Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 19 4月, 2010 1 次提交
  3. 14 4月, 2010 1 次提交
    • I
      perf: Fix endianness argument compatibility with OPT_BOOLEAN() and introduce OPT_INCR() · c0555642
      由 Ian Munsie 提交于 
      Parsing an option from the command line with OPT_BOOLEAN on a
bool data type would not work on a big-endian machine due to the
manner in which the boolean was being cast into an int and
incremented. For example, running 'perf probe --list' on a
PowerPC machine would fail to properly set the list_events bool
and would therefore print out the usage information and
terminate.

This patch makes OPT_BOOLEAN work as expected with a bool
datatype. For cases where the original OPT_BOOLEAN was
intentionally being used to increment an int each time it was
passed in on the command line, this patch introduces OPT_INCR
with the old behaviour of OPT_BOOLEAN (the verbose variable is
currently the only such example of this).

I have reviewed every use of OPT_BOOLEAN to verify that a true
C99 bool was passed. Where integers were used, I verified that
they were only being used for boolean logic and changed them to
bools to ensure that they would not be mistakenly used as ints.
The major exception was the verbose variable which now uses
OPT_INCR instead of OPT_BOOLEAN.
Signed-off-by: NIan Munsie <imunsie@au.ibm.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport
Cc: Git development list <git@vger.kernel.org>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: WANG Cong <amwang@redhat.com>
Cc: Thiago Farina <tfransosi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c0555642
  5. 03 4月, 2010 1 次提交
  7. 26 3月, 2010 2 次提交
  9. 16 3月, 2010 1 次提交
    • A
      perf annotate: Properly notify the user that vmlinux is missing · d06d92b7
      由 Arnaldo Carvalho de Melo 提交于 
      Before this patch we would not find a vmlinux, then try to pass
objdump "[kernel.kallsyms]" as the filename, it would get
confused and produce no output:

 [root@doppio ~]# perf annotate n_tty_write

 ------------------------------------------------
  Percent |      Source code & Disassembly of [kernel.kallsyms]
 ------------------------------------------------

Now we check that and emit meaningful warning:

 [root@doppio ~]# perf annotate n_tty_write
 Can't annotate n_tty_write: No vmlinux file was found in the
 path: [0] vmlinux
 [1] /boot/vmlinux
 [2] /boot/vmlinux-2.6.34-rc1-tip+
 [3] /lib/modules/2.6.34-rc1-tip+/build/vmlinux
 [4] /usr/lib/debug/lib/modules/2.6.34-rc1-tip+/vmlinux
 [root@doppio ~]#

This bug was introduced when we added automatic search for
vmlinux, before that time the user had to specify a vmlinux
file.

v2: Print the warning just for the first symbol found when no
    symbol name is specified, otherwise it will spam the screen
    repeating the warning for each symbol.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org>
LKML-Reference: <1268669073-6856-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d06d92b7
  11. 10 3月, 2010 2 次提交
  13. 26 2月, 2010 2 次提交
    • A
      perf annotate: Handle samples not at objdump output addr boundaries · 48fb4fdd
      由 Arnaldo Carvalho de Melo 提交于 
      Without this patch we get this for need_resched:

[root@mica ~]# perf annotate need_resched

------------------------------------------------
 Percent |      Source code & Disassembly of vmlinux
------------------------------------------------
         :
         :
         :      Disassembly of section .text:
         :
         :      ffffffff810095ed <need_resched>:
         :              return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
         :      }
         :
         :      static inline int need_resched(void)
         :      {
    0.00 :      ffffffff810095ed:       55                      push   %rbp
         :              return unlikely(test_thread_flag(TIF_NEED_RESCHED));
    0.00 :      ffffffff810095ee:       be 03 00 00 00          mov    $0x3,%esi
         :
         :      static inline struct thread_info *current_thread_info(void)
         :      {
         :              struct thread_info *ti;
         :              ti = (void *)(percpu_read_stable(kernel_stack) +
    0.00 :      ffffffff810095f3:       65 48 8b 3c 25 48 b5    mov    %gs:0xb548,%rdi
    0.00 :      ffffffff810095fa:       00 00
         :              return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
         :      }
         :
         :      static inline int need_resched(void)
         :      {
    0.00 :      ffffffff810095fc:       48 89 e5                mov    %rsp,%rbp
         :              return unlikely(test_thread_flag(TIF_NEED_RESCHED));
    0.00 :      ffffffff810095ff:       48 81 ef d8 1f 00 00    sub    $0x1fd8,%rdi
    0.00 :      ffffffff81009606:       e8 9d ff ff ff          callq  ffffffff810095a8 <test_ti_thread_flag>
         :      }
    0.00 :      ffffffff8100960b:       c9                      leaveq
    0.00 :      ffffffff8100960c:       85 c0                   test   %eax,%eax
    0.00 :      ffffffff8100960e:       0f 95 c0                setne  %al
    0.00 :      ffffffff81009611:       0f b6 c0                movzbl %al,%eax
         :      Disassembly of section .vsyscall_0:
         :      Disassembly of section .vsyscall_fn:
         :      Disassembly of section .vsyscall_1:
         :      Disassembly of section .vsyscall_2:
         :      Disassembly of section .init.text:
         :      Disassembly of section .altinstr_replacement:
         :      Disassembly of section .exit.text:
[root@mica ~]#

But from the 'perf report' result we know that there are hits
for need_resched on a 4 way machine mostly doing nothing, so
after adding code to show what is in each hist offset and
collapsing IP hits for what happens between objdump lines we
get, for the same perf.data file:

[root@mica ~]# perf annotate -v need_resched

------------------------------------------------
 Percent |      Source code & Disassembly of vmlinux
------------------------------------------------
         :
         :
         :      Disassembly of section .text:
         :
         :      ffffffff810095ed <need_resched>:
         :              return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
         :      }
         :
         :      static inline int need_resched(void)
         :      {
    0.00 :      ffffffff810095ed:       55                      push   %rbp
         :              return unlikely(test_thread_flag(TIF_NEED_RESCHED));
   52.78 :      ffffffff810095ee:       be 03 00 00 00          mov    $0x3,%esi
         :
         :      static inline struct thread_info *current_thread_info(void)
         :      {
         :              struct thread_info *ti;
         :              ti = (void *)(percpu_read_stable(kernel_stack) +
    0.00 :      ffffffff810095f3:       65 48 8b 3c 25 48 b5    mov    %gs:0xb548,%rdi
    0.00 :      ffffffff810095fa:       00 00
         :              return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
         :      }
         :
         :      static inline int need_resched(void)
         :      {
    0.00 :      ffffffff810095fc:       48 89 e5                mov    %rsp,%rbp
         :              return unlikely(test_thread_flag(TIF_NEED_RESCHED));
    9.72 :      ffffffff810095ff:       48 81 ef d8 1f 00 00    sub    $0x1fd8,%rdi
    0.00 :      ffffffff81009606:       e8 9d ff ff ff          callq  ffffffff810095a8 <test_ti_thread_flag>
         :      }
    0.00 :      ffffffff8100960b:       c9                      leaveq
    0.00 :      ffffffff8100960c:       85 c0                   test   %eax,%eax
   37.50 :      ffffffff8100960e:       0f 95 c0                setne  %al
    0.00 :      ffffffff81009611:       0f b6 c0                movzbl %al,%eax
         :      Disassembly of section .vsyscall_0:
         :      Disassembly of section .vsyscall_fn:
         :      Disassembly of section .vsyscall_1:
         :      Disassembly of section .vsyscall_2:
         :      Disassembly of section .init.text:
         :      Disassembly of section .altinstr_replacement:
         :      Disassembly of section .exit.text:
[root@mica ~]#

And now 'perf annotate -v', verbose mode, will show the hits per
precise IP, so that one can make sense of the attribution to
each objdumop line:

[root@mica ~]# perf annotate -v need_resched
Looking at the vmlinux_path (5 entries long)
Using /lib/modules/2.6.33-rc8-tip-00784-g3471df5-dirty/build/vmlinux
for symbols annotate_sym: filename=/lib/modules/2.6.33-rc8-tip-00784-g3471df5-dirty/build/vmlinux, sym=need_resched, start=0xffffffff810095ed, end=0xffffffff81009614

------------------------------------------------
 Percent |      Source code & Disassembly of vmlinux
------------------------------------------------
                ffffffff810095f1: 152
                ffffffff81009603: 28
                ffffffff8100960f: 55
                ffffffff81009610: 53
                          h->sum: 288
<SNIP same annotation>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1267194194-15670-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      48fb4fdd
    • A
      perf annotate: Defer allocating sym_priv->hist array · 628ada0c
      由 Arnaldo Carvalho de Melo 提交于 
      Because symbol->end is not fixed up at symbol_filter time, only
after all symbols for a DSO are loaded, and that, for asm
symbols, may be bogus, causing segfaults when hits happen in
these symbols.
Reported-by: NDavid Miller <davem@davemloft.net>
Reported-by: NAnton Blanchard <anton@samba.org>
Acked-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org> # for .33.x. Does not apply cleanly, needs backport.
LKML-Reference: <20100225155740.GB8553@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      628ada0c
  15. 04 2月, 2010 2 次提交
    • K
      perf annotate: Fix it for non-prelinked *.so · 7a2b6209
      由 Kirill Smelkov 提交于 
      The problem was we were incorrectly calculating objdump
addresses for sym->start and sym->end, look:

For simple ET_DYN type DSO (*.so) with one function, objdump -dS
output is something like this:

    000004ac <my_strlen>:
    int my_strlen(const char *s)
     4ac:   55                      push   %ebp
     4ad:   89 e5                   mov    %esp,%ebp
     4af:   83 ec 10                sub    $0x10,%esp
    {

i.e. we have relative-to-dso-mapping IPs (=RIP) there.

For ET_EXEC type and probably for prelinked libs as well (sorry
can't test - I don't use prelink) objdump outputs absolute IPs,
e.g.

    08048604 <zz_strlen>:
    extern "C"
    int zz_strlen(const char *s)
     8048604:       55                      push   %ebp
     8048605:       89 e5                   mov    %esp,%ebp
     8048607:       83 ec 10                sub    $0x10,%esp
    {

So, if sym->start is always relative to dso mapping(*), we'll
have to unmap it for ET_EXEC like cases, and leave as is for
ET_DYN cases.

(*) and it is - we've explicitely made it relative. Look for
    adjust_symbols handling in dso__load_sym()

Previously we were always unmapping sym->start and for ET_DYN
dsos resulting addresses were wrong, and so objdump output was
empty.

The end result was that perf annotate output for symbols from
non-prelinked *.so had always 0.00% percents only, which is
wrong.

To fix it, let's introduce a helper for converting rip to
objdump address, and also let's document what map_ip() and
unmap_ip() do -- I had to study sources for several hours to
understand it.
Signed-off-by: NKirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1265223128-11786-8-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7a2b6209
    • A
      perf tools: Adjust some verbosity levels · 29a9f66d
      由 Arnaldo Carvalho de Melo 提交于 
      Not to pollute too much 'perf annotate' debugging sessions.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-7-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      29a9f66d
  17. 16 1月, 2010 1 次提交
  19. 28 12月, 2009 1 次提交
  21. 16 12月, 2009 3 次提交
  23. 15 12月, 2009 2 次提交
  25. 14 12月, 2009 8 次提交
  27. 12 12月, 2009 1 次提交
    • A
      perf tools: Introduce perf_session class · 94c744b6
      由 Arnaldo Carvalho de Melo 提交于 
      That does all the initialization boilerplate, opening the file,
reading the header, checking if it is valid, etc.

And that will as well have the threads list, kmap (now) global
variable, etc, so that we can handle two (or more) perf.data files
describing sessions to compare.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260573842-19720-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      94c744b6
  29. 01 12月, 2009 1 次提交
    • L
      perf annotate: Fix perf data parsing · bab81b62
      由 Li Zefan 提交于 
      perf-annotate doesn't parse perf.data correctly in that it
doesn't read perf header. Fix this by using
mmap_dispatch_perf_file().

Before:

TOTAL events:      17565
      MMAP events:       3221
      LOST events:         10
      COMM events:        235
      EXIT events:          2
  THROTTLE events:          1
UNTHROTTLE events:          2
      FORK events:         10
      READ events:          1
    SAMPLE events:      14083

After:

TOTAL events:      17290
      MMAP events:       3203
      LOST events:          0
      COMM events:        234
      EXIT events:          1
  THROTTLE events:          0
UNTHROTTLE events:          0
      FORK events:          0
      READ events:          0
    SAMPLE events:      13852
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <4B14B201.9030708@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      bab81b62
  31. 28 11月, 2009 6 次提交
    • A
      perf tools: Consolidate symbol resolving across all tools · 1ed091c4
      由 Arnaldo Carvalho de Melo 提交于 
      Now we have a very high level routine for simple tools to
process IP sample events:

	int event__preprocess_sample(const event_t *self,
				     struct addr_location *al,
				     symbol_filter_t filter)

It receives the event itself and will insert new threads in the
global threads list and resolve the map and symbol, filling all
this info into the new addr_location struct, so that tools like
annotate and report can further process the event by creating
hist_entries in their specific way (with or without callgraphs,
etc).

It in turn uses the new next layer function:

	void thread__find_addr_location(struct thread *self, u8 cpumode,
					enum map_type type, u64 addr,
					struct addr_location *al,
					symbol_filter_t filter)

This one will, given a thread (userspace or the kernel kthread
one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE
too in the near future) at the given cpumode, taking vdsos into
account (userspace hit, but kernel symbol) and will fill all
these details in the addr_location given.

Tools that need a more compact API for plain function
resolution, like 'kmem', can use this other one:

	struct symbol *thread__find_function(struct thread *self, u64 addr,
					     symbol_filter_t filter)

So, to resolve a kernel symbol, that is all the 'kmem' tool
needs, its just a matter of calling:

	sym = thread__find_function(kthread, addr, NULL);

The 'filter' parameter is needed because we do lazy
parsing/loading of ELF symtabs or /proc/kallsyms.

With this we remove more code duplication all around, which is
always good, huh? :-)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1ed091c4
    • A
      perf tools: Reorganize event processing routines, lotsa dups killed · 62daacb5
      由 Arnaldo Carvalho de Melo 提交于 
      While implementing event__preprocess_sample, that will do all of
the symbol lookup in one convenient function, I noticed that
util/process_event.[ch] were not being used at all, then started
looking if there were other functions that could be shared
and...

All those functions really don't need to receive offset + head,
the only thing they did was common to all of them, so do it at
one place instead.

Stats about number of each type of event processed now is done
in a central place.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-11-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      62daacb5
    • A
      perf symbols: Support multiple symtabs in struct thread · 95011c60
      由 Arnaldo Carvalho de Melo 提交于 
      Making the routines that were so far specific to the kernel maps
useful for all threads.

This is done by making the kernel maps be contained in a kernel
"thread".

This gets the kernel specific routines closer to the userspace
counterparts, which will help in reducing the boilerplate for
resolving a symbol, as will be demonstrated in the next patches.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-9-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      95011c60
    • A
      perf symbols: Better support for multiple symbol tables per dso · 6a4694a4
      由 Arnaldo Carvalho de Melo 提交于 
      By using an array of rb_roots in struct dso we can, from a
struct map instance to get the right symbol rb_tree more easily.
This way we can have just one symbol lookup method for struct
map instances, map__find_symbol, instead of one per symtab type
(functions, variables).
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-6-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      6a4694a4
    • A
      perf symbols: Unexport kernel_map__functions · 605ca4ba
      由 Arnaldo Carvalho de Melo 提交于 
      perf annotate was the only user, and it doesn't really need it.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-4-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      605ca4ba
    • A
      perf symbols: Rename kernel_mapto kernel_map[s]__functions · 61f37a82
      由 Arnaldo Carvalho de Melo 提交于 
      As we'll have kernel_map[s]__variables too.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      61f37a82
  33. 24 11月, 2009 4 次提交
    • A
      perf symbols: Rename find_symbol routines to find_function · fcf1203a
      由 Arnaldo Carvalho de Melo 提交于 
      Paving the way for supporting variable in adition to function
symbols.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259074912-5924-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      fcf1203a
    • A
      perf symbols: Simplify symbol machinery setup · b32d133a
      由 Arnaldo Carvalho de Melo 提交于 
      And also express its configuration toggles via a struct.

Now all one has to do is to call symbol__init(NULL) if the
defaults are OK, or pass a struct symbol_conf pointer with the
desired configuration.

If a tool uses kernel_maps__find_symbol() to look at the kernel
and modules mappings for a symbol but didn't call symbol__init()
first, that will generate a one time warning too, alerting the
subcommand developer that symbol__init() must be called.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259071517-3242-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b32d133a
    • J
      perf tools: Use common process_event functions for annotate and report · e74328d3
      由 John Kacur 提交于 
      Prevent bit-rot in perf-annotate by using common functions where
possible. Here we create process_events.[ch] to hold the common
functions.
Signed-off-by: NJohn Kacur <jkacur@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: acme@redhat.com
LKML-Reference: <1259073301-11506-3-git-send-email-jkacur@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e74328d3
    • A
      perf symbols: Look for vmlinux in more places · cc612d81
      由 Arnaldo Carvalho de Melo 提交于 
      Now that we can check the buildid to see if it really matches,
this can be done safely:

  vmlinux
  /boot/vmlinux
  /boot/vmlinux-<uts.release>
  /lib/modules/<uts.release>/build/vmlinux
  /usr/lib/debug/lib/modules/%s/vmlinux

More can be added - if you know about distros that put the
vmlinux somewhere else please let us know.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259001550-8194-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      cc612d81
  35. 21 11月, 2009 1 次提交
    • A
      perf symbols: Do lazy symtab loading for the kernel & modules too · c338aee8
      由 Arnaldo Carvalho de Melo 提交于 
      Just like we do with the other DSOs. This also simplifies the
kernel_maps setup process, now all that the tools need to do is
to call kernel_maps__init and the maps for the modules and
kernel will be created, then, later, when
kernel_maps__find_symbol() is used, it will also call
maps__find_symbol that already checks if the symtab was loaded,
loading it if needed.

Now if one does 'perf top --hide_kernel_symbols' we won't pay
the price of loading the (many) symbols in /proc/kallsyms or
vmlinux.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-4-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c338aee8