- 23 5月, 2007 4 次提交
-
-
由 Ben Collins 提交于
Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: NBen Collins <bcollins@ubuntu.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Hello, I need to use MaxStream's PKG-U modules which includes a ftdi sio chipset for usb2serial communication, here are the patches for handling Maxstream's modules. The VID & PID to use with the open-source driver are provided on the CD-ROM bundled with the modules. From: Neil Superna ARMSTRONG <superna@na-prod.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this useless check should be removed. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
the transfer of allocating the descriptor in attach and no longer in open was incomplete resulting in a memory leak coverity spotted. This fix is against the patch set you posted. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 5月, 2007 3 次提交
-
-
由 Robert P. J. Day 提交于
Fix the misspellings of "propogate", "writting" and (oh, the shame :-) "kenrel" in the source tree. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
由 David Sterba 提交于
Fix several typos in help text in Kconfig* files. Signed-off-by: NDavid Sterba <dave@jikos.cz> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
由 Randy Dunlap 提交于
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 4月, 2007 24 次提交
-
-
由 Hans Engelen 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Craig Shelley 提交于
Two new device IDs for CP2101 driver. Signed-off-by: NCraig Shelley <craig@microtron.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Leon Leong 提交于
Add the detection for the BandRich BandLuxe C100/C100S/C120 HSDPA Data Card. With the vendor and product IDs are set properly, the data card can be detected and works fine. Signed-off-by: NLeon Leong <upleong@bandrich.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This should help with any potential NULL pointer usages as reported by a few users. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Richard Knutsson 提交于
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se> Acked-by: NStuart MacDonald <stuartm@connecttech.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
omninet kills all URBs in close. However write() returns as soon as the URB has been submitted. Killing the last URB means a race that can lose that date written in the last call to write(). As a fix this is moved to shutdown(). Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
we report errors to the caller. THis patch adds error handling to the driver. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
- report errors - cleanup in error case - use of endianness macros Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this driver has a memory leak in an error case. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jelle Foks 提交于
This patch adds the USB ID of the ADS Tech USBX-707 USB IR blaster (that comes with the ADS Tech PTV-305 grabber card), which has a ftdi232bm inside hooked up to a pic. With this it should be fairly straightforward to make at least lirc receiving work with this device. I will submit a patch to lirc for that as soon as I have one ready, I'm getting data with minicom with this patch, but need to figure out some more details such as best/correct baudrate. Signed-off-by: NJelle Foks <jelle@foks.8m.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this has the same race as the visor driver. The counter must be incremented under the lock it is checked under. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this fixes a small race in visor_write. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
- proper endianness macros - scheduling in interrupt in error case Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NNaranjo Manuel Francisco <naranjo.manuel@gmail.com>
-
由 Oliver Neukum 提交于
the sierra driver does not directly use usb_kill_urb(). It uses a wrapper. This wrapper means that callbacks which are running are not killed during close, resubmitting and illicitly pushing data into the tty layer. The whole purpose of usb_kill_urb() is subverted. The wrapper must be removed. The same problem as the option driver. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
the option driver does not directly use usb_kill_urb(). It uses a wrapper. This wrapper means that callbacks which are running are not killed during close, resubmitting and illicitly pushing data into the tty layer. The whole purpose of usb_kill_urb() is subverted. The wrapper must be removed. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NMatthias Urlichs <smurf@smurf.noris.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
memory allocated must be freed in the error case. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
there's code unclean w.r.t. endianness in the mos7720 driver. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Richard Knutsson 提交于
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
This fixes: - breaking DMA rules about buffers - usage of _global_ variables to save a single device's attributes - racy access to urb->status - smp monotonity issue with statistics - use of one buffer for many simultaneous URBs - error handling introduced - several instances of following NULL pointers - use after free - unnecessary GFP_ATOMIC - GFP_KERNEL in interrupt - various cleanups - write room granularity issue that bit cdc-acm - race in shutdown Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
io_edgeport is using a global variable without locking. This is _the_ classical race condition. This patch switches to atomic_t. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this driver's help text incorrectly claims to support only single port devices. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this driver has an interesting way of handling ENOMEM: complain and ignore. If you decide to live with allocation failures, you must 1. guard against URBs without corresponding buffers 2. complete allocation failures 3. always test entries for NULL before you follow the pointers This patch does so. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
GFP_KERNEL will do. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Norihiko Tomiyama 提交于
I write a patch adding support "SHARP EMONE(S01SH)" device for ipaq.c. EMONE is a PDA with built-in HSDPA function. From: Norihiko Tomiyama <norihiko.tomiyama@ctc-g.co.jp> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 3月, 2007 3 次提交
-
-
由 David Brownell 提交于
Fix annoying build warning: drivers/usb/serial/ftdi_sio.c:890: warning: enumeration value `FT232RL' not handled in switch Also add logic to detect FT232R chips (version 6.00, usb 2.0 full speed), so that case isn't completely useless. (NOTE: FT232RL and FT232RQ are the same chip in different packages: L is SSOP, Q is QFN.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Fix annoying build warning when CONFIG_USB_SERIAL_GENERIC is undefined. drivers/usb/serial/generic.c:24: warning: `generic_probe' declared `static' but never defined Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jon K Hellan 提交于
Both airprime and option now want to handle vendor ID 0x1410, device ID 0x1100. Airprime calls it 'ExpressCard34 Qualcomm 3G CDMA'. Option calls it 'Novatel Merlin XS620/S640'. Patch attached to remove it from airprime. From: Jon K Hellan <jon.kare.hellan@uninett.no> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 3月, 2007 4 次提交
-
-
由 Greg Kroah-Hartman 提交于
This moves all of the Novatel device ids to the option driver, where they belong. Thanks to Novatel for providing a list of all supported devices. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark Glines 提交于
Add an ID to recognise the Novatel EV620 wireless adapter. http://www.novatelwireless.com/products/expedite/ev620.html It looks like a mini PCI-Express adapter. The mPCIE connector includes USB pins... the card shows up to the system as a USB device, and powers itself from the PCI bus. The card I have isn't activated yet, so I can't get a PPP session up yet, but I have tested basic serial communication successfully in both 2.6.18 and 2.6.20 kernels, once the product ID was added. (the driver changed quite a bit between the two revs.) In both drivers, it responds to AT commands and such. Signed-off-by: NMark Glines <mark@glines.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
these devices have a shared interrupt endpoint. For serialcore to pass an interrupt endpoint to a subdriver, the subdriver must define and _export_ a fitting callback. The mos7720 driver failed to do so. This led invariably to an oops upon open. This patch fixes it. The driver is useless without it. Please try to get this into 2.6.21 and the stable kernels that have this driver. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jim Radford 提交于
This patch reverts d9a7ecac since it breaks drivers that need to access the ->port[] array in shutdown (most of them). Signed-Off: Jim Radford <radford@blackbean.org> Acked-by: NMark Lord <mlord@pobox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 3月, 2007 2 次提交
-
-
由 Gard Spreemann 提交于
Here is a patch adding the PID for the FT232RL to ftdi_sio. The patch generates a warning during compilation because get_ftdi_divisor doesn't explicitly handle the FT232RL with this patch, so I guess you don't want to use it in its current state. It is all I could come up with with the knowledge I have of the drivers at the moment, though, and I hope you can have some use for it at least. It works fine with my DLP-TILT with an FT232RL. From: Gard Spreemann <spreeman@stud.ntnu.no> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andre Spahlinger 提交于
Additional devices Signed-off-by: NAndre Spahlinger <uenz@gmx.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-