This reverts commit b268daff.

I applied the wrong version of this patch, the proper version
is coming up next.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit e9e4ea74
"net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data"
The Versatile SMSC LAN91C111 is crashing like this:

------------[ cut here ]------------
kernel BUG at /home/linus/linux/drivers/net/ethernet/smsc/smc91x.c:599!
Internal error: Oops - BUG: 0 [#1] ARM
Modules linked in:
CPU: 0 PID: 43 Comm: udhcpc Not tainted 3.13.0-rc1+ #24
task: c6ccfaa0 ti: c6cd0000 task.ti: c6cd0000
PC is at smc_hardware_send_pkt+0x198/0x22c
LR is at smc_hardware_send_pkt+0x24/0x22c
pc : [<c01be324>]    lr : [<c01be1b0>]    psr: 20000013
sp : c6cd1d08  ip : 00000001  fp : 00000000
r10: c02adb08  r9 : 00000000  r8 : c6ced802
r7 : c786fba0  r6 : 00000146  r5 : c8800000  r4 : c78d6000
r3 : 0000000f  r2 : 00000146  r1 : 00000000  r0 : 00000031
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0005317f  Table: 06cf4000  DAC: 00000015
Process udhcpc (pid: 43, stack limit = 0xc6cd01c0)
Stack: (0xc6cd1d08 to 0xc6cd2000)
1d00:                   00000010 c8800000 c78d6000 c786fba0 c78d6000 c01be868
1d20: c01be7a4 00004000 00000000 c786fba0 c6c12b80 c0208554 000004d0 c780fc60
1d40: 00000220 c01fb734 00000000 00000000 00000000 c6c9a440 c6c12b80 c78d6000
1d60: c786fba0 c6c9a440 00000000 c021d1d8 00000000 00000000 c6c12b80 c78d6000
1d80: c786fba0 00000001 c6c9a440 c02087f8 c6c9a4a0 00080008 00000000 00000000
1da0: c78d6000 c786fba0 c78d6000 00000138 00000000 00000000 00000000 00000000
1dc0: 00000000 c027ba74 00000138 00000138 00000001 00000010 c6cedc00 00000000
1de0: 00000008 c7404400 c6cd1eec c6cd1f14 c067a73c c065c0b8 00000000 c067a740
1e00: 01ffffff 002040d0 00000000 00000000 00000000 00000000 00000000 ffffffff
1e20: 43004400 00110022 c6cdef20 c027ae8c c6ccfaa0 be82d65c 00000014 be82d3cc
1e40: 00000000 00000000 00000000 c01f2870 00000000 00000000 00000000 c6cd1e88
1e60: c6ccfaa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
1e80: 00000000 00000000 00000031 c7802310 c7802300 00000138 c7404400 c0771da0
1ea0: 00000000 c6cd1eec c7800340 00000138 be82d65c 00000014 be82d3cc c6cd1f08
1ec0: 00000014 00000000 c7404400 c7404400 00000138 c01f4628 c78d6000 00000000
1ee0: 00000000 be82d3cc 00000138 c6cd1f08 00000014 c6cd1ee4 00000001 00000000
1f00: 00000000 00000000 00080011 00000002 06000000 ffffffff 0000ffff 00000002
1f20: 06000000 ffffffff 0000ffff c00928c8 c065c520 c6cd1f58 00000003 c009299c
1f40: 00000003 c065c520 c7404400 00000000 c7404400 c01f2218 c78106b0 c7441cb0
1f60: 00000000 00000006 c06799fc 00000000 00000000 00000006 00000000 c01f3ee0
1f80: 00000000 00000000 be82d678 be82d65c 00000014 00000001 00000122 c00139c8
1fa0: c6cd0000 c0013840 be82d65c 00000014 00000006 be82d3cc 00000138 00000000
1fc0: be82d65c 00000014 00000001 00000122 00000000 00000000 00018cb1 00000000
1fe0: 00003801 be82d3a8 0003a0c7 b6e9af08 60000010 00000006 00000000 00000000
[<c01be324>] (smc_hardware_send_pkt+0x198/0x22c) from [<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8)
[<c01be868>] (smc_hard_start_xmit+0xc4/0x1e8) from [<c0208554>] (dev_hard_start_xmit+0x460/0x4cc)
[<c0208554>] (dev_hard_start_xmit+0x460/0x4cc) from [<c021d1d8>] (sch_direct_xmit+0x94/0x18c)
[<c021d1d8>] (sch_direct_xmit+0x94/0x18c) from [<c02087f8>] (dev_queue_xmit+0x238/0x42c)
[<c02087f8>] (dev_queue_xmit+0x238/0x42c) from [<c027ba74>] (packet_sendmsg+0xbe8/0xd28)
[<c027ba74>] (packet_sendmsg+0xbe8/0xd28) from [<c01f2870>] (sock_sendmsg+0x84/0xa8)
[<c01f2870>] (sock_sendmsg+0x84/0xa8) from [<c01f4628>] (SyS_sendto+0xb8/0xdc)
[<c01f4628>] (SyS_sendto+0xb8/0xdc) from [<c0013840>] (ret_fast_syscall+0x0/0x2c)
Code: e3130002 1a000001 e3130001 0affffcd (e7f001f2)
---[ end trace 81104fe70e8da7fe ]---
Kernel panic - not syncing: Fatal exception in interrupt

This is because the macro operations in smc91x.h defined
for Versatile are missing SMC_outsw() as used in this
commit.

The Versatile needs and uses the same accessors as the other
platforms in the first if(...) clause, just switch it to using
that and we have one problem less to worry about.

Checkpatch complains about spacing, but I have opted to
follow the style of this .h-file.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using iperf to send packets(GSO mode is on), a bug is triggered:

[  212.672781] kernel BUG at lib/dynamic_queue_limits.c:26!
[  212.673396] invalid opcode: 0000 [#1] SMP
[  212.673882] Modules linked in: 8139cp(O) nls_utf8 edd fuse loop dm_mod ipv6 i2c_piix4 8139too i2c_core intel_agp joydev pcspkr hid_generic intel_gtt floppy sr_mod mii button sg cdrom ext3 jbd mbcache usbhid hid uhci_hcd ehci_hcd usbcore sd_mod usb_common crc_t10dif crct10dif_common processor thermal_sys hwmon scsi_dh_emc scsi_dh_rdac scsi_dh_hp_sw scsi_dh ata_generic ata_piix libata scsi_mod [last unloaded: 8139cp]
[  212.676084] CPU: 0 PID: 4124 Comm: iperf Tainted: G           O 3.12.0-0.7-default+ #16
[  212.676084] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[  212.676084] task: ffff8800d83966c0 ti: ffff8800db4c8000 task.ti: ffff8800db4c8000
[  212.676084] RIP: 0010:[<ffffffff8122e23f>]  [<ffffffff8122e23f>] dql_completed+0x17f/0x190
[  212.676084] RSP: 0018:ffff880116e03e30  EFLAGS: 00010083
[  212.676084] RAX: 00000000000005ea RBX: 0000000000000f7c RCX: 0000000000000002
[  212.676084] RDX: ffff880111dd0dc0 RSI: 0000000000000bd4 RDI: ffff8800db6ffcc0
[  212.676084] RBP: ffff880116e03e48 R08: 0000000000000992 R09: 0000000000000000
[  212.676084] R10: ffffffff8181e400 R11: 0000000000000004 R12: 000000000000000f
[  212.676084] R13: ffff8800d94ec840 R14: ffff8800db440c80 R15: 000000000000000e
[  212.676084] FS:  00007f6685a3c700(0000) GS:ffff880116e00000(0000) knlGS:0000000000000000
[  212.676084] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  212.676084] CR2: 00007f6685ad6460 CR3: 00000000db714000 CR4: 00000000000006f0
[  212.676084] Stack:
[  212.676084]  ffff8800db6ffc00 000000000000000f ffff8800d94ec840 ffff880116e03eb8
[  212.676084]  ffffffffa041509f ffff880116e03e88 0000000f16e03e88 ffff8800d94ec000
[  212.676084]  00000bd400059858 000000050000000f ffffffff81094c36 ffff880116e03eb8
[  212.676084] Call Trace:
[  212.676084]  <IRQ>
[  212.676084]  [<ffffffffa041509f>] cp_interrupt+0x4ef/0x590 [8139cp]
[  212.676084]  [<ffffffff81094c36>] ? ktime_get+0x56/0xd0
[  212.676084]  [<ffffffff8108cf73>] handle_irq_event_percpu+0x53/0x170
[  212.676084]  [<ffffffff8108d0cc>] handle_irq_event+0x3c/0x60
[  212.676084]  [<ffffffff8108fdb5>] handle_fasteoi_irq+0x55/0xf0
[  212.676084]  [<ffffffff810045df>] handle_irq+0x1f/0x30
[  212.676084]  [<ffffffff81003c8b>] do_IRQ+0x5b/0xe0
[  212.676084]  [<ffffffff8142beaa>] common_interrupt+0x6a/0x6a
[  212.676084]  <EOI>
[  212.676084]  [<ffffffffa0416a21>] ? cp_start_xmit+0x621/0x97c [8139cp]
[  212.676084]  [<ffffffffa0416a09>] ? cp_start_xmit+0x609/0x97c [8139cp]
[  212.676084]  [<ffffffff81378ed9>] dev_hard_start_xmit+0x2c9/0x550
[  212.676084]  [<ffffffff813960a9>] sch_direct_xmit+0x179/0x1d0
[  212.676084]  [<ffffffff813793f3>] dev_queue_xmit+0x293/0x440
[  212.676084]  [<ffffffff813b0e46>] ip_finish_output+0x236/0x450
[  212.676084]  [<ffffffff810e59e7>] ? __alloc_pages_nodemask+0x187/0xb10
[  212.676084]  [<ffffffff813b10e8>] ip_output+0x88/0x90
[  212.676084]  [<ffffffff813afa64>] ip_local_out+0x24/0x30
[  212.676084]  [<ffffffff813aff0d>] ip_queue_xmit+0x14d/0x3e0
[  212.676084]  [<ffffffff813c6fd1>] tcp_transmit_skb+0x501/0x840
[  212.676084]  [<ffffffff813c8323>] tcp_write_xmit+0x1e3/0xb20
[  212.676084]  [<ffffffff81363237>] ? skb_page_frag_refill+0x87/0xd0
[  212.676084]  [<ffffffff813c8c8b>] tcp_push_one+0x2b/0x40
[  212.676084]  [<ffffffff813bb7e6>] tcp_sendmsg+0x926/0xc90
[  212.676084]  [<ffffffff813e1d21>] inet_sendmsg+0x61/0xc0
[  212.676084]  [<ffffffff8135e861>] sock_aio_write+0x101/0x120
[  212.676084]  [<ffffffff81107cf1>] ? vma_adjust+0x2e1/0x5d0
[  212.676084]  [<ffffffff812163e0>] ? timerqueue_add+0x60/0xb0
[  212.676084]  [<ffffffff81130b60>] do_sync_write+0x60/0x90
[  212.676084]  [<ffffffff81130d44>] ? rw_verify_area+0x54/0xf0
[  212.676084]  [<ffffffff81130f66>] vfs_write+0x186/0x190
[  212.676084]  [<ffffffff811317fd>] SyS_write+0x5d/0xa0
[  212.676084]  [<ffffffff814321e2>] system_call_fastpath+0x16/0x1b
[  212.676084] Code: ca 41 89 dc 41 29 cc 45 31 db 29 c2 41 89 c5 89 d0 45 29 c5 f7 d0 c1 e8 1f e9 43 ff ff ff 66 0f 1f 44 00 00 31 c0 e9 7b ff ff ff <0f> 0b eb fe 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 c7 47 40 00
[  212.676084] RIP  [<ffffffff8122e23f>] dql_completed+0x17f/0x190
------------[ cut here ]------------

When a skb has frags, bytes_compl plus skb->len nr_frags times in cp_tx().
It's not the correct value(actually, it should plus skb->len once) and it
will trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed).
So only increase bytes_compl when finish sending all frags. pkts_compl also
has a wrong value, fix it too.

It's introduced by commit 871f0d4c ("8139cp: enable bql").
Suggested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Windows driver will enable ALDPS function, but linux driver and firmware
do not have any configuration related to ALDPS function for 8168g.
So restart system to linux and remove the NIC cable, LAN enter ALDPS,
then LAN RX will be disabled.

This issue can be easily reproduced on dual boot windows and linux
system with RTL_GIGA_MAC_VER_40 chip.

Realtek said, ALDPS function can be disabled by configuring to PHY,
switch to page 0x0A43, reg0x10 bit2=0.
Signed-off-by: NDavid Chang <dchang@suse.com>
Acked-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The recent be2net commit 6384a4d0 (adds a support for busy polling)
introduces a regression that results in kernel crash. It incorrectly
modified be_close() so napi_disable() is called only for the first queue.
This breaks a correct pairing of napi_enable/_disable for the rest
of event queues and causes a crash in subsequent be_open() call.

v2: Applied suggestions from Sathya

Fixes: 6384a4d0 ("be2net: add support for ndo_busy_poll")
Cc: Sathya Perla <sathya.perla@emulex.com>
Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com>
Cc: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Acked-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 55485e7b.

I applied the wrong version of this patch, the right one is coming up
next.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The recent be2net commit 6384a4d0 (adds a support for busy polling)
introduces a regression that results in kernel crash. It incorrectly
modified be_close() so napi_disable() is called only for the first queue.
This breaks a correct pairing of napi_enable/_disable for the rest
of event queues and causes a crash in subsequent be_open() call.

Cc: Sathya Perla <sathya.perla@emulex.com>
Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com>
Cc: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Acked-by: NAjit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

2fdac010 ("via-velocity.c: update napi
implementation") overlooked an irq disabling spinlock when the Rx part
of the NAPI poll handler was converted from netif_rx to netif_receive_skb.

NAPI Rx processing can be taken out of the locked section with a pair of
napi_{disable / enable} since it only races with the MTU change function.

An heavier rework of the NAPI locking would be able to perform NAPI Tx
before Rx where I simply removed one of velocity_tx_srv calls.

References: https://bugzilla.redhat.com/show_bug.cgi?id=1022733
Fixes: 2fdac010 (via-velocity.c: update napi implementation)
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Tested-by: NAlex A. Schmidt <aaschmidt1@gmail.com>
Cc: Jamie Heilman <jamie@audible.transient.net>
Cc: Michele Baldessari <michele@acksyn.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use new hwmon API to simplify code, provide missing mandatory 'name'
sysfs attribute, and attach hwmon attributes to hwmon device instead
of pci device.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NNithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On BE3-R, the PF programs the initial MAC address for its VFs. Doing it again
in VF probe, causes a FW error which although harmless generates
an unnecessary error log message.
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NAjit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is not being set currently. (This field is not applicable for Lancer)
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NAjit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Interrupts need to be enabled in be_resume, when adapter boots back up from D3cold.

disabling interrupts in be_suspend() just to be symmetric to be_resume().
Signed-off-by: NRavikumar Nelavelli <ravikumar.nelavelli@emulex.com>
Signed-off-by: NAjit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Secondary unicast MAC addresses will get deleted only when the interface is UP.
When the interface is DOWN, though these secondary MAC addresses are unusable
and awaiting to be deleted, cause the firmware to believe that they are being used.
If the user intends to set a MAC address as primary MAC from one of these
secondary MAC addresses, the firmware returns a MAC address Collision error.
Delete these secondary MAC addresses during be_close.

The secondary MAC addresses list will be refreshed during interface open anyway.
Signed-off-by: NAjit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver currently requests the firmware to enable rx_interface options
without considering if the interface was created with that capability.
This could cause commands to firmware to fail.

To avoid this, enable only those options on an interface if the interface
was created with that capability.
Signed-off-by: NAjit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current driver release rtnl lock in between DCB re-configuration.
As a result, other flows (e.g., mtu config) may enter in between and fail
due to halted tx path for dcb configuration.
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During VF load, prior to sending messages on HW channel to PF the VF
checks its bulletin board to see whether the PF indicated it has closed;
If a closed PF is encountered, the VF skips sending the message.

Due to incorrect return values, there's a possible scenario in which the VF
finishes loading "successfully", while the PF hasn't actually fully configured
FW/HW for the VFs supposed configuration.
Once VF tries to send Tx packets, HW will raise an attention (and FW possibly
will start treat the VF as malicious).

The patch fails the loading process in such a scenario.
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If chip enters a recovery flow just after the driver issues a DMAE request
the DMAE will timeout. Current code will cause a bnx2x_panic() as a result,
which means interface will no longer be usable (regardless of the recovery
results), as bnx2x_panic() is irreversible for the driver.

As this is a possible flow, the panic should be reached only when driver
is compiled with STOP_ON_ERROR.
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While unloading, bnx2x needs to clean the sp_rtnl_state to prevent
configuration made before the unload to be applied afterwards with
stale values.
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During resume, use for_each_slave to walk the slaves of the cpsw, and
soft-reset each of them. This prevents oopses if there is only one
slave configured.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Acked-by: NMugunthan V N <mugunthanvnm@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For archs with pages size of 4K, when the chunk is freed, fwp is not in the
list so avoid attempting to delete it.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes bug 62491 (https://bugzilla.kernel.org/show_bug.cgi?id=62491).
After resuming some users got the following error flooding the kernel log:
alx 0000:02:00.0: invalid PHY speed/duplex: 0xffff
Signed-off-by: NJonas Hahnfeld <linux@hahnjo.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver fails to check the results of DMA mapping and results in
the following warning: (with kernel config "CONFIG_DMA_API_DEBUG" enable)

------------[ cut here ]------------
WARNING: at lib/dma-debug.c:937 check_unmap+0x43c/0x7d8()
fec 2188000.ethernet: DMA-API: device driver failed to check map
error[device address=0x00000000383a8040] [size=2048 bytes] [mapped as single]

Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.17-16827-g9cdb0ba-dirty #188
[<80013c4c>] (unwind_backtrace+0x0/0xf8) from [<80011704>] (show_stack+0x10/0x14)
[<80011704>] (show_stack+0x10/0x14) from [<80025614>] (warn_slowpath_common+0x4c/0x6c)
[<80025614>] (warn_slowpath_common+0x4c/0x6c) from [<800256c8>] (warn_slowpath_fmt+0x30/0x40)
[<800256c8>] (warn_slowpath_fmt+0x30/0x40) from [<8026bfdc>] (check_unmap+0x43c/0x7d8)
[<8026bfdc>] (check_unmap+0x43c/0x7d8) from [<8026c584>] (debug_dma_unmap_page+0x6c/0x78)
[<8026c584>] (debug_dma_unmap_page+0x6c/0x78) from [<8038049c>] (fec_enet_rx_napi+0x254/0x8a8)
[<8038049c>] (fec_enet_rx_napi+0x254/0x8a8) from [<804dc8c0>] (net_rx_action+0x94/0x160)
[<804dc8c0>] (net_rx_action+0x94/0x160) from [<8002c758>] (__do_softirq+0xe8/0x1d0)
[<8002c758>] (__do_softirq+0xe8/0x1d0) from [<8002c8e8>] (do_softirq+0x4c/0x58)
[<8002c8e8>] (do_softirq+0x4c/0x58) from [<8002cb50>] (irq_exit+0x90/0xc8)
[<8002cb50>] (irq_exit+0x90/0xc8) from [<8000ea88>] (handle_IRQ+0x3c/0x94)
[<8000ea88>] (handle_IRQ+0x3c/0x94) from [<8000855c>] (gic_handle_irq+0x28/0x5c)
[<8000855c>] (gic_handle_irq+0x28/0x5c) from [<8000de00>] (__irq_svc+0x40/0x50)
Exception stack(0x815a5f38 to 0x815a5f80)
5f20:                                                       815a5f80 3b9aca00
5f40: 0fe52383 00000002 0dd8950e 00000002 81e7b080 00000000 00000000 815ac4d8
5f60: 806032ec 00000000 00000017 815a5f80 80059028 8041fc4c 60000013 ffffffff
[<8000de00>] (__irq_svc+0x40/0x50) from [<8041fc4c>] (cpuidle_enter_state+0x50/0xf0)
[<8041fc4c>] (cpuidle_enter_state+0x50/0xf0) from [<8041fd94>] (cpuidle_idle_call+0xa8/0x14c)
[<8041fd94>] (cpuidle_idle_call+0xa8/0x14c) from [<8000edac>] (arch_cpu_idle+0x10/0x4c)
[<8000edac>] (arch_cpu_idle+0x10/0x4c) from [<800582f8>] (cpu_startup_entry+0x60/0x130)
[<800582f8>] (cpu_startup_entry+0x60/0x130) from [<80bc7a48>] (start_kernel+0x2d0/0x328)
[<80bc7a48>] (start_kernel+0x2d0/0x328) from [<10008074>] (0x10008074)
---[ end trace c6edec32436e0042 ]---

Because dma-debug add new interfaces to debug dma mapping errors, pls refer
to: http://lwn.net/Articles/516640/

After dma mapping, it must call dma_mapping_error() to check mapping error,
otherwise the map_err_type alway is MAP_ERR_NOT_CHECKED, check_unmap() define
the mapping is not checked and dump the error msg. So,add dma_mapping_error()
checking to fix the WARNING

And RX DMA buffers are used repeatedly and the driver copies it into an skb,
fec_enet_rx() should not map or unmap, use dma_sync_single_for_cpu()/dma_sync_single_for_device()
instead of dma_map_single()/dma_unmap_single().

There have another potential issue:  fec_enet_rx() passes the DMA address to __va().
Physical and DMA addresses are *not* the same thing. They may differ if the device
is behind an IOMMU or bounce buffering was required, or just because there is a fixed
offset between the device and host physical addresses. Also fix it in this patch.

=============================================
V2: add net_ratelimit() to limit map err message.
    use dma_sync_single_for_cpu() instead of dma_map_single().
    fix the issue that pass DMA addresses to __va() to get virture address.
V1: initial send
=============================================
Signed-off-by: NFugang Duan <B38611@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

hwtstamp_ioctl() should validate all fields of hwtstamp_config
before making any changes.  Currently it sets the TX configuration
before validating the rx_filter field.

Untested as I don't have a cross-compiler to hand.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cpsw_hwtstamp_ioctl() should validate all fields of hwtstamp_config,
and the hardware version, before making any changes.  Currently it
sets the TX configuration before validating the rx_filter field
or that the hardware supports timestamping.

Also correct the error code for hardware versions that don't
support timestamping.  ENOTSUPP is used by the NFS implementation
and is not part of userland API; we want EOPNOTSUPP (which glibc
also calls ENOTSUP, with one 'P').

Untested as I don't have a cross-compiler to hand.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Acked-by: NMugunthan V N <mugunthanvnm@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

stmmac_hwtstamp_ioctl() should validate all fields of hwtstamp_config
before making any changes.  Currently it sets the TX configuration
before validating the rx_filter field.

Compile-tested only.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

hwtstamp_ioctl() should validate all fields of hwtstamp_config
before making any changes.  Currently it sets the TX configuration
before validating the rx_filter field.

Compile-tested only.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

e1000e_hwtstamp_ioctl() should validate all fields of hwtstamp_config
before making any changes.  Currently it copies the configuration to
the e1000_adapter structure before validating it at all.

Change e1000e_config_hwtstamp() to take a pointer to the
hwstamp_config and to copy the config after validating it.

Compile-tested only.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tg3_hwtstamp_ioctl() should validate all fields of hwtstamp_config
before making any changes.  Currently it sets the TX configuration
before validating the rx_filter field.

Compile-tested only.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Acked-by: NNithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We assume that "mp->phy" can be NULL a couple lines before the
dereference.

Fixes: 1cce16d3 ('net: mv643xx_eth: Add missing phy_addr_set in DT mode')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add two trivial helpers list_next_entry() and list_prev_entry(), they
can have a lot of users including list.h itself.  In fact the 1st one is
already defined in events/core.c and bnx2x_sp.c, so the patch simply
moves the definition to list.h.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add missing platform_set_drvdata() in xtsonic_probe(), otherwise
calling platform_get_drvdata() in xtsonic_device_remove() may
returns NULL.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing platform_set_drvdata() in mace_probe(), otherwise
calling platform_get_drvdata() in mac_mace_device_remove() may
returns NULL.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing platform_set_drvdata() in arc_emac_probe(), otherwise
calling platform_get_drvdata() in arc_emac_remove() may returns NULL.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The max_vfs parameter has a limit of 63 and silently fails (adding 0 vfs) when
it is out of range. This patch adds a warning so that the user knows something
went wrong. Also, this patch moves the warning in ixgbe_enable_sriov() to where
max_vfs is checked, so that even an out of range value will show the deprecated
warning. Previously, an out of range parameter didn't even warn the user to use
the new sysfs interface instead.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes multiple problems in the link modes display in ethtool.
Newer parts have more complicated methods to determine actual link
capabilities.  Older parts cannot communicate with their SFP modules.
Finally, all the available defines are not displayed by ethtool.  This
updates the link modes to be as accurate as possible depending on what data
is available to the driver at any given time.
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Connect-IB adapter has an inherent page size which equals 4K.
Define an new enum that equals the page shift and use it instead of
using the value 12 throughout the code.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Change optimal_reclaimed_pages() to increase the output size of each
reclaim pages command. This change reduces significantly the amount of
reclaim pages commands issued to FW when the driver is unloaded which
reduces the overall driver unload time.
Signed-off-by: NMoshe Lazer <moshel@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Firmware spec requires reserved fields to be cleared when calling
set_hca_cap.  Current code queries and copy to the set area, possibly
resulting in reserved bits not cleared. This patch copies only
writable fields to the set area.

Fix also typo - msx => max
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Connect-IB firmware requires 4K pages to be communicated with the
driver. This patch breaks larger pages to 4K units to enable support
for architectures utilizing larger page size, such as PowerPC.  This
patch also fixes several places that referred to PAGE_SHIFT instead of
explicit 12 which is the inherent page shift on Connect-IB.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>