Signed-off-by: NMark F. Brown <mark.brown314@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch initializes the pages per block field in CONFIG1 for
v2 controllers. It also sets the FP_INT field. This is the last
field not correctly initialized, so we can switch from
read/modify/write the CONFIG1 reg to just write the correct
value.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NJohn Ogness <john.ogness@linutronix.de>
Tested-by: NJohn Ogness <john.ogness@linutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

When DMA error occurs. it's loop hang since it can't exit the loop.
and it's the right DMA handling code as Spec.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Wrong assumption bufferram can be switched between BufferRAM0 and BufferRAM1
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Since info->mtd isn't dynamically allocated, we shouldn't attempt to
kfree() it.  Otherwise we get random fun corruption when unloading
the driver built as a module.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Seems some patches got out sync when being merged.  The Blackfin NFC
driver was updated to use nand_scan_ident(), but it missed the change
where nand_scan_ident() now takes 3 arguments.  So update this driver
to fix build failures.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch avoids byte access to the NFC buffer. Byte access to the
NFC is not allowed.

The patch is against linux-next 20100618.
Signed-off-by: NJohn Ogness <john.ogness@linutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Tested-by: NJohn Ogness <john.ogness@linutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Apparently, the check for a 6-byte ID string introduced by commit
426c457a ("mtd: nand: extend NAND flash
detection to new MLC chips") is NOT sufficient to determine whether or
not a Samsung chip uses their new MLC detection scheme or the old,
standard scheme. This adds a condition to check cell type.
Signed-off-by: NTilman Sauerbeck <tilman@code-monkey.de>
Signed-off-by: NBrian Norris <norris@broadcom.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org

Commit c7b28e25 ("mtd: nand: refactor BB 
marker detection") caused a regression in detection of factory-set bad 
block markers, especially for certain small-page NAND. This fix removes 
some unneeded constraints on using NAND_SMALL_BADBLOCK_POS, making the 
detection code more correct.

This regression can be seen, for example, in Hynix HY27US081G1M and
similar.
Signed-off-by: NBrian Norris <norris@broadcom.com>
Tested-by: NMichael Guntsche <mike@it-loops.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Test on a PXA310 platform with Samsung K9F2G08X0B NAND flash,
with tCH=5 and clk is 156MHz, ns2cycle(5, 156000000) returns -1.

ns2cycle returns negtive value will break NDTR0_tXX macros.

After checking the commit log, I found the problem is introduced by
commit 5b0d4d7c
"[MTD] [NAND] pxa3xx: convert from ns to clock ticks more accurately"

To get num of clock cycles, we use below equation:
num of clock cycles = time (ns) / one clock cycle (ns) + 1
We need to add 1 cycle here because integer division will truncate the result.
It is possible the developers set the Min values in SPEC for timing settings.
Thus the truncate may cause problem, and it is safe to add an extra cycle here.

The various fields in NDTR{01} are in units of clock ticks minus one,
thus we should subtract 1 cycle then.

Thus the correct equation should be:
num of clock cycles = time (ns) / one clock cycle (ns) + 1 - 1
                    = time (ns) / one clock cycle (ns)
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NLei Wen <leiwen@marvell.com>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org

The drivers for Xilinx' SystemACE and physically mapped MTDs were missing
prototypes for of_address_to_resource(). This patch adds the necessary
headers.
Signed-off-by: NGraeme Smecher <graeme.smecher@mail.mcgill.ca>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

The buswidth for chips of ID 0xD7 is x8, not x16.
This was my previous typo.
Signed-off-by: NBrian Norris <norris@broadcom.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

"plat_id" is always non-NULL here.  There is a zero element on the end
of the m25p_ids[] array and if we hit the end of the loop then plat_id
points to that.

This would lead to a NULL pointer dereference later on in the function.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This is just a cleanup, it doesn't fix any bugs.

These functions all check retlen inconsistently and it generates a
warning in Smatch (http://smatch.sf.net).  If retlen were ever NULL it
would cause an oops and the code has been this way since 2006 so someone
would have complained.  Also I looked at other places that implemented
the mtd read and write functions and they dereference retlen without
checking.

I removed the checks.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

All hardware initialization will be done in denali_hw_init before
irq handler registered
Change mtd name from "DENALI NAND" to be "denali-nand" since whitespace in
name can cause problems if we use cmdlinepart
Signed-off-by: NChuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NChuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NChuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

In mtd->write, Denali controller will use MODE_11 mode to read
NAND flash status, then return back to MODE_1O mode to do page
write.
Here comes a bug for this kind of using, sometimes controller will
not write data to NAND and just return a good interrupt to tell
driver writing work is done. The data in this page is all 0xff and
this page can not be written again. The reason is unknow.

So read Denali controller register WRITE_PROTECT to get NAND status
instead.
Signed-off-by: NChuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

waring: no space for starting a line
Signed-off-by: NChuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Fix mtd/nand_base.c kernel-doc warnings and typos.

Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'mtd'
Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'ofs'
Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'len'
Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'invert'
Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'mtd'
Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'ofs'
Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'len'
Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'mtd'
Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'ofs'
Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'len'
Warning(drivers/mtd/nand/nand_base.c:2087): No description found for parameter 'len'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix mtd/nand_base.c kernel-doc warnings and typos.

Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'mtd'
Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'ofs'
Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'len'
Warning(drivers/mtd/nand/nand_base.c:893): No description found for parameter 'invert'
Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'mtd'
Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'ofs'
Warning(drivers/mtd/nand/nand_base.c:930): No description found for parameter 'len'
Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'mtd'
Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'ofs'
Warning(drivers/mtd/nand/nand_base.c:987): No description found for parameter 'len'
Warning(drivers/mtd/nand/nand_base.c:2087): No description found for parameter 'len'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NChuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Once the last ECC error was handled, controller will triger an
interrupt. If this interrupt can not be clean on time, controller
may corrupt.
Signed-off-by: NChuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

denali_write32() just implements a debug function for iowrite32(),
only print out the write value. Remove this function since it's useless
Signed-off-by: NChuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Fixed a pci_resource_len function error;
Changed returning sequence of probe function;
Signed-off-by: NChuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

There are three reasons to add this support:
1. users probably know the interface type of their flashs, then probe
can be faster if they give the right type in platform data since wrong
types will not be detected.
2. sometimes, detecting can cause destory to system. For example, for
kernel XIP, detecting can cause NOR enter a mode instructions can not
be fetched right, which will make kernel crash.
3. For a new probe which is not listed in the rom_probe_types, if users
assign it in board files, physmap can still probe it.
Signed-off-by: NBarry Song <21cnbao@gmail.com>
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The open and release block_device_operations are currently
called with the BKL held. In order to change that, we must
first make sure that all drivers that currently rely
on this have no regressions.

This blindly pushes the BKL into all .open and .release
operations for all block drivers to prepare for the
next step. The drivers can subsequently replace the BKL
with their own locks or remove it completely when it can
be shown that it is not needed.

The functions blkdev_get and blkdev_put are the only
remaining users of the big kernel lock in the block
layer, besides a few uses in the ioctl code, none
of which need to serialize with blkdev_{get,put}.

Most of these two functions is also under the protection
of bdev->bd_mutex, including the actual calls to
->open and ->release, and the common code does not
access any global data structures that need the BKL.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

As a preparation for the removal of the big kernel
lock in the block layer, this removes the BKL
from the common ioctl handling code, moving it
into every single driver still using it.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests.  This allows much easier grepping for different request
types instead of unwinding through macros.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Removing the redwood mtd mapping driver, because all REDWOOD_[456]
configuration options were removed from the kernel, because they weren't
referenced anywhere.
Signed-off-by: NChristian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Nand devices with at least 26 bytes of oob data per 512 byte block
can have 8bit ecc on v2 type controllers. This is currently not tested,
but at least this patch puts the ECC_MODE bit into a well defined state.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The v2 controller has a totally different mechanism to check
whether the data we read had ecc errors or not. Implement this.
The mechanism in the v2 controller happens to be identical to
the v3 controller.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This prepares the driver for v3 support. The v3 controller
has a completely different register layout, so add a V1_V2_
namespace to the register defines to avoid confusion with
the v3 regs.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch prepares the driver to add v3 controller support
later. The v3 controller is basically the same controller as v1
and v2, but with a completely different register layout.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

We save/restore the value in the buffer anyway, so it makes
no difference whether we use main_area0 or main_area1. So,
we can use main_area0 and remove main_area1 from the driver
which is otherwise unused. Also, clean up the comments in
get_dev_status.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>