Add register definitions for DA9063 AD (0x3) silicon variant ID
the ability to choose the silicon variant at run-time using regmap
configuration. This patch also adds RTC support for the AD silicon
changes.

It adds both BB and AD support as regmap ranges and then makes the
distinction between the two tables at run-time. This allows both AD
and BB silicon variants to be supported at the same time.
Suggested-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NOpensource [Steve Twiss] <stwiss.opensource@diasemi.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The extcon driver should be able to get its regulator against rather
than against the main arizona device, we must add a supply mapping
allowing the regulator to be located. This patch does so.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The previous update adding MICVDD to the regulator mappings:

mfd: arizona: Add MICVDD to mapped regulators

Only added the mapping for wm5102 and wm5110 but wm8997 also has a
MICVDD supply that needs to be mapped back to the main Arizona device.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Extinguishes:

../drivers/mfd/max77686.c: In function ‘max77686_i2c_probe’:
../drivers/mfd/max77686.c:254:20:
	warning: cast from pointer to integer of different size
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Maxim MAX77802 is a power management chip that contains 10 high
efficiency Buck regulators, 32 Low-dropout (LDO) regulators used
to power up application processors and peripherals, a 2-channel
32kHz clock outputs, a Real-Time-Clock (RTC) and a I2C interface
to program the individual regulators, clocks outputs and the RTC.

This patch adds support for MAX77802 to the MAX77686 driver and is
based on a driver added to the Chrome OS kernel 3.8 by Simon Glass.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch introduces the use of devm_kzalloc instead of the
corresponding unmanaged version and does away with the kfrees in the
probe and remove functions. Also, a label is done away with.
Signed-off-by: NHimangi Saraogi <himangi774@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: line over 80 characters
+       { 0x00000068, 0x01FF },    /* R104   - Always On Triggers Sequence Select 3 */

WARNING: line over 80 characters
+       { 0x00000069, 0x01FF },    /* R105   - Always On Triggers Sequence Select 4 */

WARNING: line over 80 characters
+       { 0x0000006A, 0x01FF },    /* R106   - Always On Triggers Sequence Select 5 */

WARNING: line over 80 characters
+       { 0x0000006B, 0x01FF },    /* R107   - Always On Triggers Sequence Select 6 */
Signed-off-by: NLee Jones <lee.jones@linaro.org>

WARNING: line over 80 characters
+module_param_string(force_device_id, force_device_id, sizeof(force_device_id), 0);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(1);

WARNING: __initdata should be placed after kempld_dmi_table[]
+static struct dmi_system_id __initdata kempld_dmi_table[] = {

WARNING: line over 80 characters
+               for (id = kempld_dmi_table; id->matches[0].slot != DMI_NONE; id++)

total: 0 errors, 4 warnings, 771 lines checked

This is part of an effort to clean-up the MFD subsystem.
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

ERROR: space required before the open parenthesis '('
+                       if(!micro->msg)

WARNING: unnecessary whitespace before a quoted newline
+                       dev_dbg(micro->dev, "key message ignored, no handle \n");

WARNING: unnecessary whitespace before a quoted newline
+                       dev_dbg(micro->dev, "touchscreen message ignored, no handle \n");

WARNING: space prohibited before semicolon
+               rx->id = (ch & 0xf0) >> 4 ;

total: 1 errors, 3 warnings, 482 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: line over 80 characters
+                        struct si476x_rsq_status_args *rsqargs,

WARNING: line over 80 characters
+                        struct si476x_rsq_status_report *report)

WARNING: Unnecessary space before function pointer arguments
+       int (*power_up) (struct si476x_core *,

WARNING: Unnecessary space before function pointer arguments
+       int (*power_down) (struct si476x_core *,

total: 0 errors, 4 warnings, 1555 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: braces {} are not necessary for single statement blocks
+       if (!iomem) {
+               return -EINVAL;
+       }

WARNING: sizeof *tc6387xb should be sizeof(*tc6387xb)
+       tc6387xb = kzalloc(sizeof *tc6387xb, GFP_KERNEL);

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
+       printk(KERN_INFO "Toshiba tc6387xb initialised\n");

total: 0 errors, 3 warnings, 242 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: please, no space before tabs
+^IRSV_INTR_OFFSET,  ^I/* Bit 12^IReserved^I^I*/$

WARNING: Missing a blank line after declarations
+       u8 unmask_value;
+       ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value,

WARNING: Missing a blank line after declarations
+       u8 mask_value;
+       ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value,

total: 0 errors, 3 warnings, 484 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: please, no spaces at the start of a line
+       { "wm8350", 0 },$

WARNING: please, no spaces at the start of a line
+       { "wm8351", 0 },$

WARNING: please, no spaces at the start of a line
+       { "wm8352", 0 },$

WARNING: please, no spaces at the start of a line
+       { }$

total: 0 errors, 4 warnings, 93 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: Missing a blank line after declarations
+       struct max8925_chip *chip = irq_data_get_irq_chip_data(data);
+       max8925_irqs[data->irq - chip->irq_base].enable

WARNING: Missing a blank line after declarations
+       struct max8925_chip *chip = irq_data_get_irq_chip_data(data);
+       max8925_irqs[data->irq - chip->irq_base].enable = 0;

total: 0 errors, 2 warnings, 927 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: Prefer pr_warn(... to pr_warning(...
+               pr_warning("twl4030: I2C error %d reading PIH ISR\n", ret);

WARNING: sizeof buf should be sizeof(buf)
+       memset(buf, 0xff, sizeof buf);

WARNING: sizeof *agent should be sizeof(*agent)
+       agent = kzalloc(sizeof *agent, GFP_KERNEL);
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: Missing a blank line after declarations
+       struct lp8788_irq_data *irqd = irq_data_get_irq_chip_data(data);
+       irqd->enabled[data->hwirq] = 1;

WARNING: Missing a blank line after declarations
+       struct lp8788_irq_data *irqd = irq_data_get_irq_chip_data(data);
+       irqd->enabled[data->hwirq] = 0;

total: 0 errors, 2 warnings, 198 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: sizeof t should be sizeof(t)
+       memset(&t, 0, sizeof t);

WARNING: void function return statements are not generally useful
+       return;
+}

total: 0 errors, 2 warnings, 542 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

ERROR: space required after that ',' (ctx:VxO)
+                                 0, &twl6040_irq_chip,&twl6040->irq_data);
                                                      ^

ERROR: space required before that '&' (ctx:OxV)
+                                 0, &twl6040_irq_chip,&twl6040->irq_data);
                                                       ^

total: 2 errors, 0 warnings, 816 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: Missing a blank line after declarations
+               const struct of_device_id *match;
+               match = of_match_node(sec_dt_match, i2c->dev.of_node);

total: 0 errors, 1 warnings, 494 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

ERROR: space required after that ',' (ctx:VxV)
+#define MSP_GPIO(bit,reg)      ((DM355EVM_MSP_ ## reg) << 3 | (bit))
                     ^

total: 1 errors, 0 warnings, 437 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: line over 80 characters
+       wm8350->irq_base = irq_alloc_descs(irq_base, 0, ARRAY_SIZE(wm8350_irqs), 0);

total: 0 errors, 1 warnings, 552 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: Missing a blank line after declarations
+       unsigned long flags;
+       spin_lock_irqsave(&mcp->lock, flags);

total: 0 errors, 1 warnings, 238 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

WARNING: Missing a blank line after declarations
+       int ret;
+       ret = i2c_add_driver(&max8925_driver);

total: 0 errors, 1 warnings, 275 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is part of an effort to clean-up the MFD subsystem.

+WARNING: line over 80 characters
+                                      &max77686_rtc_regmap_config);

total: 0 errors, 1 warnings, 299 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

There is no need to print out-of-memory errors since this is already
done by the memory management subsystem which even calls dump_stack().
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Error checking across the driver is mostly consistent besides
a few exceptions, so change these exceptions for consistency.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

When platform data is not found an -EIO (I/O error) code is returned.
This doesn't seem to be the correct error so better return -EINVAL
(Invalid argument) which is what most drivers do in this case.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The function max77802_i2c_parse_dt_pdata() should only be called
if there isn't already platform data for the device.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

When the CONFIG_OF option was not enabled, a dummy function
max77686_i2c_parse_dt_pdata() was defined since this is called
unconditionally on probe(). Just always define the real function
and conditionally call it if CONFIG_OF is enabled instead.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The driver doesn't have PM operations defined so add a suspend
and resume function handlers to allow the PMIC IRQ to wakeup
the system when it is put into a sleep state.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

By using the generic IRQ support in the Register map API, it
is possible to get rid max77686-irq.c and simplify the code.
Suggested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Tested-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The Allwinner A23 SoC has a PRCM unit like the previous A31 SoC.
The differences are the AR100 clock can no longer be modified,
the APB0 clock has different divisors, and some clock gates are
gone.

This patch adds a compatible with a modified subdevice list for
the A23.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

When checkpatch is run on ab8500-debugfs.c it screamed blue murder!

This patch fixes up all of the errors/warnings reported:

WARNING: line over 80 characters
+		err = seq_printf(s, "  [0x%02X/0x%02X]: 0x%02X\n",

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
+		printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n",

WARNING: Prefer seq_puts to seq_printf
+	seq_printf(s, AB8500_NAME_STRING " register values:\n");

WARNING: Prefer seq_puts to seq_printf
+	seq_printf(s, AB8500_NAME_STRING " register values:\n");

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
+	printk(KERN_INFO"ab8500 register values:\n");

WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
+		printk(KERN_INFO" bank 0x%02X:\n", i);

WARNING: externs should be avoided in .c files
+extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);

WARNING: quoted string split across lines
+	pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" "
+		"for crash analyze.\n");

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
+		printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__);

WARNING: Prefer seq_puts to seq_printf
+	seq_printf(s, "name: number:  number of: wake:\n");

WARNING: line over 80 characters
+	return single_open(file, ab8500_print_modem_registers, inode->i_private);

WARNING: line over 80 characters
+	return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private);

WARNING: line over 80 characters
+	return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private);

WARNING: line over 80 characters
+	vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS,

WARNING: line over 80 characters
+static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p)

WARNING: line over 80 characters
+static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = {

WARNING: line over 80 characters
+		vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h);

WARNING: quoted string split across lines
+		dev_err(dev, "debugfs error input: "
+			"should be egal to 1, 4, 8 or 16\n");

WARNING: Missing a blank line after declarations
+	char *s = b;
+	if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) {

WARNING: simple_strtoul is obsolete, use kstrtoul instead
+			loc.mask = simple_strtoul(b, &b, 0);

WARNING: simple_strtol is obsolete, use kstrtol instead
+			loc.shift = simple_strtol(b, &b, 0);

WARNING: simple_strtoul is obsolete, use kstrtoul instead
+	loc.bank = simple_strtoul(b, &b, 0);

WARNING: simple_strtoul is obsolete, use kstrtoul instead
+	loc.addr = simple_strtoul(b, &b, 0);

WARNING: simple_strtoul is obsolete, use kstrtoul instead
+		val = simple_strtoul(b, &b, 0);

WARNING: quoted string split across lines
+	pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d"
+			"value=0x%X\n", (write) ? "write" : "read",

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
+		printk(KERN_ERR "sysfs_create_file failed %d\n", err);

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
+		printk(KERN_ERR "request_threaded_irq failed %d, %lu\n",

ERROR: code indent should use tabs where possible
+                       err, user_val);$

WARNING: please, no spaces at the start of a line
+                       err, user_val);$

WARNING: Missing a blank line after declarations
+	struct resource *res;
+	debug_bank = AB8500_MISC;

ERROR: space required after that ',' (ctx:VxV)
+		sizeof(*dev_attr)*num_irqs,GFP_KERNEL);
 		                          ^

WARNING: return of an errno should typically be -ve (return -ENXIO)
+		return ENXIO;

WARNING: line over 80 characters
+	file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+	file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+		file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+			ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops);

WARNING: line over 80 characters
+		file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+		file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP),

WARNING: line over 80 characters
+			ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops);

total: 2 errors, 44 warnings, 3230 lines checked
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add details of following properties which are used on driver but
not documented on DT binding document.
- ams,enable-internal-int-pullup
- ams,enable-internal-i2c-pullup
Reported-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

We know how many bytes the EC should be sending us (which is also the
number of bytes transferred) and also how many bytes the EC actually
wanted to send to us.  When computing the checksum and copying back
data let's make sure we take the lesser of the two of those.  We'll
also complain if the EC tried to send us too many bytes.  The EC
sending us too few bytes is legit for when we send the EC an invalid
command.

This is based on similar code in cros_ec_spi.
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Soothes the following checkpatch warnings:

    WARNING: line over 80 characters
    #151: FILE: drivers/mfd/ab8500-core.c:151:
    +	0, 1, 2, 3, 4, -1, -1, -1, -1, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23,

    ERROR: spaces required around that '=' (ctx:VxW)
    #325: FILE: drivers/mfd/ab8500-core.c:325:
    +	ret= mask_and_set_register_interruptible(ab8500, bank, reg,
     	   ^

    WARNING: line over 80 characters
    #418: FILE: drivers/mfd/ab8500-core.c:418:
    +		else if (offset >= AB9540_INT_GPIO50R && offset <= AB9540_INT_GPIO54R)

    WARNING: line over 80 characters
    #420: FILE: drivers/mfd/ab8500-core.c:420:
    +		else if (offset == AB8540_INT_GPIO43R || offset == AB8540_INT_GPIO44R)

    ERROR: spaces required around that '==' (ctx:VxV)
    #454: FILE: drivers/mfd/ab8500-core.c:454:
    +	if ((i==3) && (*offset >= 24))
     	      ^

    ERROR: code indent should use tabs where possible
    #576: FILE: drivers/mfd/ab8500-core.c:576:
    +        .map    = ab8500_irq_map,$

    WARNING: please, no spaces at the start of a line
    #576: FILE: drivers/mfd/ab8500-core.c:576:
    +        .map    = ab8500_irq_map,$

    ERROR: code indent should use tabs where possible
    #577: FILE: drivers/mfd/ab8500-core.c:577:
    +        .xlate  = irq_domain_xlate_twocell,$

    WARNING: please, no spaces at the start of a line
    #577: FILE: drivers/mfd/ab8500-core.c:577:
    +        .xlate  = irq_domain_xlate_twocell,$

    WARNING: char * array declaration might be better as static const
    #1554: FILE: drivers/mfd/ab8500-core.c:1554:
    +	static char *switch_off_status[] = {

    WARNING: char * array declaration might be better as static const
    #1563: FILE: drivers/mfd/ab8500-core.c:1563:
    +	static char *turn_on_status[] = {

    WARNING: sizeof *ab8500 should be sizeof(*ab8500)
    #1582: FILE: drivers/mfd/ab8500-core.c:1582:
    +	ab8500 = devm_kzalloc(&pdev->dev, sizeof *ab8500, GFP_KERNEL);

    ERROR: space required after that close brace '}'
    #1639: FILE: drivers/mfd/ab8500-core.c:1639:
    +	}/* Configure AB8500 or AB9540 IRQ */

    WARNING: line over 80 characters
    #1652: FILE: drivers/mfd/ab8500-core.c:1652:
    +	ab8500->oldmask = devm_kzalloc(&pdev->dev, ab8500->mask_size, GFP_KERNEL);

    WARNING: Prefer [subsystem eg: netdev]_cont([subsystem]dev, ... then dev_cont(dev, ... then pr_cont(...  to printk(KERN_CONT ...
    #1677: FILE: drivers/mfd/ab8500-core.c:1677:
    +				printk(KERN_CONT " \"%s\"",

    WARNING: Prefer [subsystem eg: netdev]_cont([subsystem]dev, ... then dev_cont(dev, ... then pr_cont(...  to printk(KERN_CONT ...
    #1682: FILE: drivers/mfd/ab8500-core.c:1682:
    +		printk(KERN_CONT "\n");

    WARNING: Prefer [subsystem eg: netdev]_cont([subsystem]dev, ... then dev_cont(dev, ... then pr_cont(...  to printk(KERN_CONT ...
    #1684: FILE: drivers/mfd/ab8500-core.c:1684:
    +		printk(KERN_CONT " None\n");

    WARNING: printk() should include KERN_ facility level
    #1695: FILE: drivers/mfd/ab8500-core.c:1695:
    +				printk("\"%s\" ", turn_on_status[i]);

    WARNING: printk() should include KERN_ facility level
    #1700: FILE: drivers/mfd/ab8500-core.c:1700:
    +		printk("None\n");

    total: 5 errors, 14 warnings, 1869 lines checked
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Corrects the following checkpatch gripes:

    WARNING: quoted string split across lines
    #95: FILE: drivers/mfd/ab3100-core.c:95:
    +			"write error (write register) "
    +			"%d bytes transferred (expected 2)\n",

    WARNING: quoted string split across lines
    #139: FILE: drivers/mfd/ab3100-core.c:139:
    +			"write error (write test register) "
    +			"%d bytes transferred (expected 2)\n",

    WARNING: quoted string split across lines
    #175: FILE: drivers/mfd/ab3100-core.c:175:
    +			"write error (send register address) "
    +			"%d bytes transferred (expected 1)\n",

    WARNING: quoted string split across lines
    #193: FILE: drivers/mfd/ab3100-core.c:193:
    +			"write error (read register) "
    +			"%d bytes transferred (expected 1)\n",

    WARNING: quoted string split across lines
    #241: FILE: drivers/mfd/ab3100-core.c:241:
    +			"write error (send first register address) "
    +			"%d bytes transferred (expected 1)\n",

    WARNING: quoted string split across lines
    #256: FILE: drivers/mfd/ab3100-core.c:256:
    +			"write error (read register page) "
    +			"%d bytes transferred (expected %d)\n",

    WARNING: quoted string split across lines
    #299: FILE: drivers/mfd/ab3100-core.c:299:
    +			"write error (maskset send address) "
    +			"%d bytes transferred (expected 1)\n",

    WARNING: quoted string split across lines
    #314: FILE: drivers/mfd/ab3100-core.c:314:
    +			"write error (maskset read register) "
    +			"%d bytes transferred (expected 1)\n",

    WARNING: quoted string split across lines
    #334: FILE: drivers/mfd/ab3100-core.c:334:
    +			"write error (write register) "
    +			"%d bytes transferred (expected 2)\n",

    WARNING: please, no spaces at the start of a line
    #374: FILE: drivers/mfd/ab3100-core.c:374:
    +  return blocking_notifier_chain_unregister(&ab3100->event_subscribers,$

    WARNING: Prefer seq_puts to seq_printf
    #458: FILE: drivers/mfd/ab3100-core.c:458:
    +	seq_printf(s, "AB3100 registers:\n");

    WARNING: quoted string split across lines
    #564: FILE: drivers/mfd/ab3100-core.c:564:
    +			 "debug write reg[0x%02x] with 0x%02x, "
    +			 "after readback: 0x%02x\n",

    WARNING: quoted string split across lines
    #723: FILE: drivers/mfd/ab3100-core.c:723:
    +			 "AB3100 P1E variant detected, "
    +			 "forcing chip to 32KHz\n");

    WARNING: quoted string split across lines
    #882: FILE: drivers/mfd/ab3100-core.c:882:
    +			"could not communicate with the AB3100 analog "
    +			"baseband chip\n");

    WARNING: quoted string split across lines
    #906: FILE: drivers/mfd/ab3100-core.c:906:
    +		dev_err(&client->dev, "accepting it anyway. Please update "
    +			"the driver.\n");

    total: 0 errors, 15 warnings, 999 lines checked
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Soothes checkpatch warning:

    WARNING: simple_strtoul is obsolete, use kstrtoul instead
    #306: FILE: drivers/mfd/aat2870-core.c:306:
    +	addr = simple_strtoul(start, &start, 16);
Signed-off-by: NLee Jones <lee.jones@linaro.org>