Without this, a Debian jessie nfsroot hangs early in the boot process.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org>
[horms+renesas@verge.net.au: resolved trivial conflict]
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This enables block layer, R-Car SATA and SCSI disk in koelsch_defconfig.
Signed-off-by: NValentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This enables R-Car VIN SoC camera along with ADV7180 decoder,
which can be found on Lager board, to lager_defconfig.
Signed-off-by: NValentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

TI_EDMA fell out of automatically selected options in the multi_v7
defconfig due to a select being removed from the davinci Kconfig entry. So
we need to re-enable explicitly to not regress some platforms.

The rest is just the result of running 'make multi_v7_defconfig + make
savedefconfig' to remove entries that are no longer needed due to changed
dependencies/selects or defaults.
Signed-off-by: NOlof Johansson <olof@lixom.net>

Recent boot farm testing has highlighted some issues with mvebu and
multiplatform kernels.  Increase the test coverage so we can discover
these issues earlier.
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Select CONFIG_AT803X_PHY so that we can boot hummingboard via NFS.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Drop automatic selection of TI_EDMA from Keystone Kconfig file,
as it produces build warning in case if CONFIG_DMADEVICES is not set:

warning: (ARCH_KEYSTONE) selects TI_EDMA which has unmet direct dependencies (DMADEVICES && (ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE))

Instead enable TI EDMA support from defconfig.
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

DEBUG_FS used to be selected by COMMON_CLK_DEBUG, which was enabled
by tegra_defconfig. However, this config option no longer exists, so
no longer selects DEBUG_FS, and nothing else selects it either. So,
"make tegra_defconfig" no longer enables DEBUG_FS in .config.

Rebuild tegra_defconfig on top of next-20140424, while manually
re-enabling DEBUG_FS.

Reasons for removed entries are:
- I2C_MUX: selected by MEDIA_SUBDRV_AUTOSELECT
- DRM_PANEL: selected by DRM_TEGRA
- NEW_LEDS: selected by many things; at least VT
- LEDS_CLASS: selected by many things; at least VT
- LEDS_TRIGGERS: selected by many things; at least VT
- COMMON_CLK_DEBUG: no longer exists
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

multi_v7_defconfig was missing a large number of options that were in
tegra_defconfig. This patch adds them. The changes fall into the
following categories:

* Enable more Tegra SoC options/drivers.
* Enable more drivers for Tegra boards.
* Enable more options that are useful for running distros.

The patch removes a few lines as well, simply because those options are
now selected by something else, and "make savedefconfig" removes them. I
verified that the options appear in .config after
"make multi_v7_defconfig".
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This allows us to probe the clock controller devices and boot to a
serial console on all DT enabled MSM platforms.

Cc: David Brown <davidb@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This change introduces debugfs support for the BCM281xx watchdog driver.
Signed-off-by: NMarkus Mayer <markus.mayer@linaro.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This commit adds support for the watchdog timer used on the BCM281xx
family of SoCs.
Signed-off-by: NMarkus Mayer <markus.mayer@linaro.org>
Reviewed-by: NMatt Porter <matt.porter@linaro.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Adds pinctrl driver for Broadcom Capri (BCM281xx) SoCs.

v4: - PINCTRL selected in Kconfig, PINCTRL_CAPRI selected in bcm_defconfig
    - make use of regmap
    - change CAPRI_PIN_UPDATE from macro to inline function.
    - Handle pull-up strength arg in Ohm instead of enum
v3: Re-work driver to be based on generic pin config. Moved config selection
    from Kconfig to bcm_defconfig.
v2: Use hyphens instead of underscore in DT property names.
Signed-off-by: NSherman Yin <syin@broadcom.com>
Reviewed-by: NChristian Daudt <bcm@fixthebug.org>
Reviewed-by: NMatt Porter <matt.porter@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

ARCH_MSM is a hidden config option now so this defconfig needs to
be updated to select ARCH_MSM_DT instead. While we're here,
remove dead symbols (SSBI), drop selected symbols (ZRELADDR,
PHYLIB, USB_PHY) and enable the MSM random driver (HW_RANDOM_MSM).

Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

Modifying the omap2plus_defconfig to enable the audio support for
AM335x EVM and other AM33xx based devices with TLV320AIC3X connected
to McASP.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Enable this option as it's required to use USB on AM335x SoC.
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

I recently noticed slow booting of a board, and without printk timestamps it's
harder to tell just where the delays are coming from. Enable it.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Rebuild bcm2835_defconfig using "make bcm2835_defconfig;
make savedefconfig", and add the following features:

* Enable the DWC2 USB controller present in the BCM2835 SoC.
* Enable drivers for various USB-hosted devices, which make the
  controller useful.
Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch enables MSM8974 build support.
Signed-off-by: NRohit Vaswani <rvaswani@codeaurora.org>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

PFUZE100 regulator is commonly found on mx6 based designs.

Add support for it.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Let MX35 and MX50 device tree support be built by default.

Generated by doing:

- Selected CONFIG_MACH_IMX35_DT and CONFIG_SOC_IMX50 via 'make menuconfig'
- make savedefconfig
- cp defconfig arch/arm/configs/imx_v6_v7_defconfig
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Update the IMX v6/v7 defconfig for the SolidRun HummingBoard:
- Add AT803X ethernet phy
- Add consumer IR devices
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Enable STMPE touchscreen support as this is used on M53EVK.
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

The MOXA ART SoC is based on Faraday's FA526. This is a ARMv4 32-bit
192 MHz CPU with MMU and 16KB/8KB D/I-cache.

Add platform support for this SoC.

Also add UC-7112-LX as a machine.
Signed-off-by: NJonas Jensen <jonas.jensen@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

S2MPS11 voltage regulator is commonly used on the latest Exynos
boards like SMDK5420, Arndale-Octa, etc. Hence it makes sense to
enable it like S5M8767A voltage regulator.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This adds the LEDs and triggers used by the Versatile boards to
the default configuration.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This should work just fine on this purely v5 platform, so let's
config it for EABI by default.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Select the GPIOLIB and PL061 in the Versatile defconfig, as this
is present on all boards, and so we get compile and test coverage
for this.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This updates the Versatile defconfig to the thing saved by
savedefconfig so we don't get confusing diffs when trying to
modify other options.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Enable DRM panel core support along with support for various simple
panels.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
[nicolas.ferre@atmel.com: typo, nodes in address ascending order, shrink cmdline]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

CONFIG_INOTIFY_USER and CONFIG_UNIX are required for udev to function.
This change brings the koelsch defconfig into line with
other shmobile defconfigs.
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

CONFIG_PACKET is required for the ISC dhcpd daemon function.
This change brings the koelsch defconfig into line with
other shmobile defconfigs.
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The backlight is controlled by a PWM signal generated by the TPU.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Add default config for arch-hi3xxx. It's used for Hisilicon Hi3xxx SoC.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

Enable ARCH_HI3xxx in multi_v7_defconfig.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

Enable the USB support (Host mode only) on TI's Keystone platform.
It also enables the support of usb mass storage, FAT and Ext4
filesystems to test rootfs mount over an USB disk.

Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NWingMan Kwok <w-kwok2@ti.com>

There are still some missing parts (e.g. board support, device trees),
but with these bits added on top of this patch I can successfully boot a
EFM32GG-DK3750 board that uses an EFM32GG990F1024.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Support for Trusted Foundations is light and allows the kernel to run on
a wider range of devices, so enable it by default.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>