- 30 6月, 2010 11 次提交
-
-
由 Daniel Sangorrin 提交于
This patch corrects a problem with the merge of a previous patch to add the CONTEC identifier. I believe the merge problem occurred with the commit: dee5658b Originally I submitted a patch and then they asked me to order the IDs and resubmit, so did I. But unfortunately in the end somehow both patches were merged. Signed-off-by: NDaniel Sangorrin <daniel.sangorrin@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1401) fixes a bug in usb_sg_init() that can cause an invalid pointer dereference. An inner loop reuses some local variables in an unsafe manner, so new variables are introduced. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Tested-by: NAjay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Vladimir Zapolskiy 提交于
Gadget disconnect must be called before unbinding to avoid races. The change fixes an oops on g_ether module unregistering. Signed-off-by: NVladimir Zapolskiy <vzapolskiy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Wolfram Sang 提交于
The old code registered the hcd even if there were no transceivers detected, leading to oopses like this if we try to probe a non-existant ULPI: [ 2.730000] mxc-ehci mxc-ehci.0: unable to init transceiver [ 2.740000] timeout polling for ULPI device [ 2.740000] timeout polling for ULPI device [ 2.750000] mxc-ehci mxc-ehci.0: unable to enable vbus on transceiver [ 2.750000] mxc-ehci mxc-ehci.0: Freescale On-Chip EHCI Host Controller [ 2.760000] mxc-ehci mxc-ehci.0: new USB bus registered, assigned bus number 2 [ 2.770000] Unhandled fault: external abort on non-linefetch (0x808) at 0xc4876184 [ 2.770000] Internal error: : 808 [#1] PREEMPT [ 2.770000] last sysfs file: [ 2.770000] Modules linked in: [ 2.770000] CPU: 0 Not tainted (2.6.33.5 #5) [ 2.770000] PC is at ehci_hub_control+0x4d4/0x8f8 [ 2.770000] LR is at ehci_mxc_setup+0xbc/0xdc [ 2.770000] pc : [<c0196dfc>] lr : [<c019bc8c>] psr: 00000093 [ 2.770000] sp : c3815e40 ip : 00000001 fp : 60000013 [ 2.770000] r10: c4876184 r9 : 00000000 r8 : c3814000 [ 2.770000] r7 : c391d2cc r6 : 00000001 r5 : 00000001 r4 : 00000000 [ 2.770000] r3 : 80000000 r2 : 00000007 r1 : 80000000 r0 : c4876184 [ 2.770000] Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 2.770000] Control: 0005317f Table: a0004000 DAC: 00000017 [ 2.770000] Process swapper (pid: 1, stack limit = 0xc3814270) ... Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable <stable@kernel.org> Acked-by: NDaniel Mack <daniel@caiaq.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Wolfram Sang 提交于
otg_read may return errnos, so bail out correctly to prevent bogus ID-numbers. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: NDaniel Mack <daniel@caiaq.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Maulik Mankad 提交于
As a part of aligning the ISR code for MUSB with the specs, the ISR code was re-written. See Commit 1c25fda4 (usb: musb: handle irqs in the order dictated by programming guide) With this the suspend interrupt came accidently under CONFIG_USB_MUSB_HDRC_HCD. The fix brings suspend interrupt handling outside CONFIG_USB_MUSB_HDRC_HCD. Signed-off-by: NMaulik Mankad <x0082077@ti.com> Cc: David Brownell <david-b@pacbell.net> Acked-by: NFelipe Balbi <felipe.balbi@nokia.com> Cc: stable <stable@kernel.org> [.34] Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nobuhiro Iwamatsu 提交于
In the change by 749da5f8, The change in the status when the USB device is connected is wrong. Therefore, the device is not recognized. Acked-by: NAlan Stern <stern@rowland.harvard.edu> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Paul Mundt" <lethal@linux-sh.org> Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sarah Sharp 提交于
Commit 6c12db90 introduced a bug for control transfers. The patch was supposed to change when the link TRBs at the end of each ring segment were given to the hardware. If a transfer descriptor (TD) ended just before the link TRB, the code wouldn't give back the link TRB to the hardware; instead it would be given back in prepare_ring() just before the next TD was enqueued at the top of the ring. Unfortunately, the code relied on checking the chain bit of the TRB to determine whether the TD ended just before the link TRB. It assumed that the ring enqueuing code would call prepare_ring() before enqueuing the next TD. However, control transfers are made of multiple TDs, and prepare_ring() is only called once before enqueuing two or three TDs. If the first or second TD of the control transfer ended just before the link TRB, then the code in inc_enq() would not move the enqueue pointer past the link TRB, and the link TRB would get overwritten. This would cause the xHCI driver to start writing to memory past the ring segment, and eventually the system would crash or hang. The fix is to add a flag to inc_enq() that says whether the caller will enqueue more TDs before calling prepare_ring(). If the chain bit is cleared (meaning this is the last TRB in a TD), and the caller will not enqueue more TDs, then we defer giving back the link TRB. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michal Nazarewicz 提交于
During __gfs_do_config() some invalid pointers may be left in usb_configuration::interfaces array from previous calls to the __gfs_do_config() for the same configuration. This will always happen if an user space function which has a fewer then the last user space function registers itself. Composite's set_config() function that a pointer after the last interface in usb_configuration::interface is NULL unless the array is full. This patch makes the __gfs_do_config() make sure that if the usb_configuration::interface is not full then a pointer after the last interface is NULL. Signed-off-by: NMichal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jon Povey 提交于
Call put_tty_driver() in cleanup function, to fix Oops when trying to open gadget serial char device after module unload. Signed-off-by: NJon Povey <jon.povey@racelogic.co.uk> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jon Povey 提交于
No longer set low_latency flag as it causes this warning backtrace: WARNING: at kernel/mutex.c:207 __mutex_lock_slowpath+0x6c/0x288() Fix associated locking and wakeups. Signed-off-by: NJon Povey <jon.povey@racelogic.co.uk> Cc: Maulik Mankad <x0082077@ti.com> Cc: stable <stable@kernel.org> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 28 6月, 2010 4 次提交
-
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md/raid5: don't include 'spare' drives when reshaping to fewer devices. md/raid5: add a missing 'continue' in a loop. md/raid5: Allow recovered part of partially recovered devices to be in-sync md/raid5: More careful check for "has array failed". md: Don't update ->recovery_offset when reshaping an array to fewer devices. md/raid5: avoid oops when number of devices is reduced then increased. md: enable raid4->raid0 takeover md: clear layout after ->raid0 takeover md: fix raid10 takeover: use new_layout for setup_conf md: fix handling of array level takeover that re-arranges devices. md: raid10: Fix null pointer dereference in fix_read_error() Restore partition detection of newly created md arrays.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: fix first chunk match in per_cpu_ptr_to_phys() percpu: fix trivial bugs in pcpu_build_alloc_info()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (52 commits) phylib: Add autoload support for the LXT973 phy. ISDN: hysdn, fix potential NULL dereference vxge: fix memory leak in vxge_alloc_msix() error path isdn/gigaset: correct CAPI connection state storage isdn/gigaset: encode HLC and BC together isdn/gigaset: correct CAPI DATA_B3 Delivery Confirmation isdn/gigaset: correct CAPI voice connection encoding isdn/gigaset: honor CAPI application's buffer size request cpmac: do not leak struct net_device on phy_connect errors smc91c92_cs: fix the problem that lan & modem does not work simultaneously ipv6: fix NULL reference in proxy neighbor discovery Bluetooth: Bring back var 'i' increment xfrm: check bundle policy existance before dereferencing it sky2: enable rx/tx in sky2_phy_reinit() cnic: Disable statistics initialization for eth clients that do not support statistics net: add dependency on fw class module to qlcnic and netxen_nic snmp: fix SNMP_ADD_STATS() hso: remove setting of low_latency flag udp: Fix bogus UFO packet generation lasi82596: fix netdev_mc_count conversion ...
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFSv4: Fix an embarassing typo in encode_attrs() NFSv4: Ensure that /proc/self/mountinfo displays the minor version number NFSv4.1: Ensure that we initialise the session when following a referral SUNRPC: Fix a re-entrancy bug in xs_tcp_read_calldir() nfs4 use mandatory attribute file type in nfs4_get_root
-
- 27 6月, 2010 21 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: clocksource: sh_cmt: Fix up bogus shift value. arch/sh/mm: Eliminate a double lock sh: Fix up IORESOURCE_PCI_FIXED usage in pcibios_fixup_device_resources(). sh: remove duplicated #include
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: MAINTAINERS - Add an entry for the input MT protocol Input: wacom - fix serial number handling on Cintiq 21UX2 Input: fixup X86_MRST selects Input: sysrq - fix "stuck" SysRq mode Input: ad7877 - fix spi word size to 16 bit Input: pcf8574_keypad - fix off by one in pcf8574_kp_irq_handler()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: ext3: update ctime when changing the file's permission by setfacl ext2: update ctime when changing the file's permission by setfacl
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6由 Linus Torvalds 提交于
* 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6: virtio-pci: disable msi at startup virtio: return ENOMEM on out of memory
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI/PM: Do not use native PCIe PME by default
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: usb/endpoint, fix dangling pointer use ALSA: asihpi - Get rid of incorrect "long" types and casts. ASoC: DaVinci: Fix McASP hardware FIFO configuration ALSA: hda - Fix line-in for mb5 model MacBook (Pro) 5,1 / 5,2 ALSA: usb-audio: fix UAC2 control value queries ALSA: usb-audio: parse UAC2 sample rate ranges correctly ALSA: usb-audio: fix control messages for USB_RECIP_INTERFACE ALSA: usb-audio: add check for faulty clock in parse_audio_format_rates_v2() ALSA: hda - Don't check capture source mixer if no ADC is available
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (k8temp) Bypass core swapping on single-core processors hwmon: (i5k_amb) Fix sysfs attribute for lockdep hwmon: (k10temp) Do not blacklist known working CPU models
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: at32ap700x_wdt: register misc device last in probe() function watchdog: [PATCH 3/3] imx2_wdt: fix section mismatch
-
git://git.infradead.org/iommu-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/iommu-2.6: intel-iommu: Force-disable IOMMU for iGFX on broken Cantiga revisions. intel-iommu: Fix double lock in get_domain_for_dev() intel-iommu: Fix reference by physical address in intel_iommu_attach_device()
-
git://gitorious.org/linux-omap-dss2/linux由 Linus Torvalds 提交于
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: OMAP: OMAPFB: fix rfbi.c compile error OMAPFB: LCDC: change update_mode to DISABLED when going suspend
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: MAINTAINERS: change mailing list address for CIFS cifs: remove bogus first_time check in NTLMv2 session setup code cifs: don't call cifs_new_fileinfo unless cifs_open succeeds cifs: don't ignore cifs_posix_open_inode_helper return value cifs: clean up arguments to cifs_open_inode_helper cifs: pass instantiated filp back after open call cifs: move cifs_new_fileinfo call out of cifs_posix_open cifs: implement drop_inode superblock op cifs: don't attempt busy-file rename unless it's in same directory
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/5200: fix lite5200 ethernet phy address powerpc/5200: Fix build error in sound code. powerpc/5200: fix oops during going to standby powerpc/5200: add lite5200 onboard I2C eeprom and flash maintainers: Add git trees for SPI and device tree of: Drop properties with "/" in their name
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: Fix de2104x driver failing to readout MAC address correctly alpha: Detect Super IO chip, no IDE on Avanti, enable EPP19 alpha: fix pci_mmap_resource API breakage alpha: fix __arch_hweight32 typo
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix mpic_resume on early G5 macs powerpc: rtas_flash needs to use rtas_data_buf powerpc: Unconditionally enabled irq stacks powerpc/kexec: Wait for online/possible CPUs only. powerpc: Disable CONFIG_SYSFS_DEPRECATED powerpc/boot: Remove addRamdisk.c since it is now unused powerpc: Move kdump default base address to 64MB on 64bit powerpc: Remove dead CONFIG_HIGHPTE powerpc/fsl-booke: Move loadcam_entry back to asm code to fix SMP ftrace powerpc/fsl-booke: Fix InstructionTLBError execute permission check
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: TPM: ReadPubEK output struct fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: fix LOCALVERSION handling to match description kbuild: Fix modpost segfault
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / PM: Do not enable GPEs for system wakeup in advance ACPICA: Truncate I/O addresses to 16 bits for Windows compatibility ACPICA: Limit maximum time for Sleep() operator ACPICA: Fix namestring associated with AE_NO_HANDLER exception ACPI / ACPICA: Fix sysfs GPE interface ACPI / ACPICA: Fix GPE initialization ACPI / ACPICA: Avoid writing full enable masks to GPE registers ACPI / ACPICA: Fix low-level GPE manipulation code ACPI / ACPICA: Use helper function for computing GPE masks ACPI / ACPICA: Do not attempt to disable GPE when installing handler ACPI: Disable Vista compatibility for Sony VGN-NS50B_L ACPI: fan: fix unbalanced code block ACPI: Store NVS state even when entering suspend to RAM suspend: Move NVS save/restore code to generic suspend functionality ACPI: Do not try to set up acpi processor stuff on cores exceeding maxcpus= ACPI: acpi_pad: Don't needlessly mark LAPIC unstable
-
由 Dan Carpenter 提交于
This is from a Smatch check I'm writing. strncpy_from_user() returns -EFAULT on error so the first change just silences a warning but doesn't change how the code works. The other change is a bug fix because install_thread_keyring_to_cred() can return a variety of errors such as -EINVAL, -EEXIST, -ENOMEM or -EKEYREVOKED. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Woodhouse 提交于
Commit e13647c1 (phylib: Add support for the LXT973 phy.) added a new ID but neglected to also add it to the MODULE_DEVICE_TABLE. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Slaby 提交于
Stanse found that lp is dereferenced earlier than checked for being NULL in hysdn_rx_netpkt. Move the initialization below the test. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
When pci_enable_msix() returned ret<0, entries and vxge_entries were leaked. While at it, use the centralized exit idiom in the function. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Acked-by: NRam Vepa <ram.vepa@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2010 4 次提交
-
-
由 Tilman Schmidt 提交于
CAPI applications can handle several connections in parallel, so one connection state per application isn't sufficient. Store the connection state in the channel structure instead. Impact: bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Adapt to buggy device firmware which accepts setting HLC only in the same command line as BC, by encoding HLC and BC in a single command if both are specified, and rejecting HLC without BC. Impact: bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
The Gigaset CAPI driver handled all DATA_B3_REQ messages as if the Delivery Confirmation flag bit was set, delaying the emission of the DATA_B3_CONF reply until the data was actually transmitted. Some CAPI applications (notably Asterisk) aren't happy with that behaviour. Change it to actually evaluate the Delivery Confirmation flag as described the CAPI specification. Impact: bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Make the Gigaset CAPI driver select L2_VOICE (AT^SBPR=2) as the layer 2 encoding for transparent connections, like the ISDN4Linux variant. L2_BITSYNC (AT^SBPR=0) mutes internal connections and distorts external ones. Impact: bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-