Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.

Done via cocci script:

$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
-	!compare_ether_addr(a, b)
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	compare_ether_addr(a, b)
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) == 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) != 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) == 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) != 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!!ether_addr_equal(a, b)
+	ether_addr_equal(a, b)
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.

Done via cocci script:

$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
-	!compare_ether_addr(a, b)
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	compare_ether_addr(a, b)
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) == 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) != 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) == 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) != 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!!ether_addr_equal(a, b)
+	ether_addr_equal(a, b)
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.

Done via cocci script:

$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
-	!compare_ether_addr(a, b)
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	compare_ether_addr(a, b)
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) == 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) != 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) == 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) != 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!!ether_addr_equal(a, b)
+	ether_addr_equal(a, b)
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.

Done via cocci script:

$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
-	!compare_ether_addr(a, b)
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	compare_ether_addr(a, b)
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) == 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) != 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) == 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) != 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!!ether_addr_equal(a, b)
+	ether_addr_equal(a, b)
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a boolean function to check if 2 ethernet addresses
are the same.

This is to avoid any confusion about compare_ether_addr
returning an unsigned, and not being able to use the
compare_ether_addr function for sorting ala memcmp.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During merge of net to net-next the changes in patch:

e1000e: Fix default interrupt throttle rate not set in NIC HW

got munged in param.c of the e1000e driver.  This rectifies the
merge issues.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

can be used e.g. for ingress traffic policing or
to detect when a host/port consumes more bandwidth than expected.

This is done by optionally making cost to mean
"cost per 16-byte-chunk-of-data" instead of "cost per packet".
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

followup patch would bloat main match function too much.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

credit_cap can be set to credit, which avoids inlining user2credits
twice. Also, remove inline keyword and let compiler decide.

old:
    684     192       0     876     36c net/netfilter/xt_limit.o
   4927     344      32    5303    14b7 net/netfilter/xt_hashlimit.o
now:
    668     192       0     860     35c net/netfilter/xt_limit.o
   4793     344      32    5169    1431 net/netfilter/xt_hashlimit.o
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The target allows you to create rules in the "raw" and "mangle" tables
which set the skbuff mark by means of hash calculation within a given
range. The nfmark can influence the routing method (see "Use netfilter
MARK value as routing key") and can also be used by other subsystems to
change their behaviour.

[ Part of this patch has been refactorized and modified by Pablo Neira Ayuso ]
Signed-off-by: NHans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch adds the flags parameter to ipv6_find_hdr. This flags
allows us to:

* know if this is a fragment.
* stop at the AH header, so the information contained in that header
  can be used for some specific packet handling.

This patch also adds the offset parameter for inspection of one
inner IPv6 header that is contained in error messages.
Signed-off-by: NHans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch removes ip_queue support which was marked as obsolete
years ago. The nfnetlink_queue modules provides more advanced
user-space packet queueing mechanism.

This patch also removes capability code included in SELinux that
refers to ip_queue. Otherwise, we break compilation.

Several warning has been sent regarding this to the mailing list
in the past month without anyone rising the hand to stop this
with some strong argument.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Explicit helper attachment via the CT target is broken with NAT
if non-standard ports are used. This problem was hidden behind
the automatic helper assignment routine. Thus, it becomes more
noticeable now that we can disable the automatic helper assignment
with Eric Leblond's:

9e8ac5a netfilter: nf_ct_helper: allow to disable automatic helper assignment

Basically, nf_conntrack_alter_reply asks for looking up the helper
up if NAT is enabled. Unfortunately, we don't have the conntrack
template at that point anymore.

Since we don't want to rely on the automatic helper assignment,
we can skip the second look-up and stick to the helper that was
attached by iptables. With the CT target, the user is in full
control of helper attachment, thus, the policy is to trust what
the user explicitly configures via iptables (no automatic magic
anymore).

Interestingly, this bug was hidden by the automatic helper look-up
code. But it can be easily trigger if you attach the helper in
a non-standard port, eg.

iptables -I PREROUTING -t raw -p tcp --dport 8888 \
	-j CT --helper ftp

And you disabled the automatic helper assignment.

I added the IPS_HELPER_BIT that allows us to differenciate between
a helper that has been explicitly attached and those that have been
automatically assigned. I didn't come up with a better solution
(having backward compatibility in mind).
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This refreshes the "timeout" attribute in existing expectations if one is
given.

The use case for this would be for userspace helpers to extend the lifetime
of the expectation when requested, as this is not possible right now
without deleting/recreating the expectation.

I use this specifically for forwarding DCERPC traffic through:

DCERPC has a port mapper daemon that chooses a (seemingly) random port for
future traffic to go to. We expect this traffic (with a reasonable
timeout), but sometimes the port mapper will tell the client to continue
using the same port. This allows us to extend the expectation accordingly.
Signed-off-by: NKelvie Wong <kelvie@ieee.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

To build ip_vs as a module sysctl_rmem_max and sysctl_wmem_max
needs to be exported.

The dependency was added by "ipvs: wakeup master thread" patch.
Signed-off-by: NHans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Functions not referenced outside of a source file should be marked
static to prevent it from being exposed globally.

This quiets the sparse warnings:

warning: symbol '__ipvs_proto_data_get' was not declared. Should it be static?
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

Functions not referenced outside of a source file should be marked
static to prevent it from being exposed globally.

This quiets the sparse warnings:

warning: symbol 'ip_vs_ftp_init' was not declared. Should it be static?
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	cp->flags is marked volatile but ip_vs_bind_dest
can safely modify the flags, so save some CPU cycles by
using temp variable.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	Allow master and backup servers to use many threads
for sync traffic. Add sysctl var "sync_ports" to define the
number of threads. Every thread will use single UDP port,
thread 0 will use the default port 8848 while last thread
will use port 8848+sync_ports-1.

	The sync traffic for connections is scheduled to many
master threads based on the cp address but one connection is
always assigned to same thread to avoid reordering of the
sync messages.

	Remove ip_vs_sync_switch_mode because this check
for sync mode change is still risky. Instead, check for mode
change under sync_buff_lock.

	Make sure the backup socks do not block on reading.

Special thanks to Aleksey Chudov for helping in all tests.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Tested-by: NAleksey Chudov <aleksey.chudov@gmail.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	Add two new sysctl vars to control the sync rate with the
main idea to reduce the rate for connection templates because
currently it depends on the packet rate for controlled connections.
This mechanism should be useful also for normal connections
with high traffic.

sync_refresh_period: in seconds, difference in reported connection
	timer that triggers new sync message. It can be used to
	avoid sync messages for the specified period (or half of
	the connection timeout if it is lower) if connection state
	is not changed from last sync.

sync_retries: integer, 0..3, defines sync retries with period of
	sync_refresh_period/8. Useful to protect against loss of
	sync messages.

	Allow sysctl_sync_threshold to be used with
sysctl_sync_period=0, so that only single sync message is sent
if sync_refresh_period is also 0.

	Add new field "sync_endtime" in connection structure to
hold the reported time when connection expires. The 2 lowest
bits will represent the retry count.

	As the sysctl_sync_period now can be 0 use ACCESS_ONCE to
avoid division by zero.

	Special thanks to Aleksey Chudov for being patient with me,
for his extensive reports and helping in all tests.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Tested-by: NAleksey Chudov <aleksey.chudov@gmail.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	High rate of sync messages in master can lead to
overflowing the socket buffer and dropping the messages.
Fixed sleep of 1 second without wakeup events is not suitable
for loaded masters,

	Use delayed_work to schedule sending for queued messages
and limit the delay to IPVS_SYNC_SEND_DELAY (20ms). This will
reduce the rate of wakeups but to avoid sending long bursts we
wakeup the master thread after IPVS_SYNC_WAKEUP_RATE (8) messages.

	Add hard limit for the queued messages before sending
by using "sync_qlen_max" sysctl var. It defaults to 1/32 of
the memory pages but actually represents number of messages.
It will protect us from allocating large parts of memory
when the sending rate is lower than the queuing rate.

	As suggested by Pablo, add new sysctl var
"sync_sock_size" to configure the SNDBUF (master) or
RCVBUF (slave) socket limit. Default value is 0 (preserve
system defaults).

	Change the master thread to detect and block on
SNDBUF overflow, so that we do not drop messages when
the socket limit is low but the sync_qlen_max limit is
not reached. On ENOBUFS or other errors just drop the
messages.

	Change master thread to enter TASK_INTERRUPTIBLE
state early, so that we do not miss wakeups due to messages or
kthread_should_stop event.

Thanks to Pablo Neira Ayuso for his valuable feedback!
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	As the goal is to mirror the inactconns/activeconns
counters in the backup server, make sure the cp->flags are
updated even if cp is still not bound to dest. If cp->flags
are not updated ip_vs_bind_dest will rely only on the initial
flags when updating the counters. To avoid mistakes and
complicated checks for protocol state rely only on the
IP_VS_CONN_F_INACTIVE bit when updating the counters.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Tested-by: NAleksey Chudov <aleksey.chudov@gmail.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	Initially, when the synced connection is created we
use the forwarding method provided by master but once we
bind to destination it can be changed. As result, we must
update the application and the transmitter.

	As ip_vs_try_bind_dest is called always for connections
that require dest binding, there is no need to validate the
cp and dest pointers.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	As the IP_VS_CONN_F_INACTIVE bit is properly set
in cp->flags for all kind of connections we do not need to
add special checks for synced connections when updating
the activeconns/inactconns counters for first time. Now
logic will look just like in ip_vs_unbind_dest.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	As IP_VS_CONN_F_NOOUTPUT is derived from the
forwarding method we should get it from conn_flags just
like we do it for IP_VS_CONN_F_FWD_MASK bits when binding
to real server.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

Use GFP_KERNEL instead of GFP_ATOMIC when registering an ipvs protocol.

This is safe since it will always run from a process context.
Signed-off-by: NSasha Levin <levinsasha928@gmail.com>
Acked-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

        Schedulers are initialized and bound to services only
on commands.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	Schedulers are initialized and bound to services only
on commands.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	Schedulers are initialized and bound to services only
on commands.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	Schedulers are initialized and bound to services only
on commands.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	Schedulers are initialized and bound to services only
on commands.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

	They are called only on initialization.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

if net.bridge.bridge-nf-filter-vlan-tagged sysctl is enabled, bridge
netfilter removes the vlan header temporarily and then feeds the packet
to ip(6)tables.

When the new "bridge-nf-pass-vlan-input-device" sysctl is on
(default off), then bridge netfilter will also set the
in-interface to the vlan interface; if such an interface exists.

This is needed to make iptables REDIRECT target work with
"vlan-on-top-of-bridge" setups and to allow use of "iptables -i" to
match the vlan device name.

Also update Documentation with current brnf default settings.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NBart De Schuymer <bdschuym@pandora.be>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

this_cpu_inc() is IRQ safe and faster than
local_bh_disable()/__this_cpu_inc()/local_bh_enable(), at least on x86.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch allows you to disable automatic conntrack helper
lookup based on TCP/UDP ports, eg.

echo 0 > /proc/sys/net/netfilter/nf_conntrack_helper

[ Note: flows that already got a helper will keep using it even
  if automatic helper assignment has been disabled ]

Once this behaviour has been disabled, you have to explicitly
use the iptables CT target to attach helper to flows.

There are good reasons to stop supporting automatic helper
assignment, for further information, please read:

http://www.netfilter.org/news.html#2012-04-03

This patch also adds one message to inform that automatic helper
assignment is deprecated and it will be removed soon (this is
spotted only once, with the first flow that gets a helper attached
to make it as less annoying as possible).
Signed-off-by: NEric Leblond <eric@regit.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

* ret variable initialization removed as useless
* similar code strings concatenated and functions code
  flow became more plain
Signed-off-by: NTony Zelenoff <antonz@parallels.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Make the return value explicitly true or false.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows the GPIO/LED settings to be configured by the
EEPROM if present, and only sets the default values (LED outputs
for link/activity) when an EEPROM is not detected.
Signed-off-by: NSteve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>