Use regmap for IO for the lm4857 driver instead of open-coding the IO read/write
functions.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

Let the ASoC core take care of registering the DAPM widget and routes as well as
the controls. This makes the code a bit shorter.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Acked-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Acked-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

wm8978 needs .symmetric_rates = 1.
The playback/capture will be strange without this patch
when it used asymmetric rate in same time
Tested-by: NYusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The DMA resource no longer available via this API when booting with DT.
When the board is booted with DT do not use platform_get_resource_byname(),
instead set the dma_data.filter_data to the name of the DMA channel and omap-pcm
can use this name to request the DMA channel.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

The DMA resource no longer available via this API when booting with DT.
DMIC is only available on OMAP4/5 and both can boot with DT only.
Set the dma_data.filter_data to the DMA name which will be used by omap-pcm
to request the DMA channel.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

The DMA resource no longer available via this API when booting with DT.
McPDM is only available on OMAP4/5 and both can boot with DT only.
Set the dma_data.filter_data to the DMA name which will be used by omap-pcm
to request the DMA channel.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

When booting with DT the platform_get_resource_byname() is not available to
get the DMA resource. In this case the DAI drivers will set the filter_data to
the name of the DMA and omap-pcm can use this to request the DMA channel.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

As per the User Manual, the RFS and BFS should be set in slave mode
for correct operation.
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NAndrew Bresticker <abrestic@chromium.org>
Reviewed-by: NSimon Glass <sjg@google.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This was committed in error.
Signed-off-by: NMark Brown <broonie@linaro.org>

SGTL5000_PLL_FRAC_DIV_MASK is used to mask bits 0-10 (11 bits in total) of
register CHIP_PLL_CTRL, so fix the mask to accomodate all this bit range.
Reported-by: NOskar Schirmer <oskar@scara.com>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

According to the sgtl5000 reference manual, the default value of CHIP_SSS_CTRL
is 0x10.
Reported-by: NOskar Schirmer <oskar@scara.com>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

There is an error in merge commit 384b8345 on conflict resolution which
causes the following NULL pdata pointer bug.

wm8962 0-001a: customer id 0 revision D
Unable to handle kernel NULL pointer dereference at virtual address 00000004
pgd = 80004000
[00000004] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0+ #1
task: bf870000 ti: bf874000 task.ti: bf874000
PC is at wm8962_probe+0x134/0x6c8
LR is at regmap_unlock_mutex+0x10/0x14
pc : [<80452100>]    lr : [<80304cf4>]    psr: a0000113
sp : bf875c98  ip : 00000000  fp : bf875cd4
r10: 00000000  r9 : bfb1830c  r8 : 80779bc4
r7 : 00000000  r6 : 00000001  r5 : bfbac010  r4 : bfb33e00
r3 : 80304ce4  r2 : 00000000  r1 : 00000001  r0 : fffffffb
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c53c7d  Table: 1000404a  DAC: 00000017
Process swapper/0 (pid: 1, stack limit = 0xbf874238)
Stack: (0xbf875c98 to 0xbf876000)
...

Fix the error by assigning pdata a correct pointer.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

If the ssi or codec drivers are not loaded (for instance, because spi or i2c
bus drivers are not loaded), returning -EINVAL will for people to unload and
then reload the module to get sound working. Returning E_PROBE_DEFER will
mitigate this.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

There is a typo in the filename (i2c mentioned instead of i2s).
However, this is a redundant piece of information. Delete it
altogether.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

We still need video & sound drivers with device tree enabled.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NTony Lindgren <tony@atomide.com>

spacr64 gcc-3.4.5 (at least) spits this back.

Cc: Andrey Smirnov <andrey.smirnov@convergeddevices.net>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since the Samsung platforms have moved to pinctrl for pin muxing and that
is handled in the core the old GPIO based muxing code can just be removed.
Something similar had been submitted by Thomas Abraham back in March but
a resubmission following review never happened.
Signed-off-by: NMark Brown <broonie@linaro.org>

Mostly the mxs system design uses saif0 mclk output as the clock source
of codec.  Since the mclk is implemented as a general divider with the
saif clk as the parent clock, let's register the mclk as a basic
clk-divider to common clock framework.  Then with it being a clock
provdier, clk_get() call in codec driver probe function will just work.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

codec->control_data has to be left unset to make the ASoC core access
the regmap properly.

That bug slipped in during a rebase session of the driver refactoring.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

Replace calls to snd_soc_update_bits() with regmap_update_bits().
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

commit b047e1cc (ASoC: ac97: Support multi-platform AC'97) introduced
some build failures for modules wanting to access the generic
soc_ac97_ops.  For example:

ERROR: "soc_ac97_ops" [sound/soc/codecs/snd-soc-wm9712.ko] undefined!

To fix, export soc_ac97_ops to modules.

Cc: Mark Brown <broonie@linaro.org>
Signed-off-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

commit b047e1cc (ASoC: ac97: Support multi-platform AC'97) introduced
some build failures for the pxa2xx-ac97 support, fix them.

Cc: Mark Brown <broonie@linaro.org>
Signed-off-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

With the conversion to devm_ioremap_resource() the memregion variable is
no longer used so it can be dropped.
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

devm_ioremap_resource() already outputs an error message when any of the
operations it performs fails, so the duplicate in the caller can be
removed.
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

io_remap_pfn_range() will set it just fine
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

It turns out that the TAS5086 doesn't like channel start parts to be
empty, and if all channels are configured to Mid-Z, part 1 has to be
used.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The TAS5086_CLOCK_CONTROL also has a size of 1 byte.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Currently we can only have a single platform built in with AC'97 support
due to the use of a global variable to provide the bus operations. Fix
this by making that variable a pointer and having the bus drivers set the
operations prior to registering.

This is not a particularly good or nice approach but it avoids blocking
multiplatform and a real fix involves fixing the fairly deep problems
with AC'97 support - we should be converting it to a real bus.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

There's no content in the announcement.
Signed-off-by: NMark Brown <broonie@linaro.org>

Signed-off-by: NMark Brown <broonie@linaro.org>

Otherwise we may instantiate and hence have something try to access the
device while it is still completing initialisation.
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Signed-off-by: NMark Brown <broonie@linaro.org>

The driver core does this and it's never legal to rely on the value of
drvdata if not set in probe() anyway.
Signed-off-by: NMark Brown <broonie@linaro.org>

Also clean up the error reporting from failed requests while we're at it.
Signed-off-by: NMark Brown <broonie@linaro.org>

Acked-by: NManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>