- 18 1月, 2009 7 次提交
-
-
由 Brian Gerst 提交于
Also clean up PER_CPU_VAR usage in xen-asm_64.S tj: * remove now unused stack_thread_info() * s/kernelstack/kernel_stack/ * added FIXME comment in xen-asm_64.S Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
tj: moved cpu_number definition out of CONFIG_HAVE_SETUP_PER_CPU_AREA for voyager. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Move the exception stacks to per-cpu, removing specific allocation code. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Move the irqstackptr variable from the PDA to per-cpu. Make the stacks themselves per-cpu, removing some specific allocation code. Add a seperate flag (is_boot_cpu) to simplify the per-cpu boot adjustments. tj: * sprinkle some underbars around. * irq_stack_ptr is not used till traps_init(), no reason to initialize it early. On SMP, just leaving it NULL till proper initialization in setup_per_cpu_areas() works. Dropped is_boot_cpu and early irq_stack_ptr initialization. * do DECLARE/DEFINE_PER_CPU(char[IRQ_STACK_SIZE], irq_stack) instead of (char, irq_stack[IRQ_STACK_SIZE]). Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 17 1月, 2009 2 次提交
-
-
由 Tejun Heo 提交于
arm, arm/mach-integrator and powerpc were missing .data.percpu.page_aligned in their percpu output section definitions. Add it. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
The newly added PERCPU_*() macros define and use __per_cpu_load but VMLINUX_SYMBOL() was missing from usages causing build failures on archs where linker visible symbol is different from C symbols (e.g. blackfin). Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 16 1月, 2009 15 次提交
-
-
由 Tejun Heo 提交于
On x86_64, if get_per_cpu_var() is used before per cpu area is setup (if lockdep is turned on, it happens), it needs this_cpu_off to point to __per_cpu_load. Initialize accordingly. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
EXPORT_PER_CPU_SYMBOL() got misplaced during merge leading to build failure. Fix it. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Ingo Molnar 提交于
It is an optimization and a cleanup, and adds the following new generic percpu methods: percpu_read() percpu_write() percpu_add() percpu_sub() percpu_and() percpu_or() percpu_xor() and implements support for them on x86. (other architectures will fall back to a default implementation) The advantage is that for example to read a local percpu variable, instead of this sequence: return __get_cpu_var(var); ffffffff8102ca2b: 48 8b 14 fd 80 09 74 mov -0x7e8bf680(,%rdi,8),%rdx ffffffff8102ca32: 81 ffffffff8102ca33: 48 c7 c0 d8 59 00 00 mov $0x59d8,%rax ffffffff8102ca3a: 48 8b 04 10 mov (%rax,%rdx,1),%rax We can get a single instruction by using the optimized variants: return percpu_read(var); ffffffff8102ca3f: 65 48 8b 05 91 8f fd mov %gs:0x7efd8f91(%rip),%rax I also cleaned up the x86-specific APIs and made the x86 code use these new generic percpu primitives. tj: * fixed generic percpu_sub() definition as Roel Kluin pointed out * added percpu_and() for completeness's sake * made generic percpu ops atomic against preemption Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Do the following cleanups: * kill x86_64_init_pda() which now is equivalent to pda_init() * use per_cpu_offset() instead of cpu_pda() when initializing initial_gs Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
pda is now a percpu variable and there's no reason it can't use plain x86 percpu accessors. Add x86_test_and_clear_bit_percpu() and replace pda op implementations with wrappers around x86 percpu accessors. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] As pda is now allocated in percpu area, it can easily be made a proper percpu variable. Make it so by defining per cpu symbol from linker script and declaring it in C code for SMP and simply defining it for UP. This change cleans up code and brings SMP and UP closer a bit. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
Now that pda is allocated as part of percpu, percpu doesn't need to be accessed through pda. Unify x86_64 SMP percpu access with x86_32 SMP one. Other than the segment register, operand size and the base of percpu symbols, they behave identical now. This patch replaces now unnecessary pda->data_offset with a dummy field which is necessary to keep stack_canary at its place. This patch also moves per_cpu_offset initialization out of init_gdt() into setup_per_cpu_areas(). Note that this change also necessitates explicit per_cpu_offset initializations in voyager_smp.c. With this change, x86_OP_percpu()'s are as efficient on x86_64 as on x86_32 and also x86_64 can use assembly PER_CPU macros. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] Currently pdas and percpu areas are allocated separately. %gs points to local pda and percpu area can be reached using pda->data_offset. This patch folds pda into percpu area. Due to strange gcc requirement, pda needs to be at the beginning of the percpu area so that pda->stack_canary is at %gs:40. To achieve this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is added and used to reserve pda sized chunk at the start of the percpu area. After this change, for boot cpu, %gs first points to pda in the data.init area and later during setup_per_cpu_areas() gets updated to point to the actual pda. This means that setup_per_cpu_areas() need to reload %gs for CPU0 while clearing pda area for other cpus as cpu0 already has modified it when control reaches setup_per_cpu_areas(). This patch also removes now unnecessary get_local_pda() and its call sites. A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into per cpu area" patch. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
_cpu_pda array first uses statically allocated storage in data.init and then switches to allocated bootmem to conserve space. However, after folding pda area into percpu area, _cpu_pda array will be removed completely. Drop the reallocation part to simplify the code for soon-to-follow changes. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] CPU startup code in head_64.S loaded address of a zero page into %gs for temporary use till pda is loaded but address to the actual pda is available at the point. Load the real address directly instead. This will help unifying percpu and pda handling later on. This patch is mostly taken from Mike Travis' "x86_64: Fold pda into per cpu area" patch. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] This patch makes percpu symbols zerobased on x86_64 SMP by adding PERCPU_VADDR() to vmlinux.lds.h which helps setting explicit vaddr on the percpu output section and using it in vmlinux_64.lds.S. A new PHDR is added as existing ones cannot contain sections near address zero. PERCPU_VADDR() also adds a new symbol __per_cpu_load which always points to the vaddr of the loaded percpu data.init region. The following adjustments have been made to accomodate the address change. * code to locate percpu gdt_page in head_64.S is updated to add the load address to the gdt_page offset. * __per_cpu_load is used in places where access to the init data area is necessary. * pda->data_offset is initialized soon after C code is entered as zero value doesn't work anymore. This patch is mostly taken from Mike Travis' "x86_64: Base percpu variables at zero" patch. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
Make vmlinux_32.lds.S use the generic PERCPU() macro instead of open coding it. This will ease future changes. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] * Ruggedize some calls in setup_percpu.c to prevent mishaps in early calls, particularly for non-critical functions. * Cleanup DEBUG_PER_CPU_MAPS usages and some comments. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
Make early_per_cpu() a lvalue as per_cpu() is and use it where applicable. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
There's no instruction to move a 64bit immediate into memory location. Drop "i". Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 1月, 2009 6 次提交
-
-
由 Ingo Molnar 提交于
-
由 Ingo Molnar 提交于
Impact: cleanup Use the proper type. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
E.g. when called due to an early panic. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
Impact: widen the effect of the 'nolapic' boot parameter "nolapic" should not only suppress SMP and use of the LAPIC, but it also ought to have the effect of disabling all IO-APIC related activity as well as PCI MSI and HT-IRQs. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
Impact: fix build errors Since the SPARSE IRQS changes redefined how the kstat irqs are organized, arch's must use the new accessor function: kstat_incr_irqs_this_cpu(irq, DESC); If CONFIG_SPARSE_IRQS is set, then DESC is a pointer to the irq_desc which has a pointer to the kstat_irqs. If not, then the .irqs field of struct kernel_stat is used instead. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
Thierry Vignaud reported: > http://bugzilla.kernel.org/show_bug.cgi?id=12372 > > On P4 with an SiS motherboard (video card is a SiS 651) > X server fails to start with error: > xf86MapVidMem: Could not mmap framebuffer (0x00000000,0x2000) (Invalid > argument) Here X is trying to map first 8KB of memory using /dev/mem. Existing code treats first 0-4KB of memory as non-RAM and 4KB-8KB as RAM. Recent code changes don't allow to map memory with different attributes at the same time. Fix this by treating the first 1MB legacy region as special and always track the attribute requests with in this region using linear linked list (and don't bother if the range is RAM or non-RAM or mixed) Reported-and-tested-by: NThierry Vignaud <tvignaud@mandriva.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 1月, 2009 10 次提交
-
-
由 Yinghai Lu 提交于
Impact: clean up to be same as 64bit 32-bit is using per-cpu vector too, so don't use default NR_IRQS. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/travis/linux-2.6-cpus4096-for-ingo into cpus4096
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup, solve 80 columns wrap problems Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Impact: cleanup, solve 80 columns wrap problems Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
This commit broke flush_tlb_others_ipi() causing boot hangs on a 16 logical cpu system: > commit 4595f962 > Author: Rusty Russell <rusty@rustcorp.com.au> > Date: Sat Jan 10 21:58:09 2009 -0800 > > x86: change flush_tlb_others to take a const struct cpumask This change resulted in sending the invalidate tlb vector to the sender itself causing the hang. flush_tlb_others_ipi() should exclude the sender itself from the destination list. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 PAT: remove CPA WARN_ON for zero pte x86 PAT: return compatible mapping to remap_pfn_range callers x86 PAT: change track_pfn_vma_new to take pgprot_t pointer param x86 PAT: consolidate old memtype new memtype check into a function x86 PAT: remove PFNMAP type on track_pfn_vma_new() error
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: TWL4030: fix clk API usage [ARM] 5364/1: allow flush_ioremap_region() to be used from modules [ARM] w90x900: fix build errors and warnings [ARM] i.MX add missing include [ARM] i.MX: fix breakage from commit 27889273 [ARM] i.MX: remove LCDC controller register definitions from imx-regs.h
-
由 Bernd Schmidt 提交于
Since we (Analog Devices) updated our Blackfin kernel to 2.6.28, we've seen occasional 5-second hangs from telnet. telnetd calls select with a NULL timeout, but with the new kernel, the system call occasionally returns 0, which causes telnet to call sleep (5). This did not happen with earlier kernels. The code in sys_pselect7 looks a bit strange, in particular the variable "to" is initialized to NULL, then changed if a non-null timeout was passed in, but not used further. It needs to be passed to core_sys_select instead of &end_time. This bug was introduced by 8ff3e8e8 ("select: switch select() and poll() over to hrtimers"). Signed-off-by: NBernd Schmidt <bernd.schmidt@analog.com> Reviewed-by: NUlrich Drepper <drepper@redhat.com> Tested-by: NRobin Getz <rgetz@blackfin.uclinux.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Helge Deller 提交于
Commit b430428a ("8250: Don't clobber spinlocks.") introduced a regression on the parisc architecture, which broke the handover to the serial port at boottime. early_serial_setup() was changed to only copy a subset of the uart_port fields, and sadly the "type" and "line" fields were forgotten and thus the serial port was not initialized and could not be used for a handover. This patch fixes this by copying the missing fields. As this change to early_serial_setup() doesn't need an initialized spinlock in the uart_port struct any longer, we can drop the spinlock initialization in the superio driver. Cc: David Daney <ddaney@caviumnetworks.com> Cc: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Cc: linux-parisc@vger.kernel.org Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
Always pass a struct device if one is available; and there's really no reason for the processor specific stuff in this file if only people would follow the API usage properly by using the struct device. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-