This patch includes minor "sparse -Wbitwise" updates for the PCI based
HCDs.  Almost all of them involve just changing the second parameter of the
suspend() method to a pm_message_t ...  the others relate to how the EHCI
code walks in-memory data structures.  (There's a minor bug fixed there too
...  affecting the big-endian sysfs async schedule dump.)
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>


Index: gregkh-2.6/drivers/usb/core/hcd.h
===================================================================

This is the first of a few installments of PM API updates to match the
recent switch to "pm_message_t".  This installment primarily affects
USB device drivers (for USB interfaces), and it changes the handful of
drivers which currently implement suspend methods:

    - <linux/usb.h> and usbcore, signature change

    - Some drivers only changed the signature, net effect this just
      shuts up "sparse -Wbitwise":
	* hid-core
	* stir4200

    - Two network drivers did that, and also grew slightly more
      featureful suspend code ... they now properly shut down
      their activities.  (As should stir4200...)
	* pegasus
	* usbnet

Note that the Wake-On-Lan (WOL) support in pegasus doesn't yet work; looks
to me like it's missing a request to turn it on, vs just configuring it.
The ASIX code in usbnet also has WOL hooks that are ready to use; untested.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/net/irda/stir4200.c
===================================================================

This has a variety of updates to the shared suspend/resume code for
PCI based USB host controllers.

    - Cope with pm_message_t replacing the target system state.
      This is actually a loss of functionality; PCI D1 and D2
      states will no longer be used, and it's no longer knowable
      that D3cold is on the way so power will be lost.

    - Most importantly, some of the resume paths are reworked and
      cleaned up.  They're now an exact mirror of suspend paths,
      and more care is taken to ensure the hardware is reactivated
      before the hardware re-enables interrupts.

Plus comment and diagnostic cleanups; there are some nasty cases here 
especially combined with swsusp, now they're somewhat commented.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -puN drivers/usb/core/hcd-pci.c~usb-resume-fixes drivers/usb/core/hcd-pci.c

With older gcc's:

In file included from drivers/usb/class/cdc-acm.c:63:
include/linux/usb_cdc.h:117: field `bDetailData' has incomplete type
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -puN include/linux/usb_cdc.h~usb_cdc-build-fix include/linux/usb_cdc.h

Here's a tiny patch to add support for the Tapwave Zodiac (for
2.6.11.6).  I've been meaning to send it in for a while but kept
upgrading my kernel and losing the changes :-)  I own the device and it
works fine with the latest pilot-link beta.

From: Larry Battraw <lbattraw@insightbb.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Thanks to Jamieson Becker <jamie@jamiebecker.com> for the info
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -Naur -X dontdiff-osdl tmp/linux-2.6.12-rc2/drivers/usb/serial/visor.h linux-2.6/drivers/usb/serial/visor.h

This adds the missing arch/arm/lib/bitops.h file.

Like Alpha, sparc64's struct stat was defined before we had the
nanosecond et al.  fields added.  So like Alpha I have to cons up a
struct stat64 to get this stuff.  I'll work on the glibc bits soon. 

Also, we were forgetting to fill in the nanosecond fields in the sparc
compat stat64 syscalls. 
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

Done with "git-pull-script rsync://www.parisc-linux.org/~jejb/scsi-rc-fixes-2.6.git"
together with an automated content merge.

Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds 32-bit compatibility for mounting an NFSv4 mount on a 64-bit
kernel (such as happens with PPC64). 

The problem is that the mount data for the NFS4 mount process includes
auxilliary data pointers, probably because the NFS4 mount data may
conceivably exceed PAGE_SIZE in size - thus breaking against the hard
limit imposed by sys_mount(). 
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes a deadlock on the dcache lock detected during testing at IBM
by moving the logging of the current executable information from the
SELinux avc_audit function to audit_log_exit (via an audit_log_task_info
helper) for processing upon syscall exit. 

For consistency, the patch also removes the logging of other
task-related information from avc_audit, deferring handling to
audit_log_exit instead. 

This allows simplification of the avc_audit code, allows the exe
information to be obtained more reliably, always includes the comm
information (useful for scripts), and avoids including bogus task
information for checks performed from irq or softirq. 
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The recent acpi boot patch breaks for me: acpi_fadt needs CONFIG_ACPI_BUS.
Signed-off-By: NChris Wedgwood <cw@f00f.org>
Acked-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The compat routine to copy over this data structure was not
handling SI_POLL correctly, breaking various fcntl() variants
in compat tasks.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We were flushing the D-cache excessively for ptrace() processing
and this makes debugging threads so slow as to be totally unusable.

All process page accesses via ptrace() go via access_process_vm().
This routine, for each process page, uses get_user_pages().  That
in turn does a flush_dcache_page() on the child pages before we
copy in/out the ptrace request data.

Therefore, all we need to do after the data movement is:

1) Flush the D-cache pages if the kernel maps the page to a different
   color than userspace does.
2) If we wrote to the page, we need to flush the I-cache on older cpus.

Previously we just flushed the entire cache at the end of a ptrace()
request, and that was beyond stupid.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

SunOS aparently had this weird PTRACE_CONT semantic which
we copied.  If the addr argument is something other than
1, it sets the process program counter to whatever that
value is.

This is different from every other Linux architecture, which
don't do anything with the addr and data args.

This difference in particular breaks the Linux native GDB support
for fork and vfork tracing on sparc and sparc64.

There is no interest in running SunOS binaries using this weird
PTRACE_CONT behavior, so just delete it so we behave like other
platforms do.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A couple message queue system call entries for compat tasks
were not using the necessary compat_sys_*() functions, causing
some glibc test cases to fail.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This case actually can get exercised a lot during an ELF
coredump of a process which contains a lot of non-COW'd
anonymous pages.  GDB has this test case which in partiaular
creates near terabyte process full of ZERO_PAGEes.  It takes
forever to just walk through the page tables because of
all of these spurious cache flushes on sparc64.

With this change it takes only a second or so.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

First ever true git merge. Let's see if it actually works.

This reverts a fs/char_dev.c patch that was merged into BK on March 3.

The problem is that it breaks things ... __register_chrdev_region() has
a block of code, commented "temporary" for over two years now, which
fails rudely during PCMCIA initialization or other register_chrdev()
calls, because it doesn't "degrade to linked list".  This keeps whole
subsystems from working.

A real fix to that "temporary" code should be possible, using some better
scheme to allocate major numbers, but it's not something I want to spend
time on just now.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix debug EBSA285 and RiscPC debugging macros to detect whether the
MMU is enabled.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

Convert ARM bitop assembly to a macro.  All bitops follow the same
format, so it's silly duplicating the code when only one or two
instructions are different.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

Fix show_regs() to provide a backtrace.  Provide a new __show_regs()
function which implements the common subset of show_regs() and die().
Add prototypes to asm-arm/system.h
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

h3600_irda_set_speed() had the wrong type for the "speed" argument.
Fix this.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

The footbridge ISA RTC was being initialised before we had setup the
kernel timer.  This caused a divide by zero error when the current
time of day is set.  Resolve this by initialising the RTC after
the kernel timer has been initialised.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>

We have a DID_IMM_RETRY to require a retry at once, but we could do with
a DID_REQUEUE to instruct the mid-layer to treat this command in the
same manner as QUEUE_FULL or BUSY (i.e. halt the submission until
another command returns ... or the queue pressure builds if there are no
outstanding commands).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

From: Andreas Herrmann <aherrman@de.ibm.com>

This patch mainly introduces support for point-2-point
topology.

From: Heiko Carstens <heiko.carstens@de.ibm.com>
From: Maxim Shchetynin <maxim@de.ibm.com>
From: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Also broken design in its compat handlers - CONFIG_COMPAT doesn't 
mean that there should be no native ioctls.
Signed-off-by: NAndi Kleen <ak@muc.de>

Reworked with comments from Markus Lidel by:
Christoph Hellwig <hch@infradead.org>

Rejections fixed and
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix up two drivers that incorrectly were using the old return values for
their new-style EH methods and kill off scsi_obsolete.h that defined the
constants.  The initio driver has all these constansts defined locally
and uses them internally, I'll fix that up some time later.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

scsi_cmnd->serial_number_at_timeout doesn't serve any purpose
anymore.  All serial_number == serial_number_at_timeout tests
are always true in abort callbacks.  Kill the field.  Also, as
->pid always equals ->serial_number and ->serial_number
doesn't have any special meaning anymore, update comments
above ->serial_number accordingly.  Once we remove all uses of
this field from all lldd's, this field should go.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

scsi_cmnd->internal_timeout field doesn't have any meaning
anymore.  Kill the field.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

We have the scsi_print_* functions in the proper namespace for a long
time now and there weren't a lot users left.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Adapted from a patch in SuSE's kernel SRPM.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The conditions that cause these calls to MD_BUG are not kernel bugs, just
oddities in what userspace is asking for.

Also convert analyze_sbs to return void, and the value it returned was
always 0.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is a tiny race when de-registering an MD thread, in that the thread
could disappear before it is set a SIGKILL, causing send_sig to have
problems.  

This is most easily closed by holding tasklist_lock between enabling the
thread to exit (setting ->run to NULL) and telling it to exit.

(akpm: ick.  Needs to use kthread API and stop using signals)
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch does the long overdue updates to MAINTAINERS file for aty128fb
and radeonfb.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>