The NFS and NFSACL programs run on the same RPC transport.  This patch adds
 support for this by converting svc_program into a chained list of programs
 (server-side).
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Add the missing NFS3ERR_NOTSUPP error code (defined in NFSv3) to the
 system-to-protocol-error table in nfsd.  The nfsacl extension uses this error
 code.
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Acked-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Acked-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Currently we return -ENOMEM for every single failure to create a new auth.
 This is actually accurate for auth_null and auth_unix, but for auth_gss it's a
 bit confusing.

 Allow rpcauth_create (and the ->create methods) to return errors.  With this
 patch, the user may sometimes see an EINVAL instead.  Whee.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 We shouldn't be silently falling back from krb5p to krb5i.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Add nfs4_acl field to the nfs_inode, and use it to cache acls.  Only cache
 acls of size up to a page.  Also prepare for up to a page of acl data even
 when the user doesn't pass in a buffer, as when they want to get the acl
 length to decide what size buffer to allocate.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Client-side write support for NFSv4 ACLs.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Client-side support for NFSv4 acls: xdr encoding and decoding routines for
 writing acls
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Client-side support for NFSv4 ACLs.  Exports the raw xdr code via the
 system.nfs4_acl extended attribute.  It is up to userspace to decode the acl
 (and to provide correctly xdr'd acls on setxattr), and to convert to/from
 POSIX ACLs if desired.

 This patch provides only the read support.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Client-side support for NFSv4 acls: xdr encoding and decoding routines for
 reading acls
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Make nfs4 fattr size calculations more explicit, revising them downward a
 bit in the process.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Add {get,set,list}xattr methods for nfs4.  The new methods are no-ops, to be
 used by subsequent ACL patch.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 ACL support will require supporting additional inode operations in v4
 (getxattr, setxattr, listxattr).  This patch allows different protocol versions
 to support different inode operations by adding a file_inode_ops to the
 nfs_rpc_ops (to match the existing dir_inode_ops).
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Remove the wait queue, and replace the functions that depended on it
 with wait_on_bit().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 - Move NFSv4 state definitions into a private header file.
 - Clean up gunk in nfs_fs.h
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Ensure that we fix up the missing fields in the nfs_mount_data with
 sane defaults for older versions of mount, and return errors in the
 cases where we cannot.

 Convert a bunch of annoying warnings into dprintks()

 Return -EPROTONOSUPPORT rather than EIO if mount() tries to set NFSv3
 without it actually being compiled in.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Ensure that we don't create an RPC client without checking that the server
 does indeed support the RPC program + version that we are trying to set up.

 This enables us to immediately return an error to "mount" if it turns out
 that the server is only supporting NFSv2, when we requested NFSv3 or NFSv4.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 This saves us a couple of lines of cleanup code for each call.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Fix up call_header() so that it calls xdr_adjust_iovec().
 Fix calculation of the scratch buffer length in xdr_init_encode().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 If the task->tk_exit() wants to restart the RPC call after delaying
 then the current RPC code will clobber the timer by calling
 rpc_delete_timer() immediately after re-entering the loop in
 __rpc_execute().

 Problem noticed by Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Kconfig option had an extra double quote at the end of the line
which was causing in warning when building.
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

VIA82xx driver
Added dxs_support entry for  Soltek SL-K8Tpro-939.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Adds SPDIF in/out support to the SigmaTel HDA codecs. Now builds
the input mux control element names from the defcfg regs.
Signed-off-by: NMatt <matt@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

VIA82xx driver
Fixed the info text about dxs_support option (suggest dxs_support=5).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver
- Fix some invalid configurations, typos in the last patch
- Make init_verbs chainable, so that different configs can share the same
  init_verbs
- Reorder and clean up the source codes in patch_realtek.c
- Add the pin default configuration parser, used commonly in cmedia
  and realtek patch codes.
- Add 'auto' model to ALC880 for auto-configuration from BIOS
  Use this model as default, and 3-stack as fallback
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Control Midlevel
Add const prefix to snd_kcontrol_new_t pointer for better protection.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver,HDA Intel driver
Merged the work of pshou <pshou@realtek.com.tw> for the support of
more models with ALC codecs: ALC880 ASUS, Uniwill, FSC1734, generic 6-stack,
and ALC260 HP.  Tests with the real hardwares are appreciated.

The codec patch is cleaned up:  The preset configuration of codecs are
stored in the table and copied to the spec instance.

Added/fixed comments.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Allow sub_device=0 in board config check.  This means that every device
with the given sub vendor ID will match.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Clean up and fix ALC-codec support code.

The last addition of bound volume is fixed now to handle correctly
the bound 'mute switches'.  The analog loopback should work better.
The init verbs are fixed together with this change.

The numbers are replaced with macros for better readability.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>