- 13 5月, 2012 16 次提交
-
-
由 Kuninori Morimoto 提交于
This adds very basic KZM-A9-GT board (SH73a0) support Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NSimon Horman <horms@verge.net.au> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Kuninori Morimoto 提交于
If the clocks is always same value as the parent clock, we can use followparent_recalc() for .recalc Reported-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: NSimon Horman <horms@verge.net.au> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NSimon Horman <horms@verge.net.au> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NSimon Horman <horms@verge.net.au> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Kuninori Morimoto 提交于
R8A7740 USB needs many clocks for workaround, and it has confusing name "usb24s" and "usb24". This "usb24s" will be used by other clocks. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NSimon Horman <horms@verge.net.au> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Kuninori Morimoto 提交于
Current workaround of I2C on r8a7740 used mdelay(), but it was an overkill. This patch cleans up the workaround delay. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NSimon Horman <horms@verge.net.au> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NSimon Horman <horms@verge.net.au> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NSimon Horman <horms@verge.net.au> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
Update the mach-shmobile shared delay calibration code for late timers. All existing in-tree non-DT socs are however using early timers today and they are unaffected by this change. The patch modifies shmobile_setup_delay() from using lpj_fine to preset_lpj. This change allows us to preset the worst case loops-per-jiffy value to all CPU cores on the system. The old code which made use of lpj_fine did not affect the secondary CPU cores which made it impossible to boot on SMP without early timers. Needed for SMP SoCs using late timers like EMEV2 or any other mach-shmobile SMP SoC that makes use of late timers via DT. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
* renesas-dt: ARM: mach-shmobile: sh7372 generic board support via DT V2 ARM: mach-shmobile: Rework sh7372 INTCS demuxer V2 ARM: mach-shmobile: Use INTC_IRQ_PINS_16H on sh7372 ARM: mach-shmobile: Use 0x3400 as INTCS vector offset ARM: mach-shmobile: Introduce INTC_IRQ_PINS_16H ARM: mach-shmobile: Introduce shmobile_setup_delay()
-
由 Magnus Damm 提交于
Make sure L1 caches are invalidated when booting secondary cores. Needed to boot all mach-shmobile SMP systems that are using Cortex-A9 including sh73a0, r8a7779 and EMEV2. Thanks to imx and tegra guys for actual code. Signed-off-by: NMagnus Damm <damm@opensource.se> Tested-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Kuninori Morimoto 提交于
Fix SMP TWD boot regression on sh73a0 based platforms caused by: 4200b16d ARM: shmobile: convert to twd_local_timer_register() interface After the merge of the above commit it has been impossible to boot sh73a0 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The kernel crashes at smp_init_cpus() timing which is before the console has been initialized, so to the user this looks like a kernel lock up without any particular error message. This patch fixes the regression on sh73a0 by moving the TWD registration code from smp_init_cpus() to sys_timer->init() time. This patch removed shmobile_twd_init() which is no longer needed Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
Fix SMP TWD boot regression on r8a7779 based platforms caused by: 4200b16d ARM: shmobile: convert to twd_local_timer_register() interface After the merge of the above commit it has been impossible to boot r8a7779 based SoCs with SMP enabled and CONFIG_HAVE_ARM_TWD=y. The kernel crashes at smp_init_cpus() timing which is before the console has been initialized, so to the user this looks like a kernel lock up without any particular error message. This patch fixes the regression on r8a7779 by moving the TWD registration code from smp_init_cpus() to sys_timer->init() time. Signed-off-by: NMagnus Damm <damm@opensource.se> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Guennadi Liakhovetski 提交于
This also fixes the following modular mmc build failure: arch/arm/mach-shmobile/built-in.o: In function `mackerel_sdhi0_gpio_cd': pfc-sh7372.c:(.text+0x1138): undefined reference to `mmc_detect_change' on this platform by eliminating the use of an inline function, which calls into the mmc core. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: NSimon Horman <horms@verge.net.au> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Guennadi Liakhovetski 提交于
This also fixes the following modular mmc build failure: arch/arm/mach-shmobile/built-in.o: In function `ag5evm_sdhi0_gpio_cd': pfc-sh73a0.c:(.text+0x7c0): undefined reference to `mmc_detect_change' on this platform by eliminating the use of an inline function, which calls into the mmc core. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: NSimon Horman <horms@verge.net.au> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 07 5月, 2012 4 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes form Peter Anvin * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver x86, relocs: Remove an unused variable asm-generic: Use __BITS_PER_LONG in statfs.h x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "The big ones here are a memory leak we introduced in rc1, and a scheduling while atomic if the transid on disk doesn't match the transid we expected. This happens for corrupt blocks, or out of date disks. It also fixes up the ioctl definition for our ioctl to resolve logical inode numbers. The __u32 was a merging error and doesn't match what we ship in the progs." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: avoid sleeping in verify_parent_transid while atomic Btrfs: fix crash in scrub repair code when device is missing btrfs: Fix mismatching struct members in ioctl.h Btrfs: fix page leak when allocing extent buffers Btrfs: Add properly locking around add_root_to_dirty_list
-
由 Al Viro 提交于
Setting TIF_IA32 in load_aout_binary() used to be enough; these days TASK_SIZE is controlled by TIF_ADDR32 and that one doesn't get set there. Switch to use of set_personality_ia32()... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 5月, 2012 6 次提交
-
-
由 Chris Mason 提交于
verify_parent_transid needs to lock the extent range to make sure no IO is underway, and so it can safely clear the uptodate bits if our checks fail. But, a few callers are using it with spinlocks held. Most of the time, the generation numbers are going to match, and we don't want to switch to a blocking lock just for the error case. This adds an atomic flag to verify_parent_transid, and changes it to return EAGAIN if it needs to block to properly verifiy things. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha由 Linus Torvalds 提交于
Pull alpha fixes from Matt Turner: "My alpha tree is back up (after taking quite some time to get my GPG key signed). It contains just some simple fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: silence 'const' warning in sys_marvel.c alpha: include module.h to fix modpost on Tsunami alpha: properly define get/set_rtc_time on Marvel/SMP alpha: VGA_HOSE depends on VGA_CONSOLE
-
由 Jiri Slaby 提交于
The test in pdc_console_tty_close '!tty->count' was always wrong because tty->count is decremented after tty->ops->close is called and thus can never be zero. Hence the 'then' branch was never executed and the timer never deleted. This did not matter until commit 5dd5bc40 ("TTY: pdc_cons, use tty_port"). There we needed to set TTY in tty_port to NULL, but this never happened due to the bug above. So change the test to really trigger at the last close by changing the condition to 'tty->count == 1'. Well, the driver should not touch tty->count at all. It should use tty_port->count and count open count there itself. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Reported-and-tested-by: NMikulas Patocka <mpatocka@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound sound fixes from Takashi Iwai: "As good as nothing exciting here; just a few trivial fixes for various ASoC stuff." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: omap-pcm: Free dma buffers in case of error. ASoC: s3c2412-i2s: Fix dai registration ASoC: wm8350: Don't use locally allocated codec struct ASoC: tlv312aic23: unbreak resume ASoC: bf5xx-ssm2602: Set DAI format ASoC: core: check of_property_count_strings failure ASoC: dt: sgtl5000.txt: Add description for 'reg' field ASoC: wm_hubs: Make sure we don't disable differential line outputs
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux由 Linus Torvalds 提交于
Pull an ACPI patch from Len Brown: "It fixes a D3 issue new in 3.4-rc1." By Lin Ming via Len Brown: * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: ACPI: Fix D3hot v D3cold confusion
-
由 Sasha Levin 提交于
Currently, we'll try mounting any device who's major device number is UNNAMED_MAJOR as NFS root. This would happen for non-NFS devices as well (such as 9p devices) but it wouldn't cause any issues since mounting the device as NFS would fail quickly and the code proceeded to doing the proper mount: [ 101.522716] VFS: Unable to mount root fs via NFS, trying floppy. [ 101.534499] VFS: Mounted root (9p filesystem) on device 0:18. Commit 6829a048102a ("NFS: Retry mounting NFSROOT") introduced retries when mounting NFS root, which means that now we don't immediately fail and instead it takes an additional 90+ seconds until we stop retrying, which has revealed the issue this patch fixes. This meant that it would take an additional 90 seconds to boot when we're not using a device type which gets detected in order before NFS. This patch modifies the NFS type check to require device type to be 'Root_NFS' instead of requiring the device to have an UNNAMED_MAJOR major. This makes boot process cleaner since we now won't go through the NFS mounting code at all when the device isn't an NFS root ("/dev/nfs"). Signed-off-by: NSasha Levin <levinsasha928@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 5月, 2012 14 次提交
-
-
由 Takashi Iwai 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound由 Takashi Iwai 提交于
ASoC: Updates for 3.4 Nothing terribly exciting here, a bunch of small and simple fixes scattered around the place.
-
由 Lin Ming 提交于
Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot in some places, but D3cold in other places. After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD; and all references to D3hot use ACPI_STATE_D3_HOT. ACPI's _PR3 method is used to enter both D3hot and D3cold states. What distinguishes D3hot from D3cold is the presence _PR3 (Power Resources for D3hot) If these resources are all ON, then the state is D3hot. If _PR3 is not present, or all _PR0 resources for the devices are OFF, then the state is D3cold. This patch applies after Linux-3.4-rc1. A future syntax cleanup may remove ACPI_STATE_D3 to emphasize that it always means ACPI_STATE_D3_COLD. Signed-off-by: NLin Ming <ming.m.lin@intel.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Reviewed-by: NAaron Lu <aaron.lu@amd.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Greg Kroah-Hartman 提交于
Commit ec81aecb ("hfs: fix a potential buffer overflow") fixed a few potential buffer overflows in the hfs filesystem. But as Timo Warns pointed out, these changes also need to be made on the hfsplus filesystem as well. Reported-by: NTimo Warns <warns@pre-sense.de> Acked-by: NWANG Cong <amwang@redhat.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Sage Weil <sage@newdream.net> Cc: Eugene Teo <eteo@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dave Anderson <anderson@redhat.com> Cc: stable <stable@vger.kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Thomas Gleixner. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtc: Fix possible null pointer dereference in rtc-mpc5121.c
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French. * git://git.samba.org/sfrench/cifs-2.6: fs/cifs: fix parsing of dfs referrals cifs: make sure we ignore the credentials= and cred= options [CIFS] Update cifs version to 1.78 cifs - check S_AUTOMOUNT in revalidate cifs: add missing initialization of server->req_lock cifs: don't cap ra_pages at the same level as default_backing_dev_info CIFS: Fix indentation in cifs_show_options
-
由 Dave Jones 提交于
Remove myself as cpufreq maintainer. x86 driver changes can go through the regular x86/ACPI trees. ARM driver changes through the ARM trees. cpufreq core changes are rare these days, and can just go to lkml/direct. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The normal read_seqcount_begin() function will wait for any current writers to exit their critical region by looping until the sequence count is even. That "wait for sequence count to stabilize" is the right thing to do if the read-locker will just retry the whole operation on contention: no point in doing a potentially expensive reader sequence if we know at the beginning that we'll just end up re-doing it all. HOWEVER. Some users don't actually retry the operation, but instead will abort and do the operation with proper locking. So the sequence count case may be the optimistic quick case, but in the presense of writers you may want to do full locking in order to guarantee forward progress. The prime example of this would be the RCU name lookup. And in that case, you may well be better off without the "retry early", and are in a rush to instead get to the failure handling. Thus this "raw" interface that just returns the sequence number without testing it - it just forces the low bit to zero so that read_seqcount_retry() will always fail such a "active concurrent writer" scenario. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
We really need to use a ACCESS_ONCE() on the sequence value read in __read_seqcount_begin(), because otherwise the compiler might end up reloading the value in between the test and the return of it. As a result, it might end up returning an odd value (which means that a write is in progress). If the reader is then fast enough that that odd value is still the current one when the read_seqcount_retry() is done, we might end up with a "successful" read sequence, even despite the concurrent write being active. In practice this probably never really happens - there just isn't anything else going on around the read of the sequence count, and the common case is that we end up having a read barrier immediately afterwards. So the code sequence in which gcc might decide to reaload from memory is small, and there's no reason to believe it would ever actually do the reload. But if the compiler ever were to decide to do so, it would be incredibly annoying to debug. Let's just make sure. Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yong Wang 提交于
So that the power button still wakes up the platform. Signed-off-by: NPierre Tardy <pierre.tardy@intel.com> Link: http://lkml.kernel.org/r/20120504210244.F2EA5A018B@akpm.mtv.corp.google.comTested-by: NKangkai Yin <kangkai.yin@intel.com> Tested-by: NYong Wang <yong.y.wang@intel.com> Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Bjarke Istrup Pedersen 提交于
It seems that there was an error with the active_low = 1 for the LED, since it should be set to 0 (meaning that active is high, since 0 is false, hence the confusion. The wiki article about it confuses it, since it contradicts itself, regarding what turns on the LED. I have tested 3.4-rc2 on my net5501 with this patch, and it makes the LED behave correctly, where "none" turns it off, and "default-on" turns it on, when echoed onto the trigger "file" in /sys/class/leds. Signed-off-by: NBjarke Istrup Pedersen <gurligebis@gentoo.org> Link: http://lkml.kernel.org/r/20120504210146.62186A018B@akpm.mtv.corp.google.com Cc: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Stefan Behrens 提交于
Fix that when scrub tries to repair an I/O or checksum error and one of the devices containing the mirror is missing, it crashes in bio_add_page because the bdev is a NULL pointer for missing devices. Reported-by: NMarco L. Crociani <marco.crociani@gmail.com> Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Alexander Block 提交于
Fix the size members of btrfs_ioctl_ino_path_args and btrfs_ioctl_logical_ino_args. The user space btrfs-progs utilities used __u64 and the kernel headers used __u32 before. Signed-off-by: NAlexander Block <ablock84@googlemail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-