Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 18 5月, 2011 2 次提交
  3. 17 5月, 2011 1 次提交
  5. 14 5月, 2011 1 次提交
    • P
      net:set valid name before calling ndo_init() · 0696c3a8
      由 Peter Pan(潘卫平) 提交于 
      In commit 1c5cae81 (net: call dev_alloc_name from register_netdevice),
a bug of bonding was involved, see example 1 and 2.

In register_netdevice(), the name of net_device is not valid until
dev_get_valid_name() is called. But dev->netdev_ops->ndo_init(that is
bond_init) is called before dev_get_valid_name(),
and it uses the invalid name of net_device.

I think register_netdevice() should make sure that the name of net_device is
valid before calling ndo_init().

example 1:
modprobe bonding
ls  /proc/net/bonding/bond%d

ps -eLf
root      3398     2  3398  0    1 21:34 ?        00:00:00 [bond%d]

example 2:
modprobe bonding max_bonds=3

[  170.100292] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[  170.101090] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[  170.102469] ------------[ cut here ]------------
[  170.103150] WARNING: at /home/pwp/net-next-2.6/fs/proc/generic.c:586 proc_register+0x126/0x157()
[  170.104075] Hardware name: VirtualBox
[  170.105065] proc_dir_entry 'bonding/bond%d' already registered
[  170.105613] Modules linked in: bonding(+) sunrpc ipv6 uinput microcode ppdev parport_pc parport joydev e1000 pcspkr i2c_piix4 i2c_core [last unloaded: bonding]
[  170.108397] Pid: 3457, comm: modprobe Not tainted 2.6.39-rc2+ #14
[  170.108935] Call Trace:
[  170.109382]  [<c0438f3b>] warn_slowpath_common+0x6a/0x7f
[  170.109911]  [<c051a42a>] ? proc_register+0x126/0x157
[  170.110329]  [<c0438fc3>] warn_slowpath_fmt+0x2b/0x2f
[  170.110846]  [<c051a42a>] proc_register+0x126/0x157
[  170.111870]  [<c051a4dd>] proc_create_data+0x82/0x98
[  170.112335]  [<f94e6af6>] bond_create_proc_entry+0x3f/0x73 [bonding]
[  170.112905]  [<f94dd806>] bond_init+0x77/0xa5 [bonding]
[  170.113319]  [<c0721ac6>] register_netdevice+0x8c/0x1d3
[  170.113848]  [<f94e0e30>] bond_create+0x6c/0x90 [bonding]
[  170.114322]  [<f94f4763>] bonding_init+0x763/0x7b1 [bonding]
[  170.114879]  [<c0401240>] do_one_initcall+0x76/0x122
[  170.115317]  [<f94f4000>] ? 0xf94f3fff
[  170.115799]  [<c0463f1e>] sys_init_module+0x1286/0x140d
[  170.116879]  [<c07c6d9f>] sysenter_do_call+0x12/0x28
[  170.117404] ---[ end trace 64e4fac3ae5fff1a ]---
[  170.117924] bond%d: Warning: failed to register to debugfs
[  170.128728] ------------[ cut here ]------------
[  170.129360] WARNING: at /home/pwp/net-next-2.6/fs/proc/generic.c:586 proc_register+0x126/0x157()
[  170.130323] Hardware name: VirtualBox
[  170.130797] proc_dir_entry 'bonding/bond%d' already registered
[  170.131315] Modules linked in: bonding(+) sunrpc ipv6 uinput microcode ppdev parport_pc parport joydev e1000 pcspkr i2c_piix4 i2c_core [last unloaded: bonding]
[  170.133731] Pid: 3457, comm: modprobe Tainted: G        W   2.6.39-rc2+ #14
[  170.134308] Call Trace:
[  170.134743]  [<c0438f3b>] warn_slowpath_common+0x6a/0x7f
[  170.135305]  [<c051a42a>] ? proc_register+0x126/0x157
[  170.135820]  [<c0438fc3>] warn_slowpath_fmt+0x2b/0x2f
[  170.137168]  [<c051a42a>] proc_register+0x126/0x157
[  170.137700]  [<c051a4dd>] proc_create_data+0x82/0x98
[  170.138174]  [<f94e6af6>] bond_create_proc_entry+0x3f/0x73 [bonding]
[  170.138745]  [<f94dd806>] bond_init+0x77/0xa5 [bonding]
[  170.139278]  [<c0721ac6>] register_netdevice+0x8c/0x1d3
[  170.139828]  [<f94e0e30>] bond_create+0x6c/0x90 [bonding]
[  170.140361]  [<f94f4763>] bonding_init+0x763/0x7b1 [bonding]
[  170.140927]  [<c0401240>] do_one_initcall+0x76/0x122
[  170.141494]  [<f94f4000>] ? 0xf94f3fff
[  170.141975]  [<c0463f1e>] sys_init_module+0x1286/0x140d
[  170.142463]  [<c07c6d9f>] sysenter_do_call+0x12/0x28
[  170.142974] ---[ end trace 64e4fac3ae5fff1b ]---
[  170.144949] bond%d: Warning: failed to register to debugfs
Signed-off-by: NWeiping Pan <panweiping3@gmail.com>
Reviewed-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0696c3a8
  7. 13 5月, 2011 1 次提交
  9. 11 5月, 2011 1 次提交
  11. 06 5月, 2011 1 次提交
  13. 03 5月, 2011 1 次提交
  15. 30 4月, 2011 1 次提交
    • D
      ethtool: Call ethtool's get/set_settings callbacks with cleaned data · 8ae6daca
      由 David Decotigny 提交于 
      This makes sure that when a driver calls the ethtool's
get/set_settings() callback of another driver, the data passed to it
is clean. This guarantees that speed_hi will be zeroed correctly if
the called callback doesn't explicitely set it: we are sure we don't
get a corrupted speed from the underlying driver. We also take care of
setting the cmd field appropriately (ETHTOOL_GSET/SSET).

This applies to dev_ethtool_get_settings(), which now makes sure it
sets up that ethtool command parameter correctly before passing it to
drivers. This also means that whoever calls dev_ethtool_get_settings()
does not have to clean the ethtool command parameter. This function
also becomes an exported symbol instead of an inline.

All drivers visible to make allyesconfig under x86_64 have been
updated.
Signed-off-by: NDavid Decotigny <decot@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8ae6daca
  17. 29 4月, 2011 1 次提交
  19. 26 4月, 2011 2 次提交
  21. 23 4月, 2011 1 次提交
  23. 13 4月, 2011 4 次提交
  25. 05 4月, 2011 1 次提交
    • T
      net: Allow no-cache copy from user on transmit · c6e1a0d1
      由 Tom Herbert 提交于 
      This patch uses __copy_from_user_nocache on transmit to bypass data
cache for a performance improvement.  skb_add_data_nocache and
skb_copy_to_page_nocache can be called by sendmsg functions to use
this feature, initial support is in tcp_sendmsg.  This functionality is
configurable per device using ethtool.

Presumably, this feature would only be useful when the driver does
not touch the data.  The feature is turned on by default if a device
indicates that it does some form of checksum offload; it is off by
default for devices that do no checksum offload or indicate no checksum
is necessary.  For the former case copy-checksum is probably done
anyway, in the latter case the device is likely loopback in which case
the no cache copy is probably not beneficial.

This patch was tested using 200 instances of netperf TCP_RR with
1400 byte request and one byte reply.  Platform is 16 core AMD x86.

No-cache copy disabled:
   672703 tps, 97.13% utilization
   50/90/99% latency:244.31 484.205 1028.41

No-cache copy enabled:
   702113 tps, 96.16% utilization,
   50/90/99% latency 238.56 467.56 956.955

Using 14000 byte request and response sizes demonstrate the
effects more dramatically:

No-cache copy disabled:
   79571 tps, 34.34 %utlization
   50/90/95% latency 1584.46 2319.59 5001.76

No-cache copy enabled:
   83856 tps, 34.81% utilization
   50/90/95% latency 2508.42 2622.62 2735.88

Note especially the effect on latency tail (95th percentile).

This seems to provide a nice performance improvement and is
consistent in the tests I ran.  Presumably, this would provide
the greatest benfits in the presence of an application workload
stressing the cache and a lot of transmit data happening.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c6e1a0d1
  27. 03 4月, 2011 1 次提交
  29. 31 3月, 2011 1 次提交
  31. 30 3月, 2011 1 次提交
  33. 28 3月, 2011 2 次提交
  35. 22 3月, 2011 1 次提交
  37. 17 3月, 2011 1 次提交
  39. 10 3月, 2011 1 次提交
    • V
      net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules · 8909c9ad
      由 Vasiliy Kulikov 提交于 
      Since a8f80e8f any process with
CAP_NET_ADMIN may load any module from /lib/modules/.  This doesn't mean
that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are
limited to /lib/modules/**.  However, CAP_NET_ADMIN capability shouldn't
allow anybody load any module not related to networking.

This patch restricts an ability of autoloading modules to netdev modules
with explicit aliases.  This fixes CVE-2011-1019.

Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior
of loading netdev modules by name (without any prefix) for processes
with CAP_SYS_MODULE to maintain the compatibility with network scripts
that use autoloading netdev modules by aliases like "eth0", "wlan0".

Currently there are only three users of the feature in the upstream
kernel: ipip, ip_gre and sit.

    root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) --
    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	fffffff800001000
    CapEff:	fffffff800001000
    CapBnd:	fffffff800001000
    root@albatros:~# modprobe xfs
    FATAL: Error inserting xfs
    (/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit
    sit: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit0
    sit0      Link encap:IPv6-in-IPv4
	      NOARP  MTU:1480  Metric:1

    root@albatros:~# lsmod | grep sit
    sit                    10457  0
    tunnel4                 2957  1 sit

For CAP_SYS_MODULE module loading is still relaxed:

    root@albatros:~# grep Cap /proc/$$/status
    CapInh:	0000000000000000
    CapPrm:	ffffffffffffffff
    CapEff:	ffffffffffffffff
    CapBnd:	ffffffffffffffff
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    xfs                   745319  0

Reference: https://lkml.org/lkml/2011/2/24/203Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NKees Cook <kees.cook@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>
      8909c9ad
  41. 08 3月, 2011 1 次提交
  43. 01 3月, 2011 1 次提交
  45. 24 2月, 2011 2 次提交
  47. 19 2月, 2011 2 次提交
  49. 18 2月, 2011 2 次提交
  51. 16 2月, 2011 2 次提交
  53. 14 2月, 2011 2 次提交
  55. 09 2月, 2011 1 次提交
    • D
      net: Fix lockdep regression caused by initializing netdev queues too early. · 8d3bdbd5
      由 David S. Miller 提交于 
      In commit aa942104 ("net: init ingress
queue") we moved the allocation and lock initialization of the queues
into alloc_netdev_mq() since register_netdevice() is way too late.

The problem is that dev->type is not setup until the setup()
callback is invoked by alloc_netdev_mq(), and the dev->type is
what determines the lockdep class to use for the locks in the
queues.

Fix this by doing the queue allocation after the setup() callback
runs.

This is safe because the setup() callback is not allowed to make any
state changes that need to be undone on error (memory allocations,
etc.).  It may, however, make state changes that are undone by
free_netdev() (such as netif_napi_add(), which is done by the
ipoib driver's setup routine).

The previous code also leaked a reference to the &init_net namespace
object on RX/TX queue allocation failures.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8d3bdbd5
  57. 03 2月, 2011 1 次提交