Ocfs2's local allocator disables itself for the duration of a mount point
when it has trouble allocating a large enough area from the primary bitmap.
That can cause performance problems, especially for disks which were only
temporarily full or fragmented. This patch allows for the allocator to
shrink it's window first, before being disabled. Later, it can also be
re-enabled so that any performance drop is minimized.

To do this, we allow the value of osb->local_alloc_bits to be shrunk when
needed. The default value is recorded in a mostly read-only variable so that
we can re-initialize when required.

Locking had to be updated so that we could protect changes to
local_alloc_bits. Mostly this involves protecting various local alloc values
with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which
is used when the local allocator is has shrunk, but is not disabled. If the
available space dips below 1 megabyte, the local alloc file is disabled. In
either case, local alloc is re-enabled 30 seconds after the event, or when
an appropriate amount of bits is seen in the primary bitmap.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

Do this instead of tracking absolute local alloc size. This avoids
needless re-calculatiion of bits from bytes in localalloc.c. Additionally,
the value is now in a more natural unit for internal file system bitmap
work.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

This is actually pretty easy since fs/dlm already handles the bulk of the
work. The Ocfs2 userspace cluster stack module already uses fs/dlm as the
underlying lock manager, so I only had to add the right calls.

Cluster-aware POSIX locks ("plocks") can be turned off by the same means at
UNIX locks - mount with 'noflocks', or create a local-only Ocfs2 volume.
Internally, the file system uses two sets of file_operations, depending on
whether cluster aware plocks is required. This turns out to be easier than
implementing local-only versions of ->lock.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.

This was posted for review some time ago and I believe its been in -mm
since then.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (60 commits)
  Blackfin arch: make sure we include the fix for SPORT hysteresis when reprogramming clocks
  Blackfin arch: Fix bogus str_ident check in gpio code
  Blackfin arch: AD7879 Touchscreen driver
  Blackfin arch: introducing bfin_addr_dcachable
  Blackfin arch: fix a typo in comments
  Blackfin arch: Remove useless head file
  Blackfin arch: make sure L2 start and length are always defined (fixes building on BF542)
  Blackfin arch: use the Blackfin on-chip ROM to do software reset when possible
  Blackfin arch: update anomaly headers to match the latest sheet
  Blackfin arch: bfin_reset() is an internal reboot function ... everyone should go through machine_restart()
  Blackfin arch: print out error/warning if you are running on the incorrect CPU type
  Blackfin arch: remove non-bf54x ifdef logic since this file is only compiled on bf54x parts
  Blackfin arch: update board defconfigs
  Blackfin arch: Add optional verbose debug
  Blackfin arch: emulate a TTY over the EMUDAT/JTAG interface
  Blackfin arch: have is_user_addr_valid() check for overflows (like when address is -1)
  Blackfin arch: ptrace - fix off-by-one check on end of memory regions
  Blackfin arch: Enable framebuffer support for the BF526-EZkit TFT LCD display
  Blackfin arch: flash memory map and dm9000 resources updating
  Blackfin arch: early prink code still use uart core console functions to parse and set configure option string
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net/mac80211/rx.c: fix build error
  acpi: Make ACPI_TOSHIBA depend on INPUT.
  net/bfin_mac.c MDIO namespace fixes
  jme: remove unused #include <version.h>
  netfilter: remove unused #include <version.h>
  net: Fix off-by-one in skb_dma_map
  smc911x: Add support for LAN921{5,7,8} chips from SMSC
  qlge: remove duplicated #include
  wireless: remove duplicated #include
  net/au1000_eth.c MDIO namespace fixes
  net/tc35815.c: fix compilation
  sky2: Fix WOL regression
  r8169: NULL pointer dereference on r8169 load

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  chmc: Mark %ver register inline asm with __volatile__
  sparc64: Add missing notify_cpu_starting() call.
  sparc32: fix build errors

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (33 commits)
  ALSA: ASoC codec: remove unused #include <version.h>
  ALSA: ASoC: update email address for Liam Girdwood
  ALSA: hda: corrected invalid mixer values
  ALSA: hda: add mixers for analog mixer on 92hd75xx codecs
  ALSA: ASoC: Add destination and source port for DMA on OMAP1
  ALSA: ASoC: Drop device registration from GTA01 lm4857 driver
  ALSA: ASoC: Fix build of GTA01 audio driver
  ALSA: ASoC: Add widgets before setting endpoints on GTA01
  ALSA: ASoC: Fix inverted input PGA mute bits in WM8903
  ALSA: ASoC: OMAP: Set DMA stream name at runtime in McBSP DAI driver
  ALSA: ASoC: OMAP: Add support for OMAP2430 and OMAP34xx in McBSP DAI driver
  ALSA: ASoC: OMAP: Add multilink support to McBSP DAI driver
  ALSA: ASoC: Make TLV320AIC26 user-visible
  ALSA: ASoC - clean up Kconfig for TLV320AIC2
  ALSA: ASoC: Make WM8510 microphone input a DAPM mixer
  ALSA: ASoC: Implement WM8510 bias level control
  ALSA: ASoC: Remove unused AUDIO_NAME define from codec drivers
  ALSA: ASoC: tlv320aic3x: Use uniform tlv320aic naming
  ALSA: ASoC: Add WM8510 SPI support
  ALSA: ASoC: Add WM8753 SPI support
  ...

* 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
  proc: remove kernel.maps_protect
  proc: remove now unneeded ADDBUF macro
  [PATCH] proc: show personality via /proc/pid/personality
  [PATCH] signal, procfs: some lock_task_sighand() users do not need rcu_read_lock()
  proc: move PROC_PAGE_MONITOR to fs/proc/Kconfig
  proc: make grab_header() static
  proc: remove unused get_dma_list()
  proc: remove dummy vmcore_open()
  proc: proc_sys_root tweak
  proc: fix return value of proc_reg_open() in "too late" case

Fixed up trivial conflict in removed file arch/sparc/include/asm/dma_32.h

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (24 commits)
  integrity: special fs magic
  As pointed out by Jonathan Corbet, the timer must be deleted before
  ERROR: code indent should use tabs where possible
  The tpm_dev_release function is only called for platform devices, not pnp
  Protect tpm_chip_list when transversing it.
  Renames num_open to is_open, as only one process can open the file at a time.
  Remove the BKL calls from the TPM driver, which were added in the overall
  netlabel: Add configuration support for local labeling
  cipso: Add support for native local labeling and fixup mapping names
  netlabel: Changes to the NetLabel security attributes to allow LSMs to pass full contexts
  selinux: Cache NetLabel secattrs in the socket's security struct
  selinux: Set socket NetLabel based on connection endpoint
  netlabel: Add functionality to set the security attributes of a packet
  netlabel: Add network address selectors to the NetLabel/LSM domain mapping
  netlabel: Add a generic way to create ordered linked lists of network addrs
  netlabel: Replace protocol/NetLabel linking with refrerence counts
  smack: Fix missing calls to netlbl_skbuff_err()
  selinux: Fix missing calls to netlbl_skbuff_err()
  selinux: Fix a problem in security_netlbl_sid_to_secattr()
  selinux: Better local/forward check in selinux_ip_postroute()
  ...

* git://git.infradead.org/users/dwmw2/random-2.6:
  Fix autoloading of MacBook Pro backlight driver.
  Automatic MODULE_ALIAS() for DMI match tables.
  Remove asm/a.out.h files for all architectures without a.out support.
  Introduce HAVE_AOUT symbol to remove hard-coded arch list for BINFMT_AOUT
  Remove redundant CONFIG_ARCH_SUPPORTS_AOUT
  S390: Update comments about why we don't use <asm-generic/statfs.h>
  SPARC: Use <asm-generic/statfs.h>
  PowerPC: Use <asm-generic/statfs.h>
  PARISC: Use <asm-generic/statfs.h>
  x86_64: Use <asm-generic/statfs.h>
  IA64: Use <asm-generic/statfs.h>
  ARM: Use <asm-generic/statfs.h>
  Make <asm-generic/statfs.h> suitable for 64-bit platforms.
  Define and use PCI_DEVICE_ID_MARVELL_88ALP01_CCIC for CAFÉ camera driver
  [MTD] [NAND] Define and use PCI_DEVICE_ID_MARVELL_88ALP01_NAND for CAFÉ
  Use PCI_DEVICE_ID_88ALP01 for CAFÉ chip, rather than PCI_DEVICE_ID_CAFE.
  EFS: Don't set f_fsid in statfs().

Merges oprofile, timers/hpet, x86/traps, x86/time, and x86/core misc items.

* 'x86-core-v4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (132 commits)
  x86: change early_ioremap to use slots instead of nesting
  x86: adjust dependencies for CONFIG_X86_CMOV
  dumpstack: x86: various small unification steps, fix
  x86: remove additional_cpus
  x86: remove additional_cpus configurability
  x86: improve UP kernel when CPU-hotplug and SMP is enabled
  dumpstack: x86: various small unification steps
  dumpstack: i386: make kstack= an early boot-param and add oops=panic
  dumpstack: x86: use log_lvl and unify trace formatting
  dumptrace: x86: consistently include loglevel, print stack switch
  dumpstack: x86: add "end" parameter to valid_stack_ptr and print_context_stack
  dumpstack: x86: make printk_address equal
  dumpstack: x86: move die_nmi to dumpstack_32.c
  traps: x86: finalize unification of traps.c
  traps: x86: make traps_32.c and traps_64.c equal
  traps: x86: various noop-changes preparing for unification of traps_xx.c
  traps: x86_64: use task_pid_nr(tsk) instead of tsk->pid in do_general_protection
  traps: i386: expand clear_mem_error and remove from mach_traps.h
  traps: x86_64: make io_check_error equal to the one on i386
  traps: i386: use preempt_conditional_sti/cli in do_int3
  ...

Original idea for this from a patch by Rodolfo Giometti which merges various
bits of PPS support
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Drop the kernel lock further and also correct cases where we set rc to an
error code, and then return 0
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get_current_tty now does internal locking and returns a referenced object,
thus our use of tty_mutex here can go away.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/char/tty_io.c:1413:17: warning: symbol 'buf' shadows an earlier one
drivers/char/tty_io.c:1379:20: originally declared here
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The multiple drivers share the minor space occupied by a particular major
number, the actual index within the device name's space is indicated by
the tty_driver->name_base + uart_port->line

Another usable formula is (uart_driver->minor - MINOR_BASE) + port->line

Use those to print the device names properly in such situations in
serial_core.c and 8250.c
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Closes bug #11408 by checking the card index range for command 0
Fixes the ioctl to return ENOTTY which is correct for unknown ioctls
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove/fix some bogus NULL checks, comment some locking etc
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Many tty drivers contain 'can't happen' checks against NULL pointers passed
in by the tty layer. These have never been possible to occur. Even more
importantly if they ever do occur we want to know as it would be a serious
bug.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Stephen's fixes reminded me that gigaset is still rather broken so fix it up
a bit
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Today's linux-next build (x86_64 allmodconfig) failed like this:

/drivers/char/tty_ioctl.c: In function 'change_termios':
drivers/isdn/capi/capi.c:1234: error: implicit declaration of function 'n_tty_ioctl'
drivers/isdn/gigaset/ser-gigaset.c: In function 'gigaset_tty_ioctl':
drivers/isdn/gigaset/ser-gigaset.c:648: error: implicit declaration of function 'n_tty_ioctl'

Introduced by commit 686b5e4aea05a80e370dc931b7f4a8d03c80da54
("tty-move-canon-specials").  I added the following patch (which may not
be correct).
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the set up on ldisc change into the ldisc
Move the INQ/OUTQ cases into the driver not in shared ioctl code where it
gives bogus answers for other ldisc values
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Copy the simplification from the pty unix98 special case to the generic one.
This allows us to kill off driver->termios_locked entirely which is nice. We
have to whack bits of the cris driver as it meddles in places it shouldn't
providing its own arrays that were never used anyway.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need both termios and termios_locked so allocate them as one
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The updating and moving around of the pty code added a bug where both the
helper and caller free the main tty struct (the pty driver must free the
o_tty pair itself however).
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We've done the heavy lifting now its time to mop up a bit
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When creating a new pty, save the pty's inode in the tty->driver_data.
Use this inode in pty_kill() to identify the devpts instance. Since
we now have the inode for the pty, we can skip get_node() lookup and
remove the unused get_node().

TODO:
	- check if the mutex_lock is needed in pty_kill().
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

devpts_pty_new() is called when setting up a new pty and would not
will not have an existing dentry or inode for the pty. So don't bother
looking for an existing dentry - just create a new one.
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As pointed out by H. Peter Anvin, since the inode for the pty is known,
we don't need to look it up.
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pass-in 'inode' or 'tty' parameter to devpts interfaces.  With multiple
devpts instances, these parameters will be used in subsequent patches
to identify the instance of devpts mounted. The parameters also help
simplify devpts implementation.

Changelog[v3]:
	- minor changes due to merge with ttydev updates
	- rename parameters to emphasize they are ptmx or pts inodes
	- pass-in tty_struct * to devpts_pty_kill() (this will help
	  cleanup the get_node() call in a subsequent patch)
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move tty_driver_lookup_tty() and tty_reopen() from tty_init_dev()
into tty_open() (one of the two callers of tty_init_dev()).  These
calls are not really required in ptmx_open(), the other caller,
since ptmx_open() would be setting up a new tty.

Changelog[v2]:
	- remove the lookup and reopen calls from ptmx_open
	- merge with recent changes to ttydev tree
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The majority of the remaining init_dev code is pty special cases. We
refactor this code into the driver->install method.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Original suggestion and proposal from Sukadev Bhattiprolu.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have the lookup operation abstracted which is nice for pty cleanup but
we really want to abstract the add/remove entries as well so that we can
pull the pty code out of the tty core and create a clear defined interface
for the tty driver table.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix up the naming, style and extract some bits of code into the driver
specific code
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the 'find-tty' and 'fast-track-open' parts of init_dev() to
separate functions.
Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Carry on pushing code out of tty_io when it belongs to other drivers. I'm
not 100% happy with some of this and it will be worth revisiting some of the
exports later when the restructuring work is done.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Right now there are various drivers that try to use tty->count to know when
they get the final close. Aristeau Rozanski showed while debugging the vt
sysfs race that this isn't entirely safe.

Instead of driver side tricks to work around this introduce a shutdown which
is called when the tty is being destructed. This also means that the shutdown
method is tied into the refcounting.

Use this to rework the console close/sysfs logic.

Remove lots of special case code from the tty core code. The pty code can now
have a shutdown() method that replaces the special case hackery in the tree
free up paths.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>