The current code was sending one videobuf per field (despite having specified
V4L2_FIELD_SEQ_TB during setup).  As a result, application which used the
read() interface would work, except they would sometimes have the fields
reversed (depending on the luck of which field the device was on when the
application started VBI capture).  The net effect was that CC decoding would
only work about 50% of the time.

Restructure the VBI code a bit so that works like all the other drivers, such
that both fields are delivered in a single videobuf buffer, which ensures that
they are always received in a predictable order.
Signed-off-by: NDevin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The VBI sampling rate and offset were incorrectly specified, which resulted in
CC data not being rendered under zvbi or tvtime.

Set the fields correctly.
Signed-off-by: NDevin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Change a %x to a %p since the variable is a pointer
Signed-off-by: NDevin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Get rid of warning about unused variable
Signed-off-by: NDevin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Run Lindent and fix a few spacing issues.

This patch makes no functional change to the driver.
Signed-off-by: NDevin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Configure the tda18271 to use a smaller transaction size by default, which
works around some sort of i2c bug in the Polaris driver (which needs to be
debugged).

This should be safe for other boards (being in tuner-core means it will be
enabled by default), although testing needs to be done.
Signed-off-by: NDevin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix case where analog calls come in while the DVB side of the board is still
initializing.  This patch is actually just an exact port of the same patch
made by Mauro to em28xx in hg rev 14762.
Signed-off-by: NDevin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add a USB ID for model 111301.
Signed-off-by: NDevin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for various Hauppauge EXETER designs.

Note by DJH: fixed a few minor 'make checkpatch' warnings before commit.
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NDevin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Added support for new cx231xx boards - Carraera, Shelby, RDx_253S and
VIDEO_GRABBER.

[mchehab@redhat.com: Fix a merge conflict with BKL removal patches]
Signed-off-by: NPalash Bandyopadhyay <palash.bandyopadhyay@conexant.com>
Signed-off-by: NDevin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Introduce a new driver for the s5h1432
Signed-off-by: NPalash Bandyopadhyay <palash.bandyopadhyay@conexant.com>
Signed-off-by: NDevin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Errors found by the checkpatch.pl tool.

[mchehab@redhat.com: merged a series of CodingStyle cleanup patches for cx25851. They're all from the same author, and patches the same driver]
Signed-off-by: NRuslan Pisarev <ruslan@rpisarev.org.ua>
Cc: Palash Bandyopadhyay <Palash.Bandyopadhyay@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

fix "ERROR: space prohibited after that open parenthesis '('"

This is a patch to the cx25821-audio-upstream.h file that fixed up a
space errors found by the checkpatch.pl tools.
Signed-off-by: NRuslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This allows GStreamer to pick appropriate framerates and resolutions
based on desired capture parameters.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

GStreamer uses this.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Inquiring minds (and gstreamer) want to know.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch, which basically reverts 6d77444a, fixes an occasional
on-boot or on-capture hang on the XO-1 laptop.

It seems like the cafe hardware is flakier than we thought and that in
some cases, the commands get executed but are never reported as completed
(even if we substantially increase the delays before reading registers).

Reintroduce the 1-second CAFE_SMBUS_TIMEOUT to catch and avoid this
strange hardware bug.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The go7007 driver has a potential buffer overflow and pointer corruption
bug which causes a crash while capturing MJPEG. The motion detection
(MODET) active_map array can be overflowed by JPEG frame data that
emulates a MODET start code. The active_map overflow overwrites the
active_buf pointer, causing a crash.

The JPEG data that emulated MODET start code was being removed from the
output, resulting in garbled JPEG frames. Therefore ignore MODET start
codes when MODET is not enabled.
Signed-off-by: NPete Eberlein <pete@sensoray.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

I added a code to the driver to force it to produce a warning. This
were intended to remind me about a very bad hack. I never found a way
to workaround. So, instead of those warnings:

drivers/staging/tm6000/tm6000-core.c: In function ‘tm6000_init_analog_mode’:
drivers/staging/tm6000/tm6000-core.c:328: warning: ISO C90 forbids mixed declarations and code

Let's document the issue and hope if someone with the support of the vendor
might fix it.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/staging/lirc/lirc_igorplugusb.c: In function ‘usb_remote_probe’:
drivers/staging/lirc/lirc_igorplugusb.c:393: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘unsigned int’
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As pointed by Laurent:

I think min_t(size_t, PAGE_SIZE, size) is the preferred way.

Thanks-to: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

struct file_operations was made const in the drivers, but not in struct
lirc_driver:

drivers/staging/lirc/lirc_it87.c:365: warning: initialization discards qualifiers from pointer target type
drivers/staging/lirc/lirc_parallel.c:571: warning: initialization discards qualifiers from pointer target type
drivers/staging/lirc/lirc_serial.c:1073: warning: initialization discards qualifiers from pointer target type
drivers/staging/lirc/lirc_sir.c:482: warning: initialization discards qualifiers from pointer target type
drivers/staging/lirc/lirc_zilog.c:1284: warning: assignment discards qualifiers from pointer target type
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/staging/tm6000/tm6000-stds.c:101: warning: excess elements in array initializer
drivers/staging/tm6000/tm6000-stds.c:101: warning: (near initialization for ‘tv_stds[0].common’)
drivers/staging/tm6000/tm6000-stds.c:160: warning: excess elements in array initializer
drivers/staging/tm6000/tm6000-stds.c:160: warning: (near initialization for ‘tv_stds[1].common’)
drivers/staging/tm6000/tm6000-stds.c:219: warning: excess elements in array initializer
drivers/staging/tm6000/tm6000-stds.c:219: warning: (near initialization for ‘tv_stds[2].common’)
drivers/staging/tm6000/tm6000-stds.c:336: warning: excess elements in array initializer
drivers/staging/tm6000/tm6000-stds.c:336: warning: (near initialization for ‘tv_stds[4].common’)
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There are some symbols at saa7134-input that are used on saa7134
and vice-versa. Due to that, module install fails.

So, partially revert commit 9f495cf7d691c99bf7bdcec9f35fcfdad2cf9ae9.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/videobuf-dma-sg.c: In function ‘videobuf_pages_to_sg’:
drivers/media/video/videobuf-dma-sg.c:119: warning: comparison of distinct pointer types lacks a cast
drivers/media/video/videobuf-dma-sg.c:120: warning: comparison of distinct pointer types lacks a cast
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The driver sn9c102 does not know about the sensor mi0360b.
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The 'end of image' block may be splitted between two ISOC packets.
This case was not tested, so, some images could be lost and concatenated
to previous one(s), raising 'frame overflow' errors.
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Call to i2c_put_adapter was missing in radio_si4713_pdriver_probe and
radio_si4713_pdriver_remove.
Signed-off-by: NJarkko Nikula <jhnikula@gmail.com>
Acked-by: NEduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

I rework my last patch for audio and now audio works well. This patch
can be submited to GIT tree Quality of audio now is good for SECAM-DK.
For other standard I set some value from datasheet need some tests.

1. Fix pcm buffer overflow
2. Rework pcm buffer fill method
3. Swap bytes in audio stream
4. Change some registers value for TM6010
5. Change pcm buffer size
Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We've been doing this for a while in Fedora without any complaints.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of doing:

[   82.581639] tda18271 4-0060: creating new instance
[   82.588411] Unknown device detected @ 4-0060, device not supported.
[   82.594695] tda18271_attach: [4-0060|M] error -22 on line 1272
[   82.600530] tda18271 4-0060: destroying instance

Print:
[  468.740392] Unknown device (0) detected @ 4-0060, device not supported.

for the error message, to help detecting what's going wrong with the
device.

This helps to detect when the driver is using the wrong I2C bus (or have
the i2g gate switch pointing to the wrong place), on devices like cx231xx
that just return 0 on reads to a non-existent i2c device.
Reviewed-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This function is an internal API and belongs in v4l2-common.h, not
videodev.h. The return pointer and probe argument should be const as well.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Missed a few init functions on non-Intel platforms the first time :-(
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

With a null request byte, these commands prevented the next commands
to be executed.
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>