- 09 2月, 2018 1 次提交
-
-
由 Peter Zijlstra 提交于
Linus reported that GCC-7.3 generated a switch-table construct that confused objtool. It turns out that, in particular due to KASAN, it is possible to have unrelated .rodata usage in between the .rodata setup for the switch-table and the following indirect jump. The simple linear reverse search from the indirect jump would hit upon the KASAN .rodata usage first and fail to find a switch_table, resulting in a spurious 'sibling call with modified stack frame' warning. Fix this by creating a 'jump-stack' which we can 'unwind' during reversal, thereby skipping over much of the in-between code. This is not fool proof by any means, but is sufficient to make the known cases work. Future work would be to construct more comprehensive flow analysis code. Reported-and-tested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180208130232.GF25235@hirez.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 30 1月, 2018 3 次提交
-
-
由 Josh Poimboeuf 提交于
With the following fix: 2a0098d7 ("objtool: Fix seg fault with gold linker") ... a seg fault was avoided, but the original seg fault condition in objtool wasn't fixed. Replace the seg fault with an error message. Suggested-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/dc4585a70d6b975c99fc51d1957ccdde7bd52f3a.1517284349.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Josh Poimboeuf 提交于
Now that the previous patch gave objtool the ability to read retpoline alternatives, it shows a new warning: arch/x86/entry/entry_64.o: warning: objtool: .entry_trampoline: don't know how to handle alternatives at end of section This is due to the JMP_NOSPEC in entry_SYSCALL_64_trampoline(). Previously, objtool ignored this situation because it wasn't needed, and it would have required a bit of extra code. Now that this case exists, add proper support for it. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/2a30a3c2158af47d891a76e69bb1ef347e0443fd.1517284349.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Josh Poimboeuf 提交于
Currently objtool requires all retpolines to be: a) patched in with alternatives; and b) annotated with ANNOTATE_NOSPEC_ALTERNATIVE. If you forget to do both of the above, objtool segfaults trying to dereference a NULL 'insn->call_dest' pointer. Avoid that situation and print a more helpful error message: quirks.o: warning: objtool: efi_delete_dummy_variable()+0x99: unsupported intra-function call quirks.o: warning: objtool: If this is a retpoline, please patch it in with alternatives and annotate it with ANNOTATE_NOSPEC_ALTERNATIVE. Future improvements can be made to make objtool smarter with respect to retpolines, but this is a good incremental improvement for now. Reported-and-tested-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/819e50b6d9c2e1a22e34c1a636c0b2057cc8c6e5.1517284349.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 18 1月, 2018 1 次提交
-
-
由 Daniel Borkmann 提交于
syzkaller generated a BPF proglet and triggered a warning with the following: 0: (b7) r0 = 0 1: (d5) if r0 s<= 0x0 goto pc+0 R0=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0 2: (1f) r0 -= r1 R0=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0 verifier internal error: known but bad sbounds What happens is that in the first insn, r0's min/max value are both 0 due to the immediate assignment, later in the jsle test the bounds are updated for the min value in the false path, meaning, they yield smin_val = 1, smax_val = 0, and when ctx pointer is subtracted from r0, verifier bails out with the internal error and throwing a WARN since smin_val != smax_val for the known constant. For min_val > max_val scenario it means that reg_set_min_max() and reg_set_min_max_inv() (which both refine existing bounds) demonstrated that such branch cannot be taken at runtime. In above scenario for the case where it will be taken, the existing [0, 0] bounds are kept intact. Meaning, the rejection is not due to a verifier internal error, and therefore the WARN() is not necessary either. We could just reject such cases in adjust_{ptr,scalar}_min_max_vals() when either known scalars have smin_val != smax_val or umin_val != umax_val or any scalar reg with bounds smin_val > smax_val or umin_val > umax_val. However, there may be a small risk of breakage of buggy programs, so handle this more gracefully and in adjust_{ptr,scalar}_min_max_vals() just taint the dst reg as unknown scalar when we see ops with such kind of src reg. Reported-by: syzbot+6d362cadd45dc0a12ba4@syzkaller.appspotmail.com Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
- 17 1月, 2018 1 次提交
-
-
由 Daniel Borkmann 提交于
Alexei found that verifier does not reject stores into context via BPF_ST instead of BPF_STX. And while looking at it, we also should not allow XADD variant of BPF_STX. The context rewriter is only assuming either BPF_LDX_MEM- or BPF_STX_MEM-type operations, thus reject anything other than that so that assumptions in the rewriter properly hold. Add test cases as well for BPF selftests. Fixes: d691f9e8 ("bpf: allow programs to write to certain skb fields") Reported-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
- 16 1月, 2018 1 次提交
-
-
由 Josh Poimboeuf 提交于
If a nonexistent file is supplied to objtool, it complains with a non-helpful error: open: No such file or directory Improve it to: objtool: Can't open 'foo': No such file or directory Reported-by: NMarkus <M4rkusXXL@web.de> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/406a3d00a21225eee2819844048e17f68523ccf6.1516025651.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 14 1月, 2018 1 次提交
-
-
由 Andrew Morton 提交于
patch(1) loses the x bit. So if a user follows our patching instructions in Documentation/admin-guide/README.rst, their kernel will not compile. Fixes: 3bd51c5a ("objtool: Move kernel headers/code sync check to a script") Reported-by: NNicolas Bock <nicolasbock@gentoo.org> Reported-by Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 1月, 2018 1 次提交
-
-
由 Andy Lutomirski 提交于
This tests that the vsyscall entries do what they're expected to do. It also confirms that attempts to read the vsyscall page behave as expected. If changes are made to the vsyscall code or its memory map handling, running this test in all three of vsyscall=none, vsyscall=emulate, and vsyscall=native are helpful. (Because it's easy, this also compares the vsyscall results to their vDSO equivalents.) Note to KAISER backporters: please test this under all three vsyscall modes. Also, in the emulate and native modes, make sure that test_vsyscall_64 agrees with the command line or config option as to which mode you're in. It's quite easy to mess up the kernel such that native mode accidentally emulates or vice versa. Greg, etc: please backport this to all your Meltdown-patched kernels. It'll help make sure the patches didn't regress vsyscalls. CSigned-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/2b9c5a174c1d60fd7774461d518aa75598b1d8fd.1515719552.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 12 1月, 2018 2 次提交
-
-
由 Josh Poimboeuf 提交于
Getting objtool to understand retpolines is going to be a bit of a challenge. For now, take advantage of the fact that retpolines are patched in with alternatives. Just read the original (sane) non-alternative instruction, and ignore the patched-in retpoline. This allows objtool to understand the control flow *around* the retpoline, even if it can't yet follow what's inside. This means the ORC unwinder will fail to unwind from inside a retpoline, but will work fine otherwise. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-3-git-send-email-dwmw@amazon.co.uk
-
由 Josh Poimboeuf 提交于
A direct jump to a retpoline thunk is really an indirect jump in disguise. Change the objtool instruction type accordingly. Objtool needs to know where indirect branches are so it can detect switch statement jump tables. This fixes a bunch of warnings with CONFIG_RETPOLINE like: arch/x86/events/intel/uncore_nhmex.o: warning: objtool: nhmex_rbox_msr_enable_event()+0x44: sibling call from callable instruction with modified stack frame kernel/signal.o: warning: objtool: copy_siginfo_to_user()+0x91: sibling call from callable instruction with modified stack frame ... Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: thomas.lendacky@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/1515707194-20531-2-git-send-email-dwmw@amazon.co.uk
-
- 11 1月, 2018 1 次提交
-
-
由 Daniel Borkmann 提交于
The following snippet was throwing an 'unknown opcode cc' warning in BPF interpreter: 0: (18) r0 = 0x0 2: (7b) *(u64 *)(r10 -16) = r0 3: (cc) (u32) r0 s>>= (u32) r0 4: (95) exit Although a number of JITs do support BPF_ALU | BPF_ARSH | BPF_{K,X} generation, not all of them do and interpreter does neither. We can leave existing ones and implement it later in bpf-next for the remaining ones, but reject this properly in verifier for the time being. Fixes: 17a52670 ("bpf: verifier (add verifier core)") Reported-by: syzbot+93c4904c5c70348a6890@syzkaller.appspotmail.com Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
- 07 1月, 2018 1 次提交
-
-
由 Alexei Starovoitov 提交于
since commit 82abbf8d the verifier rejects the bit-wise arithmetic on pointers earlier. The test 'dubious pointer arithmetic' now has less output to match on. Adjust it. Fixes: 82abbf8d ("bpf: do not allow root to mangle valid pointers") Reported-by: Nkernel test robot <xiaolong.ye@intel.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 31 12月, 2017 2 次提交
-
-
由 Simon Ser 提交于
Fix a seg fault which happens when an input file provided to 'objtool orc generate' doesn't have a '.shstrtab' section (for instance, object files produced by clang don't have this section). Signed-off-by: NSimon Ser <contact@emersion.fr> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/c0f2231683e9bed40fac1f13ce2c33b8389854bc.1514666459.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Simon Ser 提交于
Fix a seg fault when no parameter is provided to 'objtool orc'. Signed-off-by: NSimon Ser <contact@emersion.fr> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/9172803ec7ebb72535bcd0b7f966ae96d515968e.1514666459.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 28 12月, 2017 1 次提交
-
-
由 Lukas Bulwahn 提交于
Fix the following Clang enum conversion warning: arch/x86/decode.c:141:20: error: implicit conversion from enumeration type 'enum op_src_type' to different enumeration type 'enum op_dest_type' [-Werror,-Wenum-conversion] op->dest.type = OP_SRC_REG; ~ ^~~~~~~~~~ It just happened to work before because OP_SRC_REG and OP_DEST_REG have the same value. Signed-off-by: NLukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: NNicholas Mc Guire <der.herr@hofr.at> Reviewed-by: NNick Desaulniers <nick.desaulniers@gmail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: baa41469 ("objtool: Implement stack validation 2.0") Link: http://lkml.kernel.org/r/b4156c5738bae781c392e7a3691aed4514ebbdf2.1514323568.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 24 12月, 2017 1 次提交
-
-
由 Thomas Gleixner 提交于
Now that the LDT mapping is in a known area when PAGE_TABLE_ISOLATION is enabled its a primary target for attacks, if a user space interface fails to validate a write address correctly. That can never happen, right? The SDM states: If the segment descriptors in the GDT or an LDT are placed in ROM, the processor can enter an indefinite loop if software or the processor attempts to update (write to) the ROM-based segment descriptors. To prevent this problem, set the accessed bits for all segment descriptors placed in a ROM. Also, remove operating-system or executive code that attempts to modify segment descriptors located in ROM. So its a valid approach to set the ACCESS bit when setting up the LDT entry and to map the table RO. Fixup the selftest so it can handle that new mode. Remove the manual ACCESS bit setter in set_tls_desc() as this is now pointless. Folded the patch from Peter Ziljstra. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 23 12月, 2017 3 次提交
-
-
由 Jakub Kicinski 提交于
On program/map show we may get an ID of an object from GETNEXT, but the object may disappear before we call GET_FD_BY_ID. If that happens, ignore the object and continue. Fixes: 71bb428f ("tools: bpf: add bpftool") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NQuentin Monnet <quentin.monnet@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Jakub Kicinski 提交于
We can't return from the middle of do_show(), because json_array will not be closed. Break out of the loop. Note that the error handling after the loop depends on errno, so no need to set err. Fixes: 831a0aaf ("tools: bpftool: add JSON output for `bpftool map *` commands") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NQuentin Monnet <quentin.monnet@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Thomas Gleixner 提交于
The LDT is inherited across fork() or exec(), but that makes no sense at all because exec() is supposed to start the process clean. The reason why this happens is that init_new_context_ldt() is called from init_new_context() which obviously needs to be called for both fork() and exec(). It would be surprising if anything relies on that behaviour, so it seems to be safe to remove that misfeature. Split the context initialization into two parts. Clear the LDT pointer and initialize the mutex from the general context init and move the LDT duplication to arch_dup_mmap() which is only called on fork(). Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: dan.j.williams@intel.com Cc: hughd@google.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: linux-mm@kvack.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 22 12月, 2017 1 次提交
-
-
由 Quentin Monnet 提交于
Makefile has a LLC variable that is initialised to "llc", but can theoretically be overridden from the command line ("make LLC=llc-6.0"). However, this fails because for LLVM probe check, "llc" is called directly. Use the $(LLC) variable instead to fix this. Fixes: 22c88526 ("bpf: improve selftests and add tests for meta pointer") Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 21 12月, 2017 4 次提交
-
-
由 Stefan Raspl 提交于
Sort the fields returned by specifying '-f help' on the command line. While at it, simplify the code a bit, indent the output and eliminate an extra blank line at the beginning. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Alexei Starovoitov 提交于
Do not allow root to convert valid pointers into unknown scalars. In particular disallow: ptr &= reg ptr <<= reg ptr += ptr and explicitly allow: ptr -= ptr since pkt_end - pkt == length 1. This minimizes amount of address leaks root can do. In the future may need to further tighten the leaks with kptr_restrict. 2. If program has such pointer math it's likely a user mistake and when verifier complains about it right away instead of many instructions later on invalid memory access it's easier for users to fix their progs. 3. when register holding a pointer cannot change to scalar it allows JITs to optimize better. Like 32-bit archs could use single register for pointers instead of a pair required to hold 64-bit scalars. 4. reduces architecture dependent behavior. Since code: r1 = r10; r1 &= 0xff; if (r1 ...) will behave differently arm64 vs x64 and offloaded vs native. A significant chunk of ptr mangling was allowed by commit f1174f77 ("bpf/verifier: rework value tracking") yet some of it was allowed even earlier. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Jann Horn 提交于
These tests should cover the following cases: - MOV with both zero-extended and sign-extended immediates - implicit truncation of register contents via ALU32/MOV32 - implicit 32-bit truncation of ALU32 output - oversized register source operand for ALU32 shift - right-shift of a number that could be positive or negative - map access where adding the operation size to the offset causes signed 32-bit overflow - direct stack access at a ~4GiB offset Also remove the F_LOAD_WITH_STRICT_ALIGNMENT flag from a bunch of tests that should fail independent of what flags userspace passes. Signed-off-by: NJann Horn <jannh@google.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Naresh Kamboju 提交于
kernel config fragement CONFIG_NUMA=y is need for reuseport_bpf_numa. Signed-off-by: NNaresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 12月, 2017 1 次提交
-
-
由 David Miller 提交于
I'm getting various build failures on sparc64. The key is usually that the userland tools get built 32-bit. 1) clock_gettime() is in librt, so that must be added to the link libraries. 2) "sizeof(x)" must be printed with "%Z" printf prefix. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 19 12月, 2017 2 次提交
-
-
由 Juan Zea 提交于
usbip bind writes commands followed by random string when writing to match_busid attribute in sysfs, caused by using full variable size instead of string length. Signed-off-by: NJuan Zea <juan.zea@qindel.com> Acked-by: NShuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Hendrik Brueckner 提交于
With 720f228e ("bpf: fix broken BPF selftest build") the inclusion of arch-specific header files changed. Including the asm/bpf_perf_event.h on s390, correctly includes the s390 specific header file. This header file tries then to include the s390 asm/ptrace.h and the build fails with: cc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../../include/generated -I../../../include test_verifier.c +/root/git/linux/tools/testing/selftests/bpf/libbpf.a /root/git/linux/tools/testing/selftests/bpf/cgroup_helpers.c -lcap -lelf -o +/root/git/linux/tools/testing/selftests/bpf/test_verifier In file included from ../../../include/uapi/asm/bpf_perf_event.h:4:0, from ../../../include/uapi/linux/bpf_perf_event.h:11, from test_verifier.c:29: ../../../include/uapi/../../arch/s390/include/uapi/asm/bpf_perf_event.h:7:9: error: unknown type name 'user_pt_regs' typedef user_pt_regs bpf_user_pt_regs_t; ^~~~~~~~~~~~ make: *** [../lib.mk:109: /root/git/linux/tools/testing/selftests/bpf/test_verifier] Error 1 This is caused by a recent update to the s390 asm/ptrace.h file that is not (yet) available in the local installation. That means, the s390 asm/ptrace.h must be included from the tools/arch/s390 directory. Because there is no proper framework to deal with asm specific includes in tools/, slightly modify the s390 asm/bpf_perf_event.h to include the local ptrace.h header file. See also discussion on https://marc.info/?l=linux-s390&m=151359424420691&w=2 Please note that this needs to be preserved until tools/ is able to correctly handle asm specific headers. References: https://marc.info/?l=linux-s390&m=151359424420691&w=2 Fixes: 720f228e ("bpf: fix broken BPF selftest build") Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 18 12月, 2017 4 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Long ago we decided to be verbotten including files in the kernel git sources from tools/ living source code, to avoid disturbing kernel development (and perf's and other tools/) when, say, a kernel hacker adds something, tests everything but tools/ and have tools/ build broken. This got broken recently by s/390, fix it by copying arch/s390/include/uapi/asm/perf_regs.h to tools/arch/s390/include/uapi/asm/, making this one be used by means of <asm/perf_regs.h> and updating tools/perf/check_headers.sh to make sure we are notified when the original changes, so that we can check if anything is needed on the tooling side. This would have been caught by the 'tarkpg' test entry in: $ make -C tools/perf build-test When run on a s/390 build system or container. Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: f704ef44 ("s390/perf: add support for perf_regs and libdw") Link: https://lkml.kernel.org/n/tip-n57139ic0v9uffx8wdqi3d8a@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ben Gainey 提交于
tools/perf/jvmti is broken in so far as it generates incorrect debug information. Specifically it attributes all debug lines to the original method being output even in the case that some code is being inlined from elsewhere. This patch fixes the issue. To test (from within linux/tools/perf): export JDIR=/usr/lib/jvm/java-8-openjdk-amd64/ make cat << __EOF > Test.java public class Test { private StringBuilder b = new StringBuilder(); private void loop(int i, String... args) { for (String a : args) b.append(a); long hc = b.hashCode() * System.nanoTime(); b = new StringBuilder(); b.append(hc); System.out.printf("Iteration %d = %d\n", i, hc); } public void run(String... args) { for (int i = 0; i < 10000; ++i) { loop(i, args); } } public static void main(String... args) { Test t = new Test(); t.run(args); } } __EOF $JDIR/bin/javac Test.java ./perf record -F 10000 -g -k mono $JDIR/bin/java -agentpath:`pwd`/libperf-jvmti.so Test ./perf inject --jit -i perf.data -o perf.data.jitted ./perf annotate -i perf.data.jitted --stdio | grep Test\.java: | sort -u Before this patch, Test.java line numbers get reported that are greater than the number of lines in the Test.java file. They come from the source file of the inlined function, e.g. java/lang/String.java:1085. For further validation one can examine those lines in the JDK source distribution and confirm that they map to inlined functions called by Test.java. After this patch, the filename of the inlined function is output rather than the incorrect original source filename. Signed-off-by: NBen Gainey <ben.gainey@arm.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Tested-by: NStephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Colin King <colin.king@canonical.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 598b7c69 ("perf jit: add source line info support") Link: http://lkml.kernel.org/r/20171122182541.d25599a3eb1ada3480d142fa@arm.comSigned-off-by: NKim Phillips <kim.phillips@arm.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
On Fedora systems the perl and python CFLAGS/LDFLAGS include the hardened specs from redhat-rpm-config package. We apply them only for perl/python objects, which makes them not compatible with the rest of the objects and the build fails with: /usr/bin/ld: perf-in.o: relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -f +PIC /usr/bin/ld: libperf.a(libperf-in.o): relocation R_X86_64_32S against `.text' can not be used when making a shared object; recompile w +ith -fPIC /usr/bin/ld: final link failed: Nonrepresentable section on output collect2: error: ld returned 1 exit status make[2]: *** [Makefile.perf:507: perf] Error 1 make[1]: *** [Makefile.perf:210: sub-make] Error 2 make: *** [Makefile:69: all] Error 2 Mainly it's caused by perl/python objects being compiled with: -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 which prevent the final link impossible, because it will check for 'proper' objects with following option: -specs=/usr/lib/rpm/redhat/redhat-hardened-ld Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20171204082437.GC30564@kravaSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Using the shell function for perl CFLAGS retrieval instead of back quotes (``). Both execute shell with the command, but the latter is more explicit and seems to be the preferred way. Also we don't have any other use of the back quotes in perf Makefiles. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171108102739.30338-2-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 16 12月, 2017 1 次提交
-
-
由 Daniel Borkmann 提交于
Add a test that i) uses LD_ABS, ii) zeroing R6 before call, iii) calls a helper that triggers reload of cached skb data, iv) uses LD_ABS again. It's added for test_bpf in order to do runtime testing after JITing as well as test_verifier to test that the sequence is allowed. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
- 15 12月, 2017 4 次提交
-
-
由 Ingo Molnar 提交于
Two kernel headers got modified recently, which are used by tooling as well: tools/include/uapi/linux/kvm.h arch/x86/include/asm/cpufeatures.h None of those changes have an effect on tooling, so do a plain copy. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
This fixes the following warning: warning: objtool: x86 instruction decoder differs from kernel Note that there are cleanups queued up for v4.16 that will make this warning more informative and will make the syncing easier as well. Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Randy Dunlap 提交于
Update x86-opcode-map.txt based on the October 2017 Intel SDM publication. Fix INVPID to INVVPID. Add UD0 and UD1 instruction opcodes. Also sync the objtool and perf tooling copies of this file. Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Acked-by: NMasami Hiramatsu <mhiramat@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/aac062d7-c0f6-96e3-5c92-ed299e2bd3da@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Liu, Changcheng 提交于
On some linux distributions, the default link of sh is dash which deoesn't support split array like "${var//,/ }" It's better to force to use bash shell directly. Link: http://lkml.kernel.org/r/20171208093751.GA175471@sofiaSigned-off-by: NLiu Changcheng <changcheng.liu@intel.com> Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 12月, 2017 3 次提交
-
-
由 Stefan Raspl 提交于
Add a line for the total number of events and current average at the bottom of the body. Note that both values exclude child trace events. I.e. if drilldown is activated via interactive command 'x', only the totals are accounted, or we'd be counting these twice (see previous commit "tools/kvm_stat: fix child trace events accounting"). Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Unhandled arguments, which could easily include typos, are simply ignored. We should be strict to avoid undetected typos. To reproduce start kvm_stat with an extra argument, e.g. 'kvm_stat -d bnuh5ol' and note that this will actually work. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Stefan Raspl 提交于
Errors while parsing the '-g' command line argument result in display of usage information prior to the error message. This is a bit confusing, as the command line is syntactically correct. To reproduce, run 'kvm_stat -g' and specify a non-existing or inactive guest. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-