- 06 12月, 2006 3 次提交
-
-
由 Ulrich Kunitz 提交于
Support for multicast adresses is implemented by supporting the set_multicast_list() function of the network device. Address filtering is supported by a group hash table in the device. This is based on earlier work by Benoit Papillaut. Fixes multicast packet reception and ipv6 connectivity: http://bugzilla.kernel.org/show_bug.cgi?id=7424 http://bugzilla.kernel.org/show_bug.cgi?id=7425Signed-off-by: NUlrich Kunitz <kune@deine-taler.de> Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Drake 提交于
This is needed for NetworkManager users to connect to WPA networks. Pointed out by Matthew Campbell. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Drake 提交于
e.g. usb 1-7: rx_urb_complete() *** first fragment *** usb 1-7: rx_urb_complete() *** second fragment *** drivers/net/wireless/zd1211rw/zd_mac.c:1063 ASSERT (((current_thread_info()->preempt_count) & (((1UL << (12))-1) << ((0 + 8) + 8)))) VIOLATED! [<f0299448>] zd_mac_rx+0x3e7/0x47a [zd1211rw] [<f029badc>] rx_urb_complete+0x22d/0x24a [zd1211rw] [<b028a22f>] urb_destroy+0x0/0x5 [<b01f0930>] kref_put+0x65/0x72 [<b0288cdf>] usb_hcd_giveback_urb+0x28/0x57 [<b02950c4>] qh_completions+0x296/0x2f6 [<b0294b21>] ehci_urb_done+0x70/0x7a [<b0294ea1>] qh_completions+0x73/0x2f6 [<b02951bc>] ehci_work+0x98/0x538 Remove the bogus assertion, and use dev_kfree_skb_any as pointed out by Ulrich Kunitz. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 12月, 2006 37 次提交
-
-
由 Matthew Wilcox 提交于
CONFIG_LBD and CONFIG_LSF are spread into asm/types.h for no particularly good reason. Centralising the definition in linux/types.h means that arch maintainers don't need to bother adding it, as well as fixing the problem with x86-64 users being asked to make a decision that has absolutely no effect. The H8/300 porters seem particularly confused since I'm not aware of any microcontrollers that need to support 2TB filesystems. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://brick.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] blktrace: don't return blktrace_seq from trace_note() [PATCH] blktrace: uninline trace_note()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (31 commits) ocfs2: implement i_op->permission configfs: make configfs_dirent_exists() static ocfs2: update file system paths to set atime ocfs2: core atime update functions ocfs2: Add splice support ocfs2: Remove ocfs2_write_should_remove_suid() [PATCH] Export should_remove_suid() configfs: mutex_lock_nested() fix ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t ocfs2: remove handle argument to ocfs2_start_trans() ocfs2: remove ocfs2_journal_handle journal field ocfs2: pass ocfs2_super * into ocfs2_commit_trans() ocfs2: remove unused handle argument from ocfs2_meta_lock_full() ocfs2: make ocfs2_alloc_handle() static ocfs2: remove unused ocfs2_handle_add_lock() ocfs2: remove unused ocfs2_handle_add_inode() ocfs2: Don't allocate handle early in ocfs2_rename() ocfs2: don't use handle for locking in allocation functions ocfs2: don't pass handle to ocfs2_meta_lock in ocfs2_rename() ocfs2: don't pass handle to ocfs2_meta_lock in ocfs2_symlink() ...
-
由 Al Viro 提交于
ip_summed changes last summer had missed that one. As the result, we have ip_summed interpreted as CHECKSUM_PARTIAL now. IOW, ->csum is interpreted as offset of checksum in the packet. net/core/* will both read and modify the value as that offset, with obvious reasons. At the very least it's a remote memory corruptor. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Cleanup memory barriers for weakly ordered systems. [MIPS] Alchemy: Automatically enable CONFIG_RESOURCES_64BIT for PCI configs. [MIPS] Unify csum_partial.S [MIPS] SWARM: Fix a typo in #error directives [MIPS] Fix atomic.h build errors. [MIPS] Use SYSVIPC_COMPAT to fix various problems on N32 [MIPS] klconfig add missing bracket
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (194 commits) [POWERPC] Add missing EXPORTS for mpc52xx support [POWERPC] Remove obsolete PPC_52xx and update CLASSIC32 comment [POWERPC] ps3: add a default zImage target [POWERPC] Add of_platform_bus support to mpc52xx psc uart driver [POWERPC] typo fix and whitespace cleanup on mpc52xx-uart driver [POWERPC] Fix debug printks for 32-bit resources in the PCI code [POWERPC] Replace kmalloc+memset with kzalloc [POWERPC] Linkstation / kurobox support [POWERPC] Add the e300c3 core to the CPU table. [POWERPC] ppc: m48t35 add missing bracket [POWERPC] iSeries: don't build head_64.o unnecessarily [POWERPC] iSeries: stop dt_mod.o being rebuilt unnecessarily [POWERPC] Fix cputable.h for combined build [POWERPC] Allow CONFIG_BOOTX_TEXT on iSeries [POWERPC] Allow xmon to build on legacy iSeries [POWERPC] Change ppc64_defconfig to use AUTOFS_V4 not V3 [POWERPC] Tell firmware we can handle POWER6 compatible mode [POWERPC] Clean images in arch/powerpc/boot [POWERPC] Fix OF pci flags parsing [POWERPC] defconfig for lite5200 board ...
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
The support for the 52xx-based systems is now included under CONFIG_CLASSIC32, since the 52xx chips have a 603e-based core. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add a powerpc make target that can be loaded by the ps3 bootloader (kboot) and set this as the default image to build for that platform. Until the compressed zImage wrapper is made, this arranges for a stripped vmlinux image to be built. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
Needed to support mpc52xx boards in arch/powerpc. This patch retains the platform_bus support when compiling for arch/ppc, but uses the of_platform bindings for arch/powerpc. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NSylvain Munaut <tnt@246tNt.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
Single typo fix and whitespace changes. In preparation for heavy changes to this driver when support for arch/powerpc is added. Since the driver will be changing significantly anyway, then may as well take the opportunity to clean it up first. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NSylvain Munaut <tnt@246tNt.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ralf Baechle 提交于
Also the R4000 / R4600 LL/SC instructions imply a sync so no explicit sync needed. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, copying with parallel, supporting PREFETCH, etc.) easier. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
This is a fix for a typo repeated several times in #error directives for invalid SiByte configurations. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
For the definition of atomic64_t atomic.h was relying on <asm/types.h> having been included previously. Before changeset d89d8e0637a5e4e0a12e90c4bc934d0d4c335239 this was happening as a side effect of including <linux/spinlock.h>. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
N32 SysV IPC system calls should use 32-bit compatible code. arch/mips/kernel/linux32.c have similar compatible code for O32, but ipc/compat.c seems more complete. We can use it for both N32 and O32. This patch should fix these problems (and other possible problems): http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1149188824.6986.6.camel%40diimka-laptop http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=44C6B829.8050508%40caviumnetworks.comSigned-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Mariusz Kozlowski 提交于
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (82 commits) [PATCH] pata_ali: small fixes [PATCH] pata_via: VIA 8251 bridged systems are now out and about [PATCH] trivial piix: swap bogus dot for comma space [PATCH] sata_promise: PHYMODE4 fixup [PATCH] libata: always use polling IDENTIFY [libata] pata_cs5535: fix build [PATCH] ahci: do not powerdown during initialization [PATCH] libata: prepare ata_sg_clean() for invocation from EH [PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf() [PATCH] libata: implement ata_exec_internal_sg() [PATCH] libata: make sure IRQ is cleared after ata_bmdma_freeze() [PATCH] libata: move BMDMA host status recording from EH to interrupt handler [PATCH] libata: make sure sdev doesn't go away while rescanning [PATCH] libata: don't request sense if the port is frozen [PATCH] libata: fix READ CAPACITY simulation [PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, take #2 [PATCH] libata: set IRQF_SHARED for legacy PCI IDE IRQs [PATCH] libata: remove unused HSM_ST_UNKNOWN [PATCH] libata: kill unnecessary sht->max_sectors initializations [PATCH] libata: add missing sht->slave_destroy ...
-
由 Alan 提交于
Switch to pci_get_bus_and_slot because some x86 systems seem to be handing us a device with dev->bus = NULL. Also don't apply the isa fixup to revision C6 and later of the chip. Really we need to work out wtf is handing us pdev->bus = NULL, but firstly and more importantly we need the drivers working. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
OK, that seems to be enough to deal with the mess. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This was exposed by Al's recent header file dependency reduction patches.. Cc: Al Viro <viro@ftp.linux.org.uk> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* 'for-linus4' of master.kernel.org:/pub/scm/linux/kernel/git/viro/bird: [PATCH] severing poll.h -> mm.h [PATCH] severing skbuff.h -> mm.h [PATCH] severing skbuff.h -> poll.h [PATCH] severing skbuff.h -> highmem.h [PATCH] severing uaccess.h -> sched.h [PATCH] severing fs.h, radix-tree.h -> sched.h [PATCH] severing module.h->sched.h
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [SUNHME]: Fix for sunhme failures on x86 [XFRM] xfrm_user: Better validation of user templates. [DCCP] tfrc: Binary search for reverse TFRC lookup [DCCP] ccid3: Deprecate TFRC_SMALLEST_P [DCCP] tfrc: Identify TFRC table limits and simplify code [DCCP] tfrc: Add protection against invalid parameters to TFRC routines [DCCP] tfrc: Fix small error in reverse lookup of p for given f(p) [DCCP] tfrc: Document boundaries and limits of the TFRC lookup table [DCCP] ccid3: Fix warning message about illegal ACK [DCCP] ccid3: Fix bug in calculation of send rate [DCCP]: Fix BUG in retransmission delay calculation [DCCP]: Use higher RTO default for CCID3
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (34 commits) [S390] Don't use small stacks when lockdep is used. [S390] cio: Use device_reprobe() instead of bus_rescan_devices(). [S390] cio: Retry internal operations after vary off. [S390] cio: Use path verification for last path gone after vary off. [S390] non-unique constant/macro identifiers. [S390] Memory detection fixes. [S390] cio: Make ccw_dev_id_is_equal() more robust. [S390] Convert extmem spin_lock into a mutex. [S390] set KBUILD_IMAGE. [S390] lockdep: show held locks when showing a stackdump [S390] Add dynamic size check for usercopy functions. [S390] Use diag260 for memory size detection. [S390] pfault code cleanup. [S390] Cleanup memory_chunk array usage. [S390] Misaligned wait PSW at memory detection. [S390] cpu shutdown rework [S390] cpcmd <-> __cpcmd calling issues [S390] Bad kexec control page allocation. [S390] Reset infrastructure for re-IPL. [S390] Some documentation typos. ...
-
由 Greg Ungerer 提交于
This patch adds missing bracket. Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Make the m68knommu DMA handling consistent with other architectures. Compile problems pointed out by Adrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Remove use of __rom_end symbol all together. This helps clean out the miscellaneous symbols lying around in the m68knommu linker script. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Here is a small patch to automatically detect the DRAM size on m520x. It was generated against 2.6.17-uc0, and tested on an Intec 5208 dev board. (This part of the patch if the memory register defines for the 520x ColdFire CPU family - Greg). Signed-off-by: NMichael Broughton <mbobowik@telusplanet.net> Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Broughton 提交于
Here is a small patch to automatically detect the DRAM size on m520x. It was generated against 2.6.17-uc0, and tested on an Intec 5208 dev board. Signed-off-by: NMichael Broughton <mbobowik@telusplanet.net> Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Wu 提交于
It turns out SHMAT, SHMDT, SHMGET and SHMCTL support in sys_ipc() for m68knommu in 2.6 kernel(uClinux-dist-20060803 release) is missing. (copied from m68k sources, report by David Wu <davidwu@arcturusnetworks.com>) Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Specify printk level in m68knommu stack dump code. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Specify printk level in m68knommu oops dump code. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-