- 06 12月, 2018 11 次提交
-
-
由 Andreas Dannenberg 提交于
commit 52777156 upstream. According to the current device datasheet (TI Lit # SLAS831D, revised March 2018) the value written to the device's PAGE register to trigger a complete register reset should be 0xfe, not 0xff. So go ahead and update to the correct value. Reported-by: NStephane Le Provost <stephane.leprovost@mediatek.com> Tested-by: NStephane Le Provost <stephane.leprovost@mediatek.com> Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com> Acked-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NMark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hans de Goede 提交于
commit a182ecd3 upstream. Some boards such as the Swanky model Chromebooks use pmc_plt_clk_0 for the mclk instead of pmc_plt_clk_3. This commit adds a DMI based quirk for this. This fixing audio no longer working on these devices after commit 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") that commit fixes us unnecessary keeping unused clocks on, but in case of the Swanky that was breaking audio support since we were not using the right clock in the cht_bsw_max98090_ti machine driver. Cc: stable@vger.kernel.org Fixes: 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Reported-and-tested-by: NDean Wallace <duffydack73@gmail.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMark Brown <broonie@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Girija Kumar Kasinadhuni 提交于
commit e8ed64b0 upstream. This device makes a loud buzzing sound when a headphone is inserted while playing audio at full volume through the speaker. Fixes: bbf8ff6b ("ALSA: hda/realtek - Fixup for HP x360 laptops with B&O speakers") Signed-off-by: NGirija Kumar Kasinadhuni <gkumar@neverware.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hui Wang 提交于
commit c4cfcf6f upstream. We have several Lenovo laptops with the codec alc285, when playing sound via headphone, we can hear click/pop noise in the headphone, if we let the headphone share the DAC of NID 0x2 with the speaker, the noise disappears. The Lenovo laptops here include P52, P72, X1 yoda2 and X1 carbon. I have tried to set preferred_dacs and override_conn, but neither of them worked. Thanks for Kailang, he told me to invalidate the NID 0x3 through override_wcaps. BugLink: https://bugs.launchpad.net/bugs/1805079 Cc: <stable@vger.kernel.org> Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Anisse Astier 提交于
commit 8cd65271 upstream. MSI Cubi N 8GL (MS-B171) needs the same fixup as its older model, the MS-B120, in order for the headset mic to be properly detected. They both use a single 3-way jack for both mic and headset with an ALC283 codec, with the same pins used. Cc: stable@vger.kernel.org Signed-off-by: NAnisse Astier <anisse@astier.eu> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Kailang Yang 提交于
commit 1078bef0 upstream. This patch will enable ALC300. [ It's almost equivalent with other ALC269-compatible ones, and apparently has no loopback mixer -- tiwai ] Signed-off-by: NKailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hans de Goede 提交于
commit 39070a98 upstream. Power-saving is causing plops on audio start/stop on the built-in audio of the nForce 430 based ASRock N68C-S UCC motherboard, add this model to the power_save blacklist. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 Cc: <stable@vger.kernel.org> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Takashi Iwai 提交于
commit 9a20332ab373b1f8f947e0a9c923652b32dab031 upstream. Some spurious calls of snd_free_pages() have been overlooked and remain in the error paths of sparc cs4231 driver code. Since runtime->dma_area is managed by the PCM core helper, we shouldn't release manually. Drop the superfluous calls. Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Takashi Iwai 提交于
commit e1a7bfe3807974e66f971f2589d4e0197ec0fced upstream. The procedure for adding a user control element has some window opened for race against the concurrent removal of a user element. This was caught by syzkaller, hitting a KASAN use-after-free error. This patch addresses the bug by wrapping the whole procedure to add a user control element with the card->controls_rwsem, instead of only around the increment of card->user_ctl_count. This required a slight code refactoring, too. The function snd_ctl_add() is split to two parts: a core function to add the control element and a part calling it. The former is called from the function for adding a user control element inside the controls_rwsem. One change to be noted is that snd_ctl_notify() for adding a control element gets called inside the controls_rwsem as well while it was called outside the rwsem. But this should be OK, as snd_ctl_notify() takes another (finer) rwlock instead of rwsem, and the call of snd_ctl_notify() inside rwsem is already done in another code path. Reported-by: syzbot+dc09047bce3820621ba2@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Takashi Iwai 提交于
commit 7194eda1ba0872d917faf3b322540b4f57f11ba5 upstream. The function snd_ac97_put_spsa() gets the bit shift value from the associated private_value, but it extracts too much; the current code extracts 8 bit values in bits 8-15, but this is a combination of two nibbles (bits 8-11 and bits 12-15) for left and right shifts. Due to the incorrect bits extraction, the actual shift may go beyond the 32bit value, as spotted recently by UBSAN check: UBSAN: Undefined behaviour in sound/pci/ac97/ac97_codec.c:836:7 shift exponent 68 is too large for 32-bit type 'int' This patch fixes the shift value extraction by masking the properly with 0x0f instead of 0xff. Reported-and-tested-by: NMeelis Roos <mroos@linux.ee> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Takashi Iwai 提交于
commit 7b69154171b407844c273ab4c10b5f0ddcd6aa29 upstream. Some spurious calls of snd_free_pages() have been overlooked and remain in the error paths of wss driver code. Since runtime->dma_area is managed by the PCM core helper, we shouldn't release manually. Drop the superfluous calls. Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 01 12月, 2018 1 次提交
-
-
由 Takashi Iwai 提交于
commit 65766ee0bf7fe8b3be80e2e1c3ef54ad59b29476 upstream. PCM OSS layer may allocate a few temporary buffers, one for the core read/write and another for the conversions via plugins. Currently both are allocated via vmalloc(). But as the allocation size is equivalent with the PCM period size, the required size might be quite small, depending on the application. This patch replaces these vmalloc() calls with kvzalloc() for covering small period sizes better. Also, we use "z"-alloc variant here for addressing the possible uninitialized access reported by syzkaller. Reported-by: syzbot+1cb36954e127c98dd037@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 27 11月, 2018 2 次提交
-
-
由 Takashi Iwai 提交于
commit d99501b8 upstream. We need to call pci_iounmap() instead of iounmap() for the regions obtained via pci_iomap() call for some archs that need special treatment. Fixes: aa31704f ("ALSA: hda/ca0132: Add PCI region2 iomap for SBZ") Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Takashi Iwai 提交于
commit 563785edfcef02b566e64fb5292c74c1600808aa upstream. HP Pavilion 15 (103c:820d) with ALC295 codec requires the quirk for the mute LED control over mic3 pin. Added the corresponding quirk entry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201653 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 11月, 2018 11 次提交
-
-
由 Daniel Mack 提交于
commit 747df19747bc9752cd40b9cce761e17a033aa5c2 upstream. The ESD watchdog code in sta32x_watchdog() dereferences the pointer which is never assigned. This is a regression from a1be4cea ("ASoC: sta32x: Convert to direct regmap API usage.") which went unnoticed since nobody seems to use that ESD workaround. Fixes: a1be4cea ("ASoC: sta32x: Convert to direct regmap API usage.") Signed-off-by: NDaniel Mack <daniel@zonque.org> Signed-off-by: NMark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Takashi Iwai 提交于
commit 9c80c5a8831471e0a3e139aad1b0d4c0fdc50b2f upstream. skl_tplg_get_token() misses a break in the big switch() block for SKL_TKN_U8_CORE_ID entry. Spotted nicely by -Wimplicit-fallthrough compiler option. Fixes: 6277e832 ("ASoC: Intel: Skylake: Parse vendor tokens to build module data") Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NMark Brown <broonie@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Takashi Iwai 提交于
[ Upstream commit 78c9be61 ] Introduce a new flag, uc_buffer, to indicate that the controller requires the non-cached pages for stream buffers, either as a chip-specific requirement or specified via snoop=0 option. This improves the code-readability. Also, this patch fixes the incorrect behavior for C-Media chip where the stream buffers were never handled as non-cached due to the check of driver_type even if you pass snoop=0 option. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Akshu Agrawal 提交于
[ Upstream commit c50535ed ] alsa_conformance_test -C hw:0,4 -p 1024 --debug would sometime show: TIME_DIFF(s) HW_LEVEL READ RATE 0.000095970 1024 1024 10670001.041992 0.042609555 1024 2048 24032.168372 0.021330364 1024 3072 48006.681930 0.021339559 1024 4096 47985.996337 The issue is that in dma pointer function we can have stale value of the register for current descriptor of channel. The register retains the number of the last descriptor that was transferred. Fix ensures that we report position, 0, till the one period worth of data is transferred. After one period of data, in handler of period completion interrupt we update the config and correct value of descriptor starts reflecting. Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: NMark Brown <broonie@kernel.org> Signed-off-by: NSasha Levin <sashal@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Takashi Iwai 提交于
commit 5e93a125 upstream. Since the commit c647f806 ("ALSA: hda - Allow multiple ADCs for mic mute LED controls") we allow enabling the mic mute LED with multiple ADCs. The commit changed the function return value to be zero or a negative error, while this change was overlooked in the thinkpad_acpi helper code where it still expects a positive return value for success. This eventually leads to a NULL dereference on a system that has only a mic mute LED. This patch corrects the return value check in the corresponding code as well. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201621 Fixes: c647f806 ("ALSA: hda - Allow multiple ADCs for mic mute LED controls") Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alex Stanoev 提交于
commit ac237c28d5ac1b241d58b1b7b4b9fa10efb22fb5 upstream. The Creative Audigy SE (SB0570) card currently exhibits an audible pop whenever playback is stopped or resumed, or during silent periods of an audio stream. Initialise the IZD bit to the 0 to eliminate these pops. The Infinite Zero Detection (IZD) feature on the DAC causes the output to be shunted to Vcap after 2048 samples of silence. This discharges the AC coupling capacitor through the output and causes the aforementioned pop/click noise. The behaviour of the IZD bit is described on page 15 of the WM8768GEDS datasheet: "With IZD=1, applying MUTE for 1024 consecutive input samples will cause all outputs to be connected directly to VCAP. This also happens if 2048 consecutive zero input samples are applied to all 6 channels, and IZD=0. It will be removed as soon as any channel receives a non-zero input". I believe the second sentence might be referring to IZD=1 instead of IZD=0 given the observed behaviour of the card. This change should make the DAC initialisation consistent with Creative's Windows driver, as this popping persists when initialising the card in Linux and soft rebooting into Windows, but is not present on a cold boot to Windows. Signed-off-by: NAlex Stanoev <alex@astanoev.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hans de Goede 提交于
commit 5cb6b5fc013ee711d19bfc4e9deb8d6ae80741db upstream. Power-saving is causing plops on audio start/stop on Dell Precision T3600 laptops and Intel DZ77BH boards, add these to the power_save blacklist. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104Signed-off-by: NHans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jeremy Cline 提交于
commit e7bb6ad5 upstream. The Lenovo G50-30, like other G50 models, has a Conexant codec that requires a quirk for its inverted stereo dmic. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1249364Reported-by: NAlexander Ploumistos <alex.ploumistos@gmail.com> Tested-by: NAlexander Ploumistos <alex.ploumistos@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NJeremy Cline <jcline@redhat.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hui Wang 提交于
commit d06fb562 upstream. The front MIC on the Lenovo M715 can't record sound, after applying the ALC294_FIXUP_LENOVO_MIC_LOCATION, the problem is fixed. So add the pin configuration of this machine to the pin quirk table. Cc: <stable@vger.kernel.org> Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Takashi Iwai 提交于
commit 5b7c5e1f4c36b99d0f694f38b9ad910f520cb7ef upstream. BIOS on ASUS G751 doesn't seem to map the headphone pin (NID 0x16) correctly. Add a quirk to address it, as well as chaining to the previous fix for the microphone. Reported-by: NHåvard <hovardslill@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Takashi Iwai 提交于
commit 11ba6111 upstream. ASUS G751 requires the extra COEF initialization to make it microphone working properly. Reported-and-tested-by: NHåvard <hovardslill@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 10月, 2018 1 次提交
-
-
由 Kai-Heng Feng 提交于
The issue is the same as commit dd9aa335 ("ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO"), the output requires to connect to a node with Amp-out capability. Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue. BugLink: https://bugs.launchpad.net/bugs/1775068Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 9月, 2018 1 次提交
-
-
由 Takashi Iwai 提交于
The timeout of audio component binding was incorrectly specified in msec, not in jiffies, which results in way too shorter timeout than expected. Along with fixing it, add the information print about the binding failure to show the unexpected situation more clearly. Fixes: a57942bf ("ALSA: hda: Make audio component support more generic") Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 9月, 2018 4 次提交
-
-
由 Takashi Sakamoto 提交于
After allocating memory object for response buffer, ALSA fireworks driver has leak of the memory object at error path. This commit releases the object at the error path. Fixes: 7d3c1d59('ALSA: fireworks: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
After finishing discover of stream formats, ALSA OXFW driver has memory leak of allocated memory object at error path. This commit releases the memory object at the error path. Fixes: 6c29230e ('ALSA: oxfw: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
After allocating model-dependent data, ALSA OXFW driver has memory leak of the data at error path. This commit releases the data at the error path. Fixes: 6c29230e ('ALSA: oxfw: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
After allocating model-dependent data for M-Audio FW1814 and ProjectMix I/O, ALSA bebob driver has memory leak at error path. This commit releases the allocated data at the error path. Fixes: 04a2c73c('ALSA: bebob: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 9月, 2018 4 次提交
-
-
由 Takashi Iwai 提交于
The recent change of vga_switcheroo allowed the runtime PM for HD-audio on AMD GPUs, but this also resulted in a regression. When the HD-audio controller driver gets runtime-suspended, HD-audio link is turned off, and the hotplug notification is ignored. This leads to the inconsistent audio state (the connection isn't notified and ELD is ignored). The best fix would be to implement the proper ELD notification via the audio component, but it's still not ready. As a quick workaround, this patch adds the check of runtime_idle and allows the runtime suspend only when the vga_switcheroo is bound with discrete GPU. That is, a system with a single GPU and APU would be again without runtime PM to keep the HD-audio link for the hotplug notification and ELD read out. Also, the codec->auto_runtime_pm flag is set only for the discrete GPU at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is forcibly runtime-PM enabled), so that APU can still get the ELD notification. For identifying which GPU is bound, a new vga_switcheroo client callback, gpu_bound, is implemented. The vga_switcheroo simply calls this when GPU is bound, and tells whether it's dGPU or APU. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945 Fixes: 07f4f97d ("vga_switcheroo: Use device link for HDA controller") Reported-by: NJian-Hong Pan <jian-hong@endlessm.com> Tested-by: NJian-Hong Pan <jian-hong@endlessm.com> Acked-by: NLukas Wunner <lukas@wunner.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: 6c29230e ('ALSA: oxfw: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: b610386c ('ALSA: firewire-tascam: deleyed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Sakamoto 提交于
Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: 86c8dd7f ('ALSA: firewire-digi00x: delayed registration of sound card') Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 9月, 2018 3 次提交
-
-
由 Yu Zhao 提交于
Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which 1) sets bus->chip_init to prevent multiple entrances before device is stopped; 2) enables interrupt. We shouldn't use it for the purpose of resetting device only because 1) when we really want to initialize device, we won't be able to do so; 2) we are ready to handle interrupt yet, and kernel crashes when interrupt comes in. Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset device properly. Fixes: 60767abc ("ASoC: Intel: Skylake: Reset the controller in probe") Reviewed-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NYu Zhao <yuzhao@google.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Yu Zhao 提交于
In snd_hdac_bus_init_chip(), we enable interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has been acquired and irq handler uses the dma buffer, kernel may crash when interrupt comes in. Fix the problem by postponing enabling irq after dma buffer initialization. And warn once on null dma buffer pointer during the initialization. Reviewed-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NYu Zhao <yuzhao@google.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Yu Zhao 提交于
This reverts commit 12eeeb4f. The patch doesn't fix accessing memory with null pointer in skl_interrupt(). There are two problems: 1) skl_init_chip() is called twice, before and after dma buffer is allocate. The first call sets bus->chip_init which prevents the second from initializing bus->corb.buf and rirb.buf from bus->rb.area. 2) snd_hdac_bus_init_chip() enables interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. There is a small window which skl_interrupt() can be called if irq has been acquired. If so, it crashes when using null dma buffer pointers. Will fix the problems in the following patches. Also attaching the crash for future reference. [ 16.949148] general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI <snipped> [ 16.950903] Call Trace: [ 16.950906] <IRQ> [ 16.950918] skl_interrupt+0x19e/0x2d6 [snd_soc_skl] [ 16.950926] ? dma_supported+0xb5/0xb5 [snd_soc_skl] [ 16.950933] __handle_irq_event_percpu+0x27a/0x6c8 [ 16.950937] ? __irq_wake_thread+0x1d1/0x1d1 [ 16.950942] ? __do_softirq+0x57a/0x69e [ 16.950944] handle_irq_event_percpu+0x95/0x1ba [ 16.950948] ? _raw_spin_unlock+0x65/0xdc [ 16.950951] ? __handle_irq_event_percpu+0x6c8/0x6c8 [ 16.950953] ? _raw_spin_unlock+0x65/0xdc [ 16.950957] ? time_cpufreq_notifier+0x483/0x483 [ 16.950959] handle_irq_event+0x89/0x123 [ 16.950962] handle_fasteoi_irq+0x16f/0x425 [ 16.950965] handle_irq+0x1fe/0x28e [ 16.950969] do_IRQ+0x6e/0x12e [ 16.950972] common_interrupt+0x7a/0x7a [ 16.950974] </IRQ> <snipped> [ 16.951031] RIP: snd_hdac_bus_update_rirb+0x19b/0x4cf [snd_hda_core] RSP: ffff88015c807c08 [ 16.951036] ---[ end trace 58bf9ece1775bc92 ]--- Fixes: 2eeeb4f4733b ("ASoC: Intel: Skylake: Acquire irq after RIRB allocation") Signed-off-by: NYu Zhao <yuzhao@google.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 10 9月, 2018 2 次提交
-
-
由 Willy Tarreau 提交于
snd_emu10k1_fx8010_ioctl(SNDRV_EMU10K1_IOCTL_INFO) allocates memory using kmalloc() and partially fills it by calling snd_emu10k1_fx8010_info() before returning the resulting structure to userspace, leaving uninitialized holes. Let's just use kzalloc() here. BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.htmlSigned-off-by: NWilly Tarreau <w@1wt.eu> Cc: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sébastien Szymanski 提交于
The MMTLR bit is in the CS4265_SPDIF_CTL2 register at address 0x12 bit 0 and not at address 0x0 bit 1. Fix this. Signed-off-by: NSébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: NMark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-