- 31 1月, 2008 12 次提交
-
-
由 Eric Miao 提交于
1. use ioremap() for registers access, this improves the portability of the driver (e.g. same IP on different processor with different I/O memory range), and make it possible to remove those registers definition in pxa-regs.h as PXA is undergoing a clean-up of that header file 2. use device specific IRQ instead of hardcoded IRQ_KEYPAD, same reason as above 3. clean up the error handling path in _probe() 4. remove DRIVER_NAME and use pdev->name when necessary, we don't actually need a constant string literals Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Eric Miao 提交于
1. Rotary encoder events can be configured either as relative events as the legacy code does or as any specified key code, this is useful on some platform which uses the rotary keys as KEY_{UP/DOWN/LEFT/RIGHT} 2. Add support for direct keys, the corresponding keycodes for each direct key can now be specified within the platform data 3. Remove the direct/rotary key detection code from the IRQ handler to dedicated functions to improve readability Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Eric Miao 提交于
Introduce pxa27x_keypad_config() for keypad registers configuration and remove the reg_kpc, reg_kprec from platform data structure so that configurations of keypad registers can be centralized to a single function. It can also be re-used when resuming. Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Eric Miao 提交于
1. Introduce the "struct pxa27x_keypad" structure for driver specific information, such as "struct clk", generated matrix key codes and so on 2. Use KEY() macro to define matrix keys, instead of original 8x8 map this makes definition easier with keypad where keys are sparse 3. Keep a generated array in "struct pxa27x_keypad" for fast lookup 4. Separate the matrix scan into a dedicated function for readability and report only those keys whose state has been changed, instead of report all states 5. Make use of KPAS to decide the faster path if only one key has been detected Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Eric Miao 提交于
The pin configurations will slowly be moved to the board specific code at initialization thus to make the driver more generic. Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Eric Miao 提交于
The controller should really be called keypad, and also align the naming of functions and structures to use "pxa27x_keypad" as prefix, instead of "pxakbd". Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jiri Kosina 提交于
Reported-by: NHans Aschauer <Hans.Aschauer@web.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Bruce Duncan 提交于
If firmware does not implement AUX_LOOP comand in 32 bit mode it is unlikely to implement it in 64 bit mode. Same goes for active multiplexing. See: http://bugzilla.kernel.org/show_bug.cgi?id=9664Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Carlos Corbacho 提交于
The Acer Aspire 9110 series also requires the Dritek quirk to enable the extra scancodes. Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Richard Purdie 提交于
This patch adds a very simple input power event to APM user suspend event bridge. Its currently only works for the systems using the emulated APM driver but could easily be extended to work with anything with a true APM BIOS too. This covers a standard embedded system need which is to suspend when the user presses a suspend button. It leaves options open to system integrators to ignore (or unload) this code and implement their own more complex event handling system. Its hidden behind the EMBEDDED Kconfig option since its only likely to be of use to embedded style systems. It can be built as a module so the "hardcoded" policy can easily be removed from the kernel at runtime if desired too. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 1月, 2008 19 次提交
-
-
由 Andre Haupt 提交于
Signed-off-by: NAndre Haupt <andre@bitwigglers.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Cdev field was obsolete and provided only for backward compatibility since conversion of input core from class devices to regular devices. It is time to remove it. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Francisco Alecrim 提交于
drivers/char/keyboard.c: linux/consolemap.h is included more than once. Signed-off-by: NFrancisco Alecrim <francisco.alecrim@indt.org.br> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Carlos Corbacho 提交于
Some Wistron based laptops need us to explicitly enable the 'Dritek keyboard extension' to make their extra keys start generating scancodes. Originally, this was just confined to older laptops, but a few Acer laptops have turned up in 2007 that also need this again. Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Baryshkov 提交于
Add keyboard support on tosa (Sharp Zaurus SL-6000x). Largely based on patches by Dirk Opfer. Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Stephen Hemminger 提交于
This driver supports the application buttons on some Fujitsu Lifebook laptops. It is based on the earlier apanel driver done by Jochen Eisenger, but with many changes. The original driver used ioctl's and a separate user space program (see http://apanel.sourceforge.net). This driver hooks into the input subsystem so that the normal keys act as expected without a daemon. In addition to buttons, the Mail Led is handled via LEDs class device. The driver now supports redefinable keymaps and no longer has to have a DMI table for all Fujitsu laptops. I thought about mixing this driver should be integrated into the Fujitsu laptop extras driver that handles backlight, but rejected the idea because it wasn't clear if all the Fujitsu laptops supported both. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 David Brownell 提交于
This stops the ads7846 driver from using dev->power.power_state; that field is deprecated (overdue for removal) and the only reason to update it was to make the /sys/devices/.../power/state files (now removed) work better. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Julia Lawall 提交于
Drop #include <linux/moduleparam.h> in files that also include linux/module.h, since module.h includes moduleparam.h already. Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Steven Whitehouse 提交于
The input example driver uses BTN_0 in the later stages of the example, so this changes the interrupt routine to match. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Stephen Hemminger 提交于
Rounding doesn't matter for the first tick, but we want succeeding ticks to be aligned on second boundary if poll interval is large enough. Also: cancel_rearming_delayed_workqueue is marked as obsolete in workqueue.h so use cancel_delayed_work_sync. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Drivers should use input_{get|set}_drvdata() instead of accessing input_dev->provate directly, but since these drivers do not actually use the data stored there we can simply remove the assignments. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Dmitry Torokhov 提交于
input_{get|set}_drvdata() helpers should be used instead. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
RT guys advised me that in their kernels synchronize_sched() will not work to ensure that all IRQ handlers run to their completion and that synchronize_irq() should be used instead. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
atkbd_disable() provides all necessary synchronization with atkbd_interrupt(). Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Take dev->event_lock to make sure that we don't race with input_event() and also force key up event when removing a key from keymap table. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Giel de Nijs 提交于
Most of Fn+F? special keys on (at least) the Dell Latitude laptops don't generate a hardware key release event so the driver has to generate one. Signed-off-by: NGiel de Nijs <giel@caffeinetrip.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 18 1月, 2008 5 次提交
-
-
由 Dmitry Torokhov 提交于
The recently added support for Dell Volstro 1400 was causing protocol synchronization errors on Acer Aspire 5720ZG, fix it. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Andres Salomon 提交于
The lifebook driver may register a second input device, but it never unregisters it. This fixes that. Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Andres Salomon 提交于
If we successfully call input_register_device() in psmouse_connect() but sysfs_create_group() fails, we'll enter the error path without ever having called input_unregister_device() potentially leaking memory. Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Daniel Ritz 提交于
Fix a buffer overflow in mutli-packet handling code. The overflow can only happen with eGalax devices and is even there very unlikely (only non-report packet are affected any only when truncated after the first byte). Also changes the mutli-packet handling code not to drop unknown packets, but rather just drop one byte. This allows synchronizing on report packets in the data stream. It's required for some egalax devices to work at all. Also remove the pointless 'flags' member of the device struct and set the version number to 0.6, plus some minor cleanups. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Micah Parrish 提交于
Devices like the HP Integrated Remote Console Virtual Mouse, which are standard equipment on all Proliant and Integrity servers, produce absolute coordinates instead of relative coordinates. This is done to synchronize the position of the mouse cursor on the client desktop with the mouse cursor position on the server. Mousedev is not designed to pass those absolute events directly to X, but it can translate them into relative movements. It currently does this for tablet like devices and touchpads. This patch merely tells it to also include a device with ABS_X, ABS_Y, and mouse buttons in its list of devices to process input for. This patch enables the mouse pointer to move when using the remote console. Signed-off-by: NMicah Parrish <micah.parrish@hp.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 14 1月, 2008 1 次提交
-
-
由 Kristoffer Ericson 提交于
Signed-off-by: NKristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 03 1月, 2008 3 次提交
-
-
由 Richard Purdie 提交于
input_handle_event() used to pass EV_PWR events to event handlers but no longer does so in 2.6.23. Modules to trigger power management events based on input power events exist but rely on the EV_PWR events being passed to the input event handlers. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Richard Purdie 提交于
The spitz keyboard driver reports KEY_SUSPEND events but doesn't register its use of this event in the keybit bitfield, breaking input events for this key. This patch fixes that by registering the key in the keybit bitfield. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Ivan Kokshaysky 提交于
This does not make sense and moreover causes build failures on alpha. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-