- 22 3月, 2006 36 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
This patch makes chroma standard selection based at possible values, according with datasheet. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Now, em28xx uses saa7115 instead of saa711x. saa7115 driver is capable of handling saa 7113, 7114 and 7115. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Markus Rechberger 提交于
Detaching the device didn't clean up several device files in /dev/dvb, after applying that patch all dvb devices disappeared as expected. Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The device, Medion 7134, has two saa7134 chips on it, but only one of them is functional in the current saa7134 driver. This patch adds autodetection for the second, unsupported saa7134 chip, as SAA7134_BOARD_MD7134_BRIDGE_2, and displays a message to the user (in dmesg) indicating that the second chip isn't yet functional. This is useful for users, since two instances of the saa7134 driver will spawn. This patch will prevent confusion by warning the user that only one of the chips on the board are functional. There are other versions of the SAA7134_BOARD_MD7134 with only a single saa7134 bridge/decoder -- those devices will not be affected by this patch. Only devices containing the second chip will display the warning. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
There are already some supported devices that contain two saa713x chips on-board, where only one of these chips is currently functional in the driver. We are already printing a warning message for the second saa7134 decoder in SAA7134_BOARD_AVERMEDIA_A169_B. This patch alters that case to make it generic, so that other cards in the same situation can use it. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andreas Oberritter 提交于
Use dvb_ringbuffer instead of an own buffer implementation in dmxdev.[ch]. Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andreas Oberritter 提交于
Oliver Endriss spotted, that resetting read and write pointers on flush() requires additional locking and breaks the av7110 driver. Therefore this patch partially reverts the previous patch titled "make dvb_ringbuffer compatible to dmxdev_buffer". Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Coverity reported a bug at checking max number of supported boards by em28xx init code. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
VIDEO_MXB selects VIDEO_TUNER, so we don't have to include tuner.o in the Makefile. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The cx25840 module requires external firmware in order to function, so it must select FW_LOADER, but saa7115 and saa7129 do not require it. This patch creates VIDEO_CX25840, and alters VIDEO_DECODER to select it. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Duncan Sands 提交于
If the call to cx88_core_get returns a NULL value, it is dereferenced by cx88_reset, and perhaps by cx88_core_put. Spotted by the Coverity checker. Signed-off-by: NDuncan Sands <baldrick@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Eric Sesterhenn 提交于
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andreas Oberritter 提交于
Added variable 'error' to struct dvb_ringbuffer, which is set to zero on init() and flush(). Also reset read an write pointers to zero on flush() to get less fragmented data. Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Marcin Rudowski 提交于
This patch fixes default values for some picture controls: - brightness set to 50% by default (now is 0%) - hue set to 50% by default (now is 0%) - sets saturation to datasheet value - volume set to 0dB (now is -32dB) and some left small fixes: - twice offset adding - balance didn't follow datasheet (bits[0:5] = attenuation; bit[6] = channel to provide attenuation) Signed-off-by: NMarcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by: NIan Pickworth <ian@pickworth.me.uk> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Matheus Izvekov 提交于
This patch adds support for the IR remote control found in the card CX88_BOARD_PROLINK_PLAYTVPVR. Signed-off-by: NMatheus Izvekov <mizvekov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Matheus Izvekov 提交于
This patch changes the gpio0 values for the card CX88_BOARD_PROLINK_PLAYTVPVR to the ones observed using RegSpy from the dscaler project. Signed-off-by: NMatheus Izvekov <mizvekov@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Rickard Osser 提交于
- Added support for AVerMedia A169 Dual Analog tuner card (dual saa7134 decoders - only 1 working right now) - Added autodetection for both parts of the card. It shows up like 2 cards, B1 and B - Enabled tuner B1, SVIDEO on B1 and composite1 through SVIDEO, FIXME: B is more or less dead at this point and I suspect the FM-radio is on the B part of the board Signed-off-by: NRickard Osser <ricky@osser.se> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- added tuner_lg_taln_pal_secam_ranges - renamed tuner 66 from TUNER_LG_NTSC_TALN_MINI to TUNER_LG_TALN - updated FlyTV mini Asus Digimatrix with new tuner Thanks-to: Rickard Osser <ricky@osser.se> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- matched indents on quotes within a printk Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
- added missing "count" element in Thomson FE6600 Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable. The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care. Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andreas Oberritter 提交于
Used Lindent, manually changed some line breaks. Removed invalid email addresses, useless casts and useless initialization of return values. Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andreas Oberritter 提交于
Rename 'enum dmxdevype' to 'enum dmxdev_type' and use this enum instead of int for the member 'type' of struct dmxdev_filter. Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andreas Oberritter 提交于
The member dvbdev gets initialized once but is never used after that. Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andreas Oberritter 提交于
The PID value is already stored in struct dmx_sct_filter_params which is a member of struct dmxdev_filter. Acked-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Marcin Rudowski 提交于
Old values generally works in A2 mono, but new ones allows: - detect and use Nicam stereo - mute in tv - use radio FM Signed-off-by: NMarcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Also Removed whitespaces introduced by previous tena patch Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ian Pickworth 提交于
There is an error in the cx88 code that causes this message in the syslog when balance is changed at full volume: Mar 4 18:35:08 ian2 kernel: cx88[0]: irq pci [0x1] vid* Mar 4 18:35:39 ian2 last message repeated 348 times Mar 4 18:36:01 ian2 last message repeated 564 times ... and so on The attached patch cures this problem. Signed-off-by: NIan Pickworth <ian@pickworth.me.uk> Signed-off-by: NMarcin Rudowski <mar_rud@poczta.onet.pl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Duncan Sands 提交于
The Coverity checker (previously Stanford checker) noticed that the value of nskips could be read even if it was never written. Signed-off-by: NDuncan Sands <baldrick@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Radio now works. Tuner now supports both PAL/D and STD/MN models Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Linus Torvalds 提交于
Conflicts: Documentation/video4linux/CARDLIST.cx88 drivers/media/video/cx88/Kconfig drivers/media/video/em28xx/em28xx-video.c drivers/media/video/saa7134/saa7134-dvb.c Resolved as in the original merge by Mauro Carvalho Chehab
-
- 20 3月, 2006 4 次提交
-
-
由 Linus Torvalds 提交于
-
由 Andrea Arcangeli 提交于
This address is going to be obsolete, so I should update it.
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] SB1: Check for -mno-sched-prolog if building corelis debug kernel. [MIPS] Sibyte: Fix race in sb1250_gettimeoffset(). [MIPS] Sibyte: Fix interrupt timer off by one bug. [MIPS] Sibyte: Fix M_SCD_TIMER_INIT and M_SCD_TIMER_CNT wrong field width. [MIPS] Protect more of timer_interrupt() by xtime_lock. [MIPS] Work around bad code generation for <asm/io.h>. [MIPS] Simple patch to power off DBAU1200 [MIPS] Fix DBAu1550 software power off. [MIPS] local_r4k_flush_cache_page fix [MIPS] SB1: Fix interrupt disable hazard. [MIPS] Get rid of the IP22-specific code in arclib. Update MAINTAINERS entry for MIPS.
-
由 Michael Chan 提交于
The 40-bit DMA workaround recently implemented for 5714, 5715, and 5780 needs to be expanded because there may be other tg3 devices behind the EPB Express to PCIX bridge in the 5780 class device. For example, some 4-port card or mother board designs have 5704 behind the 5714. All devices behind the EPB require the 40-bit DMA workaround. Thanks to Chris Elmquist again for reporting the problem and testing the patch. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-