- 11 9月, 2007 40 次提交
-
-
由 Jason Gaston 提交于
This patch adds the Intel Tolapai LPC and SMBus Controller DID's. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 gw.kernel@tnode.com 提交于
PCI quirk to unhide SMBus on Compaq Deskpro EP 401963-001 (PCA# 010174) motherboard. Signed-off-by: NGreg White <gw.kernel@tnode.com> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ralf Baechle 提交于
pcibios_get_irq_routing_table is an exported symbol. This results in a modpost warning: WARNING: vmlinux.o(.text+0xdca51): Section mismatch: reference to .init.text:pcibios_fixup_bus (between 'pci_scan_child_bus' and 'pci_scan_bus_parented') Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ralf Baechle 提交于
On MIPS with PCI && !HOTPLUG, I'm currently getting the following modpost warning: MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x1ce128): Section mismatch: reference to .init.text:pci_read_bridge_bases (between 'pcibios_fixup_bus' and 'pcibios_enable_device') On MIPS I have the call chains pci_scan_child_bus -> pcibios_fixup_bus -> pci_read_bridge_bases. pci_scan_child_bus can't be __devinit because it it is an exported symbol, thus pcibios_fixup_bus and pci_read_bridge_bases can't be either. For some reason I don't see this issue on x86; I blame compiler differences. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Randy Dunlap 提交于
Fix warnings when CONFIG_PCIEAER=n: drivers/pci/pcie/portdrv_pci.c:105: warning: statement with no effect drivers/pci/pcie/portdrv_pci.c:226: warning: statement with no effect drivers/scsi/arcmsr/arcmsr_hba.c:352: warning: statement with no effect Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata clear horkage on ata_dev_init() [libata, IDE] add new VIA bridge to VIA PATA drivers pata_it821x: fix lost interrupt with atapi devices Fix broken pata_via cable detection
-
由 Tejun Heo 提交于
dev->horkage should be cleared over device hotunplug/plug. Clear it in ata_dev_init(). Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Joseph Chan 提交于
Signed-off-by: NJoseph Chan <josephchan@via.com.tw> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Dike 提交于
The earlier crash dump fix on x86_64 depended on patches in -mm which are intended for post-2.6.23. Without those, it broke the build when it went into 2.6.23-rc5. This changes the field references in ELF_CORE_COPY_REGS back to those still used in mainline. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Walker 提交于
In the case when an nmi gets stucks the endflag stays equal to zero. This causes the busy looping on other cpus to continue, even though the nmi test is done. On my machine with out the change below the system would hang right after check_nmi_watchdog(). The change below just sets endflag prior to checking if the test was successful or not. Signed-off-by: NDaniel Walker <dwalker@mvista.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
The CLFLUSH for the modified code line in text_poke was supposed to speed up CPU recovery. Unfortunately it seems to cause hangs on some VIA C3s (at least on VIA Esther Model 10 Stepping 9) Remove it. Thanks to Stefan Becker for reporting/testing. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephane Eranian 提交于
Fix the NMI watchdog on Intel CoreDuo processor where the kernel would get stuck during boot. The issue is related to errata AE49, where the PERFEVTSEL1 counter does not have a working enable bit. Thus it is not possible to use it for NMI. The patch creates a dedicated wd_ops for CoreDuo which falls back to using PERFEVTSEL0. The other Intel processors supporting the architectural PMU will keep on using PERFEVTSEL1 as this allows other subsystems, such as perfmon, to use PERFEVTSEL0 for PEBS monitoring in particular. Bug initially reported by Daniel Walker. AK: Added comments Signed-off-by: NStephane Eranian <eranian@hpl.hp.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Neil Brown 提交于
fsid_source decided where to get the 'fsid' number to return for a GETATTR based on the type of filehandle. It can be from the device, from the fsid, or from the UUID. It is possible for the filehandle to be inconsistent with the export information, so make sure the export information actually has the info implied by the value returned by fsid_source. Signed-off-by: NNeil Brown <neilb@suse.de> Cc: "Luiz Fernando N. Capitulino" <lcapitulino@gmail.com> Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Neil Brown 提交于
Recent changes in NFSd cause a directory which is mounted-on to not appear properly when the filesystem containing it is exported. *exp_get* now returns -ENOENT rather than NULL and when commit 5d3dbbea removed the NULL checks, it didn't add a check for -ENOENT. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
When PTRACE_SYSCALL was used and then PTRACE_DETACH is used, the TIF_SYSCALL_TRACE flag is left set on the formerly-traced task. This means that when a new tracer comes along and does PTRACE_ATTACH, it's possible he gets a syscall tracing stop even though he's never used PTRACE_SYSCALL. This happens if the task was in the middle of a system call when the second PTRACE_ATTACH was done. The symptom is an unexpected SIGTRAP when the tracer thinks that only SIGSTOP should have been provoked by his ptrace calls so far. A few machines already fixed this in ptrace_disable (i386, ia64, m68k). But all other machines do not, and still have this bug. On x86_64, this constitutes a regression in IA32 compatibility support. Since all machines now use TIF_SYSCALL_TRACE for this, I put the clearing of TIF_SYSCALL_TRACE in the generic ptrace_detach code rather than adding it to every other machine's ptrace_disable. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Norden 提交于
Fix "lost" interrupt problem when using dma with CD/DVD drives in some configurations. This problem can make installing linux from media impossible for distro's that have switched to libata-only configurations. The simple fix is to eliminate the use of dma for reading drive status, etc, by checking the number of bytes to transferred. This change will only affect the behavior of atapi devices, not disks. There is more info at http://bugzilla.redhat.com/show_bug.cgi?id=242229 This patch is for 2.6.22.1 Signed-off-by: NJeff Norden <jnorden@math.tntech.edu> Reviewed-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Laurent Riffard 提交于
via_do_set_mode overwrites 80-wire cable detection bits. Let's preserve them. Signed-off-by: NLaurent Riffard <laurent.riffard@free.fr> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Ocelot: remove remaining bits [MIPS] TLB: Fix instruction bitmasks [MIPS] R10000: Fix wrong test in dma-default.c [MIPS] Provide empty irq_enable_hazard definition for legacy and R1 cores. [MIPS] Sibyte: Remove broken dependency on EXPERIMENTAL from SIBYTE_SB1xxx_SOC. [MIPS] Kconfig: whitespace cleanup. [MIPS] PCI: Set need_domain_info if controller domain index is non-zero. [MIPS] BCM1480: Fix computation of interrupt mask address register. [MIPS] i8259: Add disable method. [MIPS] tty: add the new ioctls and definitions.
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-algo-bit: Read block data bugfix i2c-pxa: Fix adapter number i2c-gpio: Fix adapter number
-
git://lm-sensors.org/kernel/mhoffman/hwmon-2.6由 Linus Torvalds 提交于
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: End of I/O region off-by-one
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] blkcipher: Fix inverted test in blkcipher_get_spot [CRYPTO] blkcipher: Fix handling of kmalloc page straddling
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: fw-ohci: ignore failure of pci_set_power_state (fix suspend regression)
-
git://www.linux-m32r.org/git/takata/linux-2.6_dev由 Linus Torvalds 提交于
* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev: m32r: Rename STI/CLI macros m32r: build fix of entry.S m32r: Separate syscall table from entry.S m32r: Cosmetic updates of arch/m32r/kernel/entry.S m32r: Exit ei_handler directly for no IRQ case or IPI operations m32r: Simplify ei_handler code m32r: Define symbols to unify platform-dependent ICU checks m32r: Move dot.gdbinit files m32r: Rearrange platform-dependent codes m32r: Add defconfig file for the usrv platform. m32r: Update defconfig files for 2.6.23-rc1 m32r: Move defconfig files to arch/m32r/configs/
-
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: fix ideal_runtime calculations for reniced tasks sched: improve prev_sum_exec_runtime setting sched: simplify __check_preempt_curr_fair() sched: fix xtensa build warning sched: debug: fix sum_exec_runtime clearing sched: debug: fix cfs_rq->wait_runtime accounting sched: fix niced_granularity() shift sched: fix MC/HT scheduler optimization, without breaking the FUZZ logic.
-
git://oss.sgi.com:8090/xfs/xfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] fix nasty quota hashtable allocation bug [XFS] fix sparse shadowed variable warnings [XFS] fix ASSERT and ASSERT_ALWAYS [XFS] Fix sparse warning in kmem_shake_allow [XFS] Fix sparse NULL vs 0 warnings [XFS] Set filestreams object timeout to something sane.
-
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: [x86 setup] Work around bug in Xen HVM
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thiemo Seufer 提交于
Signed-Off-By: NThiemo Seufer <ths@networkno.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maxime Bizon 提交于
Signed-off-by: NMaxime Bizon <mbizon@freebox.fr> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Following a strict interpretation the empty definition of irq_enable_hazard has always been a bug - but an intentional one because it didn't bite. This has now changed, for uniprocessor kernels mm/slab.c:do_drain() [...] on_each_cpu(do_drain, cachep, 1, 1); check_irq_on(); [...] may be compiled into a mtc0 c0_status; mfc0 c0_status sequence resulting in a back-to-back hazard. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Otherwise Kconfig will produce a nonsenical .config for a kernel that is neither 32-bit nor 64-bit. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This fixes this little funny: bigsur:/proc/bus/pci# ls -l total 0 dr-xr-xr-x 2 root root 0 Aug 28 19:31 00 dr-xr-xr-x 2 root root 0 Aug 28 19:31 00 dr-xr-xr-x 2 root root 0 Aug 28 19:31 01 dr-xr-xr-x 2 root root 0 Aug 28 19:31 03 -r--r--r-- 1 root root 0 Aug 28 19:31 devices Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
CC arch/mips/sibyte/bcm1480/irq.o arch/mips/sibyte/bcm1480/irq.c: In function 'bcm1480_mask_irq': arch/mips/sibyte/bcm1480/irq.c:112: warning: cast to pointer from integer of different size arch/mips/sibyte/bcm1480/irq.c:114: warning: cast to pointer from integer of different size arch/mips/sibyte/bcm1480/irq.c: In function 'bcm1480_unmask_irq': arch/mips/sibyte/bcm1480/irq.c:130: warning: cast to pointer from integer of different size arch/mips/sibyte/bcm1480/irq.c:132: warning: cast to pointer from integer of different size Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Kyungmin Park 提交于
After 76d21601, the qemu NE2000 was frequently producing WATCHDOG timeouts. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Alan Cox 提交于
Same as all the others, just put in the constants for the existing kernel code and termios2 structure Signed-off-by: NAlan Cox <alan@redhat.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Joachim Fenkes 提交于
Previously, ibmebus derived a device's bus_id from its location code. The location code is not guaranteed to be unique, so we might get bus_id collisions if two devices share the same location code. The OFDT full_name, however, is unique, so we use that instead (truncating it on the left if it is too long). Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
On PS3, A storage device may show up in the repository before the hypervisor has finished probing: - If its type is not yet known, it shows up as PS3_DEV_TYPE_STOR_DUMMY, - If its regions are being probed, it shows up as having zero regions. If any of these happen, consider the device not yet present. The storage probe thread will retry later. This fixes the timing-dependent problem where a kernel booted from FLASH ROM sometimes cannot find the hard disk. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jeremy Kerr 提交于
At present, running any SPE program on the ps3 will trigger a BUG_ON when spufs_run_spu tries to clear the master run control bit, as lv1 does not make the master run control available to Linux. This change makes SPE apps work again by disabling changes to the master run control on PS3. Although we don't have the facility to disable a SPE with supervisor-level privileges, it's better than hitting the BUG_ON unconditionally. Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Acked-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-