Since the definition of the function is in flow_dissector.c, it makes
sense to have the declaration in flow_dissector.h
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since these functions are defined in flow_dissector.c, move header
declarations from skbuff.h into flow_dissector.h
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 56193d1b ("net: Add function for parsing the header length out
of linear ethernet frames") added this function declaration but it is
defined nowhere.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

add couple of empty lines on the way.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: Bowdlerise PTP MCDI errors

When the NIC doesn't support PTP, probe-time MCDI commands fail in
predictable ways.  Instead of logging cryptic MCDI errors, just log that
PTP isn't supported.

v2: Hopefully stop Thunderbird mangling the patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also, remove a needless netif_err() from efx_ptp_update_stats() - if the
 MCDI fails it'll print its own error message, we don't need another that
 adds no information.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Seems all we want here is to avoid endless 'goto reclassify' loop.
tc_classify_compat even resets this counter when something other
than TC_ACT_RECLASSIFY is returned, so this skb-counter doesn't
break hypothetical loops induced by something other than perpetual
TC_ACT_RECLASSIFY return values.

skb_act_clone is now identical to skb_clone, so just use that.

Tested with following (bogus) filter:
tc filter add dev eth0 parent ffff: \
 protocol ip u32 match u32 0 0 police rate 10Kbit burst \
 64000 mtu 1500 action reclassify
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Four minor merge conflicts:

1) qca_spi.c renamed the local variable used for the SPI device
   from spi_device to spi, meanwhile the spi_set_drvdata() call
   got moved further up in the probe function.

2) Two changes were both adding new members to codel params
   structure, and thus we had overlapping changes to the
   initializer function.

3) 'net' was making a fix to sk_release_kernel() which is
   completely removed in 'net-next'.

4) In net_namespace.c, the rtnl_net_fill() call for GET operations
   had the command value fixed, meanwhile 'net-next' adjusted the
   argument signature a bit.

This also matches example merge resolutions posted by Stephen
Rothwell over the past two days.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix missing copy_from_user in macvtap SIOCSIFHWADDR ioctl.
Signed-off-by: NJustin Cormack <justin@netbsd.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Older gcc versions (e.g.  gcc version 4.4.6) don't like anonymous unions
which was causing build issues on the newly added switchdev attr/obj
structs.  Fix this by using named union on structs.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Reported-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Scott Feldman says:

====================
switchdev: more (minor) cleanups

Fix some sparse warnings and include some documentation review comments that
didn't get picked up in the switchdev Spring Cleanup series.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There were a few review comments on the switchdev.txt documentation that
didn't get included with the Spring Cleanup series, so include them now.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And let driver convert it to host-byte order as needed.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Handle max TX power properly wrt VIFs and the MAC in iwlwifi, from
    Avri Altman.

 2) Use the correct FW API for scan completions in iwlwifi, from Avraham
    Stern.

 3) FW monitor in iwlwifi accidently uses unmapped memory, fix from Liad
    Kaufman.

 4) rhashtable conversion of mac80211 station table was buggy, the
    virtual interface was not taken into account.  Fix from Johannes
    Berg.

 5) Fix deadlock in rtlwifi by not using a zero timeout for
    usb_control_msg(), from Larry Finger.

 6) Update reordering state before calculating loss detection, from
    Yuchung Cheng.

 7) Fix off by one in bluetooth firmward parsing, from Dan Carpenter.

 8) Fix extended frame handling in xiling_can driver, from Jeppe
    Ledet-Pedersen.

 9) Fix CODEL packet scheduler behavior in the presence of TSO packets,
    from Eric Dumazet.

10) Fix NAPI budget testing in fm10k driver, from Alexander Duyck.

11) macvlan needs to propagate promisc settings down the the lower
    device, from Vlad Yasevich.

12) igb driver can oops when changing number of rings, from Toshiaki
    Makita.

13) Source specific default routes not handled properly in ipv6, from
    Markus Stenberg.

14) Use after free in tc_ctl_tfilter(), from WANG Cong.

15) Use softirq spinlocking in netxen driver, from Tony Camuso.

16) Two ARM bpf JIT fixes from Nicolas Schichan.

17) Handle MSG_DONTWAIT properly in ring based AF_PACKET sends, from
    Mathias Kretschmer.

18) Fix x86 bpf JIT implementation of FROM_{BE16,LE16,LE32}, from Alexei
    Starovoitov.

19) ll_temac driver DMA maps TX packet header with incorrect length, fix
    from Michal Simek.

20) We removed pm_qos bits from netdevice.h, but some indirect
    references remained.  Kill them.  From David Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits)
  net: Remove remaining remnants of pm_qos from netdevice.h
  e1000e: Add pm_qos header
  net: phy: micrel: Fix regression in kszphy_probe
  net: ll_temac: Fix DMA map size bug
  x86: bpf_jit: fix FROM_BE16 and FROM_LE16/32 instructions
  netns: return RTM_NEWNSID instead of RTM_GETNSID on a get
  Update be2net maintainers' email addresses
  net_sched: gred: use correct backlog value in WRED mode
  pppoe: drop pppoe device in pppoe_unbind_sock_work
  net: qca_spi: Fix possible race during probe
  net: mdio-gpio: Allow for unspecified bus id
  af_packet / TX_RING not fully non-blocking (w/ MSG_DONTWAIT).
  bnx2x: limit fw delay in kdump to 5s after boot
  ARM: net: delegate filter to kernel interpreter when imm_offset() return value can't fit into 12bits.
  ARM: net fix emit_udiv() for BPF_ALU | BPF_DIV | BPF_K intruction.
  mpls: Change reserved label names to be consistent with netbsd
  usbnet: avoid integer overflow in start_xmit
  netxen_nic: use spin_[un]lock_bh around tx_clean_lock (2)
  net: xgene_enet: Set hardware dependency
  net: amd-xgbe: Add hardware dependency
  ...

Commit e2c65448 removed pm_qos from struct net_device but left the
comment and header file. Remove those.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit e2c65448 moved pm_qos_req to e1000_adapter. Add the header file
that defines the struct.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As xfrm_output_one() is the only caller of skb_dst_pop(), we should
make skb_dst_pop() localized.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't do clock-mode-select if clk == NULL,
since when building without CONFIG_HAVE_CLK,
clk_get returns NULL and clk_get_rate returns 0.

Doing clock-mode-select in this cause causes kszphy_probe to
return -EINVAL and thus prevents the device from being probed.

The original code (before regression) would return 0
when building without CONFIG_HAVE_CLK.

Cc: stable <stable@vger.kernel.org> # 3.18+
Fixes: 1fadee0c ("net/phy: micrel: Add clock support for
KSZ8021/KSZ8031")
Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NNiklas Cassel <niklass@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DMA allocates skb->len instead of headlen
which is used for DMA.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

add an exhaustive set of eBPF tests bringing total to:
test_bpf: Summary: 233 PASSED, 0 FAILED, [0/226 JIT'ed]
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

in-source build of 'make samples/bpf/' was incorrectly
using default compiler instead of invoking clang/llvm.
out-of-source build was ok.

Fixes: a8085782 ("samples: bpf: trivial eBPF program in C")
Signed-off-by: NBrenden Blanco <bblanco@plumgrid.com>
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

FROM_BE16:
'ror %reg, 8' doesn't clear upper bits of the register,
so use additional 'movzwl' insn to zero extend 16 bits into 64

FROM_LE16:
should zero extend lower 16 bits into 64 bit

FROM_LE32:
should zero extend lower 32 bits into 64 bit

Fixes: 89aa0758 ("net: sock: allow eBPF programs to be attached to sockets")
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cleanup few MACROS left out in t4_hw.h to be consistent with the
existing ones. Also replace few hardcoded values with MACROS. Also
update comments for some code
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on the information given to this driver (via the xmit_more skb flag),
we can defer signaling the host if more packets are on the way. This will help
make the host more efficient since it can potentially process a larger batch of
packets. Implement this optimization.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pkt_gen->last_ok was not set properly, so after the first burst
pktgen instead of allocating new packet, will reuse old one, advance
eth_type_trans further, which would mean the stack will be seeing very
short bogus packets.

Fixes: 62f64aed ("pktgen: introduce xmit_mode '<start_xmit|netif_receive>'")
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: systemport: interrupt coalescing support

This patch series adds support for RX & TX interrupt coalescing in the
systemport driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similarly to the TX path, allow the RX path to be configured with both
'rx-frames' and 'rx-usecs' coalescing parameters.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the ability to configure both 'tx-frames' which controls how many frames
are doing to trigger a single interrupt and 'tx-usecs' which dictates how long
to wait before an interrupt should be services.

Since our timer resolution is close to 8.192 us, we round up to the nearest
value the 'tx-usecs' timeout value.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These functions compile to 60 bytes of machine code each.
With this .config: http://busybox.net/~vda/kernel_config
there are 617 calls of netif_tx_stop_queue()
and 49 calls of netif_tx_stop_all_queues() in vmlinux.

To fix this, remove WARN_ON in netif_tx_stop_queue()
as suggested by davem, and deinline netif_tx_stop_all_queues().

Change in code size is about 20k:

   text      data      bss       dec     hex filename
82426986 22255416 20627456 125309858 77813a2 vmlinux.before
82406248 22255416 20627456 125289120 777c2a0 vmlinux

gcc-4.7.2 still creates deinlined version of netif_tx_stop_queue
sometimes:

$ nm --size-sort vmlinux | grep netif_tx_stop_queue | wc -l
190

ffffffff81b558a8 <netif_tx_stop_queue>:
ffffffff81b558a8:       55                      push   %rbp
ffffffff81b558a9:       48 89 e5                mov    %rsp,%rbp
ffffffff81b558ac:       f0 80 8f e0 01 00 00    lock orb $0x1,0x1e0(%rdi)
ffffffff81b558b3:       01
ffffffff81b558b4:       5d                      pop    %rbp
ffffffff81b558b5:       c3                      retq

This needs additional fixing.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
CC: Alexei Starovoitov <alexei.starovoitov@gmail.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
CC: Joe Perches <joe@perches.com>
CC: David S. Miller <davem@davemloft.net>
CC: Jiri Pirko <jpirko@redhat.com>
CC: linux-kernel@vger.kernel.org
CC: netdev@vger.kernel.org
CC: netfilter-devel@vger.kernel.org
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The macvtap driver tries to emulate all the ioctls supported by a normal
tun/tap driver, however it was missing the generic SIOCGIFHWADDR and
SIOCSIFHWADDR ioctls to get and set the mac address that are supported
by tun/tap. This patch adds these.
Signed-off-by: NJustin Cormack <justin@netbsd.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull MIPS fixes from Ralf Baechle:
 "One build fix for build breakage of all MIPS SMP kernels caused by
  Rusty's fix of obsolete use of cpu mask helpers, another to fix the FP
  ABI selection when loading an ELF binary"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: fix FP mode selection in lieu of .MIPS.abiflags data
  MIPS: SMP: Fix build error.

Pull rdma fixes from Doug Ledford:
 - update MAINTAINERS git repo pointer
 - printk garbage fix
 - fix for qib and iw_cxgb4 bugs introduced in 4.1 window
 - fix for an older iWARP netlink bug
 - fix a memcpy issue in ehca driver

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  infiniband: Remove duplicated KERN_<LEVEL> from pr_<level> uses
  IB/qib: fix test of unsigned variable
  RDMA/core: Fix for parsing netlink string attribute
  MAINTAINERS: update the official rdma git repo
  iw_cxgb4: use wildcard mapping for getting remote addr info
  IB/ehca: use correct destination for memcpy

Usually, RTM_NEWxxx is returned on a get (same as a dump).

Fixes: 0c7aecd4 ("netns: add rtnl cmd to add and get peer netns ids")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull power supply and reset fixes from Sebastian Reichel:
 "misc fixes"

* tag 'for-v4.1-rc' of git://git.infradead.org/battery-2.6:
  power: bq27x00_battery: Add missing MODULE_ALIAS
  power: reset: Add MFD_SYSCON depends for brcmstb
  power: reset: ltc2952: Remove bogus hrtimer_start() return value checks
  power_supply: fix oops in collie_battery driver
  power/reset: at91: fix return value check in at91_reset_platform_probe()
  MAINTAINERS: Add me as maintainer of Nokia N900 power supply drivers
  axp288_fuel_gauge: Add original author details

Scott Feldman says:

====================
switchdev: spring cleanup

v7:

Address review comments:

 - [Jiri] split the br_setlink and br_dellink reverts into their own patches
 - [Jiri] some parameter cleanup of rocker's memory allocators
 - [Jiri] pass trans mode as formal parameter rather than hanging off of
     rocker_port.

v6:

Address review comments:

 - [Jiri] split a couple of patches into one-logical-change per patch
 - [Joe Perches] revert checkpatch -f changes for wrapped lines with long
     symbols.

v5:

Address review comments:

 - [Jiri] include Jiri's s/swdev/switchdev rename patches up front.
 - [Jiri] squash some patches.  Now setlink/dellink/getlink patches are in
     three parts: new implementation, convert drivers to new, delete old impl.
 - [Jiri] some minor variable renames
 - [Jiri] use BUG_ON rather than WARN when COMMIT phase fails when PREPARE
     phase said it was safe to come into the water.
 - [Simon] rocker: fix a few transaction prepare-commit cases that were wrong.
     This was the bulk of the changes in v5.

v4:

Well, it was a lot of work, but now prepare-commit transaction model is how
davem advises: if prepare fails, abort the transaction.  The driver must do
resource reservations up front in prepare phase and return those resources if
aborting.  Commit phase would use reserved resources.  The good news is the
driver code (for rocker) now handles resource allocation failures better by not
leaving partially device or driver states.  This is a side-effect of the
prepare phase where state isn't modified; only validation of inputs and
resource reservations happen in the prepare phase.  Since we're supporting
setting attrs and add objs across lower devs in the stacked case, we need to
hold rtnl_lock (or ensure rtnl_lock is held) so lower devs don't move on us
during the prepare-commit transaction.  DSA driver code skips the prepare phase
and goes straight for the commit phase since no up-front allocations are done
and no device failures (that could be detected in the prepare phase) can
happen.

Remove NETIF_F_HW_SWITCH_OFFLOAD from rocker and the swdev_attr_set/get
wrappers.  DSA doesn't set NETIF_F_HW_SWITCH_OFFLOAD, so it can't be in
swdev_attr_set/get.  rocker doesn't need it; or rather can't support
NETIF_F_HW_SWITCH_OFFLOAD being set/cleared at run-time after the device
port is already up and offloading L2/L3.  NETIF_F_HW_SWITCH_OFFLOAD is still
left as a feature flag for drivers that can use it.

Drop the renaming patch for netdev_switch_notifier.  Other renames are a
result of moving to the attr get/set or obj add/del model.  Everything
but the netdev_switch_notifier is still prefixed with "swdev_".

v3:

Move to two-phase prepare-commit transaction model for attr set and obj add.
Driver gets a change in prepare phase to NACK transaction if lack of resources
or support in device.

v2:

Address review comments:

 - [Jiri] squash a few related patches
 - [Roopa] don't remove NETIF_F_HW_SWITCH_OFFLOAD
 - [Roopa] address VLAN setlink/dellink
 - [Ronen] print warning is attr set revert fails

Not address:

 - Using something other than "swdev_" prefix
 - Vendor extentions

The patch set grew a bit to not only support port attr get/set but also add
support for port obj add/del.  Example of port objs are VLAN, FDB entries, and
FIB entries.  The VLAN support now allows the swdev driver to get VLAN ranges
and flags like PVID and "untagged".  Sridhar will be adding FDB obj support
in follow-on patch.

v1:

The main theme of this patch set is to cleanup swdev in preparation for
new features or fixes to be added soon.  We have a pretty good idea now how
to handle stacked drivers in swdev, but there where some loose ends.  For
example, if a set failed in the middle of walking the lower devs, we would
leave the system in an undefined state...there was no way to recover back to
the previous state.  Speaking of sets, also recognize a pattern that most
swdev API accesses are gets or sets of port attributes, so go ahead and make
port attr get/set the central swdev API, and convert everything that is
set-ish/get-ish to this new API.

Features/fixes that should follow from this cleanup:

 - solve the duplicate pkt forwarding issue
 - get/set bridge attrs, like ageing_time, from/to device
 - get/set more bridge port attrs from/to device

There are some rename cleanups tagging along at the end, to give swdev
consistent naming.

And finally, some much needed updates to the switchdev.txt documentation to
hopefully capture the state-of-the-art of swdev.  Hopefully, we can do a better
job keeping this document up-to-date.

Tested with rocker, of course, to make sure nothing functional broke.  There
are a couple minor tweaks to DSA code for getting switch ID and setting STP
updates to use new API, but not expecting amy breakage there.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Much need updated of switchdev documentation to cover what's been
implmented to-date.  There are some XXX comments in the text for
unimplemented or broken items.  I'd like to keep these in there (poor-man's
TODO list) and update the document once each issue is resolved.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>