The problem is that while we work w/o the inet_frags.lock even
read-locked the secret rebuild timer may occur (on another CPU, since
BHs are still disabled in the inet_frag_find) and change the rnd seed
for ipv4/6 fragments.

It was caused by my patch fd9e6354
([INET]: Omit double hash calculations in xxx_frag_intern) late 
in the 2.6.24 kernel, so this should probably be queued to -stable.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I got a problem when I wanted to check if the kernel supports process
event connector, and It seems there's no way to do this check.

At best I can check if the kernel supports connector or not, by looking
into /proc/net/netlink, or maybe checking the return value of bind() to
see if it's ENOENT.

So it would be useful to add /proc/net/connector to list all supported
connectors:
 # cat /proc/net/connector
 Name            ID
 connector       4294967295:4294967295
 cn_proc         1:1
 w1              3:1

Changelog:
- fix memory leak: s/seq_release/single_release
- use spin_lock_bh instead of spin_lock_irqsave
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix some doc comments to match function and attribute names in
net/netlink/attr.c.
Signed-off-by: NJulius Volz <juliusv@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I found another case where we are sending information to userspace
in the wrong HZ scale.  This should have been fixed back in 2.5 :-(

This means an ABI change but as it stands there is no way for an application
like ss to get the right value.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to the CONFIG_'s the value is anyway not correct in userspace.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit d62733c8
([SCHED]: Qdisc changes and sch_rr added for multiqueue)
added a NET_SCH_RR option that was unused since the code
went unconditionally into sch_prio.
Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Note, in the following patch, 'err' is initialized as:

int err = -ENOBUFS;
Signed-off-by: NWANG Cong <wcong@critical-links.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For n:1 'datagram connections' (eg /dev/log), the unix_dgram_sendmsg
routine implements a form of receiver-imposed flow control by
comparing the length of the receive queue of the 'peer socket' with
the max_ack_backlog value stored in the corresponding sock structure,
either blocking the thread which caused the send-routine to be called
or returning EAGAIN. This routine is used by both SOCK_DGRAM and
SOCK_SEQPACKET sockets. The poll-implementation for these socket types
is datagram_poll from core/datagram.c. A socket is deemed to be
writeable by this routine when the memory presently consumed by
datagrams owned by it is less than the configured socket send buffer
size. This is always wrong for PF_UNIX non-stream sockets connected to
server sockets dealing with (potentially) multiple clients if the
abovementioned receive queue is currently considered to be full.
'poll' will then return, indicating that the socket is writeable, but
a subsequent write result in EAGAIN, effectively causing an (usual)
application to 'poll for writeability by repeated send request with
O_NONBLOCK set' until it has consumed its time quantum.

The change below uses a suitably modified variant of the datagram_poll
routines for both type of PF_UNIX sockets, which tests if the
recv-queue of the peer a socket is connected to is presently
considered to be 'full' as part of the 'is this socket
writeable'-checking code. The socket being polled is additionally
put onto the peer_wait wait queue associated with its peer, because the
unix_dgram_recvmsg routine does a wake up on this queue after a
datagram was received and the 'other wakeup call' is done implicitly
as part of skb destruction, meaning, a process blocked in poll
because of a full peer receive queue could otherwise sleep forever
if no datagram owned by its socket was already sitting on this queue.
Among this change is a small (inline) helper routine named
'unix_recvq_full', which consolidates the actual testing code (in three
different places) into a single location.
Signed-off-by: NRainer Weikusat <rweikusat@mssgmbh.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an skb has nr_frags set to zero but its frag_list is not empty (as
it can happen if software LRO is enabled), and a previous
tcp_read_sock has consumed the linear part of the skb, then
__skb_splice_bits:

(a) incorrectly reports an error and

(b) forgets to update the offset to account for the linear part

Any of the two problems will cause the subsequent __skb_splice_bits
call (the one that handles the frag_list skbs) to either skip data,
or, if the unadjusted offset is greater then the size of the next skb
in the frag_list, make tcp_splice_read loop forever.
Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tcp_mem array which contains limits on the total amount of memory
used by TCP sockets is calculated based on nr_all_pages.  On a 32 bits
x86 system, we should base this on the number of lowmem pages.
Signed-off-by: NMiquel van Smoorenburg <miquels@cistron.nl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAndre Haupt <andre@bitwigglers.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes an oops in several failure paths in key allocation. This
Oops occurs when freeing a key that has not been linked yet, so the
key->sdata is not set.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

clock is already cpu-endian (see le32_to_cpu slightly before), so
le64_to_cpu doesn't make much sense.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes a circular locking dependency in the workqueue handling.
The interface work task uses the mac80211 function
ieee80211_iterate_active_interfaces() which grabs the RTNL lock.

However when the interface is brough down, this happens under the RTNL
lock as well, this causes problems because mac80211 will flush the workqueue
during the ifdown event. This causes mac80211 to wait until the driver has
completed all work which can't finish because it is waiting on the RTNL lock.

This is fixed by moving rt2x00 workqueue tasks on a different workqueue,
this workqueue can be flushed when the ieee80211_hw structure is removed
by the driver (when the driver is unloaded) which does not happen under the
RTNL lock.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

dev_close() must be called holding the RTNL.  Compile-tested only.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

dev_close() must be called holding the RTNL.  Compile-tested only.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

s2io has IOMMU overflow checking, but unfortunately it is wrong.

It didn't use the standard macros, which meant that it only worked
on POWER and SPARC because only those define DMA_ERROR_CODE. Convert it to
use the standard macros instead.

I also commented two more bugs in the IOMMU handling. It assumes
that 0 DMA addresses cannot happen, but that's not true in all IOMMU setups.
The information if a buffer has been already mapped needs to be stored
elsewhere.

Didn't fix those because it needs careful checking of the buffer handling
by the maintainers.

Cc: ram.vepa@neterion.com
Cc: santosh.rastapur@neterion.com
Cc: sivakumar.subramani@neterion.com
Cc: sreenivasa.honnur@neterion.com
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

When enabling TSO via ethool on e1000, it is possible to set
NETIF_F_TSO6 on hardware that does not support it.  Setting TSO via
ethtool now matches the settings used when the hardware is probed.
Signed-off-by: NAndy Gospodarek <andy@greyhouse.net>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The E100 device can't work on current kernel (2.6.26-rc6) and will cause
kernel corruption on intel ixdp4xx.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

	PCI_DEVICE_CLASS sets .device and .vendor to PCI_ANY_DEV,
which overrides the effect of preceding PCI_DEVICE() and makes
all elements of netxen_pci_tbl[] identical.  Introduced in the
commit dcd56fdb.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Original Author: Michael Buesch <mb@bu3sch.de>

net, vortex: fix lockup

Ingo Molnar reported:

-tip testing found that Johannes Berg's "softirq: remove irqs_disabled
warning from local_bh_enable" enhancement to lockdep triggers a new
warning on an old testbox that uses 3c59x vortex and netlogging:

----->
    calling  vortex_init+0x0/0xb0
    PCI: Found IRQ 10 for device 0000:00:0b.0
    PCI: Sharing IRQ 10 with 0000:00:0a.0
    PCI: Sharing IRQ 10 with 0000:00:0b.1
    3c59x: Donald Becker and others.
    0000:00:0b.0: 3Com PCI 3c556 Laptop Tornado at e0800400.
    PCI: Enabling bus mastering for device 0000:00:0b.0
    initcall vortex_init+0x0/0xb0 returned 0 after 47 msecs
...
    calling  init_netconsole+0x0/0x1b0
    netconsole: local port 4444
    netconsole: local IP 10.0.1.9
    netconsole: interface eth0
    netconsole: remote port 4444
    netconsole: remote IP 10.0.1.16
    netconsole: remote ethernet address 00:19:xx:xx:xx:xx
    netconsole: device eth0 not up yet, forcing it
    eth0:  setting half-duplex.
    eth0:  setting full-duplex.
------------[ cut here ]------------
    WARNING: at kernel/softirq.c:137 local_bh_enable_ip+0xd1/0xe0()
    Pid: 1, comm: swapper Not tainted 2.6.26-rc6-tip #2091
     [<c0125ecf>] warn_on_slowpath+0x4f/0x70
     [<c0126834>] ? release_console_sem+0x1b4/0x1d0
     [<c0126d00>] ? vprintk+0x2a0/0x450
     [<c012fde5>] ? __mod_timer+0xa5/0xc0
     [<c046f7fd>] ? mdio_sync+0x3d/0x50
     [<c0160ef6>] ? marker_probe_cb+0x46/0xa0
     [<c0126ed7>] ? printk+0x27/0x50
     [<c046f4c3>] ? vortex_set_duplex+0x43/0xc0
     [<c046f521>] ? vortex_set_duplex+0xa1/0xc0
     [<c0471b92>] ? vortex_timer+0xe2/0x3e0
     [<c012b361>] local_bh_enable_ip+0xd1/0xe0
     [<c08d9f9f>] _spin_unlock_bh+0x2f/0x40
     [<c0471b92>] vortex_timer+0xe2/0x3e0
     [<c014743b>] ? trace_hardirqs_on+0xb/0x10
     [<c0147358>] ? trace_hardirqs_on_caller+0x88/0x160
     [<c012f8b2>] run_timer_softirq+0x162/0x1c0
     [<c0471ab0>] ? vortex_timer+0x0/0x3e0
     [<c012b361>] local_bh_enable_ip+0xd1/0xe0
     [<c08d9f9f>] _spin_unlock_bh+0x2f/0x40
     [<c0471b92>] vortex_timer+0xe2/0x3e0
     [<c014743b>] ? trace_hardirqs_on+0xb/0x10
     [<c0147358>] ? trace_hardirqs_on_caller+0x88/0x160
     [<c012f8b2>] run_timer_softirq+0x162/0x1c0
     [<c0471ab0>] ? vortex_timer+0x0/0x3e0
     [<c0471ab0>] ? vortex_timer+0x0/0x3e0
     [<c012b60a>] __do_softirq+0x9a/0x160
     [<c012b570>] ? __do_softirq+0x0/0x160
     [<c0106775>] call_on_stack+0x15/0x30
     [<c012b4f5>] ? irq_exit+0x55/0x60
     [<c0106e85>] ? do_IRQ+0x85/0xd0
     [<c0147391>] ? trace_hardirqs_on_caller+0xc1/0x160
     [<c0104888>] ? common_interrupt+0x28/0x30
     [<c08d8ac8>] ? mutex_unlock+0x8/0x10
     [<c08d8180>] ? _cond_resched+0x10/0x30
     [<c07a3be7>] ? netpoll_setup+0x117/0x390
     [<c0cbfcfe>] ? init_netconsole+0x14e/0x1b0
     [<c013d539>] ? ktime_get+0x19/0x40
     [<c0c9bab2>] ? kernel_init+0x1b2/0x2c0
     [<c0cbfbb0>] ? init_netconsole+0x0/0x1b0
     [<c0396aa4>] ? trace_hardirqs_on_thunk+0xc/0x10
     [<c0103f12>] ? restore_nocheck_notrace+0x0/0xe
     [<c0c9b900>] ? kernel_init+0x0/0x2c0
     [<c0c9b900>] ? kernel_init+0x0/0x2c0
     [<c0104aa7>] ? kernel_thread_helper+0x7/0x10
     =======================
---[ end trace 37f9c502aff112e0 ]---
    console [netcon0] enabled
    netconsole: network logging started
    initcall init_netconsole+0x0/0x1b0 returned 0 after 2914 msecs

looking at the driver I think the bug is real and the fix actually
is trivial.

vp->lock is also taken in hardware IRQ context, so we _have_ to always
use irqsafe locking. As we run in a timer with IRQs disabled,
we can simply use spin_lock.

Cc: <stable@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Fixes a sparse warning in a code block that's hidden under JUMBO_FRAME #ifdef.
Tested-by: NAndrew Savchenko <Bircoph@list.ru>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Make jumbo frame support compile again. It was broken by the cleanup series
before the merge because the code is hidden under JUMBO_FRAME #ifdef.
Tested-by: NAndrew Savchenko <Bircoph@list.ru>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Taking sizeof the result of sizeof is quite strange and does not seem to be
what is wanted here.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
@@

- sizeof (
  sizeof (E)
- )
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NKomuro <komurojun-mbn@nifty.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

EEH is not recovering in a reasonable amount of time on PPC during
e1000e_down().
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

EEH is not recovering in a reasonable amount of time on PPC during
igb_down().
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

EEh is not recovering in a resonable amount of time on PPC during
ixgbe_down().
Signed-off-by: NPaul Larson <pl@us.ibm.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

On Rx FIFO overflow error, the controller consume a buffer descriptor
but currently the driver does not give it back to the controller.
This results unrecoverable 'Buffer List Exhausted' condition.  This
patch fix this problem by moving a "fbl_count--" line to proper place.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Call netif_carrier_off() before starting PHY device.  This is a
behavior before converting to generic PHY layer.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The documentation for intr_type module parameter of the s2io driver is
not consistent with the code. The comments in drivers/net/s2io.c are
OK, but Documentation/networking/s2io.txt is wrong.

Pointed out by Andrew Hecox.
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch modifies the band selection management when scanning, so
bands are now scanned according to HW band support.
Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The usb_cache_mutex was not correctly released
under all circumstances. Both rt73usb as rt2500usb
didn't release the mutex under certain conditions
when the register access failed. Obviously such
failure would lead to deadlocks.

In addition under similar circumstances when the
bbp register couldn't be read the value must be
set to 0xff to indicate that the value is wrong.
This too didn't happen under all circumstances.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes a possible NULL pointer dereference in an error path of the
DMA allocation error checking code. This is also necessary for a future
DMA API change that is on its way into the mainline kernel that adds
an additional dev parameter to dma_mapping_error().
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Cc: stable <stable@kernel.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes a possible MMIO access while the device is still down
from a suspend cycle. MMIO accesses with the device powered down
may cause crashes on certain devices.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Never return TX_BUSY from op_tx. It doesn't make sense to return
TX_BUSY, if we can not transmit the packet.
Drop the packet and return TX_OK.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Never return TX_BUSY from op_tx. It doesn't make sense to return
TX_BUSY, if we can not transmit the packet.
Drop the packet and return TX_OK.
This will fix the resume hang.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Implement missing EU regulatory domain for mac80211. Based on the
information in IEEE 802.11-2007 (specifically pages 1142, 1143 & 1148)
and ETSI 301 893 (V1.4.1).
With thanks to Johannes Berg.
Signed-off-by: NTony Vroon <tony@linx.net>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>