tmio_mmc_host has .enable_dma callback now.
We don't need TMIO_MMC_HAVE_CTL_DMA_REG anymore.
Let's remove it
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Now, sh_mobile_sdhi can use 32bit DMA access in R-Cer Gen2.
Let's use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

tmio_mmc_dma has .enable_dma callback now.
let's use it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

getting struct sh_mobile_sdhi from struct mmc_host needs to use
complex container_of(). This patch adds new host_to_priv macro to
get it easily.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Latest SDHI on Renesas has expand register mapping.
update mmc_data->bus_shift for it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

No one is using .init/.cleanup callback function.
Let's remove these.
sdhi_ops and .cd_wakeup are also removed
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Renesas SDHI which is based on TMIO driver has 2 type SoC. 1st one is
used as SH-Mobile series, and 2nd is R-Car series. R-Car series SoC has
DMA buswidth setting register which enables 32bit access.
This patch adds .dma_buswidth and enables it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Some controllers need DMA special register/setting.
This patch adds new .enable_dma callback for it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Current .dma_rx_offset is implemented under tmio_mmc_dma.
It goes to tmio_mmc_data by this patch.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Current .alignment_shift is implemented under tmio_mmc_dma.
It goes to tmio_mmc_data by this patch.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Current .bus_shift is implemented under tmio_mmc_data.
It goes to tmio_mmc_host by this patch.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Current .multi_io_quirk is implemented under tmio_mmc_data.
It goes to tmio_mmc_host by this patch.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Current .clk_disable is implemented under tmio_mmc_data.
It goes to tmio_mmc_host by this patch.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Current .clk_enable is implemented under tmio_mmc_data.
It goes to tmio_mmc_host by this patch.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Current .write16_hook is implemented under tmio_mmc_data.
It goes to tmio_mmc_host by this patch.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Current .dma is implemented under tmio_mmc_data.
It goes to tmio_mmc_host by this patch.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Current tmio_mmc driver is using tmio_mmc_data for driver/platform
specific data/callback, and it is needed for tmio_mmc_host_probe()
function. Because of this style, include/linux/mfd/tmio.h header has
tmio driver/framework specific data which is not needed from platform.

This patch adds new tmio_mmc_host_alloc/free() as cleanup preparation.
tmio driver specific data/callback will be implemented in tmio_mmc_host,
and platform specific data/callback will be implemented in tmio_mmc_data
in this cleanup.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This patch adds new host controller driver for
Fujitsu SDHCI controller f_sdh30.
Signed-off-by: NVincent Yang <Vincent.Yang@tw.fujitsu.com>
Signed-off-by: NAndy Green <andy.green@linaro.org>
Signed-off-by: NTetsuya Takinishi <t.takinishi@jp.fujitsu.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This patch defines a quirk to disable the block count
for single block transactions.
It is a preparation and will be used by Fujitsu
SDHCI controller f_sdh30 driver.
Signed-off-by: NVincent Yang <Vincent.Yang@tw.fujitsu.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This patch defines a quirk for tuning work
around for some sdhci host controller. It sets
both SDHCI_CTRL_EXEC_TUNING and SDHCI_CTRL_TUNED_CLK
for tuning.
It is a preparation and will be used by Fujitsu
SDHCI controller f_sdh30 driver.
Signed-off-by: NVincent Yang <Vincent.Yang@tw.fujitsu.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This patch adds a callback function to do
controller-specific actions when switching voltages.
It is a preparation and will be used by Fujitsu
SDHCI controller f_sdh30 driver.
Signed-off-by: NVincent Yang <Vincent.Yang@tw.fujitsu.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

If we power up vqmmc in MMC_POWER_ON then we end up turning it on
before mmc_power_up() sets the signal voltage.  That's not so great
since we might be powering it up at the wrong voltage.

Note that this is how Yuvaraj originally coded things up in
<https://patchwork.kernel.org/patch/4401231/> but he changed it on my
suggestion.  Apparently I was wrong.
Reported-by: NAlexandru M Stan <amstan@chromium.org>
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This patch solves the coding style issue by adding a space
before (
Signed-off-by: NMohammad Jamal <md.jamalmohiuddin@gmail.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This patch calls pm_runtime_put_noidle() to restore the device's usage
counter in the ->remove() implementation.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Commit 0dcaa249 ("sdhci-pxav3: Fix runtime PM initialization") tries
to fix one hang issue caused by calling sdhci_add_host() on a suspended
device. The fix enables the clock twice, once by clk_prepare_enable() and
another by pm_runtime_get_sync(), meaning that the clock will never be
gated at runtime PM suspend. I observed the power consumption regression on
Marvell BG2Q SoCs.

In fact, the fix is not correct. There still be a very small window
during which a runtime suspend might somehow occur after pm_runtime_enable()
but before pm_runtime_get_sync().

This patch fixes all of the two problems by just incrementing the usage
counter before pm_runtime_enable(). It also adjust the order of disabling
runtime pm and storing the usage count in the error path to handle clock
gating properly.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Cc: <stable@vger.kernel.org> # v3.11+
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

There is no point making the initialization
of buf_ready_int conditional on host version.
Simplify by just doing it always. Note that
the other conditional initializations will be
removed when the new way of doing re-tuning
is taken into use.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Both callers of mmc_start_request() call mmc_card_removed()
so move that call into mmc_start_request().

This patch is preparation for adding re-tuning support.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

For each MMC, SD and SDIO there is code that
holds the clock, calls ops->execute_tuning, and
releases the clock. Simplify the code a bit by
providing a separate function to do that.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This ensures that all standard options are available to hsmmc,
In particular, I need cap-power-off-card.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Using the common code removes some code duplication, and
makes it easier to switch to using mmc_of_parse() which
will remove more duplication.

This uses the new mmc_gpio_request_cd_isr to provide a non-standard
interrupt service routine for card-detect interrupts.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

One of the reasons omap_hsmmc doesn't use the slot-gpio library
is that it has some non-standard functionality in the card-detect
interrupt service routine.

To make it possible for omap_hsmmc (and maybe others) to be converted
to use slot-gpio, add 'mmc_gpio_request_cd_isr' which provide an
alternate isr to be register by the slot-gpio code.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Just fix the comments, no functional changes.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Enable power cycle and re-initialization of SD cards via the reset
bus_ops. Power cycling a buggy SD card sometimes helps it get back on
track.
Signed-off-by: NJohan Rudholm <johanru@axis.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Move the (e)MMC specific hw_reset code from core.c into mmc.c. Call the
code from the new bus_ops member "reset". This also allows for adding
a SD card specific reset procedure.
Signed-off-by: NJohan Rudholm <johanru@axis.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Always check if the card is alive after a successful reset. This allows
us to remove mmc_hw_reset_check(), leaving mmc_hw_reset() as the only
card reset interface.
Signed-off-by: NJohan Rudholm <johanru@axis.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This adds SDIO devicetree subnode parsing to the mmc core. While
SDIO devices are runtime probable they sometimes need nonprobable
additional information on embedded systems, like an additional gpio
interrupt or a clock. This patch makes it possible to supply this
information from the devicetree. SDIO drivers will find a pointer
to the devicenode in their devices of_node pointer.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
[hdegoede@redhat.com: Misc. cleanups]
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

While SDIO devices are runtime probable they sometimes need nonprobable
additional information on embedded systems, like an additional gpio
interrupt or a clock. This binding describes how to add child nodes to the
devicetree to supply this information.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
[hdegoede@redhat.com: Documented the need for #address- and #size-cells]
[hdegoede@redhat.com: Added a real world example]
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This patch is based on the patches by Per Forlin, Tony Lin and Ryan QIAN.

This patch complete the API 'post_req' and 'pre_req' in sdhci host side,

Test Env:
1. i.MX6Q-SABREAUTO board, CPU @ 996MHz, use ADMA in uSDHC controller.
2. Test command:
		$ echo 1 > /proc/sys/vm/drop_caches
	write to sd card:
		$ dd if=/dev/zero of=/dev/mmcblk0 bs=1M count=2000 conv=fsync
	read the sd card:
		$ dd if=/dev/mmcblk0 of=/dev/null bs=1M count=2000

3. TOSHIBA 16GB SD3.0 card, running at 4 bit, SDR104 @ 198MHZ
	Performance with and without this patch:
      -------------------------------------------------
	  |                    | read speed | write speed |
	  |------------------------------------------------
	  | with this patch    | ~76.7 MB/s |  ~23.3 MB/s |
	  |------------------------------------------------
	  |without this patch  | ~60.5 MB/s |  ~22.5 MB/s |
	  -------------------------------------------------

4. SanDisk 8GB SD3.0 card, running at 4 bit, DDR50 @ 50MHZ
	Performance with and without this patch:
      -------------------------------------------------
	  |                    | read speed | write speed |
	  |------------------------------------------------
	  | with this patch    | ~40.5 MB/s |  ~15.6 MB/s |
	  |------------------------------------------------
	  |without this patch  | ~36.1 MB/s |  ~14.1 MB/s |
	  -------------------------------------------------

5. Kingston 8GB SD2.0 card, running at 4 bit, High-speed @ 50MHZ
	Performance with and without this patch:
      -------------------------------------------------
	  |                    | read speed | write speed |
	  |------------------------------------------------
	  | with this patch    | ~22.7 MB/s |  ~8.2 MB/s  |
	  |------------------------------------------------
	  |without this patch  | ~21.3 MB/s |  ~8.0 MB/s  |
	  -------------------------------------------------

6. About eMMC, Sandisk 8GB eMMC on i.MX6DL-sabresd board, CPU @ 792MHZ,
   eMMC running at 8 bit, DDR52 @ 52MHZ.
	Performance with and without this patch:
      -------------------------------------------------
	  |                    | read speed | write speed |
	  |------------------------------------------------
	  | with this patch    | ~37.3 MB/s |  ~10.5 MB/s |
	  |------------------------------------------------
	  |without this patch  | ~33.4 MB/s |  ~10.5 MB/s |
	  -------------------------------------------------
Signed-off-by: NHaibo Chen <haibo.chen@freescale.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>