- 10 9月, 2012 15 次提交
-
-
由 Gavin Shan 提交于
The patch reworks the current implementation so that the eeh errors will be handled basing on PE instead of eeh device. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch implements reset based on PE instead of eeh device. Also, The functions used to retrieve the reset type, either hot or fundamental reset, have been reworked for a little bit. More specificly, it's implemented based the the eeh device traverse function. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch refactors the original implementation in order to enable I/O and retrieve EEH log based on PE. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch introduces the function to traverse the devices of the specified PE and its child PEs. Also, the restore on device bars is implemented based on the traverse function. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
Originally, all the EEH operations were implemented based on OF node. Actually, it explicitly breaks the rules that the operation target is PE instead of device. Therefore, the patch makes all the operations based on PE instead of device. Unfortunately, the backend for config space has to be kept as original because it doesn't depend on PE. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
There're 2 conditions to trigger EEH error detection: invalid value returned from reading I/O or config space. On each case, the function eeh_dn_check_failure will be called to initialize EEH event and put it into the poll for further processing. The patch changes the function for a little bit so that the EEH error will be traced based on PE instead of EEH device any more. Also, the function eeh_find_device_pe() has been removed since the eeh device is tracing the PE by struct eeh_dev::pe. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
Since we've introduced dedicated struct to trace individual PEs, it's reasonable to trace its state through the dedicated struct instead of using "eeh_dev" any more. The patches implements the state tracing based on PE. It's notable that the PE state will be applied to the specified PE as well as its child PEs. That complies with the rule that problematic parent PE will prevent those child PEs from working properly. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The original implementation builds EEH event based on EEH device. We already had dedicated struct to depict PE. It's reasonable to build EEH event based on PE. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
During PCI hotplug and EEH recovery, the PE hierarchy tree might be changed due to the PCI topology changes. At later point when the PCI device is added, the PE will be created dynamically again. The patch introduces new function to remove EEH devices from the associated PE. That also can cause that the parent PE is removed from the PE tree if the parent PE doesn't include valid EEH devices and child PEs. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch creates PEs and associated the newly created PEs with it parent/silbing as well as EEH devices. It would become more straight to trace EEH errors and recover them accordingly. Once the EEH functionality on one PCI IOA has been enabled, we tries to create PE against it. If there's existing PE, to which the current PCI IOA should be attached, the existing PE will be converted from "device" type to "bus" type accordingly. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch implements searching PE based on the following requirements: * Search PE according to PE address, which is traditional PE address that is composed of PCI bus/device/function number, or unified PE address assigned by firmware or platform. * Search parent PE according to the given EEH device. It's useful when creating new PE and put it into right position. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
For one particular PE, it's only meaningful in the ancestor PHB domain. Therefore, each PHB should have its own PE hierarchy tree to trace those PEs created against the PHB. The patch creates PEs for the PHBs and put those PEs into the global link list traced by "eeh_phb_pe". The link list of PEs would be first level of overall PE hierarchy tree across the system. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The patch introduces global mutex for EEH so that the core data structures can be protected by that. Also, 2 inline functions are exported for that: eeh_lock() and eeh_unlock(). Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
As defined in PAPR 2.4, Partitionable Endpoint (PE) is an I/O subtree that can be treated as a unit for the purposes of partitioning and error recovery. Therefore, eeh core should be aware of PE. With eeh_pe struct, we can support PE explicitly. Further more, it makes all the stuff much more data centralized. Another important reason is for eeh core to support multiple platforms. Some of them like pSeries figures out PEs through OF nodes while others like powernv have to do that through PCI bus/device tree. With explicit PE support, eeh core will be implemented based on the centrialized data and platform dependent implementations figure it out by their feasible ways. When the struct is designed, following factors are taken in account: * Reflecting the relationships of PEs. PE might have parent as well children. * Reflecting the association of PE and (eeh) devices. * PEs have PHB boundary. * PE should have unique address assigned in the corresponding PHB domain. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
Currently, we have 3 phases for EEH initialization on pSeries platform. All of them are done through builtin functions: platform initialization, EEH device creation, and EEH subsystem enablement. All of them are done no later than ppc_md.setup_arch. That means that the slab/slub isn't ready yet, so we have to allocate memory chunks on basis of PAGE_SIZE for those dynamically created EEH devices. That's pretty expensive. In order to utilize slab/slub for memory allocation, we have to move the EEH initialization functions around, but all of them should be called after slab is ready. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 07 9月, 2012 5 次提交
-
-
由 Michael Neuling 提交于
No functional change Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Suzuki Poulose 提交于
There are some device-tree nodes, whose values are of type phys_addr_t. The phys_addr_t is variable sized based on the CONFIG_PHSY_T_64BIT. Change these to a fixed unsigned long long for consistency. This patch does the change only for memory_limit. The following is a list of such variables which need the change: 1) kernel_end, crashk_size - in arch/powerpc/kernel/machine_kexec.c 2) (struct resource *)crashk_res.start - We could export a local static variable from machine_kexec.c. Changing the above values might break the kexec-tools. So, I will fix kexec-tools first to handle the different sized values and then change the above. Suggested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NSuzuki K. Poulose <suzuki@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
This definition will be used by subsequent perf and oprofile patches Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
commit: 8b7b80b9 [24/29] powerpc: Uprobes port to powerpc Caused a clash with the fore200e driver: In file included from drivers/atm/fore200e.c:70:0: drivers/atm/fore200e.h:263:3: error: redefinition of typedef 'opcode_t' with different type arch/powerpc/include/asm/probes.h:25:13: note: previous declaration of 'opcode_t' was here Fix the namespace clash by making opcode_t in probes.h to ppc_opcode_t. Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mihai Caraman 提交于
Critical exception on 64-bit booke uses user-visible SPRG3 as scratch. Restore VDSO information in SPRG3 on exception prolog. Use a common sprg3 field in PACA for all powerpc64 architectures. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 05 9月, 2012 12 次提交
-
-
由 Paul Mackerras 提交于
The CPU hotplug code for the powernv platform currently only puts offline CPUs into nap mode if the powersave_nap variable is set. However, HV-style KVM on this platform requires secondary CPU threads to be offline and in nap mode. Since we know nap mode works just fine on all POWER7 machines, and the only machines that support the powernv platform are POWER7 machines, this changes the code to always put offline CPUs into nap mode, regardless of powersave_nap. Powersave_nap still controls whether or not CPUs go into nap mode when idle, as before. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mihai Caraman 提交于
Embedded.Hypervisor category defines GSPRG0..3 physical registers for guests. Avoid SPRG4-7 usage as scratch in host exception handlers, otherwise guest SPRG4-7 registers will be clobbered. For bolted TLB miss exception handlers, which is the version currently supported by KVM, use SPRN_SPRG_GEN_SCRATCH aka SPRG0 instead of SPRN_SPRG_TLB_SCRATCH aka SPRG6. Keep using TLB PACA slots to fit in one 64-byte cache line. For critical exception handlers use SPRG3 instead of SPRG7. Provide a routine to store and restore user-visible SPRGs. This will be subsequently used to restore VDSO information in SPRG3. Add EX_R13 to paca slots to free up SPRG3 and change the critical exception epilog to use it. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mihai Caraman 提交于
Guest Doorbell interrupts use guest save and restore registers. Add a new Guest Doorbell exception type to accommodate GSRR0/1 SPRs usage in exception prolog and fix the exception handler. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
This is the port of uprobes to powerpc. Usage is similar to x86. [root@xxxx ~]# ./bin/perf probe -x /lib64/libc.so.6 malloc Added new event: probe_libc:malloc (on 0xb4860) You can now use it in all perf tools, such as: perf record -e probe_libc:malloc -aR sleep 1 [root@xxxx ~]# ./bin/perf record -e probe_libc:malloc -aR sleep 20 [ perf record: Woken up 22 times to write data ] [ perf record: Captured and wrote 5.843 MB perf.data (~255302 samples) ] [root@xxxx ~]# ./bin/perf report --stdio ... 69.05% tar libc-2.12.so [.] malloc 28.57% rm libc-2.12.so [.] malloc 1.32% avahi-daemon libc-2.12.so [.] malloc 0.58% bash libc-2.12.so [.] malloc 0.28% sshd libc-2.12.so [.] malloc 0.08% irqbalance libc-2.12.so [.] malloc 0.05% bzip2 libc-2.12.so [.] malloc 0.04% sleep libc-2.12.so [.] malloc 0.03% multipathd libc-2.12.so [.] malloc 0.01% sendmail libc-2.12.so [.] malloc 0.01% automount libc-2.12.so [.] malloc The trap_nr addition patch is a prereq. Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
Add thread_struct.trap_nr and use it to store the last exception the thread experienced. In this patch, we populate the field at various places where we force_sig_info() to the process. This is also used in uprobes to determine if the probed instruction caused an exception. Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
Move is_trap() and relatives to a common file to be shared between kprobes and uprobes. Code movement only; no change in functionality. Suggested by Michael Ellerman. Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
We have an old FIXME in reg.h which points out that we should standardise on PVR_foo for our PVR #defines. Currently we use PVR_ on 32-bit and PV_ on 64-bit. So do that rename and remove the FIXME. Seeing as we're touching all but one usage of __is_processor(), rename it to something less ugly and more indicative of what it does, which is simply to check the PVR version. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
It contains no code and is not included by anyone. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
In commit f5339277 "powerpc: Remove FW_FEATURE ISERIES from arch code", we removed the bulk of the iSeries code, but missed a few bits. Remove the mschunks bits, these were only ever used on iSeries as far as I know, and are definitely not used anymore. Make it even clearer that phys_to_abs() is a nop, by making it a macro. We still have a few users of this, but should clean those up. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 24 8月, 2012 2 次提交
-
-
由 Michael Neuling 提交于
Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Scott Wood 提交于
Add several #includes that mpic_msgr relies on being pulled implicitly, which only happens on certain configs. Signed-off-by: NScott Wood <scottwood@freescale.com> Cc: Meador Inge <meador_inge@mentor.com> Cc: Jia Hongtao <B38951@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 16 8月, 2012 1 次提交
-
-
由 Alexander Graf 提交于
When we map a page that wasn't icache cleared before, do so when first mapping it in KVM using the same information bits as the Linux mapping logic. That way we are 100% sure that any page we map does not have stale entries in the icache. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 31 7月, 2012 1 次提交
-
-
由 Will Deacon 提交于
Rather than #define the options manually in the architecture code, add Kconfig options for them and select them there instead. This also allows us to select the compat IPC version parsing automatically for platforms using the old compat IPC interface. Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 7月, 2012 1 次提交
-
-
由 Marek Szyprowski 提交于
Commit 9adc5374 ('common: dma-mapping: introduce mmap method') added a generic method for implementing mmap user call to dma_map_ops structure. This patch converts ARM and PowerPC architectures (the only providers of dma_mmap_coherent/dma_mmap_writecombine calls) to use this generic dma_map_ops based call and adds a generic cross architecture definition for dma_mmap_attrs, dma_mmap_coherent, dma_mmap_writecombine functions. The generic mmap virt_to_page-based fallback implementation is provided for architectures which don't provide their own implementation for mmap method. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com>
-
- 24 7月, 2012 1 次提交
-
-
由 Cong Wang 提交于
Signed-off-by: NCong Wang <amwang@redhat.com>
-
- 11 7月, 2012 2 次提交
-
-
由 Bharat Bhushan 提交于
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Haren Myneni 提交于
Some power systems do not have legacy ISA devices. So, /dev/port is not a valid interface on these systems. User level tools such as kbdrate is trying to access the device using this interface which is causing the system crash. This patch will fix this issue by not creating this interface on these powerpc systems. Signed-off-by: NHaren Myneni <haren@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-