- 29 11月, 2012 40 次提交
-
-
由 Inki Dae 提交于
With iommu, buffer->dma_addr has device addres so this patch fixes for physical address to be set to fix.smem_start always. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Ben Widawsky 提交于
This bug was introduced by me: commit e76e9aeb Author: Ben Widawsky <ben@bwidawsk.net> Date: Sun Nov 4 09:21:27 2012 -0800 drm/i915: Stop using AGP layer for GEN6+ The existing code uses memset_io which follows memset semantics in only guaranteeing a write of individual bytes. Since a PTE entry is 4 bytes, this can only be correct if the scratch page address is 0. This caused unsightly errors when we clear the range at load time, though I'm not really sure what the heck is referencing that memory anyway. I caught this is because I believe we have some other bug where the display is doing reads of memory we feel should be cleared (or we are relying on scratch pages to be a specific value). Signed-off-by: NBen Widawsky <ben@bwidawsk.net> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Jingoo Han 提交于
Fixed build warning as below: drivers/gpu/drm/drm_pci.c: In function 'drm_pcie_get_speed_cap_mask': drivers/gpu/drm/drm_pci.c:496:9: warning: 'lnkcap' may be used uninitialized in this function [-Wuninitialized] drivers/gpu/drm/drm_pci.c:497:10: warning: 'lnkcap2' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Sachin Kamat 提交于
core/device.h was included twice. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Sachin Kamat 提交于
nouveau_ttm.h was included twice. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Fixes a PCE0 page fault noticed on NVD9 during module unload. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Daniel J Blueman 提交于
On 3.7-rc6, add missing newline to to prevent the following kernel log line getting appended to the current one after switching the integrated GPU and suspending the discrete GPU. Signed-off-by: NDaniel J Blueman <daniel@quora.org> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Slusarz 提交于
These objects leak VRAM - but only on module unload. Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Slusarz 提交于
Fixes GART leak (as accounted by nouveau_drm.gem.gart_available). Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Slusarz 提交于
Copy/pasted from nouveau_gem_new. Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Slusarz 提交于
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Martin Peres 提交于
It fixes a bug that would have been introduced when adding more sudevs/engines. Signed-off-by: NMartin Peres <martin.peres@labri.fr> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
NVIDIA also appear to use the same class on Fermi/Kepler for PPP. Will allow use of the engine if firmware (nvXX_fuc086) provided. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Maarten Lankhorst 提交于
Will allow use of the engine if firmware (nvXX_fuc086) provided. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Maarten Lankhorst 提交于
Will allow use of the engine if firmware (nvXX_fuc085) provided. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Maarten Lankhorst 提交于
Will allow use of the engine if firmware (nvXX_fuc084) provided. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Later chipsets use falcon anyway, and I can't currently see a good need for a shared base class. PPP will get the same treatment once Maarten's patches are merged. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
No support for the class yet, but will be pulled in with Maarten's Fermi vdec patches. The Kepler PPP class is identical. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Will allow use of the engine if firmware (nvXX_fuc085) provided. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Will allow use of the engine if firmware (nvXX_fuc084) provided. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Previously, if either vram/gart handles were specified as ~0, the ioctl call would fail. In order to hack engine selection into the ioctl for kepler, we now define (fb_ctxdma_handle == ~0) to mean "engine mask is in tt_ctxdma_handle". This approach also allows new userspace to detect lack of support for non-PGRAPH channels on older kernels. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
nv50_fb_trap() will now be called automagically by the mc intr handler, rather than each engine's handler having to check for traps manually. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
nva3/nvc0 are using falcon, nve0 is now using engine directly. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Dave Airlie 提交于
This is a precursor to dynamic power management support for nouveau, we need to use pm ops for that, so first convert the driver to using pm ops interfaces. Signed-off-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Dave Airlie 提交于
This is required to decide if we can auto-powerdown and how to implement it. Signed-off-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Ported from original nv50 commit by Christoph, with added support for the setting on later chipsets. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Unused, and caused a race with evo_sync(). Will revisit using it properly later on. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-