- 21 2月, 2007 1 次提交
-
-
由 Antti Seppälä 提交于
This patch changes the initialization of alps tdee4 tuner in flexcop-fe-tuner.c to match what is used in the old driver that was written specifically for Cablestar cards by Patrick Boettcher. This patch should make Cablestar2 work again with recent dvb drivers without breaking other stv0297 based cards. Signed-off-by: NAntti Seppala <ajhseppa@niksula.hut.fi> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 12月, 2006 1 次提交
-
-
由 Michael Krufky 提交于
This patch creates a new atsc tuner module for the LG TDVS-H06xF ATSC tuners, called lgh06xf. The purpose of this change is to reduce some duplicated code, and to allow the lgh06xf tuner code to take advantage of dvb_attach(). As a side effect, the dependency of dvb-bt8xx on dvb-pll has been removed, since the lgh06xf module itself will use dvb-pll, while remaining optional for the dvb-bt8xx driver through the use of DVB_FE_CUSTOMISE Acked-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 9月, 2006 4 次提交
-
-
由 Chris Pascoe 提交于
Address another case where the test in dvb-pll to see if a tuner's PLL responds when attaching may fail. Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew de Quincey 提交于
Remove buggy dvb_detach() macro and replace with unified dvb_frontend_detach() call. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Acked-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew de Quincey 提交于
Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Acked-by: NMichael Krufky <mkrufky@linuxtv.org> Acked-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew de Quincey 提交于
Add dvb_attach() macro and supporting routines Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Acked-by: NMichael Krufky <mkrufky@linuxtv.org> Acked-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 25 6月, 2006 5 次提交
-
-
由 Adrian Bunk 提交于
This patch makes the needlessly global alps_tdee4_stv0297_tuner_set_params() static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Patrick Boettcher 提交于
V4L/DVB (4028): Change dvb_frontend_ops to be a real field instead of a pointer field inside dvb_frontend The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew de Quincey 提交于
Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Attach dvb-pll where possible. Add pll gate control calls where appropriate. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- removed duplicated tuning code for LG TDVS H061F Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 04 3月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
This patch contains the following possible cleanups: - update the Kconfig help to mention the VP310 - merge vp310_attach and mt312_attach into a new vp310_mt312_attach to remove some code duplication Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 27 2月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
This patch contains the following possible cleanups: - update the Kconfig help to mention the VP310 - merge vp310_attach and mt312_attach into a new vp310_mt312_attach to remove some code duplication Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 24 1月, 2006 4 次提交
-
-
由 Michael Krufky 提交于
- rename dvb_pll_tbmv30111in to dvb_pll_samsung_tbmv Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- Kill nxt2002 module in favor of nxt200x. - Repair broken nxt2002 support in the nxt200x module. - Make the flexcop driver use nxt200x instead of the nxt2002 module for the Air2PC 2nd generation PCI card. - Remove the nxt2002 module from cvs and kernel build. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- rename dvb_pll_tbmv30111in to dvb_pll_samsung_tbmv Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- Kill nxt2002 module in favor of nxt200x. - Repair broken nxt2002 support in the nxt200x module. - Make the flexcop driver use nxt200x instead of the nxt2002 module for the Air2PC 2nd generation PCI card. - Remove the nxt2002 module from cvs and kernel build. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 1月, 2006 2 次提交
-
-
由 Michael Krufky 提交于
- minor whitespace cleanups Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Jesper Juhl 提交于
- Here's a small patch to decrease the number of pointer derefs in drivers/media/dvb/b2c2/flexcop-fe-tuner.c Benefits of the patch: - Fewer pointer dereferences should make the code slightly faster. - Size of generated code is smaller - Improved readability Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
- 13 12月, 2005 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Clean up whitespaces at v4l/dvb files Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 11月, 2005 2 次提交
-
-
由 Michael Krufky 提交于
Added support for Air2PC/AirStar 2 ATSC 3rd generation (HD5000) Signed-off-by: NTaylor Jacob <rtjacob@earthlink.net> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew de Quincy 提交于
Remove broken stv0299 enhanced tuning code Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 9月, 2005 2 次提交
-
-
由 Andrew de Quincey 提交于
Add support for TT DVB-C CI card. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Oberritter 提交于
Pass a pointer to the i2c bus to the pll callbacks (stv0299 only). It was not possible to tell which i2c bus should be used if an adapter has multiple frontends on multiple i2c buses. Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2005 1 次提交
-
-
由 Johannes Stezenbach 提交于
Added support for the Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator used in the first generation of Air2PC ATSC PCI-cards/USB-boxes made by B2C2. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 5月, 2005 2 次提交
-
-
由 Johannes Stezenbach 提交于
Fixed DiSeqC switching, which was wrongly taking over from skystar2.c. Thanks to Joerg Riechardt for finding the bug and testing the Fix. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
b2c2/flexcop driver refactoring to support PCI and USB based cards part 2: add modular Flexcop driver Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-