Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 21 6月, 2013 1 次提交
  3. 15 6月, 2013 1 次提交
    • D
      smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu(). · f21afc25
      由 David Daney 提交于 
      Thanks to commit f91eb62f ("init: scream bloody murder if interrupts
are enabled too early"), "bloody murder" is now being screamed.

With a MIPS OCTEON config, we use on_each_cpu() in our
irq_chip.irq_bus_sync_unlock() function.  This gets called in early as a
result of the time_init() call.  Because the !SMP version of
on_each_cpu() unconditionally enables irqs, we get:

    WARNING: at init/main.c:560 start_kernel+0x250/0x410()
    Interrupts were enabled early
    CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0-rc5-Cavium-Octeon+ #801
    Call Trace:
      show_stack+0x68/0x80
      warn_slowpath_common+0x78/0xb0
      warn_slowpath_fmt+0x38/0x48
      start_kernel+0x250/0x410

Suggested fix: Do what we already do in the SMP version of
on_each_cpu(), and use local_irq_save/local_irq_restore.  Because we
need a flags variable, make it a static inline to avoid name space
issues.

[ Change from v1: Convert on_each_cpu to a static inline function, add
  #include <linux/irqflags.h> to avoid build breakage on some files.

  on_each_cpu_mask() and on_each_cpu_cond() suffer the same problem as
  on_each_cpu(), but they are not causing !SMP bugs for me, so I will
  defer changing them to a less urgent patch. ]
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f21afc25
  5. 13 6月, 2013 5 次提交
  7. 12 6月, 2013 2 次提交
  9. 11 6月, 2013 3 次提交
  11. 07 6月, 2013 2 次提交
  13. 06 6月, 2013 1 次提交
    • P
      arch, mm: Remove tlb_fast_mode() · 29eb7782
      由 Peter Zijlstra 提交于 
      Since the introduction of preemptible mmu_gather TLB fast mode has been
broken. TLB fast mode relies on there being absolutely no concurrency;
it frees pages first and invalidates TLBs later.

However now we can get concurrency and stuff goes *bang*.

This patch removes all tlb_fast_mode() code; it was found the better
option vs trying to patch the hole by entangling tlb invalidation with
the scheduler.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Reported-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      29eb7782
  15. 05 6月, 2013 1 次提交
  17. 03 6月, 2013 2 次提交
  19. 01 6月, 2013 3 次提交
  21. 31 5月, 2013 2 次提交
  23. 30 5月, 2013 2 次提交
    • R
      scatterlist: sg_set_buf() argument must be in linear mapping · ac4e97ab
      由 Rusty Russell 提交于 
      Add a check behind CONFIG_DEBUG_SG to verify this.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      ac4e97ab
    • N
      target: Re-instate sess_wait_list for target_wait_for_sess_cmds · 9b31a328
      由 Nicholas Bellinger 提交于 
      Switch back to pre commit 1c7b13fe list splicing logic for active I/O
shutdown with tcm_qla2xxx + ib_srpt fabrics.

The original commit was done under the incorrect assumption that it's safe to
walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after
sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting()
during session shutdown.

So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list
during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to
allow wait_for_completion() + TFO->release_cmd() to occur without having to
walk ->sess_cmd_list after the list_splice.

Also add a check to exit if target_sess_cmd_list_set_waiting() has already
been called, and add a WARN_ON to check for any fabric bug where new se_cmds
are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already
been set.

Cc: Joern Engel <joern@logfs.org>
Cc: Roland Dreier <roland@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
      9b31a328
  25. 29 5月, 2013 2 次提交
  27. 25 5月, 2013 4 次提交
    • R
      linux/kernel.h: fix kernel-doc warning · 7450231f
      由 Randy Dunlap 提交于 
      Fix kernel-doc warning in <linux/kernel.h>:

  Warning(include/linux/kernel.h:590): No description found for parameter 'ip'

scripts/kernel-doc cannot handle macros, functions, or function
prototypes between the function or macro that is being documented and
its definition, so move these prototypes above the function that is
being documented.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7450231f
    • I
      wait: fix false timeouts when using wait_event_timeout() · 4c663cfc
      由 Imre Deak 提交于 
      Many callers of the wait_event_timeout() and
wait_event_interruptible_timeout() expect that the return value will be
positive if the specified condition becomes true before the timeout
elapses.  However, at the moment this isn't guaranteed.  If the wake-up
handler is delayed enough, the time remaining until timeout will be
calculated as 0 - and passed back as a return value - even if the
condition became true before the timeout has passed.

Fix this by returning at least 1 if the condition becomes true.  This
semantic is in line with what wait_for_condition_timeout() does; see
commit bb10ed09 ("sched: fix wait_for_completion_timeout() spurious
failure under heavy load").

Daniel said "We have 3 instances of this bug in drm/i915.  One case even
where we switch between the interruptible and not interruptible
wait_event_timeout variants, foolishly presuming they have the same
semantics.  I very much like this."

One such bug is reported at
  https://bugs.freedesktop.org/show_bug.cgi?id=64133Signed-off-by: NImre Deak <imre.deak@intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NJens Axboe <axboe@kernel.dk>
Cc: "Paul E.  McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Lukas Czerner <lczerner@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4c663cfc
    • A
      rapidio: add enumeration/discovery start from user space · bc8fcfea
      由 Alexandre Bounine 提交于 
      Add RapidIO enumeration/discovery start from user space.  User space
start allows to defer RapidIO fabric scan until the moment when all
participating endpoints are initialized avoiding mandatory synchronized
start of all endpoints (which may be challenging in systems with large
number of RapidIO endpoints).
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@Prodrive.nl>
Cc: Micha Nelissen <micha.nelissen@Prodrive.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bc8fcfea
    • A
      rapidio: make enumeration/discovery configurable · a11650e1
      由 Alexandre Bounine 提交于 
      Systems that use RapidIO fabric may need to implement their own
enumeration and discovery methods which are better suitable for needs of
a target application.

The following set of patches is intended to simplify process of
introduction of new RapidIO fabric enumeration/discovery methods.

The first patch offers ability to add new RapidIO enumeration/discovery
methods using kernel configuration options.  This new configuration
option mechanism allows to select statically linked or modular
enumeration/discovery method(s) from the list of existing methods or use
external module(s).

This patch also updates the currently existing enumeration/discovery
code to be used as a statically linked or modular method.

The corresponding configuration option is named "Basic
enumeration/discovery" method.  This is the only one configuration
option available today but new methods are expected to be introduced
after adoption of provided patches.

The second patch address a long time complaint of RapidIO subsystem
users regarding fabric enumeration/discovery start sequence.  Existing
implementation offers only a boot-time enumeration/discovery start which
requires synchronized boot of all endpoints in RapidIO network.  While
it works for small closed configurations with limited number of
endpoints, using this approach in systems with large number of endpoints
is quite challenging.

To eliminate requirement for synchronized start the second patch
introduces RapidIO enumeration/discovery start from user space.

For compatibility with the existing RapidIO subsystem implementation,
automatic boot time enumeration/discovery start can be configured in by
specifying "rio-scan.scan=1" command line parameter if statically linked
basic enumeration method is selected.

This patch:

Rework to implement RapidIO enumeration/discovery method selection
combined with ability to use enumeration/discovery as a kernel module.

This patch adds ability to introduce new RapidIO enumeration/discovery
methods using kernel configuration options.  Configuration option
mechanism allows to select statically linked or modular
enumeration/discovery method from the list of existing methods or use
external modules.  If a modular enumeration/discovery is selected each
RapidIO mport device can have its own method attached to it.

The existing enumeration/discovery code was updated to be used as
statically linked or modular method.  This configuration option is named
"Basic enumeration/discovery" method.

Several common routines have been moved from rio-scan.c to make them
available to other enumeration methods and reduce number of exported
symbols.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@Prodrive.nl>
Cc: Micha Nelissen <micha.nelissen@Prodrive.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a11650e1
  29. 24 5月, 2013 1 次提交
    • T
      cgroup: fix a subtle bug in descendant pre-order walk · 7805d000
      由 Tejun Heo 提交于 
      When cgroup_next_descendant_pre() initiates a walk, it checks whether
the subtree root doesn't have any children and if not returns NULL.
Later code assumes that the subtree isn't empty.  This is broken
because the subtree may become empty inbetween, which can lead to the
traversal escaping the subtree by walking to the sibling of the
subtree root.

There's no reason to have the early exit path.  Remove it along with
the later assumption that the subtree isn't empty.  This simplifies
the code a bit and fixes the subtle bug.

While at it, fix the comment of cgroup_for_each_descendant_pre() which
was incorrectly referring to ->css_offline() instead of
->css_online().
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org
      7805d000
  31. 23 5月, 2013 2 次提交
    • F
      netfilter: add nf_ipv6_ops hook to fix xt_addrtype with IPv6 · 2a7851bf
      由 Florian Westphal 提交于 
      Quoting https://bugzilla.netfilter.org/show_bug.cgi?id=812:

[ ip6tables -m addrtype ]
When I tried to use in the nat/PREROUTING it messes up the
routing cache even if the rule didn't matched at all.
[..]
If I remove the --limit-iface-in from the non-working scenario, so just
use the -m addrtype --dst-type LOCAL it works!

This happens when LOCAL type matching is requested with --limit-iface-in,
and the default ipv6 route is via the interface the packet we test
arrived on.

Because xt_addrtype uses ip6_route_output, the ipv6 routing implementation
creates an unwanted cached entry, and the packet won't make it to the
real/expected destination.

Silently ignoring --limit-iface-in makes the routing work but it breaks
rule matching (--dst-type LOCAL with limit-iface-in is supposed to only
match if the dst address is configured on the incoming interface;
without --limit-iface-in it will match if the address is reachable
via lo).

The test should call ipv6_chk_addr() instead.  However, this would add
a link-time dependency on ipv6.

There are two possible solutions:

1) Revert the commit that moved ipt_addrtype to xt_addrtype,
   and put ipv6 specific code into ip6t_addrtype.
2) add new "nf_ipv6_ops" struct to register pointers to ipv6 functions.

While the former might seem preferable, Pablo pointed out that there
are more xt modules with link-time dependeny issues regarding ipv6,
so lets go for 2).
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
      2a7851bf
    • T
      OMAPDSS: Fix crash with DT boot · 591a0ac7
      由 Tomi Valkeinen 提交于 
      When booting with DT, there's a crash when omapfb is probed. This is
caused by the fact that omapdss+DT is not yet supported, and thus
omapdss is not probed at all. On the other hand, omapfb is always
probed. When omapfb tries to use omapdss, there's a NULL pointer
dereference crash. The same error should most likely happen with omapdrm
and omap_vout also.

To fix this, add an "initialized" state to omapdss. When omapdss has
been probed, it's marked as initialized. omapfb, omapdrm and omap_vout
check this state when they are probed to see that omapdss is actually
there.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
      591a0ac7
  33. 22 5月, 2013 3 次提交
    • M
      kernel: Fix s390 absolute memory access for /dev/mem · 576ebd74
      由 Michael Holzheu 提交于 
      On s390 the prefix page and absolute zero pages are not correctly
returned when reading /dev/mem. The reason is that the s390 asm/io.h
file includes the asm-generic/io.h file which then defines
xlate_dev_mem_ptr() and therefore overwrites the s390 specific
version that does the correct swap operation for prefix and absolute
zero pages. The problem is a regression that was introduced with git
commit cd248341 (s390/pci: base support).

To fix the problem add "#ifndef xlate_dev_mem_ptr" in asm-generic/io.h
and "#define xlate_dev_mem_ptr" in asm/io.h. This ensures that the
s390 version is used. For completeness also add the "#ifndef"
construct for xlate_dev_kmem_ptr().
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      576ebd74
    • R
      Add include dependencies to <linux/printk.h>. · 154c2670
      由 Ralf Baechle 提交于 
      If <linux/linkage.h> has not been included before <linux/printk.h>,
a build error like the below one will result:

  CC      arch/mips/kernel/idle.o
In file included from arch/mips/kernel/idle.c:17:0:
include/linux/printk.h:109:1: error: data definition has no type or storage class [-Werror]
include/linux/printk.h:109:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int]
include/linux/printk.h:110:1: error: ‘format’ attribute only applies to function types [-Werror=attributes]
include/linux/printk.h:110:1: error: expected ‘,’ or ‘;’ before ‘int’
include/linux/printk.h:114:1: error: data definition has no type or storage class [-Werror]
include/linux/printk.h:114:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int]
include/linux/printk.h:115:1: error: ‘format’ attribute only applies to function types [-Werror=attributes]
include/linux/printk.h:115:1: error: expected ‘,’ or ‘;’ before ‘int’
include/linux/printk.h:117:1: error: data definition has no type or storage class [-Werror]
include/linux/printk.h:117:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int]
include/linux/printk.h:118:1: error: ‘format’ attribute only applies to function types [-Werror=attributes]
include/linux/printk.h:118:1: error: ‘__cold__’ attribute ignored [-Werror=attributes]
include/linux/printk.h:118:1: error: expected ‘,’ or ‘;’ before ‘asmlinkage’
include/linux/printk.h:122:1: error: data definition has no type or storage class [-Werror]
include/linux/printk.h:122:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int]
include/linux/printk.h:123:1: error: ‘format’ attribute only applies to function types [-Werror=attributes]
include/linux/printk.h:123:1: error: ‘__cold__’ attribute ignored [-Werror=attributes]
include/linux/printk.h:123:1: error: expected ‘,’ or ‘;’ before ‘int’
In file included from include/linux/kernel.h:14:0,
                 from include/linux/sched.h:15,
                 from arch/mips/kernel/idle.c:18:
include/linux/dynamic_debug.h: In function ‘ddebug_dyndbg_module_param_cb’:
include/linux/dynamic_debug.h:124:3: error: implicit declaration of function ‘printk’ [-Werror=implicit-function-declaration]

Fixed by including <linux/linkage.h>.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      154c2670
    • R
      ACPI / PM: Allow device power states to be used for CONFIG_PM unset · ec4602a9
      由 Rafael J. Wysocki 提交于 
      Currently, drivers/acpi/device_pm.c depends on CONFIG_PM and all of
the functions defined in there are replaced with static inline stubs
if that option is unset.  However, CONFIG_PM means, roughly, "runtime
PM or suspend/hibernation support" and some of those functions are
useful regardless of that.  For example, they are used by the ACPI
fan driver for controlling fans and acpi_device_set_power() is called
during device removal.  Moreover, device initialization may depend on
setting device power states properly.

For these reasons, make the routines manipulating ACPI device power
states defined in drivers/acpi/device_pm.c available for CONFIG_PM
unset too.
Reported-by: NZhang Rui <rui.zhang@intel.com>
Reported-and-tested-by: NMichel Lespinasse <walken@google.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
      ec4602a9
  35. 21 5月, 2013 3 次提交
    • J
      target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds · be646c2d
      由 Joern Engel 提交于 
      Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds
shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers.

Cc: Joern Engel <joern@logfs.org>
Cc: Roland Dreier <roland@kernel.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
      be646c2d
    • P
      tty/vt: Fix vc_deallocate() lock order · 421b40a6
      由 Peter Hurley 提交于 
      Now that the tty port owns the flip buffers and i/o is allowed
from the driver even when no tty is attached, the destruction
of the tty port (and the flip buffers) must ensure that no
outstanding work is pending.

Unfortunately, this creates a lock order problem with the
console_lock (see attached lockdep report [1] below).

For single console deallocation, drop the console_lock prior
to port destruction. When multiple console deallocation,
defer port destruction until the consoles have been
deallocated.

tty_port_destroy() is not required if the port has not
been used; remove from vc_allocate() failure path.

[1] lockdep report from Dave Jones <davej@redhat.com>

 ======================================================
 [ INFO: possible circular locking dependency detected ]
 3.9.0+ #16 Not tainted
 -------------------------------------------------------
 (agetty)/26163 is trying to acquire lock:
 blocked:  ((&buf->work)){+.+...}, instance: ffff88011c8b0020, at: [<ffffffff81062065>] flush_work+0x5/0x2e0

 but task is already holding lock:
 blocked:  (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [<ffffffff813bc201>] vt_ioctl+0xb61/0x1230

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (console_lock){+.+.+.}:
        [<ffffffff810b3f74>] lock_acquire+0xa4/0x210
        [<ffffffff810416c7>] console_lock+0x77/0x80
        [<ffffffff813c3dcd>] con_flush_chars+0x2d/0x50
        [<ffffffff813b32b2>] n_tty_receive_buf+0x122/0x14d0
        [<ffffffff813b7709>] flush_to_ldisc+0x119/0x170
        [<ffffffff81064381>] process_one_work+0x211/0x700
        [<ffffffff8106498b>] worker_thread+0x11b/0x3a0
        [<ffffffff8106ce5d>] kthread+0xed/0x100
        [<ffffffff81601cac>] ret_from_fork+0x7c/0xb0

 -> #0 ((&buf->work)){+.+...}:
        [<ffffffff810b349a>] __lock_acquire+0x193a/0x1c00
        [<ffffffff810b3f74>] lock_acquire+0xa4/0x210
        [<ffffffff810620ae>] flush_work+0x4e/0x2e0
        [<ffffffff81065305>] __cancel_work_timer+0x95/0x130
        [<ffffffff810653b0>] cancel_work_sync+0x10/0x20
        [<ffffffff813b8212>] tty_port_destroy+0x12/0x20
        [<ffffffff813c65e8>] vc_deallocate+0xf8/0x110
        [<ffffffff813bc20c>] vt_ioctl+0xb6c/0x1230
        [<ffffffff813b01a5>] tty_ioctl+0x285/0xd50
        [<ffffffff811ba825>] do_vfs_ioctl+0x305/0x530
        [<ffffffff811baad1>] sys_ioctl+0x81/0xa0
        [<ffffffff81601d59>] system_call_fastpath+0x16/0x1b

 other info that might help us debug this:

 [ 6760.076175]  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(console_lock);
                                lock((&buf->work));
                                lock(console_lock);
   lock((&buf->work));

  *** DEADLOCK ***

 1 lock on stack by (agetty)/26163:
  #0: blocked:  (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [<ffffffff813bc201>] vt_ioctl+0xb61/0x1230
 stack backtrace:
 Pid: 26163, comm: (agetty) Not tainted 3.9.0+ #16
 Call Trace:
  [<ffffffff815edb14>] print_circular_bug+0x200/0x20e
  [<ffffffff810b349a>] __lock_acquire+0x193a/0x1c00
  [<ffffffff8100a269>] ? sched_clock+0x9/0x10
  [<ffffffff8100a269>] ? sched_clock+0x9/0x10
  [<ffffffff8100a200>] ? native_sched_clock+0x20/0x80
  [<ffffffff810b3f74>] lock_acquire+0xa4/0x210
  [<ffffffff81062065>] ? flush_work+0x5/0x2e0
  [<ffffffff810620ae>] flush_work+0x4e/0x2e0
  [<ffffffff81062065>] ? flush_work+0x5/0x2e0
  [<ffffffff810b15db>] ? mark_held_locks+0xbb/0x140
  [<ffffffff8113c8a3>] ? __free_pages_ok.part.57+0x93/0xc0
  [<ffffffff810b15db>] ? mark_held_locks+0xbb/0x140
  [<ffffffff810652f2>] ? __cancel_work_timer+0x82/0x130
  [<ffffffff81065305>] __cancel_work_timer+0x95/0x130
  [<ffffffff810653b0>] cancel_work_sync+0x10/0x20
  [<ffffffff813b8212>] tty_port_destroy+0x12/0x20
  [<ffffffff813c65e8>] vc_deallocate+0xf8/0x110
  [<ffffffff813bc20c>] vt_ioctl+0xb6c/0x1230
  [<ffffffff810aec41>] ? lock_release_holdtime.part.30+0xa1/0x170
  [<ffffffff813b01a5>] tty_ioctl+0x285/0xd50
  [<ffffffff812b00f6>] ? inode_has_perm.isra.46.constprop.61+0x56/0x80
  [<ffffffff811ba825>] do_vfs_ioctl+0x305/0x530
  [<ffffffff812b04db>] ? selinux_file_ioctl+0x5b/0x110
  [<ffffffff811baad1>] sys_ioctl+0x81/0xa0
  [<ffffffff81601d59>] system_call_fastpath+0x16/0x1b

Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      421b40a6
    • A
      drm/radeon: add Hainan pci ids · 2a0f9055
      由 Alex Deucher 提交于 
      Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
      2a0f9055