TMU probe function now checks for a device tree defined regulator.
For compatibility reasons it is allowed to probe driver even without
this regulator defined.
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch adds support for h/w mode calibration in the TMU controller.
Soc's like 5440 support this features. The h/w bits needed for calibration
setting are same as that of enum calibration_type.
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch sets the second point trimming value according to the platform
data if the register value is 0.
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch adds configuration data for exynos5440 soc. Also register
definations for the controller are added.
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch modifies TMU controller to add changes needed to work with
exynos5440 platform. This sensor registers 3 instance of the tmu controller
with the thermal zone and hence reports 3 temperature output. This controller
supports upto five trip points. For critical threshold the driver uses the
core driver thermal framework for shutdown.
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NJungseok Lee <jays.lee@samsung.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch adds support to parse one more common set of TMU register. First
set of register belongs to each instance of TMU and second set belongs to
common TMU registers.
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch uses the device pointer stored in the configuration structure
and converts to dev_* prints and devm API's.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch adds several features supported by TMU as bitfields.
This features varies across different SOC type and comparing
the features present in the TMU is more logical than comparing
the soc itself.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch adds support to handle multiple instances of the TMU controllers.
This is done by removing the static structure to register with the core thermal
and creating it dynamically for each instance of the TMU controller. The
interrupt is made shared type to handle shared interrupts. Now since the ISR needs
the core thermal framework to be registered so request_irq is moved after the core
registration is done.
Also the identifier of the TMU controller is extracted from device tree alias. This
will be used for TMU specific initialisation.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

Recently non DT support from Exynos platform is removed and hence
removing non DT support from the driver also. This will help in easy
maintainence.
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This code simplifies the zone handling to use the trip information passed
by the TMU driver and not the hardcoded macros. This also helps in adding
more zone support.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch removes the error return in the bind/unbind routine
as the platform may not register any cpufreq cooling data.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch renames member private_data to driver_data of the thermal
zone registration structure as this item stores the driver related
data and uses it to call the driver related callbacks.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This code modifies the thermal driver to have multiple thermal zone
support by replacing the global thermal zone variable with device data
member of thermal_zone_device.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch uses the TMU status register to know the generated interrupts
and only clear them in the interrupt handler.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

TMU urgently sends active-high signal (thermal trip) to PMU, and thermal
tripping by hardware logic. Thermal tripping means that PMU cuts off the
whole power of SoC by controlling external voltage regulator.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch migrates the TMU register definition/bitfields to data file. This
is needed to support SoC's which use the same TMU controller but register
validity, offsets or bitfield may slightly vary across SOC's.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch adds entries min_efuse_value, max_efuse_value, default_temp_offset,
trigger_type, cal_type, trim_first_point, trim_second_point, max_trigger_level
trigger_enable in the TMU platform data structure. Also the driver is modified
to use the data passed by these new platform memebers instead of the constant
macros. All these changes helps in separating the SOC specific data part from
the TMU driver.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch adds some extra register bitfield definations and cleans
up the code to prepare for moving register macros and definations inside
the TMU data section. In this code cleanup the TMU enable bit is correctly used
as bit0 and bit1 is taken care which is reserve bit.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This code splits the exynos tmu driver code into SOC specific data parts.
This will simplify adding new SOC specific data to the same TMU controller.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch renames and moves include/linux/platform_data/exynos_thermal.h to
drivers/thermal/samsung/exynos_tmu.h. This file movement is needed as exynos
SOC's are not supporting non-DT based platforms and this file now just contains
exynos tmu driver related definations.
Also struct freq_clip_table is now moved to exynos_thermal_common.c as it fixes
the compilation issue occuring because now this new tmu header file is included
in tmu driver c file and not in the common thermal header file.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch renames exynos_thermal.c to exynos_tmu.c. This change is needed as
this file now just contains exynos tmu driver related codes and thermal zone
or cpufreq cooling registration related changes are not there anymore.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This code bifurcates exynos thermal implementation into common and sensor
specific parts. The common thermal code interacts with core thermal layer and
core cpufreq cooling parts and is independent of SOC specific driver. This
change is needed to cleanly add support for new TMU sensors.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch removes the dependency on CPU_THERMAL for compiling TMU driver.
This is useful for cases when only TMU controller needs to be initialised
without cpu cooling action.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This patch uses the recently added config sybmol ARCH_HAS_BANDGAP to enable
the TMU driver. This will allow adding support for new soc easily as now it
is the platform responsibility to enable this config symbol for a particular
soc.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

This movement of files is done for easy maintenance and adding more
new sensor's support for exynos platform easily . This will also help in
bifurcating exynos common, sensor driver and sensor data related parts.
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>