Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 165
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 08 9月, 2018 1 次提交
    • N
      x86/mm: Use WRITE_ONCE() when setting PTEs · 9bc4f28a
      由 Nadav Amit 提交于 
      When page-table entries are set, the compiler might optimize their
assignment by using multiple instructions to set the PTE. This might
turn into a security hazard if the user somehow manages to use the
interim PTE. L1TF does not make our lives easier, making even an interim
non-present PTE a security hazard.

Using WRITE_ONCE() to set PTEs and friends should prevent this potential
security hazard.

I skimmed the differences in the binary with and without this patch. The
differences are (obviously) greater when CONFIG_PARAVIRT=n as more
code optimizations are possible. For better and worse, the impact on the
binary with this patch is pretty small. Skimming the code did not cause
anything to jump out as a security hazard, but it seems that at least
move_soft_dirty_pte() caused set_pte_at() to use multiple writes.
Signed-off-by: NNadav Amit <namit@vmware.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180902181451.80520-1-namit@vmware.com
      9bc4f28a
  3. 06 9月, 2018 1 次提交
  5. 03 9月, 2018 1 次提交
    • R
      x86: Fix kernel-doc atomic.h warnings · 4331f4d5
      由 Randy Dunlap 提交于 
      Fix kernel-doc warnings in arch/x86/include/asm/atomic.h that are caused by
having a #define macro between the kernel-doc notation and the function
name.  Fixed by moving the #define macro to after the function
implementation.

Make the same change for atomic64_{32,64}.h for consistency even though
there were no kernel-doc warnings found in these header files, but there
would be if they were used in generation of documentation.

Fixes these kernel-doc warnings:

../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'i' description in 'arch_atomic_sub_and_test'
../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'v' description in 'arch_atomic_sub_and_test'
../arch/x86/include/asm/atomic.h:96: warning: Excess function parameter 'v' description in 'arch_atomic_inc'
../arch/x86/include/asm/atomic.h:109: warning: Excess function parameter 'v' description in 'arch_atomic_dec'
../arch/x86/include/asm/atomic.h:124: warning: Excess function parameter 'v' description in 'arch_atomic_dec_and_test'
../arch/x86/include/asm/atomic.h:138: warning: Excess function parameter 'v' description in 'arch_atomic_inc_and_test'
../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'i' description in 'arch_atomic_add_negative'
../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'v' description in 'arch_atomic_add_negative'

Fixes: 18cc1814 ("atomics/treewide: Make test ops optional")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/0a1e678d-c8c5-b32c-2640-ed4e94d399d2@infradead.org
      4331f4d5
  7. 02 9月, 2018 1 次提交
  9. 31 8月, 2018 2 次提交
  11. 30 8月, 2018 2 次提交
  13. 27 8月, 2018 1 次提交
    • A
      x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+ · cc51e542
      由 Andi Kleen 提交于 
      On Nehalem and newer core CPUs the CPU cache internally uses 44 bits
physical address space. The L1TF workaround is limited by this internal
cache address width, and needs to have one bit free there for the
mitigation to work.

Older client systems report only 36bit physical address space so the range
check decides that L1TF is not mitigated for a 36bit phys/32GB system with
some memory holes.

But since these actually have the larger internal cache width this warning
is bogus because it would only really be needed if the system had more than
43bits of memory.

Add a new internal x86_cache_bits field. Normally it is the same as the
physical bits field reported by CPUID, but for Nehalem and newerforce it to
be at least 44bits.

Change the L1TF memory size warning to use the new cache_bits field to
avoid bogus warnings and remove the bogus comment about memory size.

Fixes: 17dbca11 ("x86/speculation/l1tf: Add sysfs reporting for l1tf")
Reported-by: NGeorge Anchev <studio@anchev.net>
Reported-by: NChristopher Snowhill <kode54@gmail.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Michael Hocko <mhocko@suse.com>
Cc: vbabka@suse.cz
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180824170351.34874-1-andi@firstfloor.org
      cc51e542
  15. 24 8月, 2018 2 次提交
  17. 23 8月, 2018 2 次提交
    • P
      x86/mm/tlb: Revert the recent lazy TLB patches · 52a288c7
      由 Peter Zijlstra 提交于 
      Revert commits:

  95b0e635 x86/mm/tlb: Always use lazy TLB mode
  64482aaf x86/mm/tlb: Only send page table free TLB flush to lazy TLB CPUs
  ac031589 x86/mm/tlb: Make lazy TLB mode lazier
  61d0beb5 x86/mm/tlb: Restructure switch_mm_irqs_off()
  2ff6ddf1 x86/mm/tlb: Leave lazy TLB mode at page table free time

In order to simplify the TLB invalidate fixes for x86 and unify the
parts that need backporting.  We'll try again later.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NRik van Riel <riel@surriel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      52a288c7
    • A
      module: use relative references for __ksymtab entries · 7290d580
      由 Ard Biesheuvel 提交于 
      An ordinary arm64 defconfig build has ~64 KB worth of __ksymtab entries,
each consisting of two 64-bit fields containing absolute references, to
the symbol itself and to a char array containing its name, respectively.

When we build the same configuration with KASLR enabled, we end up with an
additional ~192 KB of relocations in the .init section, i.e., one 24 byte
entry for each absolute reference, which all need to be processed at boot
time.

Given how the struct kernel_symbol that describes each entry is completely
local to module.c (except for the references emitted by EXPORT_SYMBOL()
itself), we can easily modify it to contain two 32-bit relative references
instead.  This reduces the size of the __ksymtab section by 50% for all
64-bit architectures, and gets rid of the runtime relocations entirely for
architectures implementing KASLR, either via standard PIE linking (arm64)
or using custom host tools (x86).

Note that the binary search involving __ksymtab contents relies on each
section being sorted by symbol name.  This is implemented based on the
input section names, not the names in the ksymtab entries, so this patch
does not interfere with that.

Given that the use of place-relative relocations requires support both in
the toolchain and in the module loader, we cannot enable this feature for
all architectures.  So make it dependent on whether
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS is defined.

Link: http://lkml.kernel.org/r/20180704083651.24360-4-ard.biesheuvel@linaro.orgSigned-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NJessica Yu <jeyu@kernel.org>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morris <james.morris@microsoft.com>
Cc: James Morris <jmorris@namei.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7290d580
  19. 22 8月, 2018 1 次提交
    • S
      KVM: vmx: Add defines for SGX ENCLS exiting · 802ec461
      由 Sean Christopherson 提交于 
      Hardware support for basic SGX virtualization adds a new execution
control (ENCLS_EXITING), VMCS field (ENCLS_EXITING_BITMAP) and exit
reason (ENCLS), that enables a VMM to intercept specific ENCLS leaf
functions, e.g. to inject faults when the VMM isn't exposing SGX to
a VM.  When ENCLS_EXITING is enabled, the VMM can set/clear bits in
the bitmap to intercept/allow ENCLS leaf functions in non-root, e.g.
setting bit 2 in the ENCLS_EXITING_BITMAP will cause ENCLS[EINIT]
to VMExit(ENCLS).

Note: EXIT_REASON_ENCLS was previously added by commit 1f519992
("KVM: VMX: add missing exit reasons").
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20180814163334.25724-2-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      802ec461
  21. 21 8月, 2018 4 次提交
  23. 18 8月, 2018 1 次提交
    • S
      x86/speculation/l1tf: Exempt zeroed PTEs from inversion · f19f5c49
      由 Sean Christopherson 提交于 
      It turns out that we should *not* invert all not-present mappings,
because the all zeroes case is obviously special.

clear_page() does not undergo the XOR logic to invert the address bits,
i.e. PTE, PMD and PUD entries that have not been individually written
will have val=0 and so will trigger __pte_needs_invert(). As a result,
{pte,pmd,pud}_pfn() will return the wrong PFN value, i.e. all ones
(adjusted by the max PFN mask) instead of zero. A zeroed entry is ok
because the page at physical address 0 is reserved early in boot
specifically to mitigate L1TF, so explicitly exempt them from the
inversion when reading the PFN.

Manifested as an unexpected mprotect(..., PROT_NONE) failure when called
on a VMA that has VM_PFNMAP and was mmap'd to as something other than
PROT_NONE but never used. mprotect() sends the PROT_NONE request down
prot_none_walk(), which walks the PTEs to check the PFNs.
prot_none_pte_entry() gets the bogus PFN from pte_pfn() and returns
-EACCES because it thinks mprotect() is trying to adjust a high MMIO
address.

[ This is a very modified version of Sean's original patch, but all
  credit goes to Sean for doing this and also pointing out that
  sometimes the __pte_needs_invert() function only gets the protection
  bits, not the full eventual pte.  But zero remains special even in
  just protection bits, so that's ok.   - Linus ]

Fixes: f22cc87f ("x86/speculation/l1tf: Invert all not present mappings")
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f19f5c49
  25. 16 8月, 2018 1 次提交
  27. 11 8月, 2018 1 次提交
    • J
      x86/mm/pti: Move user W+X check into pti_finalize() · d878efce
      由 Joerg Roedel 提交于 
      The user page-table gets the updated kernel mappings in pti_finalize(),
which runs after the RO+X permissions got applied to the kernel page-table
in mark_readonly().

But with CONFIG_DEBUG_WX enabled, the user page-table is already checked in
mark_readonly() for insecure mappings.  This causes false-positive
warnings, because the user page-table did not get the updated mappings yet.

Move the W+X check for the user page-table into pti_finalize() after it
updated all required mappings.

[ tglx: Folded !NX supported fix ]
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1533727000-9172-1-git-send-email-joro@8bytes.org
      d878efce
  29. 08 8月, 2018 2 次提交
  31. 07 8月, 2018 2 次提交
    • J
      xen: don't use privcmd_call() from xen_mc_flush() · cd913922
      由 Juergen Gross 提交于 
      Using privcmd_call() for a singleton multicall seems to be wrong, as
privcmd_call() is using stac()/clac() to enable hypervisor access to
Linux user space.

Even if currently not a problem (pv domains can't use SMAP while HVM
and PVH domains can't use multicalls) things might change when
PVH dom0 support is added to the kernel.
Reported-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
      cd913922
    • D
      x86/mm/init: Remove freed kernel image areas from alias mapping · c40a56a7
      由 Dave Hansen 提交于 
      The kernel image is mapped into two places in the virtual address space
(addresses without KASLR, of course):

	1. The kernel direct map (0xffff880000000000)
	2. The "high kernel map" (0xffffffff81000000)

We actually execute out of #2.  If we get the address of a kernel symbol,
it points to #2, but almost all physical-to-virtual translations point to

Parts of the "high kernel map" alias are mapped in the userspace page
tables with the Global bit for performance reasons.  The parts that we map
to userspace do not (er, should not) have secrets. When PTI is enabled then
the global bit is usually not set in the high mapping and just used to
compensate for poor performance on systems which lack PCID.

This is fine, except that some areas in the kernel image that are adjacent
to the non-secret-containing areas are unused holes.  We free these holes
back into the normal page allocator and reuse them as normal kernel memory.
The memory will, of course, get *used* via the normal map, but the alias
mapping is kept.

This otherwise unused alias mapping of the holes will, by default keep the
Global bit, be mapped out to userspace, and be vulnerable to Meltdown.

Remove the alias mapping of these pages entirely.  This is likely to
fracture the 2M page mapping the kernel image near these areas, but this
should affect a minority of the area.

The pageattr code changes *all* aliases mapping the physical pages that it
operates on (by default).  We only want to modify a single alias, so we
need to tweak its behavior.

This unmapping behavior is currently dependent on PTI being in place.
Going forward, we should at least consider doing this for all
configurations.  Having an extra read-write alias for memory is not exactly
ideal for debugging things like random memory corruption and this does
undercut features like DEBUG_PAGEALLOC or future work like eXclusive Page
Frame Ownership (XPFO).

Before this patch:

current_kernel:---[ High Kernel Mapping ]---
current_kernel-0xffffffff80000000-0xffffffff81000000          16M                               pmd
current_kernel-0xffffffff81000000-0xffffffff81e00000          14M     ro         PSE     GLB x  pmd
current_kernel-0xffffffff81e00000-0xffffffff81e11000          68K     ro                 GLB x  pte
current_kernel-0xffffffff81e11000-0xffffffff82000000        1980K     RW                     NX pte
current_kernel-0xffffffff82000000-0xffffffff82600000           6M     ro         PSE     GLB NX pmd
current_kernel-0xffffffff82600000-0xffffffff82c00000           6M     RW         PSE         NX pmd
current_kernel-0xffffffff82c00000-0xffffffff82e00000           2M     RW                     NX pte
current_kernel-0xffffffff82e00000-0xffffffff83200000           4M     RW         PSE         NX pmd
current_kernel-0xffffffff83200000-0xffffffffa0000000         462M                               pmd

  current_user:---[ High Kernel Mapping ]---
  current_user-0xffffffff80000000-0xffffffff81000000          16M                               pmd
  current_user-0xffffffff81000000-0xffffffff81e00000          14M     ro         PSE     GLB x  pmd
  current_user-0xffffffff81e00000-0xffffffff81e11000          68K     ro                 GLB x  pte
  current_user-0xffffffff81e11000-0xffffffff82000000        1980K     RW                     NX pte
  current_user-0xffffffff82000000-0xffffffff82600000           6M     ro         PSE     GLB NX pmd
  current_user-0xffffffff82600000-0xffffffffa0000000         474M                               pmd

After this patch:

current_kernel:---[ High Kernel Mapping ]---
current_kernel-0xffffffff80000000-0xffffffff81000000          16M                               pmd
current_kernel-0xffffffff81000000-0xffffffff81e00000          14M     ro         PSE     GLB x  pmd
current_kernel-0xffffffff81e00000-0xffffffff81e11000          68K     ro                 GLB x  pte
current_kernel-0xffffffff81e11000-0xffffffff82000000        1980K                               pte
current_kernel-0xffffffff82000000-0xffffffff82400000           4M     ro         PSE     GLB NX pmd
current_kernel-0xffffffff82400000-0xffffffff82488000         544K     ro                     NX pte
current_kernel-0xffffffff82488000-0xffffffff82600000        1504K                               pte
current_kernel-0xffffffff82600000-0xffffffff82c00000           6M     RW         PSE         NX pmd
current_kernel-0xffffffff82c00000-0xffffffff82c0d000          52K     RW                     NX pte
current_kernel-0xffffffff82c0d000-0xffffffff82dc0000        1740K                               pte

  current_user:---[ High Kernel Mapping ]---
  current_user-0xffffffff80000000-0xffffffff81000000          16M                               pmd
  current_user-0xffffffff81000000-0xffffffff81e00000          14M     ro         PSE     GLB x  pmd
  current_user-0xffffffff81e00000-0xffffffff81e11000          68K     ro                 GLB x  pte
  current_user-0xffffffff81e11000-0xffffffff82000000        1980K                               pte
  current_user-0xffffffff82000000-0xffffffff82400000           4M     ro         PSE     GLB NX pmd
  current_user-0xffffffff82400000-0xffffffff82488000         544K     ro                     NX pte
  current_user-0xffffffff82488000-0xffffffff82600000        1504K                               pte
  current_user-0xffffffff82600000-0xffffffffa0000000         474M                               pmd

[ tglx: Do not unmap on 32bit as there is only one mapping ]

Fixes: 0f561fce ("x86/pti: Enable global pages for shared areas")
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20180802225831.5F6A2BFC@viggo.jf.intel.com
      c40a56a7
  33. 06 8月, 2018 15 次提交