... and move them over to fs/timerfd.c.  Cleaner and easier
that way...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

ppc is stepping into a nasal daemon territory a bit...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

conditional on OLD_SIGACTION/COMPAT_OLD_SIGACTION
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Again, protected by a temporary config symbol (GENERIC_COMPAT_RT_SIGACTION);
will be gone by the end of series.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Only alpha and sparc are unusual - they have ka_restorer in it.
And nobody needs that exposed to userland.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and make it unconditional - we want the sucker on all biarch
platforms, really.  All kinds of wrappers and private implementations
can go now; fortunately, they don't cause name conflicts, so we can
do that one first without any bisect hazards.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

C ABI violations on sparc, ppc and mips
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

In principle, C ABI violation on ppc and mips...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

conditional on OLD_SIGSUSPEND/OLD_SIGSUSPEND3, depending on which
variety of that fossil is needed.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

conditional on GENERIC_COMPAT_RT_SIGQUEUEINFO; by the end of that series
it will become the same thing as COMPAT and conditional will die out.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

conditional on GENERIC_COMPAT_RT_SIGPENDING; by the end of that series
it will become the same thing as COMPAT and conditional will die out.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

conditional on GENERIC_COMPAT_RT_SIGPROCMASK; by the end of that series
it will become the same thing as COMPAT and conditional will die out.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* pull compat version alongside with the native one
* make little-endian compat variant just call the native
* don't bother with separate conditional for compat (both native and
compat are going to become unconditional very soon).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

	Switch from __ARCH_WANT_SYS_RT_SIGACTION to opposite
(!CONFIG_ODD_RT_SIGACTION); the only two architectures that
need it are alpha and sparc.  The reason for use of CONFIG_...
instead of __ARCH_... is that it's needed only kernel-side
and doing it that way avoids a mess with include order on many
architectures.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

again, strictly speaking we are in nasal daemon territory on ppc
and mips - we need to sign-extend int arguments.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull misc syscall fixes from Al Viro:

 - compat syscall fixes (discussed back in December)

 - a couple of "make life easier for sigaltstack stuff by reducing
   inter-tree dependencies"

 - fix up compiler/asmlinkage calling convention disagreement of
   sys_clone()

 - misc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  sys_clone() needs asmlinkage_protect
  make sure that /linuxrc has std{in,out,err}
  x32: fix sigtimedwait
  x32: fix waitid()
  switch compat_sys_wait4() and compat_sys_waitid() to COMPAT_SYSCALL_DEFINE
  switch compat_sys_sigaltstack() to COMPAT_SYSCALL_DEFINE
  CONFIG_GENERIC_SIGALTSTACK build breakage with asm-generic/syscalls.h
  Ensure that kernel_init_freeable() is not inlined into non __init code

The ia64 function "thread_matches()" has no users since commit
e868a55c ("[IA64] remove find_thread_for_addr()").  Remove it.

This allows us to make ptrace_check_attach() static to kernel/ptrace.c,
which is good since we'll need to change the semantics of it and fix up
all the callers.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull USB fixes from Greg Kroah-Hartman:
 "Here are 3 USB patches for 3.8-rc4.  Two of them are new device id
  patches, and the third fixes a reported oops in the io_ti USB serial
  driver"

* tag 'usb-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: io_ti: Fix NULL dereference in chase_port()
  USB: option: add TP-LINK HSUPA Modem MA180
  USB: option: blacklist network interface on ONDA MT8205 4G LTE

Pull tty/serial fixes from Greg Kroah-Hartman:
 "Here are a few tty/serial driver fixes for 3.8-rc4 that resolve a
  number of problems that people have been having, including the ptys
  ioctl issue that is a regression fix"

* tag 'tty-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  8250/16?50: Add support for Broadcom TruManage redirected serial port
  pty: return EINVAL for TIOCGPTN for BSD ptys
  serial:ifx6x60:Keep word size accordance with SPI controller
  tty: 8250_dw: Fix inverted arguments to serial_out in IRQ handler
  serial: samsung: remove redundant setting of line config during port reset
  serial:ifx6x60:Delete SPI timer when shut down port
  tty/8250: The correct device id for this card is 0x0022
  tty/8250: pbn_b0_8_1152000_200 is supposed to be an 8 port definition
  tty: serial: vt8500: fix return value check in vt8500_serial_probe()
  serial: mxs-auart: Index is unsigned
  mxs: uart: fix setting RTS from software

Pull staging driver bugfixes from Greg Kroah-Hartman:
 "Here are some bugfixes for the drivers/staging tree for 3.8-rc4.

  Nothing major, just a number of small fixes for problems that people
  have reported, including finally tracking down the root of the 64/32
  bit problem with the vt6656 that has been driving people crazy for a
  while"

* tag 'staging-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging/sb105x: PARPORT config is not good enough must use PARPORT_PC
  staging: wlan-ng: Fix clamping of returned SSID length
  staging: vt6656: Fix inconsistent structure packing
  staging:iio:adis16080: Perform sign extension
  iio: mxs-lradc: indexes are unsigned

Pull char/misc driver fixes from Greg Kroah-Hartman:
 "Here are two hyperv patches for 3.8-rc4 that fix some reported
  problems hv_balloon driver"

* tag 'char-misc-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Drivers: hv: balloon: Fix a memory leak
  Drivers: hv: balloon: Fix a bug in the definition of struct dm_info_msg

Merge tag 'stable/for-linus-3.8-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen fixes from Konrad Rzeszutek Wilk:
 - CVE-2013-0190/XSA-40 (or stack corruption for 32-bit PV kernels)
 - Fix racy vma access spotted by Al Viro
 - Fix mmap batch ioctl potentially resulting in large O(n) page allcations.
 - Fix vcpu online/offline BUG:scheduling while atomic..
 - Fix unbound buffer scanning for more than 32 vCPUs.
 - Fix grant table being incorrectly initialized
 - Fix incorrect check in pciback
 - Allow privcmd in backend domains.

Fix up whitespace conflict due to ugly merge resolution in Xen tree in
arch/arm/xen/enlighten.c

* tag 'stable/for-linus-3.8-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: Fix stack corruption in xen_failsafe_callback for 32bit PVOPS guests.
  Revert "xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic."
  xen/gntdev: remove erronous use of copy_to_user
  xen/gntdev: correctly unmap unlinked maps in mmu notifier
  xen/gntdev: fix unsafe vma access
  xen/privcmd: Fix mmap batch ioctl.
  Xen: properly bound buffer access when parsing cpu/*/availability
  xen/grant-table: correctly initialize grant table version 1
  x86/xen : Fix the wrong check in pciback
  xen/privcmd: Relax access control in privcmd_ioctl_mmap

Pull m68knommu arch fixes from Greg Ungerer:
 "This contains a couple of fixes, both affecting compilation of non-mmu
  m68k targets."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: fix conditional use of init_pointer_table
  m68knommu: add KMAP definitions for non-MMU definitions

Commit 816422ad ("asm-generic, mm: pgtable: consolidate zero page
helpers") broke the compile on MIPS if SPARSEMEM is enabled.  We get
this:

  In file included from arch/mips/include/asm/pgtable.h:552,
                   from include/linux/mm.h:44,
                   from arch/mips/kernel/asm-offsets.c:14:
  include/asm-generic/pgtable.h: In function 'my_zero_pfn':
  include/asm-generic/pgtable.h:466: error: implicit declaration of function 'page_to_section'
  In file included from arch/mips/kernel/asm-offsets.c:14:
  include/linux/mm.h: At top level:
  include/linux/mm.h:738: error: conflicting types for 'page_to_section'
  include/asm-generic/pgtable.h:466: note: previous implicit declaration of 'page_to_section' was here

Due header files inter-dependencies, the only way I see to fix it is
convert my_zero_pfn() for __HAVE_COLOR_ZERO_PAGE to macros.
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NDavid Daney <david.daney@cavium.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The tty is NULL when the port is hanging up.
chase_port() needs to check for this.

This patch is intended for stable series.
The behavior was observed and tested in Linux 3.2 and 3.7.1.

Johan Hovold submitted a more elaborate patch for the mainline kernel.

[   56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84
[   56.278811] usb 1-1: USB disconnect, device number 3
[   56.278856] usb 1-1: edge_bulk_in_callback - stopping read!
[   56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8
[   56.280536] IP: [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0
[   56.282085] Oops: 0002 [#1] SMP
[   56.282744] Modules linked in:
[   56.283512] CPU 1
[   56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox
[   56.283512] RIP: 0010:[<ffffffff8144e62a>]  [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.283512] RSP: 0018:ffff88001fa99ab0  EFLAGS: 00010046
[   56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064
[   56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8
[   56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000
[   56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0
[   56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4
[   56.283512] FS:  0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000
[   56.283512] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0
[   56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80)
[   56.283512] Stack:
[   56.283512]  0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c
[   56.283512]  ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001
[   56.283512]  ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296
[   56.283512] Call Trace:
[   56.283512]  [<ffffffff810578ec>] ? add_wait_queue+0x12/0x3c
[   56.283512]  [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28
[   56.283512]  [<ffffffff812ffe81>] ? chase_port+0x84/0x2d6
[   56.283512]  [<ffffffff81063f27>] ? try_to_wake_up+0x199/0x199
[   56.283512]  [<ffffffff81263a5c>] ? tty_ldisc_hangup+0x222/0x298
[   56.283512]  [<ffffffff81300171>] ? edge_close+0x64/0x129
[   56.283512]  [<ffffffff810612f7>] ? __wake_up+0x35/0x46
[   56.283512]  [<ffffffff8106135b>] ? should_resched+0x5/0x23
[   56.283512]  [<ffffffff81264916>] ? tty_port_shutdown+0x39/0x44
[   56.283512]  [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28
[   56.283512]  [<ffffffff8125d38c>] ? __tty_hangup+0x307/0x351
[   56.283512]  [<ffffffff812e6ddc>] ? usb_hcd_flush_endpoint+0xde/0xed
[   56.283512]  [<ffffffff8144e625>] ? _raw_spin_lock_irqsave+0x14/0x35
[   56.283512]  [<ffffffff812fd361>] ? usb_serial_disconnect+0x57/0xc2
[   56.283512]  [<ffffffff812ea99b>] ? usb_unbind_interface+0x5c/0x131
[   56.283512]  [<ffffffff8128d738>] ? __device_release_driver+0x7f/0xd5
[   56.283512]  [<ffffffff8128d9cd>] ? device_release_driver+0x1a/0x25
[   56.283512]  [<ffffffff8128d393>] ? bus_remove_device+0xd2/0xe7
[   56.283512]  [<ffffffff8128b7a3>] ? device_del+0x119/0x167
[   56.283512]  [<ffffffff812e8d9d>] ? usb_disable_device+0x6a/0x180
[   56.283512]  [<ffffffff812e2ae0>] ? usb_disconnect+0x81/0xe6
[   56.283512]  [<ffffffff812e4435>] ? hub_thread+0x577/0xe82
[   56.283512]  [<ffffffff8144daa7>] ? __schedule+0x490/0x4be
[   56.283512]  [<ffffffff8105798f>] ? abort_exclusive_wait+0x79/0x79
[   56.283512]  [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f
[   56.283512]  [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f
[   56.283512]  [<ffffffff810570b4>] ? kthread+0x81/0x89
[   56.283512]  [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c
[   56.283512]  [<ffffffff8145387c>] ? ret_from_fork+0x7c/0xb0
[   56.283512]  [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c
[   56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00
<f0> 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66
[   56.283512] RIP  [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35
[   56.283512]  RSP <ffff88001fa99ab0>
[   56.283512] CR2: 00000000000001c8
[   56.283512] ---[ end trace 49714df27e1679ce ]---
Signed-off-by: NWolfgang Frisch <wfpub@roembden.net>
Cc: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver description files gives these names to the vendor specific
functions on this modem:

 Diagnostics VID_2357&PID_0201&MI_00
 NMEA        VID_2357&PID_0201&MI_01
 Modem       VID_2357&PID_0201&MI_03
 Networkcard VID_2357&PID_0201&MI_04
Reported-by: NThomas Schäfer <tschaefer@t-online.de>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver description files gives these names to the vendor specific
functions on this modem:

 Diag   VID_19D2&PID_0265&MI_00
 NMEA   VID_19D2&PID_0265&MI_01
 AT cmd VID_19D2&PID_0265&MI_02
 Modem  VID_19D2&PID_0265&MI_03
 Net    VID_19D2&PID_0265&MI_04
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The sb105x driver calls parport_pc_probe_port() which isn't defined if
PARPORT_PC isn't enabled. Protecting it with CONFIG_PARPORT is not good
enough, must protect it with CONFIG_PARPORT_PC.
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 2e254212 broke listing of available network names, since it
clamped the length of the returned SSID to WLAN_BSSID_LEN (6) instead of
WLAN_SSID_MAXLEN (32).

https://bugzilla.kernel.org/show_bug.cgi?id=52501Signed-off-by: NTormod Volden <debian.tormod@gmail.com>
Cc: stable <stable@vger.kernel.org> # 3.4+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-fixes-for-3.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

  Second round of fixes for IIO post 3.8-rc1

  Two tiny fixes
  * A build warning fix due to signed / unsigned comparison
  * Missing sign extension in adis16080

Add support for the UART device present in Broadcom TruManage capable
NetXtreme chips (ie: 5761m 5762, and 5725).

This implementation has a hidden transmit FIFO, so running in single-byte
interrupt mode results in too many interrupts.  The UART_CAP_HFIFO
capability was added to track this.  It continues to reload the THR as long
as the THRE and TSRE bits are set in the LSR up to a specified limit (1024
is used here).
Signed-off-by: NStephen Hurd <shurd@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit bbb63c51 (drivers:tty:fix up
ENOIOCTLCMD error handling) changed the default return value from tty
ioctl to be ENOTTY and not EINVAL. This is appropriate.

But in case of TIOCGPTN for the old BSD ptys glibc started failing
because it expects EINVAL to be returned. Only then it continues to
obtain the pts name the other way around.

So fix this case by explicit return of EINVAL in this case.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Reported-by: NFlorian Westphal <fw@strlen.de>
Cc: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@vger.kernel.org> # 3.7+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

vt6656 has several headers that use the #pragma pack(1) directive to
enable structure packing, but never disable it.  The layout of
structures defined in other headers can then depend on which order the
various headers are included in, breaking the One Definition Rule.

In practice this resulted in crashes on x86_64 until the order of header
inclusion was changed for some files in commit 11d404cb ('staging:
vt6656: fix headers and add cfg80211.').  But we need a proper fix that
won't be affected by future changes to the order of inclusion.

This removes the #pragma pack(1) directives and adds __packed to the
structure definitions for which packing appears to have been intended.
Reported-and-tested-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The send buffer was being leaked; fix it.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reported-by: NJason Wang <jasowang@redhat.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>