File descriptors are always closed on exit :-)
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was initially sent by Lorenzo Colitti, but was subsequently
lost in the final diff he submitted.
Signed-off-by: NLoganaden Velvindron <logan@elandsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The pernet ops aren't ever unregistered, which causes a memory
leak and an OOPs if the module is ever reinserted.

Fixes: 0b5e8b8e ("net: Add Geneve tunneling protocol driver")
CC: Andy Zhou <azhou@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Geneve does not currently set the inner protocol type when
transmitting packets. This causes GSO segmentation to fail on NICs
that do not support Geneve offloading.

CC: Andy Zhou <azhou@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Iyappan Subramanian says:

====================
drivers: net: xgene: Fix crash for backward compatibility

This patch set fixes the following issues that were reported during regression.

Patch 1,2 : Adds backward compatibility with the older firmware (<= 1.13.28).
Patch 3   : Use separate hardware resources (descriptor ring, prefetch buffer)
	   that are not shared with the firmware
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the following kernel crash during SGMII based 1GbE probe.

	BUG: Bad page state in process swapper/0  pfn:40fe6ad
	page:ffffffbee37a75d8 count:-1 mapcount:0 mapping:          (null) index:0x0
	flags: 0x0()
	page dumped because: nonzero _count
	Modules linked in:
	CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0+ #7
	Call trace:
	[<ffffffc000087fa0>] dump_backtrace+0x0/0x12c
	[<ffffffc0000880dc>] show_stack+0x10/0x1c
	[<ffffffc0004d981c>] dump_stack+0x74/0xc4
	[<ffffffc00012fe70>] bad_page+0xd8/0x128
	[<ffffffc000133000>] get_page_from_freelist+0x4b8/0x640
	[<ffffffc000133260>] __alloc_pages_nodemask+0xd8/0x834
	[<ffffffc0004194f8>] __netdev_alloc_frag+0x124/0x1b8
	[<ffffffc00041bfdc>] __netdev_alloc_skb+0x90/0x10c
	[<ffffffc00039ff30>] xgene_enet_refill_bufpool+0x11c/0x280
	[<ffffffc0003a11a4>] xgene_enet_process_ring+0x168/0x340
	[<ffffffc0003a1498>] xgene_enet_napi+0x1c/0x50
	[<ffffffc00042b454>] net_rx_action+0xc8/0x18c
	[<ffffffc0000b0880>] __do_softirq+0x114/0x24c
	[<ffffffc0000b0c34>] irq_exit+0x94/0xc8
	[<ffffffc0000e68a0>] __handle_domain_irq+0x8c/0xf4
	[<ffffffc000081288>] gic_handle_irq+0x30/0x7c

This was due to hardware resource sharing conflict with the firmware. This
patch fixes this crash by using resources (descriptor ring, prefetch buffer)
that are not shared.
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support when used with older firmware (<= 1.13.28).

- Added xgene_ring_mgr_init() to check whether ring manager is initialized
- Calling xgene_ring_mgr_init() from xgene_port_ops.reset()
- To handle errors, changed the return type of xgene_port_ops.reset()
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following kernel crash was reported when using older firmware (<= 1.13.28).

[    0.980000] libphy: APM X-Gene MDIO bus: probed
[    1.130000] Unhandled fault: synchronous external abort (0x96000010) at 0xffffff800009a17c
[    1.140000] Internal error: : 96000010 [#1] SMP
[    1.140000] Modules linked in:
[    1.140000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0+ #21
[    1.140000] task: ffffffc3f0110000 ti: ffffffc3f0064000 task.ti: ffffffc3f0064000
[    1.140000] PC is at ioread32+0x58/0x68
[    1.140000] LR is at xgene_enet_setup_ring+0x18c/0x1cc
[    1.140000] pc : [<ffffffc0003cec68>] lr : [<ffffffc00053dad8>] pstate: a0000045
[    1.140000] sp : ffffffc3f0067b20
[    1.140000] x29: ffffffc3f0067b20 x28: ffffffc000aa8ea0
[    1.140000] x27: ffffffc000bb2000 x26: ffffffc000a64270
[    1.140000] x25: ffffffc000b05ad8 x24: ffffffc0ff99ba58
[    1.140000] x23: 0000000000004000 x22: 0000000000004000
[    1.140000] x21: 0000000000000200 x20: 0000000000200000
[    1.140000] x19: ffffffc0ff99ba18 x18: ffffffc0007a6000
[    1.140000] x17: 0000000000000007 x16: 000000000000000e
[    1.140000] x15: 0000000000000001 x14: 0000000000000000
[    1.140000] x13: ffffffbeedb71320 x12: 00000000ffffff80
[    1.140000] x11: 0000000000000002 x10: 0000000000000000
[    1.140000] x9 : 0000000000000000 x8 : ffffffc3eb2a4000
[    1.140000] x7 : 0000000000000000 x6 : 0000000000000000
[    1.140000] x5 : 0000000001080000 x4 : 000000007d654010
[    1.140000] x3 : ffffffffffffffff x2 : 000000000003ffff
[    1.140000] x1 : ffffff800009a17c x0 : ffffff800009a17c

The issue was that the older firmware does not support 10GbE and
SGMII based 1GBE interfaces.

This patch changes the address length of the reg property of sgmii0 and xgmii
nodes and serves as preparatory patch for the fix.
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NKeyur Chudgar <kchudgar@apm.com>
Reported-by: NDann Frazier <dann.frazier@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

efx_ef10_probe() was BUGging out if the BAR2 size was 0.  This is
 unnecessarily violent; instead we should just fail to probe the device.
Kept a WARN_ON as this problem indicates a broken or misconfigured NIC.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
ipv6: Fix iflink setting for ipv6 tunnels

The ipv6 tunnels do the dev->iflink setting too early, it gets
overwritten by register_netdev(). So set dev->iflink from within
a ndo_init function to keep the configured setting.

This patchset fixes this for ip6_tunnel, vti6, sit and gre6.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise it gets overwritten by register_netdev().
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipip6_tunnel_init() sets the dev->iflink via a call to
ipip6_tunnel_bind_dev(). After that, register_netdevice()
sets dev->iflink = -1. So we loose the iflink configuration
for ipv6 tunnels. Fix this by using ipip6_tunnel_init() as the
ndo_init function. Then ipip6_tunnel_init() is called after
dev->iflink is set to -1 from register_netdevice().
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

vti6_dev_init() sets the dev->iflink via a call to
vti6_link_config(). After that, register_netdevice()
sets dev->iflink = -1. So we loose the iflink configuration
for vti6 tunnels. Fix this by using vti6_dev_init() as the
ndo_init function. Then vti6_dev_init() is called after
dev->iflink is set to -1 from register_netdevice().
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip6_tnl_dev_init() sets the dev->iflink via a call to
ip6_tnl_link_config(). After that, register_netdevice()
sets dev->iflink = -1. So we loose the iflink configuration
for ipv6 tunnels. Fix this by using ip6_tnl_dev_init() as the
ndo_init function. Then ip6_tnl_dev_init() is called after
dev->iflink is set to -1 from register_netdevice().
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When VLAN is in use in macvtap_put_user, we end up setting
csum_start to the wrong place.  The result is that the whoever
ends up doing the checksum setting will corrupt the packet instead
of writing the checksum to the expected location, usually this
means writing the checksum with an offset of -4.

This patch fixes this by adjusting csum_start when VLAN tags are
detected.

Fixes: f09e2249 ("macvtap: restore vlan header on user read")
Cc: stable@vger.kernel.org
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Cheers,
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On i.MX6SX sdb platform, there has two same enet MACs, after system up,
just eth0 is up, and then do suspend/resume test:

[   50.437967] PM: Syncing filesystems ... done.
[   50.476924] Freezing user space processes ... (elapsed 0.005 seconds) done.
[   50.490093] Freezing remaining freezable tasks ... (elapsed 0.004 seconds) done.
[   50.559771] ------------[ cut here ]------------
[   50.564453] WARNING: CPU: 0 PID: 575 at drivers/clk/clk.c:851 __clk_disable+0x60/0x6c()
[   50.572475] Modules linked in:
[   50.575578] CPU: 0 PID: 575 Comm: sh Not tainted 3.18.0-rc2-next-20141031-00007-gf61135b #21
[   50.584031] Backtrace:
[   50.586550] [<80011ecc>] (dump_backtrace) from [<8001206c>] (show_stack+0x18/0x1c)
[   50.594136]  r6:808a7a54 r5:00000000 r4:00000000 r3:00000000
[   50.599920] [<80012054>] (show_stack) from [<806ab3c0>] (dump_stack+0x80/0x9c)
[   50.607187] [<806ab340>] (dump_stack) from [<8002a3e8>] (warn_slowpath_common+0x6c/0x8c)
[   50.615294]  r5:00000353 r4:00000000
[   50.618940] [<8002a37c>] (warn_slowpath_common) from [<8002a42c>] (warn_slowpath_null+0x24/0x2c)
[   50.627738]  r8:00000000 r7:be144c44 r6:be015600 r5:80070013 r4:be015600
[   50.634573] [<8002a408>] (warn_slowpath_null) from [<804f8d4c>] (__clk_disable+0x60/0x6c)
[   50.642777] [<804f8cec>] (__clk_disable) from [<804f8e5c>] (clk_disable+0x2c/0x38)
[   50.650359]  r4:be015600 r3:00000000
[   50.654006] [<804f8e30>] (clk_disable) from [<80420ab4>] (fec_enet_clk_enable+0xc4/0x258)
[   50.662196]  r5:be3cb620 r4:be3cb000
[   50.665838] [<804209f0>] (fec_enet_clk_enable) from [<80421178>] (fec_suspend+0x30/0x180)
[   50.674026]  r7:be144c44 r6:be144c10 r5:8037f5a4 r4:be3cb000
[   50.679802] [<80421148>] (fec_suspend) from [<8037f5d8>] (platform_pm_suspend+0x34/0x64)
[   50.687906]  r10:00000000 r9:00000000 r8:00000000 r7:be144c44 r6:be144c10 r5:8037f5a4
[   50.695852]  r4:be144c10 r3:80421148
[   50.699511] [<8037f5a4>] (platform_pm_suspend) from [<8038784c>] (dpm_run_callback.isra.14+0x34/0x6c)
[   50.708764] [<80387818>] (dpm_run_callback.isra.14) from [<80387f00>] (__device_suspend+0x12c/0x2a4)
[   50.717909]  r9:8098ec8c r8:80973bec r6:00000002 r5:811c7038 r4:be144c10
[   50.724746] [<80387dd4>] (__device_suspend) from [<803894fc>] (dpm_suspend+0x64/0x224)
[   50.732675]  r8:80973bec r7:be144c10 r6:8098ec24 r5:811c7038 r4:be144cc4
[   50.739509] [<80389498>] (dpm_suspend) from [<8038999c>] (dpm_suspend_start+0x60/0x68)
[   50.747438]  r10:8082fa24 r9:00000000 r8:00000004 r7:00000003 r6:00000000 r5:8116ec80
[   50.755386]  r4:00000002
[   50.757969] [<8038993c>] (dpm_suspend_start) from [<800679d8>] (suspend_devices_and_enter+0x90/0x3ec)
[   50.767202]  r4:00000003 r3:8116eca0
[   50.770843] [<80067948>] (suspend_devices_and_enter) from [<80067f40>] (pm_suspend+0x20c/0x2a4)
[   50.779553]  r8:00000004 r7:00000003 r6:00000000 r5:8116ec8c r4:00000003
[   50.786394] [<80067d34>] (pm_suspend) from [<80066858>] (state_store+0x70/0xc0)
[   50.793718]  r6:8116ec90 r5:00000003 r4:bd88a800 r3:0000006d
[   50.799496] [<800667e8>] (state_store) from [<802b0384>] (kobj_attr_store+0x1c/0x28)
[   50.807251]  r10:bd399f78 r8:00000000 r7:bd88a800 r6:bd88a800 r5:00000004 r4:bd085680
[   50.815219] [<802b0368>] (kobj_attr_store) from [<80153090>] (sysfs_kf_write+0x54/0x58)
[   50.823252] [<8015303c>] (sysfs_kf_write) from [<80151fd8>] (kernfs_fop_write+0xd0/0x194)
[   50.831441]  r6:00000004 r5:bd08568c r4:bd085680 r3:8015303c
[   50.837220] [<80151f08>] (kernfs_fop_write) from [<800eddb4>] (vfs_write+0xb8/0x1a8)
[   50.844975]  r10:00000000 r9:00000000 r8:00000000 r7:bd399f78 r6:01336408 r5:00000004
[   50.852924]  r4:bc584dc0
[   50.855505] [<800edcfc>] (vfs_write) from [<800ee0b8>] (SyS_write+0x48/0x88)
[   50.862567]  r10:00000000 r8:00000000 r7:01336408 r6:00000004 r5:bc584dc0 r4:bc584dc0
[   50.870537] [<800ee070>] (SyS_write) from [<8000eb00>] (ret_fast_syscall+0x0/0x48)
[   50.878120]  r9:bd398000 r8:8000ecc4 r7:00000004 r6:76f42b48 r5:01336408 r4:00000004
[   50.885983] ---[ end trace 7545115d752a316a ]---
[   50.890765] ------------[ cut here ]------------

The root cause is that eth1 is not opened and clock is not enabled, and .suspend() still
call .fec_enet_clk_enable() to disable clock.

To avoid the broken, let it check network device up status by calling .netif_running()
before disable/enable clocks.
Signed-off-by: NFugang Duan <B38611@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Herbert Xu says:

====================
tun: Fix csum_start and TUN_PKT_STRIP

The first patch fixes a serious problem that breaks checksum offload
in VMs while the second patch fixes a problem that probably affects
no one.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We set the flag TUN_PKT_STRIP if the user buffer provided is too
small to contain the entire packet plus meta-data.  However, this
has been broken ever since we added GSO meta-data.  VLAN acceleration
also has the same problem.

This patch fixes this by taking both into account when setting the
TUN_PKT_STRIP flag.

The fact that this has been broken for six years without anyone
realising means that nobody actually uses this flag.

Fixes: f43798c2 ("tun: Allow GSO using virtio_net_hdr")
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When VLAN acceleration is in use on the xmit path, we end up
setting csum_start to the wrong place.  The result is that the
whoever ends up doing the checksum setting will corrupt the packet
instead of writing the checksum to the expected location, usually
this means writing the checksum with an offset of -4.

This patch fixes this by adjusting csum_start when VLAN acceleration
is detected.

Fixes: 6680ec68 ("tuntap: hardware vlan tx support")
Cc: stable@vger.kernel.org
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The makefile for sanitizing kernel headers uses the kbuild file
to determine which files to do. Several networking related headers
were missing. Without these headers iproute2 build would break.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix:
net/bridge/netfilter/nft_reject_bridge.c:
In function 'nft_reject_br_send_v6_unreach':
net/bridge/netfilter/nft_reject_bridge.c:240:3:
	error: implicit declaration of function 'csum_ipv6_magic'
   csum_ipv6_magic(&nip6h->saddr, &nip6h->daddr,
   ^
make[3]: *** [net/bridge/netfilter/nft_reject_bridge.o] Error 1

Seen with powerpc:allmodconfig.

Fixes: 523b929d ("netfilter: nft_reject_bridge: don't use IP stack to reject traffic")
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SMC91x is written to explicitly look up the IRQ resource
from the platform device and extract the IRQ and flags, however
the platform_get_irq() does additional things, like call
of_irq_get() in the device tree case, which will translate
the IRQ using the irqdomain and defer the probe if the
IRQ host cannot be found.

As we're not looking up the resource, this will not retrieve
the IRQ flags, but that is better done using
irqd_get_trigger_type(), as the trigger is what the driver
wants to modify. We take care to preserve the semantics that
will make the trigger type provided from the resource
override any local specifier.

Tested on the Nomadik NHK15 which has its SMC91x IRQ line
connected to a STMPE2401 GPIO expander on I2C.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers: net: ethernet: xilinx: xilinx_emaclite: Compatible with 'xlnx, xps-ethernetlite-2.00.b' for QEMU using

When use current latest upstream qemu (current version: 2.1.2), need let
driver compatible with 'xlnx,xps-ethernetlite-2.00.b', or can not find
net device in microblaze qemu. Related QEMU commands under fedora 20:

  yum install libvirt
  yum install tunctl
  tunctl -b
  ip link set tap0 up
  brctl addif virbr0 tap0
  ./microblaze-softmmu/qemu-system-microblaze -M petalogix-s3adsp1800 \
    -kernel ../linux-stable.microblaze/arch/microblaze/boot/linux.bin \
    -no-reboot -append "console=ttyUL0,115200 doreboot" -nographic \
    -net nic,vlan=0,model=xlnx.xps-ethernetlite,macaddr=00:16:35:AF:94:00 \
    -net tap,vlan=0,ifname=tap0,script=no,downscript=no

  in microblaze qemu bash (guest machine):

    ifconfig eth0 add 192.168.122.2 netmask 255.255.255.0
    ifconfig eth0 up

After add this patch, can find the device, and can be used by 'telnetd'
(need cross-build busybox with glibc for it), then outside can telnet to
it without password.
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: systemport: TX dma fixes

This patch series contains two fixes for our transmit path, first one
is a pretty nasty one since we were not allocating a large enough
dma coherent pool for our transmit descriptors, which would work most of the
time, since allocations are contiguous and we could have.

Second patch fixes a less frequent, though highly likley crash when using
CMA allocations.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Callers of bcm_sysport_init_tx_ring() can currently fail, and will
always call bcm_sysport_fini_tx_ring() in a loop ending at the number of
TX queues (32) without checking if the TX ring was successfully
initialized or not.

Update bcm_sysport_fini_tx_ring() to return early and avoid a crash
de-referencing ring->cbs if the TX ring was not initialized, since
ring->cbs is the last part of the initialization done by
bcm_sysport_init_tx_ring() that could fail.

Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Reported-by: NMaxime Bizon <mbizon@freebox.fr>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should not be allocating a single byte of DMA coherent memory, but
instead a full-sized struct dma_desc (8 bytes).

Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

we are allocating memory using kzalloc for struct mvpp2_prs_entry,
but later when we are getting error we were just returning the error
value without releasing the memory.
Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reported-by: NMeelis Roos <mroos@linux.ee>
Tested-by: NMeelis Roos <mroos@linux.ee>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull input updates from Dmitry Torokhov:
 "A bunch of fixes for minor defects reported by Coverity, a few driver
  fixups and revert of i8042.nomux change so that we are once again
  enable active MUX mode if box claims to support it"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: i8042 - disable active multiplexing by default"
  Input: altera_ps2 - use correct type for irq return value
  Input: altera_ps2 - write to correct register when disabling interrupts
  Input: max77693-haptic - fix potential overflow
  Input: psmouse - remove unneeded check in psmouse_reconnect()
  Input: vsxxxaa - fix code dropping bytes from queue
  Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store()
  Input: opencores-kbd - fix error handling
  Input: wm97xx - adapt parameters to tosa touchscreen.
  Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544
  Input: stmpe-keypad - fix valid key line bitmask
  Input: soc_button_array - update calls to gpiod_get*()

Pull ACPI and power management fixes from Rafael Wysocki:
 "These are fixes received after my previous pull request plus one that
  has been in the works for quite a while, but its previous version
  caused problems to happen, so it's been deferred till now.

  Fixed are two recent regressions (MFD enumeration and cpufreq-dt),
  ACPI EC regression introduced in 3.17, system suspend error code path
  regression introduced in 3.15, an older bug related to recovery from
  failing resume from hibernation and a cpufreq-dt driver issue related
  to operation performance points.

  Specifics:

   - Fix a crash on r8a7791/koelsch during resume from system suspend
     caused by a recent cpufreq-dt commit (Geert Uytterhoeven).

   - Fix an MFD enumeration problem introduced by a recent commit adding
     ACPI support to the MFD subsystem that exposed a weakness in the
     ACPI core causing ACPI enumeration to be applied to all devices
     associated with one ACPI companion object, although it should be
     used for one of them only (Mika Westerberg).

   - Fix an ACPI EC regression introduced during the 3.17 cycle causing
     some Samsung laptops to misbehave as a result of a workaround
     targeted at some Acer machines.  That includes a revert of a commit
     that went too far and a quirk for the Acer machines in question.
     From Lv Zheng.

   - Fix a regression in the system suspend error code path introduced
     during the 3.15 cycle that causes it to fail to take errors from
     asychronous execution of "late" suspend callbacks into account
     (Imre Deak).

   - Fix a long-standing bug in the hibernation resume error code path
     that fails to roll back everything correcty on "freeze" callback
     errors and leaves some devices in a "suspended" state causing more
     breakage to happen subsequently (Imre Deak).

   - Make the cpufreq-dt driver disable operation performance points
     that are not supported by the VR connected to the CPU voltage plane
     with acceptable tolerance instead of constantly failing voltage
     scaling later on (Lucas Stach)"

* tag 'pm+acpi-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer.
  Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC"
  cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus)
  PM / Sleep: fix recovery during resuming from hibernation
  PM / Sleep: fix async suspend_late/freeze_late error handling
  ACPI: Use ACPI companion to match only the first physical device
  cpufreq: cpufreq-dt: disable unsupported OPPs

Pull PCI fixes from Bjorn Helgaas:
 "These changes, intended for v3.18, fix:

  Sysfs
    - Fix "enable" filename change (Greg Kroah-Hartman)

      An unintentional sysfs filename change in commit 5136b2da
      ("PCI: convert bus code to use dev_groups"), which appeared in
      v3.13, changed "enable" to "enabled", and this changes it back.

      Old users of "enable" are currently broken and will be helped by
      this change.  Anything that started to use "enabled" after v3.13
      will be broken by this change.  If necessary, we can add a symlink
      to make both work, but this patch doesn't do that.

  PCI device hotplug
    - Revert duplicate merge (Kamal Mostafa)

      A mistaken duplicate merge that added a check twice.  Nothing's
      broken; this just removes the unnecessary code.

  Freescale i.MX6
    - Wait for clocks to stabilize after ref_en (Richard Zhu)

      An i.MX6 clock problem that prevents mx6 nitrogen boards from booting"

* tag 'pci-v3.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Rename sysfs 'enabled' file back to 'enable'
  PCI: imx6: Wait for clocks to stabilize after ref_en
  Revert duplicate "PCI: pciehp: Prevent NULL dereference during probe"

Rusty noticed a Really Bad Bug (tm) in my NT fix.  The entry code
reads out of bounds, causing the NT fix to be unreliable.  But, and
this is much, much worse, if your stack is somehow just below the
top of the direct map (or a hole), you read out of bounds and crash.

Excerpt from the crash:

[    1.129513] RSP: 0018:ffff88001da4bf88  EFLAGS: 00010296

  2b:*    f7 84 24 90 00 00 00     testl  $0x4000,0x90(%rsp)

That read is deterministically above the top of the stack.  I
thought I even single-stepped through this code when I wrote it to
check the offset, but I clearly screwed it up.

Fixes: 8c7aa698 ("x86_64, entry: Filter RFLAGS.NT on entry from userspace")
Reported-by: NRusty Russell <rusty@ozlabs.org>
Cc: stable@vger.kernel.org
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull ext4 bugfixes from Ted Ts'o:
 "A set of miscellaneous ext4 bug fixes for 3.18"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: make ext4_ext_convert_to_initialized() return proper number of blocks
  ext4: bail early when clearing inode journal flag fails
  ext4: bail out from make_indexed_dir() on first error
  jbd2: use a better hash function for the revoke table
  ext4: prevent bugon on race between write/fcntl
  ext4: remove extent status procfs files if journal load fails
  ext4: disallow changing journal_csum option during remount
  ext4: enable journal checksum when metadata checksum feature enabled
  ext4: fix oops when loading block bitmap failed
  ext4: fix overflow when updating superblock backups after resize

Pull quota and ext3 fixes from Jan Kara.

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fs, jbd: use a more generic hash function
  quota: Properly return errors from dquot_writeback_dquots()
  ext3: Don't check quota format when there are no quota files

Pull networking fixes from David Miller:
 "A bit has accumulated, but it's been a week or so since my last batch
  of post-merge-window fixes, so...

   1) Missing module license in netfilter reject module, from Pablo.
      Lots of people ran into this.

   2) Off by one in mac80211 baserate calculation, from Karl Beldan.

   3) Fix incorrect return value from ax88179_178a driver's set_mac_addr
      op, which broke use of it with bonding.  From Ian Morgan.

   4) Checking of skb_gso_segment()'s return value was not all
      encompassing, it can return an SKB pointer, a pointer error, or
      NULL.  Fix from Florian Westphal.

      This is crummy, and longer term will be fixed to just return error
      pointers or a real SKB.

   6) Encapsulation offloads not being handled by
      skb_gso_transport_seglen().  From Florian Westphal.

   7) Fix deadlock in TIPC stack, from Ying Xue.

   8) Fix performance regression from using rhashtable for netlink
      sockets.  The problem was the synchronize_net() invoked for every
      socket destroy.  From Thomas Graf.

   9) Fix bug in eBPF verifier, and remove the strong dependency of BPF
      on NET.  From Alexei Starovoitov.

  10) In qdisc_create(), use the correct interface to allocate
      ->cpu_bstats, otherwise the u64_stats_sync member isn't
      initialized properly.  From Sabrina Dubroca.

  11) Off by one in ip_set_nfnl_get_byindex(), from Dan Carpenter.

  12) nf_tables_newchain() was erroneously expecting error pointers from
      netdev_alloc_pcpu_stats().  It only returna a valid pointer or
      NULL.  From Sabrina Dubroca.

  13) Fix use-after-free in _decode_session6(), from Li RongQing.

  14) When we set the TX flow hash on a socket, we mistakenly do so
      before we've nailed down the final source port.  Move the setting
      deeper to fix this.  From Sathya Perla.

  15) NAPI budget accounting in amd-xgbe driver was counting descriptors
      instead of full packets, fix from Thomas Lendacky.

  16) Fix total_data_buflen calculation in hyperv driver, from Haiyang
      Zhang.

  17) Fix bcma driver build with OF_ADDRESS disabled, from Hauke
      Mehrtens.

  18) Fix mis-use of per-cpu memory in TCP md5 code.  The problem is
      that something that ends up being vmalloc memory can't be passed
      to the crypto hash routines via scatter-gather lists.  From Eric
      Dumazet.

  19) Fix regression in promiscuous mode enabling in cdc-ether, from
      Olivier Blin.

  20) Bucket eviction and frag entry killing can race with eachother,
      causing an unlink of the object from the wrong list.  Fix from
      Nikolay Aleksandrov.

  21) Missing initialization of spinlock in cxgb4 driver, from Anish
      Bhatt.

  22) Do not cache ipv4 routing failures, otherwise if the sysctl for
      forwarding is subsequently enabled this won't be seen.  From
      Nicolas Cavallari"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (131 commits)
  drivers: net: cpsw: Support ALLMULTI and fix IFF_PROMISC in switch mode
  drivers: net: cpsw: Fix broken loop condition in switch mode
  net: ethtool: Return -EOPNOTSUPP if user space tries to read EEPROM with lengh 0
  stmmac: pci: set default of the filter bins
  net: smc91x: Fix gpios for device tree based booting
  mpls: Allow mpls_gso to be built as module
  mpls: Fix mpls_gso handler.
  r8152: stop submitting intr for -EPROTO
  netfilter: nft_reject_bridge: restrict reject to prerouting and input
  netfilter: nft_reject_bridge: don't use IP stack to reject traffic
  netfilter: nf_reject_ipv6: split nf_send_reset6() in smaller functions
  netfilter: nf_reject_ipv4: split nf_send_reset() in smaller functions
  netfilter: nf_tables_bridge: update hook_mask to allow {pre,post}routing
  drivers/net: macvtap and tun depend on INET
  drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets
  drivers/net: Disable UFO through virtio
  net: skb_fclone_busy() needs to detect orphaned skb
  gre: Use inner mac length when computing tunnel length
  mlx4: Avoid leaking steering rules on flow creation error flow
  net/mlx4_en: Don't attempt to TX offload the outer UDP checksum for VXLAN
  ...

Pull sparc update from David Miller:
 "Two changes:

  1) It makes no sense to execute a VTOC partition table request in the
     Sun virtual block device driver and fail to load if it doesn't
     succeed because a) we don't use the result at all and b) it won't
     succeed if there is an EFI partition on the disk, for example.

     We read the partition table via the normal means in the block layer
     anyways, so this is really completely useless, so just remove it.

     From Dwight Engen.

  2) Hook up new bpf system call"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sunvdc: don't call VD_OP_GET_VTOC
  sparc: Hook up bpf system call.

Pull Microblaze updates from Michal Simek:
 - wire-up new bpf syscall
 - fix PCI bug
 - fix Kconfig warning

* tag 'microblaze-3.18-rc3' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Wire up bpf syscall
  microblaze: Fix IO space breakage after of_pci_range_to_resource() change
  microblaze: Fix missing NR_CPUS in menuconfig

Pull x86 fixes from Ingo Molnar:
 "Fixes from all around the place:

   - hyper-V 32-bit PAE guest kernel fix
   - two IRQ allocation fixes on certain x86 boards
   - intel-mid boot crash fix
   - intel-quark quirk
   - /proc/interrupts duplicate irq chip name fix
   - cma boot crash fix
   - syscall audit fix
   - boot crash fix with certain TSC configurations (seen on Qemu)
   - smpboot.c build warning fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, pageattr: Prevent overflow in slow_virt_to_phys() for X86_PAE
  ACPI, irq, x86: Return IRQ instead of GSI in mp_register_gsi()
  x86, intel-mid: Create IRQs for APB timers and RTC timers
  x86: Don't enable F00F workaround on Intel Quark processors
  x86/irq: Fix XT-PIC-XT-PIC in /proc/interrupts
  x86, cma: Reserve DMA contiguous area after initmem_init()
  i386/audit: stop scribbling on the stack frame
  x86, apic: Handle a bad TSC more gracefully
  x86: ACPI: Do not translate GSI number if IOAPIC is disabled
  x86/smpboot: Move data structure to its primary usage scope

* pm-cpufreq:
  cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus)
  cpufreq: cpufreq-dt: disable unsupported OPPs

* pm-sleep:
  PM / Sleep: fix recovery during resuming from hibernation
  PM / Sleep: fix async suspend_late/freeze_late error handling

* acpi-scan:
  ACPI: Use ACPI companion to match only the first physical device

* acpi-ec:
  ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer.
  Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC"