- 04 8月, 2008 4 次提交
-
-
由 Kumar Gala 提交于
Now that arch/ppc is gone and CONFIG_PPC_MERGE is always set, remove the dead code associated with !CONFIG_PPC_MERGE from arch/powerpc and include/asm-powerpc. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Tony Breeds 提交于
total_memory is a 'phys_addr_t', Which can be either 64 or 32 bits. Force printing as unsigned long long to silence the warning. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Tony Breeds 提交于
Explicitly cast to unsigned long long, rather than u64. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where <asm-powepc/...> was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 02 8月, 2008 36 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Move include/asm-ia64 to arch/ia64/include/asm
-
由 Tim Bird 提交于
This fixes a bug in operator precedence in the newly introduced vc_translate macro. Without this fix, the translation of some characters on the kernel console is garbled. This patch was copied to the e-mail list previously for testing. Now, all reports confirm that it works, so this is an official post for application. Signed-off-by: NTim Bird <tim.bird@am.sony.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Jack Steiner 提交于
Delete 2 EXPORTs that were accidentally sent upstream. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Steven Rostedt 提交于
I asked legal about the licensing of ftrace.txt, and they told me that, unless the Documentation directory is specifically set up to handle non GPL licenses (which it does not appear to be), then it would be best to put ftrace.txt under the GPL. This patch adds a dual license to ftrace.txt such that it is under both the FDL and the GPL. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Wire up for FRV the system calls that were added in the last merge window. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Wire up system calls added in the last merge window for the MN10300 arch. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eugeniy Meshcheryakov 提交于
Currently function tty_ldisc_get() tries to load an ldisc driver module only when tty_ldisc_try_get() returns -EAGAIN. This happens only if module is being unloaded. If ldisc module is not loaded tty_ldisc_try_get() returns -EINVAL and this case is not handled in tty_ldisc_get(), so request_module() is not called. Attached patch fixes this by calling request_module() if tty_ldisc_try_get() returned any error code. I discovered this when my UMTS modem stopped working with 2.6.27-rc1 because module ppp_async was not loaded. Signed-off-by: NEugeniy Meshcheryakov <eugen@debian.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm由 Linus Torvalds 提交于
* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: s390: Fix kvm on IBM System z10 KVM: Advertise synchronized mmu support to userspace KVM: Synchronize guest physical memory map to host virtual memory map KVM: Allow browsing memslots with mmu_lock KVM: Allow reading aliases with mmu_lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6由 Linus Torvalds 提交于
* 'zero-len' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: drivers/media, include/media: delete zero-length files
-
由 Benjamin Herrenschmidt 提交于
Some platform decide whether they support huge pages at boot time. On these, such as powerpc, HPAGE_SHIFT is a variable, not a constant, and is set to 0 when there is no such support. The patches to introduce multiple huge pages support broke that causing the kernel to crash at boot time on machines such as POWER3 which lack support for multiple page sizes. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yoshinori Sato 提交于
ARCH=h8300: init/main.c:781: undefined reference to `___early_initcall_end' Same problem have __start___bug_table __stop___bug_table __tracedata_start __tracedata_end __per_cpu_start __per_cpu_end When defining a symbol in vmlinux.lds, use the VMLINUX_SYMBOL macro. VMLINUX_SYMBOL adds a prefix charactor. You can't just use straight symbol names in common header files as they dont take into consideration weird arch-specific ABI conventions. in the case of Blackfin/h8300, the ABI dictates that any C-visible symbols have an underscore prefixed to them. Thus all symbols in vmlinux.lds.h need to be wrapped in VMLINUX_SYMBOL() so that each arch can put hide this magic in their own files. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bjorn Helgaas 提交于
Each resource should be printed on its own line, so start snprintf'ing at the beginning of the buffer every time through the loop. Also, use scnprintf() rather than snprintf() when building up the buffer to print. scnprintf() returns the number of characters actually written into the buffer (not including the trailing NULL). snprintf() returns the number of characters that *would be* written, assuming everything would fit in the buffer. That's nice if we want to resize the buffer to make sure everything fits, but in this case, I just want to keep from overflowing the buffer, and it's OK if the output is truncated. Using snprintf() meant that my "len" could grow to be more than the the buffer size, which makes "sizeof(buf) - len" negative, which causes this alarming WARN_ON: http://marc.info/?l=linux-kernel&m=121736480005656&w=2 More useful snprintf/scnprintf discussion: http://lwn.net/Articles/69419/Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Reported-by: NPete Clements <clem@clem.clem-digital.net> Cc: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Niels de Vos 提交于
Some module parameters with only one line have the '\n' at the end of the description. This is not needed nor wanted as after the description the type (i.e. int) is followed by a newline. Some modules contain a multi-line description, these are not affected by this patch. Signed-off-by: NNiels de Vos <niels.devos@wincor-nixdorf.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Ed L. Cashin <ecashin@coraid.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Roland Dreier <rolandd@cisco.com> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_it821x: Driver updates and reworking libata.h: replace __FUNCTION__ with __func__ ata_piix: subsys 106b:00a3 is apple ich8m too libata-core: make sure that ata_force_tbl is freed in case of an error libata: update atapi disable handling pata_via: add VX800 flag; add function for fixing h/w bugs pata_ali: misplaced pci_dev_put()
-
git://oss.sgi.com:8090/xfs/xfs-pull由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-pull: (64 commits) [XFS] Remove vn_revalidate calls in xfs. [XFS] Now that xfs_setattr is only used for attributes set from ->setattr [XFS] xfs_setattr currently doesn't just handle the attributes set through [XFS] fix use after free with external logs or real-time devices [XFS] A bug was found in xfs_bmap_add_extent_unwritten_real(). In a [XFS] fix compilation without CONFIG_PROC_FS [XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/ [XFS] fix mount option parsing in remount [XFS] Disable queue flag test in barrier check. [XFS] streamline init/exit path [XFS] Fix up problem when CONFIG_XFS_POSIX_ACL is not set and yet we still [XFS] Don't assert if trying to mount with blocksize > pagesize [XFS] Don't update mtime on rename source [XFS] Allow xfs_bmbt_split() to fallback to the lowspace allocator [XFS] Restore the lowspace extent allocator algorithm [XFS] use minleft when allocating in xfs_bmbt_split() [XFS] attrmulti cleanup [XFS] Check for invalid flags in xfs_attrlist_by_handle. [XFS] Fix CI lookup in leaf-form directories [XFS] Use the generic xattr methods. ...
-
由 Dean Nelson 提交于
Add a reverse dependency of CONFIG_SGI_XP upon CONFIG_SGI_GRU to Kconfig. Signed-off-by: NDean Nelson <dcn@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dean Nelson 提交于
Add a dependency of CONFIG_SGI_XP upon CONFIG_NET to Kconfig. Signed-off-by: NDean Nelson <dcn@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
My commit 2b2a1ff6 introduced a regression (sorry about that) for the odd case of exit_signal=0 (e.g. clone_flags=0). This is not a normal use, but it's used by a case in the glibc test suite. Dying with exit_signal=0 sends no signal, but it's supposed to wake up a parent's blocked wait*() calls (unlike the delayed_group_leader case). This fixes tracehook_notify_death() and its caller to distinguish a "signal 0" wakeup from the delayed_group_leader case (with no wakeup). Signed-off-by: NRoland McGrath <roland@redhat.com> Tested-by: NSerge Hallyn <serue@us.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: raid10: wake up frozen array md: do not count blocked devices as spares md: do not progress the resync process if the stripe was blocked md: delay notification of 'active_idle' to the recovery thread md: fix merge error md: move async_tx_issue_pending_all outside spin_lock_irq
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: [PATCH] ocfs2: Release mutex in error handling code [PATCH] ocfs2: Fix oops when racing files truncates with writes into an mmap region [PATCH 2/2] ocfs2: Fix race between mount and recovery [PATCH 1/2] ocfs2: Add counter in struct ocfs2_dinode to track journal replays [PATCH] configfs: Convenience macros for attribute definition. [PATCH] configfs: Pin configfs subsystems separately from new config_items. [PATCH] configfs: Fix open directory making rmdir() fail [PATCH] configfs: Lock new directory inodes before removing on cleanup after failure [PATCH] configfs: Prevent userspace from creating new entries under attaching directories [PATCH] configfs: Fix failing symlink() making rmdir() fail [PATCH] configfs: Fix symlink() to a removing item [PATCH] configfs: Include linux/err.h in linux/configfs.h
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: locking: fix mutex @key parameter kernel-doc notation
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: scripts/ver_linux: don't set PATH Kconfig/init: change help text to match default value kbuild: genksyms: Include extern information in dumps kbuild: genksyms parser: fix the __attribute__ rule kbuild: scripts/genksyms/lex.l: add %option noinput kconfig: scripts/kconfig/zconf.l: add %option noinput kbuild: fix O=... build of um
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: md: the bitmap code needs to use blk_plug_device_unlocked() block: add a blk_plug_device_unlocked() that grabs the queue lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: fix gdb serial thread queries kgdb: fix kgdb_validate_break_address to perform a mem write kgdb: remove the requirement for CONFIG_FRAME_POINTER
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: ASoC: Export dapm_reg_event() fully ALSA: ASoC: Update Poodle to current ASoC API ALSA: asoc: restrict sample rate and size in Freescale MPC8610 sound drivers ALSA: sound/soc/pxa/tosa.c: removed duplicated include
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits) tcp: MD5: Fix IPv6 signatures skbuff: add missing kernel-doc for do_not_encrypt net/ipv4/route.c: fix build error tcp: MD5: Fix MD5 signatures on certain ACK packets ipv6: Fix ip6_xmit to send fragments if ipfragok is true ipvs: Move userspace definitions to include/linux/ip_vs.h netdev: Fix lockdep warnings in multiqueue configurations. netfilter: xt_hashlimit: fix race between htable_destroy and htable_gc netfilter: ipt_recent: fix race between recent_mt_destroy and proc manipulations netfilter: nf_conntrack_tcp: decrease timeouts while data in unacknowledged irda: replace __FUNCTION__ with __func__ nsc-ircc: default to dongle type 9 on IBM hardware bluetooth: add quirks for a few hci_usb devices hysdn: remove the packed attribute from PofTimStamp_tag isdn: use the common ascii hex helpers tg3: adapt tg3 to use reworked PCI PM code atm: fix direct casts of pointers to u32 in the InterPhase driver atm: fix const assignment/discard warnings in the ATM networking driver net: use the common ascii hex helpers random32: seeding improvement ...
-
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6由 Linus Torvalds 提交于
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: needs new maintainer hwmon: (lm85) Simplify device initialization function hwmon: (lm85) Misc cleanups hwmon: (lm85) Don't write back cached values hwmon: (lm85) Drop dead code hwmon: (lm85) Coding-style cleanups hwmon: (lm75) add new-style driver binding hwmon: (lm75) cleanup/reorg hwmon: (adt7473) clarify an awkward bit of code hwmon: (adt7473) Remove unused defines hwmon: (dme1737) fix voltage scaling hwmon: (dme1737) probe all addresses hwmon: (dme1737) demacrofy for readability
-
由 Jens Axboe 提交于
It doesn't hold the queue lock, so it's both racey on the queue flags and thus spews a warning. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
blk_plug_device() must be called with the queue lock held, so callers often just grab and release the lock for that purpose. Add a helper that does just that. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: [MTD] [NAND] drivers/mtd/nand/nandsim.c: fix printk warnings [MTD] [NAND] Blackfin NFC Driver: Cleanup the error exit path of bf5xx_nand_probe function [MTD] [NAND] Blackfin NFC Driver: use standard dev_err() rather than printk() [MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by default [MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove functions [MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses [MTD] [NAND] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10 [MTD] [NAND] Blackfin NFC Driver: fix bug - do not clobber the status from the first 256 bytes if operating on 512 pages [MTD] [NAND] diskonchip.c fix sparse endian warnings [MTD] [NAND] drivers/mtd/nand/nandsim.c needs div64.h [JFFS2] Fix allocation of summary buffer Fix rename of at91_nand -> atmel_nand [MTD] [NOR] drivers/mtd/chips/jedec_probe.c: fix Am29DL800BB device ID [MTD] MTD_DEBUG always does compile-time typechecks [MTD] DataFlash: bugfix, binary page sizes now handled [MTD] [NAND] fsl_elbc_nand.c: fix printk warning [MTD] [NAND] nandsim: support random page read command [MTD] [NAND] fix subpage read for small page NAND
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [PATCH] pass struct path * to do_add_mount() [PATCH] switch mtd and dm-table to lookup_bdev() [patch 3/4] vfs: remove unused nameidata argument of may_create() [PATCH] devpts: switch to IDA [PATCH 2/2] proc: switch inode number allocation to IDA [PATCH 1/2] proc: fix inode number bogorithmetic [PATCH] fix bdev leak in block_dev.c do_open() [PATCH] fix races and leaks in vfs_quota_on() users [PATCH] clean dup2() up a bit [PATCH] merge locate_fd() and get_unused_fd() [PATCH] ipv4_static_sysctl_init() should be under CONFIG_SYSCTL Re: BUG at security/selinux/avc.c:883 (was: Re: linux-next: Tree
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current由 Linus Torvalds 提交于
* 'audit.b54' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] Fix the bug of using AUDIT_STATUS_RATE_LIMIT when set fail, no error output. [PATCH] Fix the kernel panic of audit_filter_task when key field is set Re: [PATCH] the loginuid field should be output in all AUDIT_CONFIG_CHANGE audit messages kernel/audit.c control character detection is off-by-one [PATCH] Audit: Collect signal info when SIGUSR2 is sent to auditd
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: au1xmmc: raise segment size limit. mmc_block: use proper sg iterators mmc: properly iterate over sg list in debug check mmc_test: Revert "mmc_test: test oversized sg lists" sdhci: check correct return value sdhci: disable DMA for req, not completely sdhci: handle bug in JMB38x for sizes < 4 bytes
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6由 Linus Torvalds 提交于
* 'reg-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: TI bq24022 Li-Ion Charger driver regulator: maintainers - add maintainers for regulator framework. regulator: documentation - ABI regulator: documentation - machine regulator: documentation - regulator driver regulator: documentation - consumer interface regulator: documentation - overview regulator: core kbuild files regulator: regulator test harness regulator: add support for fixed regulators. regulator: regulator framework core regulator: fixed regulator interface regulator: machine driver interface regulator: regulator driver interface regulator: consumer device interface
-
由 Linus Torvalds 提交于
Merge branch 'hotfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'hotfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: SELinux: /proc/mounts should show what it can
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/battery-2.6: power_supply: Sharp SL-6000 (tosa) batteries support power_supply: fix up CHARGE_COUNTER output to be more precise power_supply: add CHARGE_COUNTER property and olpc_battery support for it power_supply: bump EC version check that we refuse to run with in olpc_battery power_supply: cleanup of the OLPC battery driver power_supply: add eeprom dump file to olpc_battery's sysfs power_supply: Support serial number in olpc_battery
-