commit 4f69851fbaa26b155330be35ce8ac393e93e7442 upstream.

The "used" variables here come from the user in the ioctl and it can be
negative.  It could result in an out of bounds write.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191004102251.GC823@mwanda
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a64fc11b9a520c55ca34d82e5ca32274f49b6b15 upstream.

If a process is interrupted while accessing the "gpu" debugfs file and
the drm device struct_mutex is contended, release() could return early
and fail to free related resources.

Note that the return value from release() is ignored.

Fixes: 4f776f45 ("drm/msm/gpu: Convert the GPU show function to use the GPU state")
Cc: stable <stable@vger.kernel.org>     # 4.18
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010131333.23635-2-johan@kernel.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit add3efdd78b8a0478ce423bb9d4df6bd95e8b335 upstream.

When number of free space in the journal is very low, the arithmetic in
jbd2_log_space_left() could underflow resulting in very high number of
free blocks and thus triggering assertion failure in transaction commit
code complaining there's not enough space in the journal:

J_ASSERT(journal->j_free > 1);

Properly check for the low number of free blocks.

CC: stable@vger.kernel.org
Reviewed-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-1-jack@suse.czSigned-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e23f568aa63f64cd6b355094224cc9356c0f696b upstream.

When the 32bit ino wraps around, kernfs increments the generation
number to distinguish reused ino instances.  The wrap-around detection
tests whether the allocated ino is lower than what the cursor but the
cursor is pointing to the next ino to allocate so the condition never
triggers.

Fix it by remembering the last ino and comparing against that.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 4a3ef68a ("kernfs: implement i_generation")
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9ebd796e24008f33f06ebea5a5e6aceb68b51794 upstream.

Slcan_open doesn't clean-up device which registration failed from the
slcan_devs device list. On next open this list is iterated and freed
device is accessed. Fix this by calling slc_free_netdev in error path.

Driver/net/can/slcan.c is derived from slip.c. Use-after-free error was
identified in slip_open by syzboz. Same bug is in slcan.c. Here is the
trace from the Syzbot slip report:

__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:634
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
sl_sync drivers/net/slip/slip.c:725 [inline]
slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801
tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469
tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596
tiocsetd drivers/tty/tty_io.c:2334 [inline]
tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: ed50e1600b44 ("slcan: Fix memory leak in error path")
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: David Miller <davem@davemloft.net>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NJouni Hogander <jouni.hogander@unikie.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Acked-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b2b2dd71e0859436d4e05b2f61f86140250ed3f8 upstream.

Do not try to handle keycodes that are too big, otherwise we risk doing
out-of-bounds writes:

BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline]
BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722
...
 kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
 kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
 input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118
 input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145
 input_pass_values drivers/input/input.c:949 [inline]
 input_set_keycode+0x290/0x320 drivers/input/input.c:954
 evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882
 evdev_do_ioctl drivers/input/evdev.c:1150 [inline]

In this case we were dealing with a fuzzed HID device that declared over
12K buttons, and while HID layer should not be reporting to us such big
keycodes, we should also be defensive and reject invalid data ourselves as
well.

Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191122204220.GA129459@dtor-wsSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fa9c2362497fbd64788063288dc4e74daf977ebb upstream.

Even when mounting modern protocol version the server may be
configured without supporting SMB2.1 leases and the client
uses SMB2 oplock to optimize IO performance through local caching.

However there is a problem in oplock break handling that leads
to missing a break notification on the client who has a file
opened. It latter causes big latencies to other clients that
are trying to open the same file.

The problem reproduces when there are multiple shares from the
same server mounted on the client. The processing code tries to
match persistent and volatile file ids from the break notification
with an open file but it skips all share besides the first one.
Fix this by looking up in all shares belonging to the server that
issued the oplock break.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6f582b273ec23332074d970a7fb25bef835df71f upstream.

Currently when the client creates a cifsFileInfo structure for
a newly opened file, it allocates a list of byte-range locks
with a pointer to the new cfile and attaches this list to the
inode's lock list. The latter happens before initializing all
other fields, e.g. cfile->tlink. Thus a partially initialized
cifsFileInfo structure becomes available to other threads that
walk through the inode's lock list. One example of such a thread
may be an oplock break worker thread that tries to push all
cached byte-range locks. This causes NULL-pointer dereference
in smb2_push_mandatory_locks() when accessing cfile->tlink:

[598428.945633] BUG: kernel NULL pointer dereference, address: 0000000000000038
...
[598428.945749] Workqueue: cifsoplockd cifs_oplock_break [cifs]
[598428.945793] RIP: 0010:smb2_push_mandatory_locks+0xd6/0x5a0 [cifs]
...
[598428.945834] Call Trace:
[598428.945870]  ? cifs_revalidate_mapping+0x45/0x90 [cifs]
[598428.945901]  cifs_oplock_break+0x13d/0x450 [cifs]
[598428.945909]  process_one_work+0x1db/0x380
[598428.945914]  worker_thread+0x4d/0x400
[598428.945921]  kthread+0x104/0x140
[598428.945925]  ? process_one_work+0x380/0x380
[598428.945931]  ? kthread_park+0x80/0x80
[598428.945937]  ret_from_fork+0x35/0x40

Fix this by reordering initialization steps of the cifsFileInfo
structure: initialize all the fields first and then add the new
byte-range lock list to the inode's lock list.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: NPavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: NAurelien Aptel <aaptel@suse.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 22d6552f827ef76ade3edf6bbb3f05048a0a7d8b upstream.

With the current implementation, phydev cannot be removed:

$ ip link add dummy type dummy
$ ip link add xfrm1 type xfrm dev dummy if_id 1
$ ip l d dummy
 kernel:[77938.465445] unregister_netdevice: waiting for dummy to become free. Usage count = 1

Manage it like in ip tunnels, ie just keep the ifindex. Not that the side
effect, is that the phydev is now optional.

Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: NJulien Floret <julien.floret@6wind.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c5d1030f23002430c2a336b2b629b9d6f72b3564 upstream.

dev_net(dev) is the netns of the device and xi->net is the link netns,
where the device has been linked.
changelink() must operate in the link netns to avoid a corruption of
the xfrm lists.

Note that xi->net and dev_net(xi->physdev) are always the same.

Before the patch, the xfrmi lists may be corrupted and can later trigger a
kernel panic.

Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces")
Reported-by: NJulien Floret <julien.floret@6wind.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: NJulien Floret <julien.floret@6wind.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e9e7e85d75f3731079ffd77c1a66f037aef04fe7 upstream.

The new parameters must not be stored in the netdev_priv() before
validation, it may corrupt the interface. Note also that if data is NULL,
only a memset() is done.

$ ip link add xfrm1 type xfrm dev lo if_id 1
$ ip link add xfrm2 type xfrm dev lo if_id 2
$ ip link set xfrm1 type xfrm dev lo if_id 2
RTNETLINK answers: File exists
$ ip -d link list dev xfrm1
5: xfrm1@lo: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0 minmtu 68 maxmtu 1500
    xfrm if_id 0x2 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535

=> "if_id 0x2"

Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: NJulien Floret <julien.floret@6wind.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 56c5ee1a5823e9cf5288b84ae6364cb4112f8225 upstream.

The following commands produce a backtrace and return an error but the xfrm
interface is created (in the wrong netns):
$ ip netns add foo
$ ip netns add bar
$ ip -n foo netns set bar 0
$ ip -n foo link add xfrmi0 link-netnsid 0 type xfrm dev lo if_id 23
RTNETLINK answers: Invalid argument
$ ip -n bar link ls xfrmi0
2: xfrmi0@lo: <NOARP,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/none 00:00:00:00:00:00 brd 00:00:00:00:00:00

Here is the backtrace:
[   79.879174] WARNING: CPU: 0 PID: 1178 at net/core/dev.c:8172 rollback_registered_many+0x86/0x3c1
[   79.880260] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace sunrpc fscache button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic ide_cd_mod ide_gd_mod cdrom ata_$
eneric ata_piix libata scsi_mod 8139too piix psmouse i2c_piix4 ide_core 8139cp mii i2c_core floppy
[   79.883698] CPU: 0 PID: 1178 Comm: ip Not tainted 5.2.0-rc6+ #106
[   79.884462] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   79.885447] RIP: 0010:rollback_registered_many+0x86/0x3c1
[   79.886120] Code: 01 e8 d7 7d c6 ff 0f 0b 48 8b 45 00 4c 8b 20 48 8d 58 90 49 83 ec 70 48 8d 7b 70 48 39 ef 74 44 8a 83 d0 04 00 00 84 c0 75 1f <0f> 0b e8 61 cd ff ff 48 b8 00 01 00 00 00 00 ad de 48 89 43 70 66
[   79.888667] RSP: 0018:ffffc900015ab740 EFLAGS: 00010246
[   79.889339] RAX: ffff8882353e5700 RBX: ffff8882353e56a0 RCX: ffff8882353e5710
[   79.890174] RDX: ffffc900015ab7e0 RSI: ffffc900015ab7e0 RDI: ffff8882353e5710
[   79.891029] RBP: ffffc900015ab7e0 R08: ffffc900015ab7e0 R09: ffffc900015ab7e0
[   79.891866] R10: ffffc900015ab7a0 R11: ffffffff82233fec R12: ffffc900015ab770
[   79.892728] R13: ffffffff81eb7ec0 R14: ffff88822ed6cf00 R15: 00000000ffffffea
[   79.893557] FS:  00007ff350f31740(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
[   79.894581] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   79.895317] CR2: 00000000006c8580 CR3: 000000022c272000 CR4: 00000000000006f0
[   79.896137] Call Trace:
[   79.896464]  unregister_netdevice_many+0x12/0x6c
[   79.896998]  __rtnl_newlink+0x6e2/0x73b
[   79.897446]  ? __kmalloc_node_track_caller+0x15e/0x185
[   79.898039]  ? pskb_expand_head+0x5f/0x1fe
[   79.898556]  ? stack_access_ok+0xd/0x2c
[   79.899009]  ? deref_stack_reg+0x12/0x20
[   79.899462]  ? stack_access_ok+0xd/0x2c
[   79.899927]  ? stack_access_ok+0xd/0x2c
[   79.900404]  ? __module_text_address+0x9/0x4f
[   79.900910]  ? is_bpf_text_address+0x5/0xc
[   79.901390]  ? kernel_text_address+0x67/0x7b
[   79.901884]  ? __kernel_text_address+0x1a/0x25
[   79.902397]  ? unwind_get_return_address+0x12/0x23
[   79.903122]  ? __cmpxchg_double_slab.isra.37+0x46/0x77
[   79.903772]  rtnl_newlink+0x43/0x56
[   79.904217]  rtnetlink_rcv_msg+0x200/0x24c

In fact, each time a xfrm interface was created, a netdev was allocated
by __rtnl_newlink()/rtnl_create_link() and then another one by
xfrmi_newlink()/xfrmi_create(). Only the second one was registered, it's
why the previous commands produce a backtrace: dev_change_net_namespace()
was called on a netdev with reg_state set to NETREG_UNINITIALIZED (the
first one).

CC: Lorenzo Colitti <lorenzo@google.com>
CC: Benedict Wong <benedictwong@google.com>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Shannon Nelson <shannon.nelson@oracle.com>
CC: Antony Antony <antony@phenome.org>
CC: Eyal Birger <eyal.birger@gmail.com>
Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces")
Reported-by: NJulien Floret <julien.floret@6wind.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7e8ce0e2b036dbc6617184317983aea4f2c52099 upstream.

The AMD FCH USB XHCI Controller advertises support for generating PME#
while in D0.  When in D0, it does signal PME# for USB 3.0 connect events,
but not for USB 2.0 or USB 1.1 connect events, which means the controller
doesn't wake correctly for those events.

  00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7914] (rev 20) (prog-if 30 [XHCI])
        Subsystem: Dell FCH USB XHCI Controller [1028:087e]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Clear PCI_PM_CAP_PME_D0 in dev->pme_support to indicate the device will not
assert PME# from D0 so we don't rely on it.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203673
Link: https://lore.kernel.org/r/20190902145252.32111-1-kai.heng.feng@canonical.comSigned-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9a62d20027da3164a22244d9f022c0c987261687 upstream.

The job of vmalloc_sync_all() is to help the lazy freeing of vmalloc()
ranges: before such vmap ranges are reused we make sure that they are
unmapped from every task's page tables.

This is really easy on pagetable setups where the kernel page tables
are shared between all tasks - this is the case on 32-bit kernels
with SHARED_KERNEL_PMD = 1.

But on !SHARED_KERNEL_PMD 32-bit kernels this involves iterating
over the pgd_list and clearing all pmd entries in the pgds that
are cleared in the init_mm.pgd, which is the reference pagetable
that the vmalloc() code uses.

In that context the current practice of vmalloc_sync_all() iterating
until FIX_ADDR_TOP is buggy:

        for (address = VMALLOC_START & PMD_MASK;
             address >= TASK_SIZE_MAX && address < FIXADDR_TOP;
             address += PMD_SIZE) {
                struct page *page;

Because iterating up to FIXADDR_TOP will involve a lot of non-vmalloc
address ranges:

	VMALLOC -> PKMAP -> LDT -> CPU_ENTRY_AREA -> FIX_ADDR

This is mostly harmless for the FIX_ADDR and CPU_ENTRY_AREA ranges
that don't clear their pmds, but it's lethal for the LDT range,
which relies on having different mappings in different processes,
and 'synchronizing' them in the vmalloc sense corrupts those
pagetable entries (clearing them).

This got particularly prominent with PTI, which turns SHARED_KERNEL_PMD
off and makes this the dominant mapping mode on 32-bit.

To make LDT working again vmalloc_sync_all() must only iterate over
the volatile parts of the kernel address range that are identical
between all processes.

So the correct check in vmalloc_sync_all() is "address < VMALLOC_END"
to make sure the VMALLOC areas are synchronized and the LDT
mapping is not falsely overwritten.

The CPU_ENTRY_AREA and the FIXMAP area are no longer synced either,
but this is not really a proplem since their PMDs get established
during bootup and never change.

This change fixes the ldt_gdt selftest in my setup.

[ mingo: Fixed up the changelog to explain the logic and modified the
         copying to only happen up until VMALLOC_END. ]
Reported-by: NBorislav Petkov <bp@suse.de>
Tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Fixes: 7757d607: ("x86/pti: Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32")
Link: https://lkml.kernel.org/r/20191126111119.GA110513@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In the implementation of psxpad_spi_probe() the allocated memory for
pdev is leaked if psxpad_spi_init_ff() or input_register_polled_device()
fail. The solution is using device managed allocation, like the one used
for pad. Perform the allocation using
devm_input_allocate_polled_device().

Fixes: 8be193c7 ("Input: add support for PlayStation 1/2 joypads connected via SPI")
Signed-off-by: NNavid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2fe6899e36aa174abefd017887f9cfe0cb60c43a upstream.

A number of issues are fixed relating to sysfs input validation:-

1) bb_ctrl_store() - incorrect compare of bit select field to absolute
value. Reworked per ETMv4 specification.
2) seq_event_store() - incorrect mask value - register has two
event values.
3) cyc_threshold_store() - must mask with max before checking min
otherwise wrapped values can set illegal value below min.
4) res_ctrl_store() - update to mask off all res0 bits.
Reviewed-by: NLeo Yan <leo.yan@linaro.org>
Reviewed-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NMike Leach <mike.leach@linaro.org>
Fixes: a77de263 ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20191104181251.26732-6-mathieu.poirier@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit df5b5e555b356662a5e4a23c6774fdfce8547d54 upstream.

The touchscreen on the Teclast X89 is mounted upside down in relation to
the display orientation (the touchscreen itself is mounted upright, but the
display is mounted upside-down). Add a quirk for this so that we send
coordinates which match the display orientation.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20191202085636.6650-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a284e11c371e446371675668d8c8120a27227339 upstream.

This increment of rmi_smbus in rmi_smb_read/write_block() causes
garbage to be read/written.

The first read of SMB_MAX_COUNT bytes is fine, but after that
it is nonsense. Trial-and-error showed that by dropping the
increment of rmiaddr everything is fine and the F54 function
properly works.

I tried a hack with rmi_smb_write_block() as well (writing to the
same F54 touchpad data area, then reading it back), and that
suggests that there too the rmiaddr increment has to be dropped.
It makes sense that if it has to be dropped for read, then it has
to be dropped for write as well.

It looks like the initial work with F54 was done using i2c, not smbus,
and it seems nobody ever tested F54 with smbus. The other functions
all read/write less than SMB_MAX_COUNT as far as I can tell, so this
issue was never noticed with non-F54 functions.

With this change I can read out the touchpad data correctly on my
Lenovo X1 Carbon 6th Gen laptop.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/8dd22e21-4933-8e9c-a696-d281872c8de7@xs4all.nl
Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 86bcd3a12999447faad60ec59c2d64d18d8e61ac upstream.

F34 is a bit special as it reinitializes the device and related driver
structs during the firmware update. This clears the fn_irq_mask which
will then prevent F34 from receiving further interrupts, leading to
timeouts during the firmware update. Make sure to reinitialize the
IRQ enables at the appropriate times.

The issue is in F34 code, but the commit in the fixes tag exposed the
issue, as before this commit things would work by accident.

Fixes: 363c53875aef (Input: synaptics-rmi4 - avoid processing unknown IRQs)
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191129133514.23224-1-l.stach@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fc1156f373e3927e0dcf06678906c367588bfdd6 upstream.

Some Lenovo X1 Carbon Gen 6 laptops report LEN0091. Add this
to the smbus_pnp_ids list.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191119105118.54285-2-hverkuil-cisco@xs4all.nlSigned-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e190de6941db14813032af87873f5550ad5764fe upstream.

Mic mute led does not work on HP ProBook 645 G4.
We can use CXT_FIXUP_MUTE_LED_GPIO fixup to support it.
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191120082035.18937-1-kai.heng.feng@canonical.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4cc8d6505ab82db3357613d36e6c58a297f57f7c upstream.

syzkaller reported an invalid access in PCM OSS read, and this seems
to be an overflow of the internal buffer allocated for a plugin.
Since the rate plugin adjusts its transfer size dynamically, the
calculation for the chained plugin might be bigger than the given
buffer size in some extreme cases, which lead to such an buffer
overflow as caught by KASAN.

Fix it by limiting the max transfer size properly by checking against
the destination size in each plugin transfer callback.

Reported-by: syzbot+f153bde47a62e0b05f83@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191204144824.17801-1-tiwai@suse.deSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e1e8c1fdce8b00fce08784d9d738c60ebf598ebc upstream.

headphone have noise even the volume is very small.
Let it fill up pcbeep hidden register to default value.
The issue was gone.

Fixes: 4344aec8 ("ALSA: hda/realtek - New codec support for ALC256")
Fixes: 736f20a7 ("ALSA: hda/realtek - Add support for ALC236/ALC3204")
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/9ae47f23a64d4e41a9c81e263cd8a250@realtek.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 695d1ec3994f9de2cefae80ee2087c95d2e5a2f3 upstream.

The headset on this machine is not defined, after applying the quirk
ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well

BugLink: https://bugs.launchpad.net/bugs/1846148
Cc: <stable@vger.kernel.org>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191121025427.8856-1-hui.wang@canonical.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 436e25505f3458cc92c7f3c985e9cbc198a98209 upstream.

Laptops like ASUS UX431FLC and UX431FL can share the same audio quirks.
But UX431FLC needs one more step to enable the internal speaker: Pull
the GPIO from CODEC to initialize the AMP.

Fixes: 60083f9e94b2 ("ALSA: hda/realtek - Enable internal speaker & headset mic of ASUS UX431FL")
Signed-off-by: NJian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191125093405.5702-1-jian-hong@endlessm.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit eb59bd17d2fa6e5e84fba61a5ebdea984222e6d5 upstream.

If a filesystem returns negative inode sizes, future reads on the file were
causing the cpu to spin on truncate_pagecache.

Create a helper to validate the attributes.  This now does two things:

 - check the file mode
 - check if the file size fits in i_size without overflowing
Reported-by: NArijit Banerjee <arijit@rubrik.com>
Fixes: d8a5ba45 ("[PATCH] FUSE - core")
Cc: <stable@vger.kernel.org> # v2.6.14
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c634da718db9b2fac201df2ae1b1b095344ce5eb upstream.

When adding a new hard link, make sure that i_nlink doesn't overflow.

Fixes: ac45d613 ("fuse: fix nlink after unlink")
Cc: <stable@vger.kernel.org> # v3.4
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4929a4e6faa0f13289a67cae98139e727f0d4a97 upstream.

The quota/period ratio is used to ensure a child task group won't get
more bandwidth than the parent task group, and is calculated as:

  normalized_cfs_quota() = [(quota_us << 20) / period_us]

If the quota/period ratio was changed during this scaling due to
precision loss, it will cause inconsistency between parent and child
task groups.

See below example:

A userspace container manager (kubelet) does three operations:

 1) Create a parent cgroup, set quota to 1,000us and period to 10,000us.
 2) Create a few children cgroups.
 3) Set quota to 1,000us and period to 10,000us on a child cgroup.

These operations are expected to succeed. However, if the scaling of
147/128 happens before step 3, quota and period of the parent cgroup
will be changed:

  new_quota: 1148437ns,   1148us
 new_period: 11484375ns, 11484us

And when step 3 comes in, the ratio of the child cgroup will be
104857, which will be larger than the parent cgroup ratio (104821),
and will fail.

Scaling them by a factor of 2 will fix the problem.
Tested-by: NPhil Auld <pauld@redhat.com>
Signed-off-by: NXuewei Zhang <xueweiz@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NPhil Auld <pauld@redhat.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes: 2e8e19226398 ("sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockup")
Link: https://lkml.kernel.org/r/20191004001243.140897-1-xueweiz@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 474fb1150d40780e71f0b569aeac4f375df3af3d ]

Set RSS indirection table and RSS hash key sizes to their real size.
Signed-off-by: NDmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e159b6074c82fe31b79aad672e02fa204dbbc6d8 ]

If link is disabled, media_entity_remote_pad returns NULL, causing a
NULL pointer deference.
Ignore links that are not enabled instead.
Signed-off-by: NHelen Koike <helen.koike@collabora.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5760367298a37c459ef0b1364463d70fd9a1f972 ]

When a micro SD card is inserted in the PDU001 card cage, the card
detection switch is opened and the corresponding GPIO input is driven
by a pull-up. Hence change the active level of the card detection
input from low to high.
Signed-off-by: NFelix Brack <fb@ltec.ch>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5719ac19fc32d892434939c1756c2f9a8322e6ef ]

"arm,cortex-a15-pmu" is not a valid fallback compatible string for an
Cortex-A7 PMU, so drop it.

Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: NRob Herring <robh@kernel.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 29f58ff06795a923407d011d4721eaf3e8d39acc ]

Implement set_bias_level to drive shutdown bit, so device is
put to sleep when unused.
Signed-off-by: NLadislav Michl <ladis@linux-mips.org>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ecda0a09fa9933bcd67e33c952f778f0872392ed ]

The driver tries to figure out which state a SD clock is in when the
clock is registered, instead of setting a known state. This can be
problematic for two reasons.

1. If the clock driver can't figure out the state of the clock,
   registration of the clock fails, and setting of a known state by a
   clock user is not possible.

2. The state of the clock depends on if and how the bootloader
   configured it. The driver only checks that the rate is known, not if
   the clock is stopped or not for example.

Fix this by setting a known state and making sure the clock is stopped.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f770e3bc236ee954a3b4052bdf55739e26ee25db ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/usb/mtu3/mtu3_qmu.c: In function 'qmu_tx_zlp_error_handler':
drivers/usb/mtu3/mtu3_qmu.c:385:22: warning:
 variable 'req' set but not used [-Wunused-but-set-variable]

It seems dbginfo original intention is print 'req' other than 'mreq'
Acked-by: NChunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0fbc9b8b4ea3f688a5da141a64f97aa33ad02ae9 ]

This fixes a compilation warning in sysfs.c

drivers/infiniband/hw/mlx4/sysfs.c:360:2: warning: 'strncpy' output may be
truncated copying 8 bytes from a string of length 31
[-Wstringop-truncation]

By eliminating the temporary stack buffer.
Signed-off-by: NQian Cai <cai@gmx.us>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 18912c4524385dd6532c682cb9d4f6aa39ba8d47 ]

The call to sdma_progress() is called outside the wait lock.

In this case, there is a race condition where sdma_progress() can return
false and the sdma_engine can idle.  If that happens, there will be no
more sdma interrupts to cause the wakeup and the vnic_sdma xmit will hang.

Fix by moving the lock to enclose the sdma_progress() call.

Also, delete the tx_retry. The need for this was removed by:
commit bcad2913 ("IB/hfi1: Serve the most starved iowait entry first")

Fixes: 64551ede ("IB/hfi1: VNIC SDMA support")
Reviewed-by: NGary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c1a797c0818e0122c7ec8422edd971cfec9b15ea ]

When it is requested to change its physical state back to Offline while in
the process to go up, DC8051 will set the ERROR field in the
DC8051_DBG_ERR_INFO_SET_BY_8051 register. This ERROR field will remain
until the next time when DC8051 transitions from Offline to Polling.
Subsequently, when the host requests DC8051 to change its physical state
to Polling again, it may receive a DC8051 interrupt with the stale ERROR
field still in DC8051_DBG_ERR_INFO_SET_BY_8051. If the host link state has
been changed to Polling, this stale ERROR will force the host to
transition to Offline state, resulting in a vicious cycle of Polling
->Offline->Polling->Offline. On the other hand, if the host link state is
still Offline when the stale ERROR is received, the stale ERROR will be
ignored, and the link will come up correctly.  This patch implements the
correct behavior by changing host link state to Polling only after DC8051
changes its physical state to Polling.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NKrzysztof Goreczny <krzysztof.goreczny@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit da93d2913fdf43d5cde3c5a53ac9cc29684d5c7c ]

GRE decap offload is configured when local routes prefix correspond to the
local address of one of the offloaded GRE tunnels. The matching check was
found to be too strict, such that for a flat GRE configuration, in which
the overlay and underlay traffic share the same non-default VRF, decap flow
was not offloaded.

Relax the check for decap flow offloading. A match occurs if the local
address of the tunnel matches the local route address while both share the
same VRF table.

Fixes: 4607f6d2 ("mlxsw: spectrum_router: Support IPv4 underlay decap")
Signed-off-by: NNir Dotan <nird@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b0d7fbf8b174168c580bb310964c3c809e5569a9 ]

The workaround for the wrong hierarchy of the 3DG-{A,B} power
domains on R-Car E3 ES1.0 corrected the parent domains.
However, the 3DG-{A,B} power domains were still initialized and powered
in the wrong order, causing 3DG operation to fail.

Fix this by changing the order in the table at runtime, when running on
an affected SoC.

Fixes: 086b3999 ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>