No properties are supported, so just use the helper and reject everything.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491815239-10685-6-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The encoder power domain is obviously tied to the encoder, so store it
in struct intel_encoder. This avoids some indirection.

v2: Rebase
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222063431.10060-3-ander.conselvan.de.oliveira@intel.com

Pass dev_priv to intel_setup_outputs() and functions called by it, since
those are all intel i915 specific functions. Also, in the majority of
the functions dev_priv is used more often than dev. In the rare cases
where there are a few calls back into drm core, a local dev variable was
added.

v2: Don't convert dev to &dev_priv->drm in intel_dsi_init. (Ville)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479910904-11005-1-git-send-email-ander.conselvan.de.oliveira@intel.com

Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-11-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

A lot of users of the {pipe,plane}_to_crtc_mapping[] will end up
casting the result to intel_crtc, so let's just store the intel_crtc
pointer in the first place.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-7-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Storing the port enum in intel_encoder makes it convenient to know the
port attached to an encoder. Moving the port information up from
intel_digital_port to intel_encoder avoids unecessary intel_digital_port
access and handles MST encoders cleanly without requiring conditional
checks for them (thanks danvet).

v2:
Renamed the port enum member from 'attached_port' to 'port' (danvet)
Fixed missing initialization of port in intel_sdvo.c (danvet)

v3:
Fixed missing initialization of port in intel_crt.c (Ville)

v4:
Storing port for DVO encoders too.
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NLyude <cpaul@redhat.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474334681-22690-3-git-send-email-dhinakaran.pandiyan@intel.com

Changing the return type from 'char' to 'enum port' in
intel_dvo_port_name() makes it easier to later move the port information to
intel_encoder. In addition, the port type conforms to what we have
elsewhere.

Removing the last conditional that handles invalid port because dvo_reg is
intialized to valid values for all DVO devices at definition.

v2: Changed return type, for real (Jani)
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NLyude <cpaul@redhat.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474334681-22690-2-git-send-email-dhinakaran.pandiyan@intel.com

If we hit the error path, we have never called drm_encoder_init() and so
have nothing to cleanup. Doing so hits a null dereference:

[   10.066261] BUG: unable to handle kernel NULL pointer dereference at 00000104
[   10.066273] IP: [<c16054b4>] mutex_lock+0xa/0x15
[   10.066287] *pde = 00000000
[   10.066295] Oops: 0002 [#1]
[   10.066302] Modules linked in: i915(+) video i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm iTCO_wdt iTCO_vendor_support ppdev evdev snd_intel8x0 snd_ac97_codec ac97_bus psmouse snd_pcm snd_timer snd pcspkr uhci_hcd ehci_pci soundcore sr_mod ehci_hcd serio_raw i2c_i801 usbcore i2c_smbus cdrom lpc_ich mfd_core rng_core e100 mii floppy parport_pc parport acpi_cpufreq button processor usb_common eeprom lm85 hwmon_vid autofs4
[   10.066378] CPU: 0 PID: 132 Comm: systemd-udevd Not tainted 4.8.0-rc3-00013-gef0e1ea8 #34
[   10.066389] Hardware name: MicroLink                               /D865GLC                        , BIOS BF86510A.86A.0077.P25.0508040031 08/04/2005
[   10.066401] task: f62db800 task.stack: f5970000
[   10.066409] EIP: 0060:[<c16054b4>] EFLAGS: 00010286 CPU: 0
[   10.066417] EIP is at mutex_lock+0xa/0x15
[   10.066424] EAX: 00000104 EBX: 00000104 ECX: 00000000 EDX: 80000000
[   10.066432] ESI: 00000000 EDI: 00000104 EBP: f5be8000 ESP: f5971b58
[   10.066439]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[   10.066446] CR0: 80050033 CR2: 00000104 CR3: 35945000 CR4: 000006d0
[   10.066453] Stack:
[   10.066459]  f503d740 f824dddf 00000000 f61170c0 f61170c0 f82371ae f850f40e 00000001
[   10.066476]  f61170c0 f5971bcc f5be8000 f9c2d401 00000001 f8236fcc 00000001 00000000
[   10.066491]  f5144014 f5be8104 00000008 f9c5267c 00000007 f61170c0 f5144400 f9c4ff00
[   10.066507] Call Trace:
[   10.066526]  [<f824dddf>] ? drm_modeset_lock_all+0x27/0xb3 [drm]
[   10.066545]  [<f82371ae>] ? drm_encoder_cleanup+0x1a/0x132 [drm]
[   10.066559]  [<f850f40e>] ? drm_atomic_helper_connector_reset+0x3f/0x5c [drm_kms_helper]
[   10.066644]  [<f9c2d401>] ? intel_dvo_init+0x569/0x788 [i915]
[   10.066663]  [<f8236fcc>] ? drm_encoder_init+0x43/0x20b [drm]
[   10.066734]  [<f9bf1fce>] ? intel_modeset_init+0x1436/0x17dd [i915]
[   10.066791]  [<f9b37636>] ? i915_driver_load+0x85a/0x15d3 [i915]
[   10.066846]  [<f9b3603d>] ? i915_driver_open+0x5/0x5 [i915]
[   10.066857]  [<c14af4d0>] ? firmware_map_add_entry.part.2+0xc/0xc
[   10.066868]  [<c1343daf>] ? pci_device_probe+0x8e/0x11c
[   10.066878]  [<c140cec8>] ? driver_probe_device+0x1db/0x62e
[   10.066888]  [<c120c010>] ? kernfs_new_node+0x29/0x9c
[   10.066897]  [<c13438e0>] ? pci_match_device+0xd9/0x161
[   10.066905]  [<c120c48b>] ? kernfs_create_dir_ns+0x42/0x88
[   10.066914]  [<c140d401>] ? __driver_attach+0xe6/0x11b
[   10.066924]  [<c1303b13>] ? kobject_add_internal+0x1bb/0x44f
[   10.066933]  [<c140d31b>] ? driver_probe_device+0x62e/0x62e
[   10.066941]  [<c140a2d2>] ? bus_for_each_dev+0x46/0x7f
[   10.066950]  [<c140c502>] ? driver_attach+0x1a/0x34
[   10.066958]  [<c140d31b>] ? driver_probe_device+0x62e/0x62e
[   10.066966]  [<c140b758>] ? bus_add_driver+0x217/0x32a
[   10.066975]  [<f8403000>] ? 0xf8403000
[   10.066982]  [<c140de27>] ? driver_register+0x5f/0x108
[   10.066991]  [<c1000493>] ? do_one_initcall+0x49/0x1f6
[   10.067000]  [<c1082299>] ? pick_next_task_fair+0x14b/0x2a3
[   10.067008]  [<c1603c8d>] ? __schedule+0x15c/0x4fe
[   10.067016]  [<c1604104>] ? preempt_schedule_common+0x19/0x3c
[   10.067027]  [<c11051de>] ? do_init_module+0x17/0x230
[   10.067035]  [<c1604139>] ? _cond_resched+0x12/0x1a
[   10.067044]  [<c116f9aa>] ? kmem_cache_alloc+0x8f/0x11f
[   10.067052]  [<c11051de>] ? do_init_module+0x17/0x230
[   10.067060]  [<c11703dd>] ? kfree+0x137/0x203
[   10.067068]  [<c110523d>] ? do_init_module+0x76/0x230
[   10.067078]  [<c10cadf3>] ? load_module+0x2a39/0x333f
[   10.067087]  [<c10cb8b2>] ? SyS_finit_module+0x96/0xd5
[   10.067096]  [<c1132231>] ? vm_mmap_pgoff+0x79/0xa0
[   10.067105]  [<c1001e96>] ? do_fast_syscall_32+0xb5/0x1b0
[   10.067114]  [<c16086a6>] ? sysenter_past_esp+0x47/0x75
[   10.067121] Code: c8 f7 76 c1 e8 8e cc d2 ff e9 45 fe ff ff 66 90 66 90 66 90 66 90 90 ff 00 7f 05 e8 4e 0c 00 00 c3 53 89 c3 e8 75 ec ff ff 89 d8 <ff> 08 79 05 e8 fa 0a 00 00 5b c3 53 89 c3 85 c0 74 1b 8b 03 83
[   10.067180] EIP: [<c16054b4>] mutex_lock+0xa/0x15 SS:ESP 0068:f5971b58
[   10.067190] CR2: 0000000000000104
[   10.067222] ---[ end trace 049f1f09da45a856 ]---
Reported-by: NMeelis Roos <mroos@linux.ee>
Fixes: 580d8ed5 ("drm/i915: Give encoders useful names")
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160823092558.14931-1-chris@chris-wilson.co.uk
(cherry picked from commit 8f76aa0e)

If we hit the error path, we have never called drm_encoder_init() and so
have nothing to cleanup. Doing so hits a null dereference:

[   10.066261] BUG: unable to handle kernel NULL pointer dereference at 00000104
[   10.066273] IP: [<c16054b4>] mutex_lock+0xa/0x15
[   10.066287] *pde = 00000000
[   10.066295] Oops: 0002 [#1]
[   10.066302] Modules linked in: i915(+) video i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm iTCO_wdt iTCO_vendor_support ppdev evdev snd_intel8x0 snd_ac97_codec ac97_bus psmouse snd_pcm snd_timer snd pcspkr uhci_hcd ehci_pci soundcore sr_mod ehci_hcd serio_raw i2c_i801 usbcore i2c_smbus cdrom lpc_ich mfd_core rng_core e100 mii floppy parport_pc parport acpi_cpufreq button processor usb_common eeprom lm85 hwmon_vid autofs4
[   10.066378] CPU: 0 PID: 132 Comm: systemd-udevd Not tainted 4.8.0-rc3-00013-gef0e1ea8 #34
[   10.066389] Hardware name: MicroLink                               /D865GLC                        , BIOS BF86510A.86A.0077.P25.0508040031 08/04/2005
[   10.066401] task: f62db800 task.stack: f5970000
[   10.066409] EIP: 0060:[<c16054b4>] EFLAGS: 00010286 CPU: 0
[   10.066417] EIP is at mutex_lock+0xa/0x15
[   10.066424] EAX: 00000104 EBX: 00000104 ECX: 00000000 EDX: 80000000
[   10.066432] ESI: 00000000 EDI: 00000104 EBP: f5be8000 ESP: f5971b58
[   10.066439]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[   10.066446] CR0: 80050033 CR2: 00000104 CR3: 35945000 CR4: 000006d0
[   10.066453] Stack:
[   10.066459]  f503d740 f824dddf 00000000 f61170c0 f61170c0 f82371ae f850f40e 00000001
[   10.066476]  f61170c0 f5971bcc f5be8000 f9c2d401 00000001 f8236fcc 00000001 00000000
[   10.066491]  f5144014 f5be8104 00000008 f9c5267c 00000007 f61170c0 f5144400 f9c4ff00
[   10.066507] Call Trace:
[   10.066526]  [<f824dddf>] ? drm_modeset_lock_all+0x27/0xb3 [drm]
[   10.066545]  [<f82371ae>] ? drm_encoder_cleanup+0x1a/0x132 [drm]
[   10.066559]  [<f850f40e>] ? drm_atomic_helper_connector_reset+0x3f/0x5c [drm_kms_helper]
[   10.066644]  [<f9c2d401>] ? intel_dvo_init+0x569/0x788 [i915]
[   10.066663]  [<f8236fcc>] ? drm_encoder_init+0x43/0x20b [drm]
[   10.066734]  [<f9bf1fce>] ? intel_modeset_init+0x1436/0x17dd [i915]
[   10.066791]  [<f9b37636>] ? i915_driver_load+0x85a/0x15d3 [i915]
[   10.066846]  [<f9b3603d>] ? i915_driver_open+0x5/0x5 [i915]
[   10.066857]  [<c14af4d0>] ? firmware_map_add_entry.part.2+0xc/0xc
[   10.066868]  [<c1343daf>] ? pci_device_probe+0x8e/0x11c
[   10.066878]  [<c140cec8>] ? driver_probe_device+0x1db/0x62e
[   10.066888]  [<c120c010>] ? kernfs_new_node+0x29/0x9c
[   10.066897]  [<c13438e0>] ? pci_match_device+0xd9/0x161
[   10.066905]  [<c120c48b>] ? kernfs_create_dir_ns+0x42/0x88
[   10.066914]  [<c140d401>] ? __driver_attach+0xe6/0x11b
[   10.066924]  [<c1303b13>] ? kobject_add_internal+0x1bb/0x44f
[   10.066933]  [<c140d31b>] ? driver_probe_device+0x62e/0x62e
[   10.066941]  [<c140a2d2>] ? bus_for_each_dev+0x46/0x7f
[   10.066950]  [<c140c502>] ? driver_attach+0x1a/0x34
[   10.066958]  [<c140d31b>] ? driver_probe_device+0x62e/0x62e
[   10.066966]  [<c140b758>] ? bus_add_driver+0x217/0x32a
[   10.066975]  [<f8403000>] ? 0xf8403000
[   10.066982]  [<c140de27>] ? driver_register+0x5f/0x108
[   10.066991]  [<c1000493>] ? do_one_initcall+0x49/0x1f6
[   10.067000]  [<c1082299>] ? pick_next_task_fair+0x14b/0x2a3
[   10.067008]  [<c1603c8d>] ? __schedule+0x15c/0x4fe
[   10.067016]  [<c1604104>] ? preempt_schedule_common+0x19/0x3c
[   10.067027]  [<c11051de>] ? do_init_module+0x17/0x230
[   10.067035]  [<c1604139>] ? _cond_resched+0x12/0x1a
[   10.067044]  [<c116f9aa>] ? kmem_cache_alloc+0x8f/0x11f
[   10.067052]  [<c11051de>] ? do_init_module+0x17/0x230
[   10.067060]  [<c11703dd>] ? kfree+0x137/0x203
[   10.067068]  [<c110523d>] ? do_init_module+0x76/0x230
[   10.067078]  [<c10cadf3>] ? load_module+0x2a39/0x333f
[   10.067087]  [<c10cb8b2>] ? SyS_finit_module+0x96/0xd5
[   10.067096]  [<c1132231>] ? vm_mmap_pgoff+0x79/0xa0
[   10.067105]  [<c1001e96>] ? do_fast_syscall_32+0xb5/0x1b0
[   10.067114]  [<c16086a6>] ? sysenter_past_esp+0x47/0x75
[   10.067121] Code: c8 f7 76 c1 e8 8e cc d2 ff e9 45 fe ff ff 66 90 66 90 66 90 66 90 90 ff 00 7f 05 e8 4e 0c 00 00 c3 53 89 c3 e8 75 ec ff ff 89 d8 <ff> 08 79 05 e8 fa 0a 00 00 5b c3 53 89 c3 85 c0 74 1b 8b 03 83
[   10.067180] EIP: [<c16054b4>] mutex_lock+0xa/0x15 SS:ESP 0068:f5971b58
[   10.067190] CR2: 0000000000000104
[   10.067222] ---[ end trace 049f1f09da45a856 ]---
Reported-by: NMeelis Roos <mroos@linux.ee>
Fixes: 580d8ed5 ("drm/i915: Give encoders useful names")
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160823092558.14931-1-chris@chris-wilson.co.uk

Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-10-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some places iterate over connector_state to find the right
connector, pass it along as argument.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-7-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is mostly code churn, with exception of a few places:
- intel_display.c has changes in intel_sanitize_encoder
- intel_ddi.c has intel_ddi_fdi_disable calling intel_ddi_post_disable,
  and required a function change. Also affects intel_display.c
- intel_dp_mst.c passes a NULL crtc_state and conn_state to
  intel_ddi_post_disable for shutting down the real encoder.

  If we would pass conn_state, then conn_state->connector !=
  intel_dig_port->connector and conn_state->best_encoder !=
  to_intel_encoder(intel_dig_port).

  We also shouldn't pass crtc_state, because in that case the
  disabling sequence may potentially be different depending on
  which crtc is disabled last. Nice way to introduce bugs.

No other functional changes are done, diff stat is already huge.
Each encoder type will need to be fixed to use the atomic states
separately.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-6-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since we now subclass struct drm_device, we can save pointer dances by
noting the equivalence of struct drm_device and struct drm_i915_private,
i.e. by using to_i915().

   text    data     bss     dec     hex filename
1073824    4562     416 1078802  107612 drivers/gpu/drm/i915/i915.ko
1068976    4562     416 1073954  106322 drivers/gpu/drm/i915/i915.ko

Created by the coccinelle script:

@@
expression E;
identifier p;
@@
- struct drm_i915_private *p = E->dev_private;
+ struct drm_i915_private *p = to_i915(E);
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467628477-25379-1-git-send-email-chris@chris-wilson.co.uk

Defer connector registration from during construction to the driver
registration phase. This is important for ordering the action correctly,
e.g. not using debugfs before it is ready.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466773227-7994-4-git-send-email-chris@chris-wilson.co.uk

Currently the backlight is being registered in the load phase (before
the display and its objects are registered). Move the backlight
registration into the analogous phase by performing it from the
connector registration, just after its creation.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466773227-7994-3-git-send-email-chris@chris-wilson.co.uk

We now have a connector->func that serves the same purpose as our own
intel_connector->unregister vfunc allowing us to unwrap ourselves and
use drm_connector_register() (and friends) as the central function.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466160034-12173-2-git-send-email-chris@chris-wilson.co.uk

For all outputs except dp_mst, we have a 1:1 relationship between
connectors and encoders and the driver is relying on the atomic helpers:
we can drop the custom ->best_encoder() implementation and let the core
call drm_atomic_helper_best_encoder() for us.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-7-git-send-email-boris.brezillon@free-electrons.com

Rather than let the core generate usless encoder names, let's pass in
something that actually identifies the piece of hardware we're dealing
with.

v2: Use 'DSI %c' instead of 'MIPI %c' for DSI encoders (Jani)
v3: Use port_name() in DSI code since we have it
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464371966-15190-7-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.

@@
identifier dev, encoder, funcs;
@@
 int drm_encoder_init(struct drm_device *dev,
                      struct drm_encoder *encoder,
                      const struct drm_encoder_funcs *funcs,
                      int encoder_type
+                     ,const char *name, int DOTDOTDOT
                      )
{ ... }

@@
identifier dev, encoder, funcs;
@@
 int drm_encoder_init(struct drm_device *dev,
                      struct drm_encoder *encoder,
                      const struct drm_encoder_funcs *funcs,
                      int encoder_type
+                     ,const char *name, int DOTDOTDOT
                      );

@@
expression E1, E2, E3, E4;
@@
 drm_encoder_init(E1, E2, E3, E4
+                 ,NULL
                  )

v2: Add ', or NULL...' to @name kernel doc (Jani)
    Annotate the function with __printf() attribute (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com

Make I915_READ and I915_WRITE more type safe by wrapping the register
offset in a struct. This should eliminate most of the fumbles we've had
with misplaced parens.

This only takes care of normal mmio registers. We could extend the idea
to other register types and define each with its own struct. That way
you wouldn't be able to accidentally pass the wrong thing to a specific
register access function.

The gpio_reg setup is probably the ugliest thing left. But I figure I'd
just leave it for now, and wait for some divine inspiration to strike
before making it nice.

As for the generated code, it's actually a bit better sometimes. Eg.
looking at i915_irq_handler(), we can see the following change:
  lea    0x70024(%rdx,%rax,1),%r9d
  mov    $0x1,%edx
- movslq %r9d,%r9
- mov    %r9,%rsi
- mov    %r9,-0x58(%rbp)
- callq  *0xd8(%rbx)
+ mov    %r9d,%esi
+ mov    %r9d,-0x48(%rbp)
 callq  *0xd8(%rbx)

So previously gcc thought the register offset might be signed and
decided to sign extend it, just in case. The rest appears to be
mostly just minor shuffling of instructions.

v2: i915_mmio_reg_{offset,equal,valid}() helpers added
    s/_REG/_MMIO/ in the register defines
    mo more switch statements left to worry about
    ring_emit stuff got sorted in a prep patch
    cmd parser, lrc context and w/a batch buildup also in prep patch
    vgpu stuff cleaned up and moved to a prep patch
    all other unrelated changes split out
v3: Rebased due to BXT DSI/BLC, MOCS, etc.
v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com

Store the DVO SRCDIM register offset alongside the DVO control register
offset in intel_dvo_device. This gets rid of the switch statement whose
case values are the DVO control register offsets. Such a construct would
cause problems for register type safety.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1446672017-24497-12-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Make adjusted_mode const whereever we don't have to modify it. This only
covers cases when we have a local adjusted_mode variable, and doesn't
make any difference for cases where we just dereference
pipe_config->adjusted_mode.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The adjustead_mode crtc_ timings are what we will program into the hardware,
so it's those timings we should be looking practically everywhere.

The normal and crtc_ timings should differ only when stere doubling is
used. In that case the normal timings are the orignal non-doubled
timigns, and crtc_ timings are the doubled timings used by the hardware.

The only case where we continue to look at the normal timings is when we
pass the adjusted_mode to drm_match_{cea,hdmi}_mode() to find the VIC.
drm_edid keeps the modes aronund in the non-double form only, so it
needs the non-double timings to match against.

Done with sed
's/adjusted_mode->\([vhVH]\)/adjusted_mode->crtc_\1/g'
's/adjusted_mode->clock/adjusted_mode->crtc_clock/g'
with a manual s/VDisplay/vdisplay/ within the comment in intel_dvo.c

v2: Update due to intel_dsi.c changes
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replace intel_dvo->panel_fixed_mode with the appropriate intel_panel
stuff. Now all connectors that have a fixed mode use intel_panel.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It is possible the we request to have a mode that has
higher pixel clock than our HW can support. This patch
checks if requested pixel clock is lower than the one
supported by the HW. The requested mode is discarded
if we cannot support the requested pixel clock.

This patch applies to DVO.

V2:
- removed computation for max pixel clock

V3:
- cleanup by removing unnecessary lines

V4:
- clock check against max dotclock moved inside 'if (fixed_mode)'

V5:
- dot clock check against fixed_mode clock when available
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is now done completely atomically.
Keep connectors_active for now, but make it mirror crtc_state->active.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

First step in removing dpms and validating atomic state.

There can still be a mismatch in the connector state because the dpms
callbacks are still used, but this can not happen immediately after a modeset.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is required to properly handle failing dpms calls.
When making a wait in i915 interruptible, I've noticed
that the dpms sequence could fail with -ERESTARTSYS because
it was waiting interruptibly for flips. So from now on
allow drivers to fail in their connector dpms callback.

Encoder and crtc dpms callbacks are unaffected.

Changes since v1:
- Update kerneldoc for the drm helper functions.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Resolve conflicts due to different merge order.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_dvo.c: In function ‘intel_dvo_init’:
drivers/gpu/drm/i915/intel_dvo.c:531:8: warning: array subscript is above array bounds [-Warray-bounds]

gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.7/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Debian 4.7.2-5'
--with-bugurl=file:///usr/share/doc/gcc-4.7/README.Bugs
--enable-languages=c,c++,go,fortran,objc,obj-c++ --prefix=/usr
--program-suffix=-4.7 --enable-shared --enable-linker-build-id
--with-system-zlib --libexecdir=/usr/lib --without-included-gettext
--enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.7
--libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu
--enable-libstdcxx-debug --enable-libstdcxx-time=yes
--enable-gnu-unique-object --enable-plugin --enable-objc-gc
--with-arch-32=i586 --with-tune=generic --enable-checking=release
--build=x86_64-linux-gnu --host=x86_64-linux-gnu
--target=x86_64-linux-gnu
Thread model: posix

and

gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/i686-linux-gnu/4.8/lto-wrapper
Target: i686-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu
4.8.2-19ubuntu1' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs
--enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr
--program-suffix=-4.8 --enable-shared --enable-linker-build-id
--libexecdir=/usr/lib --without-included-gettext --enable-threads=posix
--with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib
--enable-nls --with-sysroot=/ --enable-clocale=gnu
--enable-libstdcxx-debug --enable-libstdcxx-time=yes
--enable-gnu-unique-object --disable-libmudflap --enable-plugin
--with-system-zlib --disable-browser-plugin --enable-java-awt=gtk
--enable-gtk-cairo
--with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-i386/jre
--enable-java-home
--with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-i386
--with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-i386
--with-arch-directory=i386
--with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
--enable-targets=all --enable-multiarch --disable-werror
--with-arch-32=i686 --with-multilib-list=m32,m64,mx32
--with-tune=generic --enable-checking=release --build=i686-linux-gnu
--host=i686-linux-gnu --target=i686-linux-gnu
Thread model: posix
gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDave Gordon <david.s.gordon@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Connector states were being allocated in intel_setup_outputs() in loop
over all connectors. That meant hot-added connectors would have a NULL
state. Since the change to use a struct drm_atomic_state for the legacy
modeset, connector states are necessary for the i915 driver to function
properly, so that would lead to oopses.

Broken by

commit 944b0c76
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Fri Mar 20 16:18:07 2015 +0200

    drm/i915: Copy the staged connector config to the legacy atomic state

v2: Fix test for intel_connector_init() success in lvds and sdvo (PRTS)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reported-and-tested-by: NNicolas Kalkhof <nkalkhof@web.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Connector states were being allocated in intel_setup_outputs() in loop
over all connectors. That meant hot-added connectors would have a NULL
state. Since the change to use a struct drm_atomic_state for the legacy
modeset, connector states are necessary for the i915 driver to function
properly, so that would lead to oopses.

v2: Fix test for intel_connector_init() success in lvds and sdvo (PRTS)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reported-and-tested-by: NNicolas Kalkhof <nkalkhof@web.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This will be helpful for adding future platforms. It is better to keep
the information in the single point of truth (the table) instead of
duplicating it into the validity function.

While at it, add dev_priv parameter to the function, also to prepare for
adding future platform support.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Rename intel_gmbus_is_port_valid to intel_gmbus_is_valid_pin, and rename
port parameters to pin as well. This matches usage all around, as
usually a pin is passed to the validity check function. No functional
changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The specs refer to pin pairs. Start moving towards using pin rather than
port all around to avoid confusion. No functional changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

ns2501 requires the DVO 2x clock before it will respond to i2c access,
so make sure the clock is enabled when we try to initialize the encoder.

Fixes the display getting lost on module reload on my Fujitsu/Siemens
Lifebook S6010.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So that we can add connector states to the drm_atomic_state used in the
legacy modeset.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Even though we only support atomic plane updates at the moment, we still
need to add an .atomic_get_property() entrypoint for connectors before
we allow the driver to flip on the DRIVER_ATOMIC bit.  As soon as that
bit gets set, the DRM core will start adding atomic connector properties
(in addition to the plane properties we care about at the moment), so we
need to be able to handle the new way the DRM core will interact with
us.

For simplicity, we just lookup driver-specific connector properties in
the usual shadow array maintained by the core.  Once we get real atomic
modeset support for crtc's and planes, this code should be re-written to
pull the data out of crtc/connector state structures.

v2: Fix intel_dvo and intel_dsi that I missed on the first pass (Ander)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We want to enable/test plane updates via the atomic interface, but as
soon as we flip DRIVER_ATOMIC on, the DRM core will take some atomic
codepaths to lookup properties during drmModeGetConnector() and some of
those codepaths unconditionally dereference connector->state
(specifically when looking up the CRTC ID property in
drm_atomic_connector_get_property()).  Create a dummy connector state
for each connector at init time to ensure the DRM core doesn't try to
dereference a NULL connector->state.  The actual connector properties
will never be updated or contain useful information, but since we're
doing this specifically for testing/debug of the plane operations (and
only when a specific kernel module option is given), that shouldn't
really matter.

Once we start creating connector states, the DRM core will want to be
able to clean them up for us.  We also need to hook up the destruction
entrypoint to the core's helper.

v2: Squash in the patch to set the state destruction hook (Ander & Bob)

v3: Only create dummy connector states when we're actually faking
    atomic support.  (Ander)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To match the semantics of drm_crtc->state, which this will eventually
become. The allocation of the memory for config will be fixed in a
followup patch. By adding the extra _config field to intel_crtc it was
possible to generate this entire patch with the cocci script below.

@@ @@
struct intel_crtc {
...
-struct intel_crtc_state config;
+struct intel_crtc_state _config;
+struct intel_crtc_state *config;
...
}
@@ struct intel_crtc *crtc; @@
-memset(&crtc->config, 0, sizeof(crtc->config));
+memset(crtc->config, 0, sizeof(*crtc->config));
@@ @@
__intel_set_mode(...) {
<...
-to_intel_crtc(crtc)->config = *pipe_config;
+(*(to_intel_crtc(crtc)->config)) = *pipe_config;
...>
}
@@ @@
intel_crtc_init(...) {
...
WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
+intel_crtc->config = &intel_crtc->_config;
return;
...
}
@@ struct intel_crtc *crtc; @@
-&crtc->config
+crtc->config
@@ struct intel_crtc *crtc; identifier member; @@
-crtc->config.member
+crtc->config->member
@@ expression E; @@
-&(to_intel_crtc(E)->config)
+to_intel_crtc(E)->config
@@ expression E; identifier member; @@
-to_intel_crtc(E)->config.member
+to_intel_crtc(E)->config->member

v2: Clarify manual changes by splitting them into another patch. (Matt)
    Improve cocci script to generate even more of the changes. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And get rid of the duplicate mode structures. This patch was generated
with the following semantic patch:

@@ @@
struct intel_crtc_state {
+struct drm_crtc_state base;
+
...
-struct drm_display_mode requested_mode;
-struct drm_display_mode adjusted_mode;
...
}
@@ struct intel_crtc_state *state; @@
-state->adjusted_mode
+state->base.adjusted_mode
@@ struct intel_crtc_state *state; @@
-state->requested_mode
+state->base.mode
@@ struct intel_crtc_state state; @@
-state.adjusted_mode
+state.base.adjusted_mode
@@ struct intel_crtc_state state; @@
-state.requested_mode
+state.base.mode
@@ struct drm_crtc *crtc; @@
-to_intel_crtc(crtc)->config.adjusted_mode
+to_intel_crtc(crtc)->config.base.adjusted_mode
@@ identifier member; expression E; @@
-PIPE_CONF_CHECK_FLAGS(adjusted_mode.member, E);
+PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.member, E);
@@ identifier member; @@
-PIPE_CONF_CHECK_I(adjusted_mode.member);
+PIPE_CONF_CHECK_I(base.adjusted_mode.member);
@@ identifier member; @@
-PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.member);
+PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.member);

v2: Completely generate the patch with cocci. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>