a lot of code redundancy between functions
log_write_header (which uses bio) and clean_journal (which uses
buffer_head). This patch reduces the redundancy to simplify the code
and make log header writing more consistent. We want more consistency
and reduced redundancy because we plan to add a bunch of new fields
to improve performance (by eliminating the local statfs and quota files)
improve metadata integrity (by adding new crcs and such) and for better
debugging (by adding new fields to track when and where metadata was
pushed through the journals.) We don't want to duplicate setting these
new fields, nor allow for human error in the process.

This reduction in code redundancy is accomplished by introducing a new
helper function, gfs2_write_log_header which uses bio rather than bh.
That simplifies recovery function clean_journal() to use the new helper
function and iomap rather than redundancy and block_map (and eventually
we can maybe remove block_map). It also reduces our dependency on
buffer_heads.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

This reverts commit 04e35f44.

SELinux runs with secureexec for all non-"noatsecure" domain transitions,
which means lots of processes end up hitting the stack hard-limit change
that was introduced in order to fix a race with prlimit(). That race fix
will need to be redesigned.
Reported-by: NLaura Abbott <labbott@redhat.com>
Reported-by: NTomáš Trnka <trnka@scm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull Page Table Isolation (PTI) v4.14 backporting base tree from Ingo Molnar:
 "This tree contains the v4.14 PTI backport preparatory tree, which
  consists of four merges of upstream trees and 7 cherry-picked commits,
  which the upcoming PTI work depends on"

NOTE! The resulting tree is exactly the same as the original base tree
(ie the diff between this commit and its immediate first parent is
empty).

The only reason for this merge is literally to have a common point for
the actual PTI changes so that the commits can be shared in both the
4.15 and 4.14 trees.

* 'WIP.x86-pti.base-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
  locking/barriers: Convert users of lockless_dereference() to READ_ONCE()
  locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()
  bpf: fix build issues on um due to mising bpf_perf_event.h
  perf/x86: Enable free running PEBS for REGS_USER/INTR
  x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD
  x86/cpufeature: Add User-Mode Instruction Prevention definitions

Merge branch 'WIP.x86-pti.base.prep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull Page Table Isolation (PTI) preparatory tree from Ingo Molnar:
 "This does a rename to free up linux/pti.h to be used by the upcoming
  page table isolation feature"

* 'WIP.x86-pti.base.prep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  drivers/misc/intel/pti: Rename the header file to free up the namespace

Pull timer fix from Thomas Gleixner:
 "A single bugfix which prevents arbitrary sigev_notify values in
  posix-timers"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-timer: Properly check sigevent->sigev_notify

Pull dmaengine fixes from Vinod Koul:
 "This time consisting of fixes in a bunch of drivers and the dmatest
  module:

   - Fix for disable clk on error path in fsl-edma driver
   - Disable clk fail fix in jz4740 driver
   - Fix long pending bug in dmatest driver for dangling pointer
   - Fix potential NULL pointer dereference in at_hdmac driver
   - Error handling path in ioat driver"

* tag 'dmaengine-fix-4.15-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: fsl-edma: disable clks on all error paths
  dmaengine: jz4740: disable/unprepare clk if probe fails
  dmaengine: dmatest: move callback wait queue to thread context
  dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved
  dmaengine: ioat: Fix error handling path

With CONFIG_MTD=m and CONFIG_CRAMFS=y, we now get a link failure:

  fs/cramfs/inode.o: In function `cramfs_mount': inode.c:(.text+0x220): undefined reference to `mount_mtd'
  fs/cramfs/inode.o: In function `cramfs_mtd_fill_super':
  inode.c:(.text+0x6d8): undefined reference to `mtd_point'
  inode.c:(.text+0xae4): undefined reference to `mtd_unpoint'

This adds a more specific Kconfig dependency to avoid the broken
configuration.

Alternatively we could make CRAMFS itself depend on "MTD || !MTD" with a
similar result.

Fixes: 99c18ce5 ("cramfs: direct memory access support")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull vfs fixes from Al Viro:
 "The alloc_super() one is a regression in this merge window, lazytime
  thing is older..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: Handle lazytime in do_mount()
  alloc_super(): do ->s_umount initialization earlier

Pull ext4 fixes from Ted Ts'o:
 "Fix a regression which caused us to fail to interpret symlinks in very
  ancient ext3 file system images.

  Also fix two xfstests failures, one of which could cause an OOPS, plus
  an additional bug fix caught by fuzz testing"

* tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix crash when a directory's i_size is too small
  ext4: add missing error check in __ext4_new_inode()
  ext4: fix fdatasync(2) after fallocate(2) operation
  ext4: support fast symlinks from ext3 file systems

[ Note, this is a Git cherry-pick of the following commit:

    d17a1d97: ("x86/mm/kasan: don't use vmemmap_populate() to initialize shadow")

  ... for easier x86 PTI code testing and back-porting. ]

The KASAN shadow is currently mapped using vmemmap_populate() since that
provides a semi-convenient way to map pages into init_top_pgt.  However,
since that no longer zeroes the mapped pages, it is not suitable for
KASAN, which requires zeroed shadow memory.

Add kasan_populate_shadow() interface and use it instead of
vmemmap_populate().  Besides, this allows us to take advantage of
gigantic pages and use them to populate the shadow, which should save us
some memory wasted on page tables and reduce TLB pressure.

Link: http://lkml.kernel.org/r/20171103185147.2688-2-pasha.tatashin@oracle.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

[ Note, this is a Git cherry-pick of the following commit:

    506458ef ("locking/barriers: Convert users of lockless_dereference() to READ_ONCE()")

  ... for easier x86 PTI code testing and back-porting. ]

READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it
can be used instead of lockless_dereference() without any change in
semantics.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

[ Note, this is a Git cherry-pick of the following commit:

    76ebbe78 ("locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()")

  ... for easier x86 PTI code testing and back-porting. ]

In preparation for the removal of lockless_dereference(), which is the
same as READ_ONCE() on all architectures other than Alpha, add an
implicit smp_read_barrier_depends() to READ_ONCE() so that it can be
used to head dependency chains on all architectures.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-3-git-send-email-will.deacon@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

[ Note, this is a Git cherry-pick of the following commit:

    a23f06f0 ("bpf: fix build issues on um due to mising bpf_perf_event.h")

  ... for easier x86 PTI code testing and back-porting. ]

Since c895f6f7 ("bpf: correct broken uapi for
BPF_PROG_TYPE_PERF_EVENT program type") um (uml) won't build
on i386 or x86_64:

  [...]
    CC      init/main.o
  In file included from ../include/linux/perf_event.h:18:0,
                   from ../include/linux/trace_events.h:10,
                   from ../include/trace/syscall.h:7,
                   from ../include/linux/syscalls.h:82,
                   from ../init/main.c:20:
  ../include/uapi/linux/bpf_perf_event.h:11:32: fatal error:
  asm/bpf_perf_event.h: No such file or directory #include
  <asm/bpf_perf_event.h>
  [...]

Lets add missing bpf_perf_event.h also to um arch. This seems
to be the only one still missing.

Fixes: c895f6f7 ("bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type")
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Suggested-by: NRichard Weinberger <richard@sigma-star.at>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Tested-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Richard Weinberger <richard@sigma-star.at>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

[ Note, this is a Git cherry-pick of the following commit:

    a47ba4d7 ("perf/x86: Enable free running PEBS for REGS_USER/INTR")

  ... for easier x86 PTI code testing and back-porting. ]

Currently free running PEBS is disabled when user or interrupt
registers are requested. Most of the registers are actually
available in the PEBS record and can be supported.

So we just need to check for the supported registers and then
allow it: it is all except for the segment register.

For user registers this only works when the counter is limited
to ring 3 only, so this also needs to be checked.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170831214630.21892-1-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

[ Note, this is a Git cherry-pick of the following commit:

    2b67799bdf25 ("x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD")

  ... for easier x86 PTI code testing and back-porting. ]

The latest AMD AMD64 Architecture Programmer's Manual
adds a CPUID feature XSaveErPtr (CPUID_Fn80000008_EBX[2]).

If this feature is set, the FXSAVE, XSAVE, FXSAVEOPT, XSAVEC, XSAVES
/ FXRSTOR, XRSTOR, XRSTORS always save/restore error pointers,
thus making the X86_BUG_FXSAVE_LEAK workaround obsolete on such CPUs.
Signed-Off-By: NRudolf Marek <r.marek@assembler.cz>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Tested-by: NBorislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/bdcebe90-62c5-1f05-083c-eba7f08b2540@assembler.czSigned-off-by: NIngo Molnar <mingo@kernel.org>

[ Note, this is a Git cherry-pick of the following commit: (limited to the cpufeatures.h file)

    3522c2a6 ("x86/cpufeature: Add User-Mode Instruction Prevention definitions")

  ... for easier x86 PTI code testing and back-porting. ]

User-Mode Instruction Prevention is a security feature present in new
Intel processors that, when set, prevents the execution of a subset of
instructions if such instructions are executed in user mode (CPL > 0).
Attempting to execute such instructions causes a general protection
exception.

The subset of instructions comprises:

 * SGDT - Store Global Descriptor Table
 * SIDT - Store Interrupt Descriptor Table
 * SLDT - Store Local Descriptor Table
 * SMSW - Store Machine Status Word
 * STR  - Store Task Register

This feature is also added to the list of disabled-features to allow
a cleaner handling of build-time configuration.
Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chen Yucong <slaoub@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: ricardo.neri@intel.com
Link: http://lkml.kernel.org/r/1509935277-22138-7-git-send-email-ricardo.neri-calderon@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge a minimal set of virt cleanups, for a base for the MM isolation patches.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Conflicts:
	arch/x86/kernel/cpu/Makefile
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull in a minimal set of v4.15 entry code changes, for a base for the MM isolation patches.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We'd like to use the 'PTI' acronym for 'Page Table Isolation' - free up the
namespace by renaming the <linux/pti.h> driver header to <linux/intel-pti.h>.

(Also standardize the header guard name while at it.)

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: J Freyensee <james_p_freyensee@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull rdma fixes from Jason Gunthorpe:
 "More fixes from testing done on the rc kernel, including more SELinux
  testing. Looking forward, lockdep found regression today in ipoib
  which is still being fixed.

  Summary:

   - Fix for SELinux on the umad SMI path. Some old hardware does not
     fill the PKey properly exposing another bug in the newer SELinux
     code.

   - Check the input port as we can exceed array bounds from this user
     supplied value

   - Users are unable to use the hash field support as they want due to
     incorrect checks on the field restrictions, correct that so the
     feature works as intended

   - User triggerable oops in the NETLINK_RDMA handler

   - cxgb4 driver fix for a bad interaction with CQ flushing in iser
     caused by patches in this merge window, and bad CQ flushing during
     normal close.

   - Unbalanced memalloc_noio in ipoib in an error path"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/ipoib: Restore MM behavior in case of tx_ring allocation failure
  iw_cxgb4: only insert drain cqes if wq is flushed
  iw_cxgb4: only clear the ARMED bit if a notification is needed
  RDMA/netlink: Fix general protection fault
  IB/mlx4: Fix RSS hash fields restrictions
  IB/core: Don't enforce PKey security on SMI MADs
  IB/core: Bound check alternate path port number

Pull i2c fixes from Wolfram Sang:
 "Two bugfixes for the AT24 I2C eeprom driver and some minor corrections
  for I2C bus drivers"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: piix4: Fix port number check on release
  i2c: stm32: Fix copyrights
  i2c-cht-wc: constify platform_device_id
  eeprom: at24: change nvmem stride to 1
  eeprom: at24: fix I2C device selection for runtime PM

Pull NFS client fixes from Anna Schumaker:
 "This has two stable bugfixes, one to fix a BUG_ON() when
  nfs_commit_inode() is called with no outstanding commit requests and
  another to fix a race in the SUNRPC receive codepath.

  Additionally, there are also fixes for an NFS client deadlock and an
  xprtrdma performance regression.

  Summary:

  Stable bugfixes:
   - NFS: Avoid a BUG_ON() in nfs_commit_inode() by not waiting for a
     commit in the case that there were no commit requests.
   - SUNRPC: Fix a race in the receive code path

  Other fixes:
   - NFS: Fix a deadlock in nfs client initialization
   - xprtrdma: Fix a performance regression for small IOs"

* tag 'nfs-for-4.15-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  SUNRPC: Fix a race in the receive code path
  nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests
  xprtrdma: Spread reply processing over more CPUs
  nfs: fix a deadlock in nfs client initialization