There is only one waiter for the completion, therefore there
is no need to use complete_all(). Let's make that clear by
using complete() instead of complete_all().

While we are at it, we do a small optimization with the
reinitialization of the completion before we use it.

The usage pattern of the completion is:

waiter context                          waker context

send_packet()
  reinit_completion()
  usb_sumbit_urb()
  wait_for_completion_interruptible()

                                        usb_tx_callback()
                                          complete()

                                        imon_disconnect()
                                          complete()
Signed-off-by: NDaniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There is only one waiter for the completion, therefore there is no need
to use complete_all(). Let's make that clear by using complete() instead
of complete_all().

While we are at it, we do a small optimization with the reinitialization
of the completion before we use it.

The usage pattern of the completion is:

waiter context                          waker context

send_packet()
  init_completion()
  usb_submit_urb()
  wait_for_completion_interruptible()

                                        usb_tx_callback()
                                          complete()

                                        imon_disonnect()
                                          complete()
Signed-off-by: NDaniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use a type with explicit endianness in machine to big endian conversion.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Documentation states that the "default-input" property should reside
directly in the node of the device.  This adjusts the parsing to make the
implementation consistent with the documentation.

Based on patch by William Towle <william.towle@codethink.co.uk>.
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The text states that default-input is an endpoint property, but in the
example it is a device property.

The default input is a property of the chip, not of a particular port, so
the example makes more sense.
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The advertised V4L2 pixel format and Media Bus code don't match.
The current media bud code advertised is MEDIA_BUS_FMT_YUYV8_2X8
which does not reflect what the encoder actually outputs.
This encoder generate MEDIA_BUS_FMT_UYVY8_2X8 so advertise as such.
Signed-off-by: NBenoit Parrot <bparrot@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Function ite_set_carrier_params() uses variable use_demodulator after
having initialized it to false in some if branches, but this variable is
never set to true otherwise.

This bug has been found using clang -Wsometimes-uninitialized warning
flag.

Fixes: 620a32bb ("[media] rc: New rc-based ite-cir driver for
several ITE CIRs")
Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

In mb86a20s_read_status_and_stats(), when mb86a20s_read_status() fails,
the function returns the value in variable rc without initializing it
first. Fix this by propagating the error code from variable status_nr.

This bug has been found using clang and -Wsometimes-uninitialized
warning flag.
Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

TechnoTrend TT-connect S2-4650 CI seems to be a variation of
the DVBSky S960CI device.
Signed-off-by: NOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The variable name is always assigned to a literal string in the
proceeding switch statement, so it is never null and hence the
null check is redundant. Remove null the check.
Signed-off-by: NColin Ian King <colin.king@canonical.com>

We get 1 warning when building kernel with W=1:
drivers/media/platform/coda/coda-h264.c:22:5: warning: no previous prototype for 'coda_h264_padding' [-Wmissing-prototypes]

In fact, this function is declared in coda.h, so this patch
add missing header dependencies.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>

cx24120_set_frontend currently allows invalid delivery system types
other than SYS_DVBS2 and SYS_DVBS.  Fix this by returning -EINVAL
for invalid values.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NJemma Denson <jdenson@gmail.com>

Add a new USB ID for EVOLVEO XtraTV stick.

[mchehab@s-opensource.org: fix patch and make checkpatch happy]
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Some devices have invalid baSourceID references, causing uvc_scan_chain()
to fail, but if we just take the entities we can find and put them
together in the most sensible chain we can think of, turns out they do
work anyway. Note: This heuristic assumes there is a single chain.

At the time of writing, devices known to have such a broken chain are
  - Acer Integrated Camera (5986:055a)
  - Realtek rtl157a7 (0bda:57a7)
Signed-off-by: NHenrik Ingo <henrik.ingo@avoinelama.fi>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of using codeblock for the cardlists, use tables, in
order to improve their visual when presenting them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

For those cameras that were missing descriptions, update using
some web research:
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_STV0680.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_ZC3XX.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_KINECT.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SPCA561.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_VICAM.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_DTCS033.html
	https://bugs.launchpad.net/ubuntu/+source/linux/+bug/564979
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_PAC7302.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SONIXB.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SONIXJ.htmlSigned-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are several missing USB IDs that are defined on gspca
drivers. Add them.

The missing entries were found/created using the following script:

<script>
use strict;
use File::Find;

my $src = "drivers/media/usb/gspca/";
my $table = 0;
my %data;

my $id;

my $len = 0;

open IN, "Documentation/media/v4l-drivers/gspca-cardlist.rst";
while (<IN>) {
	if (m/^=+\s+=+\s+=+$/) {
		$table++;
		next;
	}
	next if ($table != 2);
	if (m/^(\S+)\s+(\S+)\s+(.*)/) {
		$id = "$1_$2";
		$data{$id}->{driver} = $1;
		$data{$id}->{usb_id} = $2;
		$data{$id}->{name} = $3;
		$data{$id}->{valid} = 0;

		$len = length($3) if (length($3) > $len);
	}
}
close IN;

sub parse_dir {
        my $file = $File::Find::name;

	open IN, $file;

	my $driver = $file;

	$driver =~ s,($src),,;

	$driver =~ s,/.*,,;
	$driver =~ s,\.c$,,;

	while (<IN>) {
		next if (m,/\*.*USB_DEVICE,);
		if (m/USB_DEVICE[^\(]*\(\s*0x(\S+)\s*\,\s*0x(\S+)\)(.*)/) {
			my $n = "$1:$2";
			my $o = $3;
			$id = "${driver}_$n";

			$data{$id}->{valid} = 1;

			next if (defined $data{$id}->{driver});

			$data{$id}->{driver} = $driver;
			$data{$id}->{usb_id} = $n;

			if ($o =~ m,\/\*\s*(.*)\*\/,) {
				$n = $1;
				$n =~ s/\s+//;
				$data{$id}->{name} = $n;
			} else {
				$data{$id}->{name} = "";
			}
		}
	}
	close IN;
}

find({wanted => \&parse_dir, no_chdir => 1}, $src);

print "The gspca cards list\n";
print "====================\n\n";
print "The modules for the gspca webcam drivers are:\n\n";
print "- gspca_main: main driver\n";
print "- gspca\\_\\ *driver*: subdriver module with *driver* as follows\n\n";
print "=========	=========	" . "=" x $len . "\n";
print "*driver*	vend:prod	Device\n";
print "=========	=========	" . "=" x $len . "\n";

foreach my $id (sort { $data{$a}->{usb_id} . $data{$a}->{driver} cmp $data{$b}->{usb_id} . $data{$b}->{driver} } keys %data) {
	next if (!$data{$id}->{valid});

	my $s = sprintf "%-15s %s\t%s\n",
		$data{$id}->{driver}, $data{$id}->{usb_id}, $data{$id}->{name};

	# Replace tabs by spaces
	$s =~ s/[ \t]+$//;
        $s =~ s<^ {8}> <\t>;
        $s =~ s<^ {1,7}\t> <\t>;
        $s =~ s< {1,7}\t> <\t>;

	printf $s;
}
print "=========	=========	" . "=" x $len . "\n";
</script>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Some entries are out of order.

While here, clear spaces/tabs.

The content remains the same, with the exeption of one duplicated
entry from the same driver, where two different brand names share
the same entry. The content of such cell was merged, using a
comma.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

That makes easier to parse the names, in order to sync it
with gspca-cardlist.rst.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Keeping Documentation/media/v4l-drivers/gspca-cardlist.rst in
sync with the gspca script requires a parser. Simplify the
commented line, to make the parser work better.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Support both the HSV24 and HSV32 formats. From a hardware point of view
pretend the formats are RGB, the RPF and WPF will just pass the data
through without performing any processing.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Support HSV encoding. Most of the logic is replicated from ycbcr_enc.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Describe the hsv_enc field and its use.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Some hardware maps the Hue between 0 and 255 instead of 0-179. Support
this format with a new field hsv_enc.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Avoid duplicated clamps when possible.
Suggested-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

precalculate_color() had a optimization that avoided duplicated
conversion for YUV formats. This optimization did not take into
consideration YUV444, YUV555, YUV565 or limited range quantization.

This patch keeps the optimization, but fixes the wrong handling.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Simplifies handling of Gray formats.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

r_y and g_u now also contain the H and V components on the HSV formats.
Rename the variables to reflect this.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch adds support for V4L2_PIX_FMT_HSV24 and V4L2_PIX_FMT_HSV32.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Replace is_yuv with color_enc Which can be used by other
color encodings such us HSV.

This change should ease the review of the following patches.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

My initials were on the Changelog, but there was no link to my name.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Describe the HSV formats
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

These formats store the color information of the image
in a geometrical representation. The colors are mapped into a
cylinder, where the angle is the HUE, the height is the VALUE
and the distance to the center is the SATURATION. This is a very
useful format for image segmentation algorithms.
Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Delay suspending the device by 1000 ms by default. This is done on
explicit power off through s_power() callback, through releasing the
file descriptor, NVM read or when the probe finishes.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Switch to runtime PM in sensor power management. The internal power count
is thus removed.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use the suspend and resume ops for freeze, thaw, poweroff and restore
callbacks as well.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The dev field of the v4l2_subdev was left NULL for the pixel array and
binner sub-devices. Fix this.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Checking that the mutex is not acquired is unnecessary for user processes
are stopped by this point. Drop the check.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Don't complain about a failure to compute the pre_pll divisor. The
function is used to determine whether a particular combination of bits per
sample value and a link frequency can be used, in which case there are
lots of unnecessary driver messages. During normal operation the failure
generally does not happen. Use dev_dbg() instead.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The first time the sensor is powered on, the information is not yet
available.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NSebastian Reichel <sre@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>