- 18 2月, 2014 1 次提交
-
-
由 Phoebe Buckheister 提交于
Replace the current u8 transmit_power in wpan_phy with s8 transmit_power. The u8 field contained the actual tx power and a tolerance field, which no physical radio every used. Adjust sysfs entries to keep compatibility with userspace, give tolerances of +-1dB statically there. This patch only adds support for this in the at86rf230 driver and the RF212 chip. Configuration calculation for RF212 is also somewhat basic, but does the job - the RF212 datasheet gives a large table with suggested values for combinations of TX power and page/channel, if this does not work well, we might have to copy the whole table. Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 12月, 2013 1 次提交
-
-
由 Weilong Chen 提交于
Fix checkpatch error with space. Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 7月, 2013 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the ieee802154 class code to use the correct field. Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 2月, 2013 1 次提交
-
-
由 Michał Mirosław 提交于
All in-kernel users of class_find_device() don't really need mutable data for match callback. In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c) this patch changes match callbacks to use const search data. The const is propagated to rtc_class_open() and power_supply_get_by_name() parameters. Note that there's a dev reference leak in suspend_test.c that's not touched in this patch. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 5月, 2010 1 次提交
-
-
由 Denis Kirjanov 提交于
Check for NULL pointer after kzalloc Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 13 11月, 2009 1 次提交
-
-
由 Dmitry Eremin-Solenikov 提交于
Move ieee802154 initialisation to subsys_initcall call, so that wpan-phy class is initialised before all devices (thus saving us from oops during bootup). Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-
- 06 11月, 2009 6 次提交
-
-
由 Dmitry Eremin-Solenikov 提交于
There is no real need to have ieee802154 interfaces separate into several small modules, as neither of them has it's own use. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-
由 Dmitry Eremin-Solenikov 提交于
Follow the usual pattern of devices registration by adding new function (wpan_phy_set_dev) that sets child->parent relationship and removing parent argument from wpan_phy_register call. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-
由 Dmitry Eremin-Solenikov 提交于
IEEE 802.15.4-2006 defines channel pages that hold channels (max 32 pages, 27 channels per page). Allow the driver to specify supported channels on pages, other than the first one. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-
由 Dmitry Eremin-Solenikov 提交于
Use snprintf to limit the amount of chars put in the buffer for attr -> show. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-
由 Dmitry Eremin-Solenikov 提交于
Set page to zero (for compatibility w/ devices supporting only first page). Also init channel by default to -1 to disallow transfers for non-initialised devices. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-
由 Dmitry Eremin-Solenikov 提交于
Add API to iterate over the wpan-phy instances. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-
- 20 8月, 2009 1 次提交
-
-
由 Dmitry Eremin-Solenikov 提交于
Add a sysfs/in-kernel representation of LR-WPAN master devices. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-