Doing a proper block dev ->readpages() speeds up the crazy dump(8)
approach of using interleaved process IO.
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

fsync_bdev() export and a bunch of stubs for !CONFIG_BLOCK case had
been left behind
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Move some block device related code out from buffer.c and put it in
block_dev.c. I'm trying to move non-buffer_head code out of buffer.c
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The ioctls for the generic freeze feature are below.
o Freeze the filesystem
  int ioctl(int fd, int FIFREEZE, arg)
    fd: The file descriptor of the mountpoint
    FIFREEZE: request code for the freeze
    arg: Ignored
    Return value: 0 if the operation succeeds. Otherwise, -1

o Unfreeze the filesystem
  int ioctl(int fd, int FITHAW, arg)
    fd: The file descriptor of the mountpoint
    FITHAW: request code for unfreeze
    arg: Ignored
    Return value: 0 if the operation succeeds. Otherwise, -1
    Error number: If the filesystem has already been unfrozen,
                  errno is set to EINVAL.

[akpm@linux-foundation.org: fix CONFIG_BLOCK=n]
Signed-off-by: NTakashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: NMasayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently md devices, once created, never disappear until the module
is unloaded.  This is essentially because the gendisk holds a
reference to the mddev, and the mddev holds a reference to the
gendisk, this a circular reference.

If we drop the reference from mddev to gendisk, then we need to ensure
that the mddev is destroyed when the gendisk is destroyed.  However it
is not possible to hook into the gendisk destruction process to enable
this.

So we drop the reference from the gendisk to the mddev and destroy the
gendisk when the mddev gets destroyed.  However this has a
complication.
Between the call
   __blkdev_get->get_gendisk->kobj_lookup->md_probe
and the call
   __blkdev_get->md_open

there is no obvious way to hold a reference on the mddev any more, so
unless something is done, it will disappear and gendisk will be
destroyed prematurely.

Also, once we decide to destroy the mddev, there will be an unlockable
moment before the gendisk is unlinked (blk_unregister_region) during
which a new reference to the gendisk can be created.  We need to
ensure that this reference can not be used.  i.e. the ->open must
fail.

So:
 1/  in md_probe we set a flag in the mddev (hold_active) which
     indicates that the array should be treated as active, even
     though there are no references, and no appearance of activity.
     This is cleared by md_release when the device is closed if it
     is no longer needed.
     This ensures that the gendisk will survive between md_probe and
     md_open.

 2/  In md_open we check if the mddev we expect to open matches
     the gendisk that we did open.
     If there is a mismatch we return -ERESTARTSYS and modify
     __blkdev_get to retry from the top in that case.
     In the -ERESTARTSYS sys case we make sure to wait until
     the old gendisk (that we succeeded in opening) is really gone so
     we loop at most once.

Some udev configurations will always open an md device when it first
appears.   If we allow an md device that was just created by an open
to disappear on an immediate close, then this can race with such udev
configurations and result in an infinite loop the device being opened
and closed, then re-open due to the 'ADD' even from the first open,
and then close and so on.
So we make sure an md device, once created by an open, remains active
at least until some md 'ioctl' has been made on it.  This means that
all normal usage of md devices will allow them to disappear promptly
when not needed, but the worst that an incorrect usage will do it
cause an inactive md device to be left in existence (it can easily be
removed).

As an array can be stopped by writing to a sysfs attribute
  echo clear > /sys/block/mdXXX/md/array_state
we need to use scheduled work for deleting the gendisk and other
kobjects.  This allows us to wait for any pending gendisk deletion to
complete by simply calling flush_scheduled_work().
Signed-off-by: NNeilBrown <neilb@suse.de>

Fix function parameter name in kernel-doc:

Warning(linux-2.6.28-git5//fs/block_dev.c:1272): No description found for parameter 'pathname'
Warning(linux-2.6.28-git5//fs/block_dev.c:1272): Excess function parameter 'path' description in 'lookup_bdev'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement blkdev_releasepage() to release the buffer_heads and pages
after we release private data belonging to a mounted filesystem.

Cc: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

- iget5_locked in bdget really needs blockdev_superblock, instead of
  bd_mnt, so bd_mnt could be just a local variable;

- blockdev_superblock really needs __read_mostly, while local var bd_mnt
  not;

- make use of sb_is_blkdev_sb in bd_forget, instead of direct reference
  to blockdev_superblock.
Signed-off-by: NDenis ChengRq <crquan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Update FMODE_NDELAY before each ioctl call so that we can kill the
magic FMODE_NDELAY_NOW.  It would be even better to do this directly
in setfl(), but for that we'd need to have FMODE_NDELAY for all files,
not just block special files.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The way the bd_claim for the FMODE_EXCL case is implemented is rather
confusing.  Clean it up to the most logical style.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Commit 0762b8bd moved disk_get_part()
in front of recursive get on the whole disk, which caused removable
devices to try disk_get_part() before rescanning after a new media is
inserted, which might fail legit open attempts or give the old
partition.

This patch fixes the problem by moving disk_get_part() after
__blkdev_get() on the whole disk.

This problem was spotted by Borislav Petkov.
Signed-off-by: NTejun Heo <tj@kernel.org>
Tested-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

more nameidata eviction
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Now we can switch blkdev_ioctl() block_device/mode
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* get rid of fake struct file/struct dentry in __blkdev_get()
* merge __blkdev_get() and do_open()
* get rid of flags argument of blkdev_get()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

replace open_bdev_excl/close_bdev_excl with variants taking fmode_t.
superblock gets the value used to mount it stored in sb->s_mode
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
	1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both.  That's this changeset.
	2) for each driver convert to new methods.  *ALL* drivers
are converted in this series.
	3) kill the old (renamed) methods.

Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain.  The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.

New methods:
	open(bdev, mode)
	release(disk, mode)
	ioctl(bdev, mode, cmd, arg)		/* Called without BKL */
	compat_ioctl(bdev, mode, cmd, arg)
	locked_ioctl(bdev, mode, cmd, arg)	/* Called with BKL, legacy */
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

store needed information in f_mode
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Fix block kernel-doc warnings:

Warning(linux-2.6.27-git4//fs/block_dev.c:1272): No description found for parameter 'path'
Warning(linux-2.6.27-git4//block/blk-core.c:1021): No description found for parameter 'cpu'
Warning(linux-2.6.27-git4//block/blk-core.c:1021): No description found for parameter 'part'
Warning(/var/linsrc/linux-2.6.27-git4//block/genhd.c:544): No description found for parameter 'partno'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Fix kernel-doc in new functions:

Error(mmotm-2008-1002-1617//fs/block_dev.c:895): duplicate section name 'Description'
Error(mmotm-2008-1002-1617//fs/block_dev.c:924): duplicate section name 'Description'
Warning(mmotm-2008-1002-1617//fs/block_dev.c:1282): No description found for parameter 'pathname'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
cc: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

We call flush_disk() to make sure the buffer cache for the disk is
flushed after a disk resize. There are two resize cases, growing and
shrinking. Given that users can shrink/then grow a disk before
revalidate_disk() is called, we treat the grow case identically to
shrinking. We need to flush the buffer cache after an online shrink
because, as James Bottomley puts it,

     The two use cases for shrinking I can see are

     1. planned: the fs is already shrunk to within the new boundaries
        and all data is relocated, so invalidate is fine (any dirty
        buffers that might exist in the shrunk region are there only
        because they were relocated but not yet written to their
        original location).
     2. unplanned:  In this case, the fs is probably toast, so whether
        we invalidate or not isn't going to make a whole lot of
        difference; it's still going to try to read or write from
        sectors beyond the new size and get I/O errors.

Immediately invalidating shrunk disks will cause errors for outstanding
I/Os for reads/write beyond the new end of the disk to be generated
earlier then if we waited for the normal buffer cache operation. It also
removes a potential security hole where we might keep old data around
from beyond the end of the shrunk disk if the disk was not invalidated.
Signed-off-by: NAndrew Patterson <andrew.patterson@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

We need to be able to flush the buffer cache for for more than
just when a disk is changed, so we factor out common cache flush code
in check_disk_change() to an internal flush_disk() routine.  This
routine will then be used for both disk changes and disk resizes (in a
later patch).

Include the disk name in the text indicating that there are busy
inodes on the device and increase the KERN severity of the message.
Signed-off-by: NAndrew Patterson <andrew.patterson@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The revalidate_disk routine now checks if a disk has been resized by
comparing the gendisk capacity to the bdev inode size.  If they are
different (usually because the disk has been resized underneath the kernel)
the bdev inode size is adjusted to match the capacity.
Signed-off-by: NAndrew Patterson <andrew.patterson@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This is a wrapper for the lower-level revalidate_disk call-backs such
as sd_revalidate_disk(). It allows us to perform pre and post
operations when calling them.

We will use this wrapper in a later patch to adjust block device sizes
after an online resize (a _post_ operation).
Signed-off-by: NAndrew Patterson <andrew.patterson@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Till now, bdev->bd_part is set only if the bdev was for parts other
than part0.  This patch makes bdev->bd_part always set so that code
paths don't have to differenciate common handling.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Move disk->holder_dir to part0->holder_dir.  Kill now mostly
superflous bdev_get_holder().

While at it, kill superflous kobject_get/put() around holder_dir,
slave_dir and cmd_filter creation and collapse
disk_sysfs_add_subdirs() into register_disk().  These serve no purpose
but obfuscating the code.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

genhd and partition code handled disk and partitions separately.  All
information about the whole disk was in struct genhd and partitions in
struct hd_struct.  However, the whole disk (part0) and other
partitions have a lot in common and the data structures end up having
good number of common fields and thus separate code paths doing the
same thing.  Also, the partition array was indexed by partno - 1 which
gets pretty confusing at times.

This patch introduces partition 0 and makes the partition array
indexed by partno.  Following patches will unify the handling of disk
and parts piece-by-piece.

This patch also implements disk_partitionable() which tests whether a
disk is partitionable.  With coming dynamic partition array change,
the most common usage of disk_max_parts() will be testing whether a
disk is partitionable and the number of max partitions will become
much less important.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Implement {disk|part}_to_dev() and use them to access generic device
instead of directly dereferencing {disk|part}->dev.  To make sure no
user is left behind, rename generic devices fields to __dev.

This is in preparation of unifying partition 0 handling with other
partitions.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

disk->part[] is protected by its matching bdev's lock.  However,
non-critical accesses like collecting stats and printing out sysfs and
proc information used to be performed without any locking.  As
partitions can come and go dynamically, partitions can go away
underneath those non-critical accesses.  As some of those accesses are
writes, this theoretically can lead to silent corruption.

This patch fixes the race by using RCU for the partition array and dev
reference counter to hold partitions.

* Rename disk->part[] to disk->__part[] to make sure no one outside
  genhd layer proper accesses it directly.

* Use RCU for disk->__part[] dereferencing.

* Implement disk_{get|put}_part() which can be used to get and put
  partitions from gendisk respectively.

* Iterators are implemented to help iterate through all partitions
  safely.

* Functions which require RCU readlock are marked with _rcu suffix.

* Use disk_put_part() in __blkdev_put() instead of directly putting
  the contained kobject.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

* Implement disk_devt() and part_devt() and use them to directly
  access devt instead of computing it from ->major and ->first_minor.

  Note that all references to ->major and ->first_minor outside of
  block layer is used to determine devt of the disk (the part0) and as
  ->major and ->first_minor will continue to represent devt for the
  disk, converting these users aren't strictly necessary.  However,
  convert them for consistency.

* Implement disk_max_parts() to avoid directly deferencing
  genhd->minors.

* Update bdget_disk() such that it doesn't assume consecutive minor
  space.

* Move devt computation from register_disk() to add_disk() and make it
  the only one (all other usages use the initially determined value).

These changes clean up the code and will help disk->part dereference
fix and extended block device numbers.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

In hd_struct, @partno is used to denote partition number and a number
of other places use @part to denote hd_struct.  Functions use @part
and @index instead.  This causes confusion and makes it difficult to
use consistent variable names for hd_struct.  Always use @partno if a
variable represents partition number.

Also, print out functions use @f or @part for seq_file argument.  Use
@seqf uniformly instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

No need to open-code it...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Callers expect it to drop reference to bdev on all failure exits.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres.  Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.

Non-trivial places are:
	arch/powerpc/mm/init_64.c
	arch/powerpc/mm/hugetlbpage.c

This is flag day, yes.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

devcgroup_inode_permission() expects MAY_FOO, not FMODE_FOO; kindly
keep your misdesign consistent if you positively have to inflict it
on the kernel.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Currently even if a task sits in an all-denied cgroup it can still mount
any block device in any mode it wants.

Put a proper check in do_open for block device to prevent this.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Tested-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit b2e895db #if 0'ed this code stating:

<--  snip  -->

    [PATCH] revert blockdev direct io back to 2.6.19 version

    Andrew Vasquez is reporting as-iosched oopses and a 65% throughput
    slowdown due to the recent special-casing of direct-io against
    blockdevs.  We don't know why either of these things are occurring.

    The patch minimally reverts us back to the 2.6.19 code for a 2.6.20
    release.

<--  snip  -->

It has since been dead code, and unless someone wants to revive it now
it's time to remove it.

This patch also makes bio_release_pages() static again and removes the
ki_bio_count member from struct kiocb, reverting changes that had been
done for this dead code.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJens Axboe <axboe@carl.home.kernel.dk>

This patch makes the needlessly global struct def_blk_aops static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJens Axboe <axboe@carl.home.kernel.dk>