There is no multi_write support available if we cannot use raw_write.
This is the case if bus->write is not implemented.

This patch adds a condition that we need bus and bus->write so that
can_multi_write is true.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

use_single_rw currently reflects the capabilities of the connected
device. The capabilities of the bus are currently missing for this
variable.

As there are read only and write only buses we need seperate values for
use_single_rw to also reflect tha capabilities of the bus.

This patch splits use_single_rw into use_single_read and
use_single_write. The initialization is changed to check the
configuration for use_single_rw and to check the capabilities of the
used bus.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

The regmap config does not prohibit val_bytes that are not powers of
two. But the current code of regmap_bulk_write for use_single_rw does
limit the possible val_bytes to 1, 2 and 4.

This patch fixes the behaviour to allow bus writes with non-standard
val_bytes sizes.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Zero length reads make no sense in a regmap context and are likely to
trigger bugs further down the stack so insert an error check, also
silencing compiler warnings about use of ret in cases where we iterate
per register.
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NMark Brown <broonie@kernel.org>

Currently regmap requires that a reg_read callback is supplied, otherwise a
warning is emitted each time regmap_read() is called. This means a device
or bus without readback support needs to supply dummy reg_read callback.
Apart from that regmap_read() will still work fine if a cache is used.

Remove the warning and let regmap_readable() return false if not reg_read
callback is supplied. This means a device no longer has to supply a dummy
callback if it does not support readback and it also doesn't have to have a
readable_reg callback that always returns false since this is now implicit.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

The way the mask is generated in regmap_field_init() is wrong.
Indeed, a field initialized with msb = 31 and lsb = 0 provokes a shift
overflow while calculating the mask field.

On some 32 bits architectures, such as x86, the generated mask is 0,
instead of the expected 0xffffffff.

This patch uses GENMASK() to fix the problem, as this macro is already safe
regarding shift overflow.
Signed-off-by: NMaxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

In big endian mode regmap_bulk_read gives incorrect data
for byte reads.

This is because memcpy of a single byte from an address
after full word read gives different results when
endianness differs. ie. we get little-end in LE and big-end in BE.
Signed-off-by: NArun Chandran <achandran@mvista.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:

IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN

For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also set IRQ_NOPROBE and this has been maintained although it is not
clear that is really needed. There appears to be a great deal of blind
copy and paste of this code.
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Fixed a typo error in the file
Signed-off-by: NSriram Dash <dash.sriram@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Delete jump to a label on the next line, when that label is not
used elsewhere.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier l;
@@

-if (...) goto l;
-l:
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch introduces regmap_get_reg_stride() function which would
be used by the infrastructures like nvmem framework built on top of
regmap. Mostly this function would be used for sanity checks on inputs
within such infrastructure.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch introduces regmap_get_max_register() function which would be
used by the infrastructures like nvmem framework built on top of
regmap.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Existing regmap users call regcache_mark_dirty() as part of the
suspend/resume sequence, to tell regcache that non-default values need to
be resynced post-resume.  Add an internal "no_sync_defaults" regmap flag
to remember this state, so that regcache_sync() can differentiate between
these two cases:

1) HW was reset, so any cache values that match map->reg_defaults can be
safely skipped.  On some chips there are a lot of registers in the
reg_defaults list, so this optimization speeds things up quite a bit.

2) HW was not reset (maybe it was just clock-gated), so if we cached
any writes, they should be sent to the hardware regardless of whether
they match the HW default.  Currently this will write out all values in
the regcache, since we don't maintain per-register dirty bits.
Suggested-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NKevin Cernekee <cernekee@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

We're going to add another "does this register need syncing?" check, so
rather than repeating it in three places, we'll separate all of the
relevant logic into a helper function.
Signed-off-by: NKevin Cernekee <cernekee@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

The irq_domain_ops are not modified by the driver and the irqdomain core
code accepts pointer to a const data.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The tracing events for regmap are confined to the regmap subsystem. It
also requires accessing an internal header. Instead of including the
internal header from a generic file location, move the tracing file
into the regmap directory.

Also rename the regmap tracing header to trace.h, as it is redundant to
keep the regmap.h name when it is in the regmap directory.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch fixes a NULL pointer dereference when enabling regmap event
tracing in the presence of a syscon regmap, introduced by commit bdb0066d
("mfd: syscon: Decouple syscon interface from platform devices").
That patch introduced syscon regmaps that have their dev field set to NULL.
The regmap trace events expect it to point to a valid struct device and feed
it to dev_name():

  $ echo 1 > /sys/kernel/debug/tracing/events/regmap/enable

  Unable to handle kernel NULL pointer dereference at virtual address 0000002c
  pgd = 80004000
  [0000002c] *pgd=00000000
  Internal error: Oops: 17 [#1] SMP ARM
  Modules linked in: coda videobuf2_vmalloc
  CPU: 0 PID: 304 Comm: kworker/0:2 Not tainted 4.0.0-rc2+ #9197
  Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  Workqueue: events_freezable thermal_zone_device_check
  task: 9f25a200 ti: 9f1ee000 task.ti: 9f1ee000
  PC is at ftrace_raw_event_regmap_block+0x3c/0xe4
  LR is at _regmap_raw_read+0x1bc/0x1cc
  pc : [<803636e8>]    lr : [<80365f2c>]    psr: 600f0093
  sp : 9f1efd78  ip : 9f1efdb8  fp : 9f1efdb4
  r10: 00000004  r9 : 00000001  r8 : 00000001
  r7 : 00000180  r6 : 00000000  r5 : 9f00e3c0  r4 : 00000003
  r3 : 00000001  r2 : 00000180  r1 : 00000000  r0 : 9f00e3c0
  Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
  Control: 10c5387d  Table: 2d91004a  DAC: 00000015
  Process kworker/0:2 (pid: 304, stack limit = 0x9f1ee210)
  Stack: (0x9f1efd78 to 0x9f1f0000)
  fd60:                                                       9f1efda4 9f1efd88
  fd80: 800708c0 805f9510 80927140 800f0013 9f1fc800 9eb2f490 00000000 00000180
  fda0: 808e3840 00000001 9f1efdfc 9f1efdb8 80365f2c 803636b8 805f8958 800708e0
  fdc0: a00f0013 803636ac 9f16de00 00000180 80927140 9f1fc800 9f1fc800 9f1efe6c
  fde0: 9f1efe6c 9f732400 00000000 00000000 9f1efe1c 9f1efe00 80365f70 80365d7c
  fe00: 80365f3c 9f1fc800 9f1fc800 00000180 9f1efe44 9f1efe20 803656a4 80365f48
  fe20: 9f1fc800 00000180 9f1efe6c 9f1efe6c 9f732400 00000000 9f1efe64 9f1efe48
  fe40: 803657bc 80365634 00000001 9e95f910 9f1fc800 9f1efeb4 9f1efe8c 9f1efe68
  fe60: 80452ac0 80365778 9f1efe8c 9f1efe78 9e93d400 9e93d5e8 9f1efeb4 9f72ef40
  fe80: 9f1efeac 9f1efe90 8044e11c 80452998 8045298c 9e93d608 9e93d400 808e1978
  fea0: 9f1efecc 9f1efeb0 8044fd14 8044e0d0 ffffffff 9f25a200 9e93d608 9e481380
  fec0: 9f1efedc 9f1efed0 8044fde8 8044fcec 9f1eff1c 9f1efee0 80038d50 8044fdd8
  fee0: 9f1ee020 9f72ef40 9e481398 00000000 00000008 9f72ef54 9f1ee020 9f72ef40
  ff00: 9e481398 9e481380 00000008 9f72ef40 9f1eff5c 9f1eff20 80039754 80038bfc
  ff20: 00000000 9e481380 80894100 808e1662 00000000 9e4f2ec0 00000000 9e481380
  ff40: 800396f8 00000000 00000000 00000000 9f1effac 9f1eff60 8003e020 80039704
  ff60: ffffffff 00000000 ffffffff 9e481380 00000000 00000000 9f1eff78 9f1eff78
  ff80: 00000000 00000000 9f1eff88 9f1eff88 9e4f2ec0 8003df30 00000000 00000000
  ffa0: 00000000 9f1effb0 8000eb60 8003df3c 00000000 00000000 00000000 00000000
  ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
  Backtrace:
  [<803636ac>] (ftrace_raw_event_regmap_block) from [<80365f2c>] (_regmap_raw_read+0x1bc/0x1cc)
   r9:00000001 r8:808e3840 r7:00000180 r6:00000000 r5:9eb2f490 r4:9f1fc800
  [<80365d70>] (_regmap_raw_read) from [<80365f70>] (_regmap_bus_read+0x34/0x6c)
   r10:00000000 r9:00000000 r8:9f732400 r7:9f1efe6c r6:9f1efe6c r5:9f1fc800
   r4:9f1fc800
  [<80365f3c>] (_regmap_bus_read) from [<803656a4>] (_regmap_read+0x7c/0x144)
   r6:00000180 r5:9f1fc800 r4:9f1fc800 r3:80365f3c
  [<80365628>] (_regmap_read) from [<803657bc>] (regmap_read+0x50/0x70)
   r9:00000000 r8:9f732400 r7:9f1efe6c r6:9f1efe6c r5:00000180 r4:9f1fc800
  [<8036576c>] (regmap_read) from [<80452ac0>] (imx_get_temp+0x134/0x1a4)
   r6:9f1efeb4 r5:9f1fc800 r4:9e95f910 r3:00000001
  [<8045298c>] (imx_get_temp) from [<8044e11c>] (thermal_zone_get_temp+0x58/0x74)
   r7:9f72ef40 r6:9f1efeb4 r5:9e93d5e8 r4:9e93d400
  [<8044e0c4>] (thermal_zone_get_temp) from [<8044fd14>] (thermal_zone_device_update+0x34/0xec)
   r6:808e1978 r5:9e93d400 r4:9e93d608 r3:8045298c
  [<8044fce0>] (thermal_zone_device_update) from [<8044fde8>] (thermal_zone_device_check+0x1c/0x20)
   r5:9e481380 r4:9e93d608
  [<8044fdcc>] (thermal_zone_device_check) from [<80038d50>] (process_one_work+0x160/0x3d4)
  [<80038bf0>] (process_one_work) from [<80039754>] (worker_thread+0x5c/0x4f4)
   r10:9f72ef40 r9:00000008 r8:9e481380 r7:9e481398 r6:9f72ef40 r5:9f1ee020
   r4:9f72ef54
  [<800396f8>] (worker_thread) from [<8003e020>] (kthread+0xf0/0x108)
   r10:00000000 r9:00000000 r8:00000000 r7:800396f8 r6:9e481380 r5:00000000
   r4:9e4f2ec0
  [<8003df30>] (kthread) from [<8000eb60>] (ret_from_fork+0x14/0x34)
   r7:00000000 r6:00000000 r5:8003df30 r4:9e4f2ec0
  Code: e3140040 1a00001a e3140020 1a000016 (e596002c)
  ---[ end trace 193c15c2494ec960 ]---

Fixes: bdb0066d (mfd: syscon: Decouple syscon interface from platform devices)
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

When inserting a new register into a block at the lower end the present
bitmap is currently shifted into the wrong direction. The effect of this is
that the bitmap becomes corrupted and registers which are present might be
reported as not present and vice versa.

Fix this by shifting left rather than right.

Fixes: 472fdec7("regmap: rbtree: Reduce number of nodes, take 2")
Reported-by: NDaniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

regcache_sync() spews warnings when a value was cached for a read-only
register as it tries to write all registers no matter whether they are
writable or not.  This patch adds regmap_wrtieable() checks for
avoiding it in regcache_sync_block_single() and regcache_block_raw().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Since commit 1c6c6952 ("genirq: Reject
bogus threaded irq requests") threaded IRQs without a primary handler
need to be requested with IRQF_ONESHOT, otherwise the request will fail.

The %irq_flags flag is used to request the threaded IRQ and is also a
parameter of the caller.  Hence, we cannot be sure that IRQF_ONESHOT is
set.  This change avoids the potentially missing flag by setting
IRQF_ONESHOT when requesting the threaded IRQ.

Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci
Signed-off-by: NValentin Rothberg <Valentin.Rothberg@lip6.fr>
Signed-off-by: NMark Brown <broonie@kernel.org>

SMBus access functions assume that 16-bit values are formatted as
little endian numbers. The direct i2c access functions in regmap,
however, assume that 16-bit values are formatted as big endian numbers.
As a result, the current code returns different values if an i2c chip's
16-bit registers are accessed through i2c access functions vs. SMBus
access functions.

Use regmap_smbus_read_word_swapped and regmap_smbus_write_word_swapped
for 16-bit SMBus accesses if a chip is configured as REGMAP_ENDIAN_BIG.
If the chip is configured as REGMAP_ENDIAN_LITTLE, keep using
regmap_smbus_write_word_data and regmap_smbus_read_word_data. Otherwise
reject registration if the controller does not support direct i2c accesses.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NMark Brown <broonie@kernel.org>

We'll need to call it from regmap-i2c.c, which can be built as module.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NMark Brown <broonie@kernel.org>

Signed-off-by: NMark Brown <broonie@kernel.org>

This patch move struct regmap.spinlock_flags into the union of
spinlock, so that we can shrink struct regmap size.
Signed-off-by: NYalin Wang <yalin.wang@sonymobile.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Use the recently added support for bus operations to provide a standard
mapping for AC'97 register I/O.
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>

If the inlcude headers aren't sorted alphabetically, then the
logical choice is to append new ones, however that creates a
lot of potential for conflicts or duplicates because every change
will then add new includes in the same location.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

When all the registers are volatile(unlikely, but logically and mostly
will happen for some 'device' who has very few registers), then the
count will be euqal to 0, then kmalloc() will return ZERO_SIZE_PTR,
which equals to ((void *)16).

So this patch fix this with just doing the zero check before calling
kmalloc(). If the count == 0, so we can make sure that all the registers
are volatile, so no cache is need.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch fixes checkpatch.pl warning for regmap cache.
WARNING : prefer kmalloc_array over kmalloc with multiply
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This may speed regcache_hw_init() up for some cases that there
has volatile registers.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

When kmalloc() fails, we should return -ENOMEM.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Remove the redundant code for regmap cache.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

When kmalloc() fails, we should return -ENOMEM.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The macro "REGMAP_ALLOW_WRITE_DEBUGFS" can be used to enable write
support on the registers file in the debugfs. The mode of the file is
fixed to 0400 so it is not possible to write the file ever.

This patch fixes the mode by setting it to the correct value depending
on the macro.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Since we cannot make sure the 'val_count' will always be none zero
here, and then if it equals to zero, the kmemdup() will return
ZERO_SIZE_PTR, which equals to ((void *)16).

So this patch fix this with just doing the zero check before calling
kmemdup().
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

If 'map->dev' is NULL and there will lead dev_name() to be NULL pointer
dereference. So before dev_name(), we need to have check of the map->dev
pionter.

We also should make sure that the 'name' pointer shouldn't be NULL for
debugfs_create_dir(). So here using one default "dummy" debugfs name when
the 'name' pointer and 'map->dev' are both NULL.
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

If LOG_DEVICE is defined and map->dev is NULL it will lead to NULL
pointer dereference. This patch fixes this issue by adding check for
dev->NULL in all such places in regmap.c
Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

Recents commits for getting reg endianness causing NULL pointer
dereference if dev is passed NULL in regmap_init_mmio. This patch
fixes this issue, and allows to parse reg endianness only if dev
and dev->of_node exist.
Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Call stack of regcache_sync calls may not emit any error message even if
operation was cancelled due an error in I/O driver. One such a silent error
is for instance if I2C bus driver doesn't receive ACK from the I2C device
and returns -EREMOTEIO.

Since many users of regcache_sync() don't check and print the error there is
no any indication that HW registers are potentially out of sync.
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

this patch change struct regmap->mutex and struct regmap->spinlock
as an union, because these 2 members are only used one of them,
we change it to shrink the struct size.
Signed-off-by: NYalin Wang <yalin.wang@sonymobile.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The macro "REGMAP_ALLOW_WRITE_DEBUGFS" can be used to enable write
support on the registers file in the debugfs. The mode of the file is
fixed to 0400 so it is not possible to write the file ever.

This patch fixes the mode by setting it to the correct value depending
on the macro.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Signed-off-by: NMark Brown <broonie@kernel.org>