- 25 1月, 2013 1 次提交
-
-
由 Rahul Sharma 提交于
There's no need to allocate edid twice and do a memcpy when drm helpers exist to do just that. This patch cleans that interaction up, and doesn't keep the edid hanging around in the connector. v4: - removed error check for drm_mode_connector_update_edid_property which is expected to fail for Virtual Connectors like VIDI. Thanks to Seung-Woo Kim. v3: - removed MAX_EDID as it is not used anymore. v2: - changed vidi_get_edid callback inside vidi driver. Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 04 1月, 2013 1 次提交
-
-
由 Inki Dae 提交于
This patch changes file license to GPL Most of exynos files had been copied from some random file and not updated correctly. So this patch corrects the file license. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 13 12月, 2012 1 次提交
-
-
由 Prathyush K 提交于
The wait_for_vblank callback of hdmi and mixer is now moved from overlay_ops to manager_ops. Signed-off-by: NPrathyush K <prathyush.k@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 04 12月, 2012 1 次提交
-
-
由 Inki Dae 提交于
Changelog v2: move iommu support feature to mixer side. And below is Prathyush's comment. According to the new IOMMU framework for exynos sysmmus, the owner of the sysmmu-tv is mixer (which is the actual device that does DMA) and not hdmi. The mmu-master in sysmmu-tv node is set as below in exynos5250.dtsi sysmmu-tv { - mmu-master = <&mixer>; }; Changelog v1: The iommu will be enabled when hdmi sub driver is probed and will be disabled when removed. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 05 10月, 2012 1 次提交
-
-
由 Rahul Sharma 提交于
exynos-drm-hdmi need context pointers from hdmi and mixer. These pointers were expected from the plf data. Cleaned this dependency by exporting i/f which are called by hdmi, mixer driver probes for setting their context. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 04 10月, 2012 1 次提交
-
-
由 Inki Dae 提交于
the values set to registers will be updated into real registers at vsync so dma operation could be malfunctioned when accessed to memory after gem buffer was released. this patch makes sure that hw overlay is disabled before the gem buffer is released. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 20 7月, 2012 1 次提交
-
-
由 Laurent Pinchart 提交于
The passed mode must not be modified by the operation, make it const. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 08 5月, 2012 1 次提交
-
-
由 Joonyoung Shim 提交于
The power and clocks turns on always in exynos hdmi and mixer driver, but we should turn off the power and clocks of exynos hdmi and mixer when the hdmi cable unplugged or when hdmi unused. There are two interrupt to detect hotplug of hdmi cable - internal interrupt and external interrupt. The internal interrupt can use only when hdmi is dpms on so if hdmi is dpms off, we should use external interrupt to detect hotplug of hdmi cable. If hdmi is dpms on, we cannot external interrupt because the gpio pin for external interrupt is used to hdmi HPD pin for internal interrupt. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 12 4月, 2012 1 次提交
-
-
由 Joonyoung Shim 提交于
The mixer driver and hdmi driver have each operation callback functions and they is registered to hdmi common driver. Their struct names in hdmi common driver include display, manager and overlay. It confuses to appear whose operation and two driver cannot register same operation callback functions at the same time. Use their struct names to driver name. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 20 3月, 2012 1 次提交
-
-
由 Inki Dae 提交于
this patch adds mode_fixup feature for hdmi module that specific driver changes current mode to driver desired mode properly. Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 29 12月, 2011 1 次提交
-
-
由 Seung-Woo Kim 提交于
This patch is hdmi display support for exynos drm driver. There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv and some low level code is already in s5p-tv and even headers for register define are almost same. but in this patch, we decide not to consider separated common code with s5p-tv. Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc. 1. mixer. The piece of hardware responsible for mixing and blending multiple data inputs before passing it to an output device. The mixer is capable of handling up to three image layers. One is the output of VP. Other two are images in RGB format. The blending factor, and layers' priority are controlled by mixer's registers. The output is passed to HDMI. 2. vp (video processor). It is used for processing of NV12/NV21 data. An image stored in RAM is accessed by DMA. The output in YCbCr444 format is send to mixer. 3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes pixel data from mixer and transforms it into data frames. The output is send to HDMIPHY interface. 4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to HDMI connector. Basically, it contains a PLL that produces source clock for mixer, vp and hdmi. 5. ddc (display data channel). It is dedicated i2c channel to exchange display information as edid with display monitor. With plane support, exynos hdmi driver fully supports two mixer layes and vp layer. Also vp layer supports multi buffer plane pixel formats having non contigus memory spaces. In exynos drm driver, common drm_hdmi driver to interface with drm framework has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls them. mixer controls all overlay layers in both mixer and vp. Vblank interrupts for hdmi are handled by mixer internally because drm framework cannot support multiple irq id. And pipe number is used to check which display device irq happens. History v2: this version - drm plane feature support to handle overlay layers. - multi buffer plane pixel format support for vp layer. - vp layer support RFCv1: original - at https://lkml.org/lkml/2011/11/4/164Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-