- 18 3月, 2015 16 次提交
-
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 3月, 2015 4 次提交
-
-
由 Jiri Pirko 提交于
This would fix randconfig compile error: net/built-in.o: In function `netdev_switch_fib_ipv4_abort': (.text+0xf7811): undefined reference to `fib_flush_external' Also it fixes following warnings: warning: (NET_DSA) selects NET_SWITCHDEV which has unmet direct dependencies (NET && INET) warning: (NET_DSA_MV88E6060 && NET_DSA_MV88E6131 && NET_DSA_MV88E6123_61_65 && NET_DSA_MV88E6171 && NET_DSA_MV88E6352 && NET_DSA_BCM_SF2) selects NET_DSA which has unmet direct dependencies (NET && HAVE_NET_DSA && NET_SWITCHDEV) Reported-by: NRandy Dunlap <rdunlap@infradead.org> Suggested-by: NAlexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shaohui Xie 提交于
MDIO controller on little endian Socs, e.g. ls2085a is similar to the controller on big endian Socs, but the MDIO access is little endian, we use I/O accessor function to handle endianness, so the driver can run on little endian Socs. A property "little-endian" is used in DTS to indicate the MDIO is little endian, if driver probes the property, driver will access MDIO in little endian, otherwise, driver works in big endian by default. Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shaohui Xie 提交于
There is a bug in xgmac_wait_until_done() which mdio_stat should be used instead of mdio_data when checking if busy bit is cleared. Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Scott Feldman 提交于
In hast to fix some sparse warning, I hard-coded a fix-sized array on the stack which is probably too big for kernel standards. Fix this by converting array to dynamic allocation. Signed-off-by: NScott Feldman <sfeldma@gmail.com> Acked-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 3月, 2015 5 次提交
-
-
由 Scott Feldman 提交于
Move swdev wrappers over to new swdev ops (from previous ndo ops). No functional changes to the implementation. Signed-off-by: NScott Feldman <sfeldma@gmail.com> rocker: move to new swdev ops Signed-off-by: NScott Feldman <sfeldma@gmail.com> dsa: move to new swdev ops Signed-off-by: NScott Feldman <sfeldma@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petri Gynther 提交于
Add support for Hardware Filter Block (HFB) so that incoming Rx traffic can be matched and directed to desired Rx queues. Signed-off-by: NPetri Gynther <pgynther@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingchang Lu 提交于
Use of_property_read*() to get arch endian consistent property values. Do some refactoring in the process. Signed-off-by: NJingchang Lu <jingchang.lu@freescale.com> Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
Use conversion macros to correctly access the BE fields of the Rx and Tx Frame Control Block on LE CPUs. Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
Use conversion macros to correctly access the BE fields of the Rx and Tx Buffer Descriptors on LE CPUs. Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2015 4 次提交
-
-
由 Alexander Aring 提交于
These registers are also changed by transceiver and should be volatile for right accessing via regmap debugfs. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch adds a handling for calibration if we are 5 minutes in PLL state. I first tried to implement the calibration functionality in TX_ON state via register values CF_START and DCU_START, but this occurs a one second delay at each calibration time. An another solution to start a calibration is to switch from TRX_OFF state into TX_ON, then a calibration is done automatically by transceiver. This method will be used in this patch, after each transmit of a frame we check with jiffies if the PLL is set 5 minutes without doing a TRX_OFF->(TX_ON || RX_AACK_ON) or channel switch. The worst case would be a transceiver in receiving mode only, but this is under normal operation very unlikely. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Cc: Werner Almesberger <werner@almesberger.net> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch replace the state change timing relevant sleeps with hrtimers. Currently the sleeps are done in the complete handler of spi_async. The relation of doing the state change timing sleep with a timer will get the sleep functionality out of spi_async complete handler context. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch initialize xtal_trim value to zero. The xtal_trim property is an optional device tree value. Currently if no xtal_trim property is given the xtal_trim value can be contain random data, because it's a stack variable. This patch init the xtal_trim value to zero which is also the default value after reset for at86rf230 transceivers. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 14 3月, 2015 10 次提交
-
-
由 Jeff Kirsher 提交于
Use the macro to copy the Ethernet address instead of memcpy(). Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
-
由 Jeff Kirsher 提交于
Fix the code comments to align with drivers/net/ code commenting style, as well as whitespace issues. The whitespace issues resolve checkpatch errors, like lines exceeding 80 chars (except for strings) and the use of tabs where possible. CC: <kernel-team@fb.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
-
由 Alexander Duyck 提交于
This patch removes some dead code from the cleanup path for ixgbe. Setting and clearing the flag doesn't do anything since all we are doing is setting the flag, scheduling NAPI, clearing the flag and then letting netpoll do the polling cleanup. As such it doesn't make much sense to have it there. This patch also removes one minor white-space error. CC: <kernel-team@fb.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
This patch makes sure that relaxed ordering is not disabled when on SPARC, where it helps with performance. CC: <kernel-team@fb.com> CC: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reported-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
-
由 Don Skidmore 提交于
Correcting a mistake when I initial created this function. I should have made this static since it is only referenced where the function pointer is assigned. CC: <kernel-team@fb.com> Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
Missed this when I created commit 6a14ee0c ("ixgbe: Add X550 support function pointers"). Use a the __be* type to be consistent with how the value is assigned. CC: <kernel-team@fb.com> Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
For the X550 mac type we have to do additional steps around enabling/disabling Rx. This patch will add a layer of indirection around these support functions to enable this. CC: <kernel-team@fb.com> Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Florian Fainelli 提交于
Delay the update of the TDMA producer index unless this is the last SKB in a batch, or the queue is already stopped. Move the check for whether the queue should be stopped before the xmit_more check to avoid locking the transmit queue in case there was a SKB submitted which has xmit_more set. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
There is no need to have both bcmgenet_xmit_single() and bcmgenet_xmit_frag() perform a free_bds decrement and a prod_index increment by one. In case one of these functions fails to map a SKB or fragment for transmit, we will return and exit bcmgenet_xmit() with an error. We can therefore safely use our local copy of nr_frags to know by how much we should decrement the number of free buffers available, and by how much the producer count must be incremented and do this in the tail of bcmgenet_xmit(). Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NPetri Gynther <pgynther@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petri Gynther 提交于
Currently, bcmgenet_desc_rx() calls bcmgenet_rx_refill() at the end of Rx packet processing loop, after the current Rx packet has already been passed to napi_gro_receive(). However, bcmgenet_rx_refill() might fail to allocate a new Rx skb, thus leaving a hole on the Rx queue where no valid Rx buffer exists. To eliminate this situation: 1. Rewrite bcmgenet_rx_refill() to retain the current Rx skb on the Rx queue if a new replacement Rx skb can't be allocated and DMA-mapped. In this case, the data on the current Rx skb is effectively dropped. 2. Modify bcmgenet_desc_rx() to call bcmgenet_rx_refill() at the top of Rx packet processing loop, so that the new replacement Rx skb is already in place before the current Rx skb is processed. Signed-off-by: NPetri Gynther <pgynther@google.com> Tested-by: Jaedon Shin <jaedon.shin@gmail.com>-- Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Tested-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2015 1 次提交
-
-
由 Simon Horman 提交于
In the case of AF_INET s_addr was set to INADDR_ANY (0) which which both symmetric with the AF_INET6 case, where s_addr is not set, and unnecessary as udp_conf is zeroed out earlier in the same function. I suspect this change does not have any run-time effect due to compiler optimisations. But it does make the code a little easier on the/my eyes. Cc: Tom Herbert <therbert@google.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-