Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GP102/GP104 require a harder reset of PMU prior to DEVINIT, or the IFR
image will hang.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Just enough to hookup preinit reset(), which DEVINIT will depend on later.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

gm20b's FB has the same capabilities as gm200, minus the ability to
allocate RAM. Create a device that reflects this instead of re-using the
gk20a device which may be incorrect.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-By: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We received a donation of a Titan which has this useless feature
allowing users to control the brightness of the LED behind the
logo of NVIDIA. In the true spirit of open source, let's expose
that to the users of very expensive cards!

This patch hooks up this LED/PWM to the LED subsystem which allows
blinking it in sync with cpu/disk/network/whatever activity (heartbeat
is quite nice!). Users may also implement some breathing effect or
morse code support in the userspace if they feel like it.

v2:
 - surround the use of the LED framework with ifdef CONFIG_LEDS_CLASS

v3:
 - avoid using ifdefs everywhere, follow the recommendations of
   /doc/Documentation/CodingStyle. Suggested by Emil Velikov.

v4 (Ben):
 - squashed series of fixes from ml
Signed-off-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

v5: Squashed speedo related commits.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Since gf100 we need a speedo value for calculating the voltage. The readout
will be added in a later patch.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Depending on the value a different formular is used to calculated the
voltage for this entry.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

0: base clock from the vbios is max clock (default)
1: boost only to boost clock from the vbios
2: boost to max clock available

v2: Moved into nvkm_cstate_valid.
v4: Check the existence of the clocks before limiting.
v5: Default to boost level 0.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This table contains three important clocks:

base  clock: This is the non boosted max clock.
tdp   clock: The clock at wich the vbios guarentees the TDP won't ever be
             exceeded at max load (seems to be always the same as the base
             clock, but behaves differently).
boost clock: The avg clock the gpu will stay boosted to. It doesn't seem to
             affect the behaviour of the nvidia driver at all though.

v2: Make clear that base/boost/tdp fields are ids.
v5: Rename Base clock to vpstate.
    Make vbios pointers 32bit.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We should never allow to select a cstate which current voltage (depending
on the temperature) is higher than

1. the max volt entries in the voltage map table.
2. what tha gpu actually can volt to.

v3: Use find_best for all cstates before actually trying.
    Add nvkm_cstate_get function to get cstate by index.
v5: Cstates with voltages lower then min_uv are valid.
    Move nvkm_cstate_get into the previous commit.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Now the cstatei parameter can be used of the nvkm_cstate_prog function to
select a specific cstate.

v5: Make a constant for the magic value.
    Use list_last_entry.
    Add nvkm_cstate_get here instead of in the next commit.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The voltage entries actually may map to a different voltage depending on
the current temperature.

v2: Only read the temperature when actually needed.
v5: Be smarter about using max().
    Don't read the temperature anymore.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This way other subdevs can notify the clk subdev about temperature changes
without the need of clk to poll that value.

Also make this function safe to be called from an interrupt handler.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

It is better to read out the id out of the cstate struct directly instead
of iterating over the list of cstates over and over again. Especially when
we start saving pointers to a nvkm_cstate struct, it makes things easier.

v5: Rename field to id.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Each pstate has its own voltage map entry like each cstate has.

The voltages of those entries act as a floor value for the currently
selected pstate and nvidia never sets a voltage below them.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

There are at least three "max" entries, which specify the max voltage.
Because they are actually normal voltage map entries, they can also be
affected by the temperature.

Nvidia respects those entries and if they get changed, nvidia uses the
lower voltage from all three.

We shouldn't exceed those voltages at any given time.

v2: State what those entries do in the source.
v3: Add the third max entry.
v5: Better describe the entries.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nvkm_volt_map_min is a copy of nvkm_volt_map, which always returns the
lowest possible voltage for a cstate.

nvkm_volt_map will get a temperature parameter there later and also fix
the voltage calculation, so that this functions will be completly
different later.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Tested-by: NPierre Moreau <pierre.morrow@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

There is a field in the voltage table which tells us if the VIDs are taken
from the entries or calculated through the header.

v2: Don't break older versions.
v5: Reverse flag name.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Tested-by: NPierre Moreau <pierre.morrow@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Previously we parsed that table a bit wrong:
1. The entry layout depends on the sensor type used.
2. We have all resitors in one entry for the INA3221.
3. The config is already included in the vbios.

This commit addresses that issue and with that we should be able to read
out the right power consumption for every GPU with a INA209, INA219 and
INA3221.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This reverts commit aff51175.

The commit caused fence timeouts within nvc0_screen_destroy and most likely
other places as well.

The most obvious effect is, that userspace processes take minutes to
actually quit.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This flag's only remaining function is to ignore the uncached flag for
BOs on coherent architectures.

However the reason for allocating an object uncache on a non-coherent
architecture (namely because the cost of doing explicit flushes/
invalidations is higher than the benefit of caching the data because
accesses are few and far between) should also apply on architectures for
which coherency is maintained implicitly. Thus allocate coherent objects
as uncached on all architectures.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>