- 22 6月, 2016 7 次提交
-
-
由 David Howells 提交于
Kill off the concept of maintaining a bundle of connections to a particular target service to increase the number of call slots available for any beyond four for that service (there are four call slots per connection). This will make cleaning up the connection handling code easier and facilitate removal of the rxrpc_transport struct. Bundling can be reintroduced later if necessary. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Provide refcount helper functions for connections so that the code doesn't touch local or connection usage counts directly. Also make it such that local and peer put functions can take a NULL pointer. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Make rxrpc_send_packet() take a connection not a transport as part of the phasing out of the rxrpc_transport struct. Whilst we're at it, rename the function to rxrpc_send_data_packet() to differentiate it from the other packet sending functions. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Use the IDR facility to allocate client connection IDs on a machine-wide basis so that each client connection has a unique identifier. When the connection ID space wraps, we advance the epoch by 1, thereby effectively having a 62-bit ID space. The IDR facility is then used to look up client connections during incoming packet routing instead of using an rbtree rooted on the transport. This change allows for the removal of the transport in the future and also means that client connections can be looked up directly in the data-ready handler by connection ID. The ID management code is placed in a new file, conn-client.c, to which all the client connection-specific code will eventually move. Note that the IDR tree gets very expensive on memory if the connection IDs are widely scattered throughout the number space, so we shall need to retire connections that have, say, an ID more than four times the maximum number of client conns away from the current allocation point to try and keep the IDs concentrated. We will also need to retire connections from an old epoch. Also note that, for the moment, a pointer to the transport has to be passed through into the ID allocation function so that we can take a BH lock to prevent a locking issue against in-BH lookup of client connections. This will go away later when RCU is used for server connections also. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Pass a pointer to struct sk_buff rather than struct rxrpc_host_header to functions so that they can in the future get at transport protocol parameters rather than just RxRPC parameters. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
"Exclusive connections" are meant to be used for a single client call and then scrapped. The idea is to limit the use of the negotiated security context. The current code, however, isn't doing this: it is instead restricting the socket to a single virtual connection and doing all the calls over that. This is changed such that the socket no longer maintains a special virtual connection over which it will do all the calls, but rather gets a new one each time a new exclusive call is made. Further, using a socket option for this is a poor choice. It should be done on sendmsg with a control message marker instead so that calls can be marked exclusive individually. To that end, add RXRPC_EXCLUSIVE_CALL which, if passed to sendmsg() as a control message element, will cause the call to be done on an single-use connection. The socket option (RXRPC_EXCLUSIVE_CONNECTION) still exists and, if set, will override any lack of RXRPC_EXCLUSIVE_CALL being specified so that programs using the setsockopt() will appear to work the same. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Define and use a structure to hold connection parameters. This makes it easier to pass multiple connection parameters around. Define and use a structure to hold protocol information used to hash a connection for lookup on incoming packet. Most of these fields will be disposed of eventually, including the duplicate local pointer. Whilst we're at it rename "proto" to "family" when referring to a protocol family. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 15 6月, 2016 5 次提交
-
-
由 David Howells 提交于
Rework the local RxRPC endpoint management. Local endpoint objects are maintained in a flat list as before. This should be okay as there shouldn't be more than one per open AF_RXRPC socket (there can be fewer as local endpoints can be shared if their local service ID is 0 and they share the same local transport parameters). Changes: (1) Local endpoints may now only be shared if they have local service ID 0 (ie. they're not being used for listening). This prevents a scenario where process A is listening of the Cache Manager port and process B contacts a fileserver - which may then attempt to send CM requests back to B. But if A and B are sharing a local endpoint, A will get the CM requests meant for B. (2) We use a mutex to handle lookups and don't provide RCU-only lookups since we only expect to access the list when opening a socket or destroying an endpoint. The local endpoint object is pointed to by the transport socket's sk_user_data for the life of the transport socket - allowing us to refer to it directly from the sk_data_ready and sk_error_report callbacks. (3) atomic_inc_not_zero() now exists and can be used to only share a local endpoint if the last reference hasn't yet gone. (4) We can remove rxrpc_local_lock - a spinlock that had to be taken with BH processing disabled given that we assume sk_user_data won't change under us. (5) The transport socket is shut down before we clear the sk_user_data pointer so that we can be sure that the transport socket's callbacks won't be invoked once the RCU destruction is scheduled. (6) Local endpoints have a work item that handles both destruction and event processing. The means that destruction doesn't then need to wait for event processing. The event queues can then be cleared after the transport socket is shut down. (7) Local endpoints are no longer available for resurrection beyond the life of the sockets that had them open. As soon as their last ref goes, they are scheduled for destruction and may not have their usage count moved from 0. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Separate local endpoint event handling out into its own file preparatory to overhauling the object management aspect (which remains in the original file). Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Use the peer record to distribute network errors rather than the transport object (which I want to get rid of). An error from a particular peer terminates all calls on that peer. For future consideration: (1) For ICMP-induced errors it might be worth trying to extract the RxRPC header from the offending packet, if one is returned attached to the ICMP packet, to better direct the error. This may be overkill, though, since an ICMP packet would be expected to be relating to the destination port, machine or network. RxRPC ABORT and BUSY packets give notice at RxRPC level. (2) To also abort connection-level communications (such as CHALLENGE packets) where indicted by an error - but that requires some revamping of the connection event handling first. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Rename rxrpc_UDP_error_report() to rxrpc_error_report() as it might get called for something other than UDP. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Rework peer object handling to use a hash table instead of a flat list and to use RCU. Peer objects are no longer destroyed by passing them to a workqueue to process, but rather are just passed to the RCU garbage collector as kfree'able objects. The hash function uses the local endpoint plus all the components of the remote address, except for the RxRPC service ID. Peers thus represent a UDP port on the remote machine as contacted by a UDP port on this machine. The RCU read lock is used to handle non-creating lookups so that they can be called from bottom half context in the sk_error_report handler without having to lock the hash table against modification. rxrpc_lookup_peer_rcu() *does* take a reference on the peer object as in the future, this will be passed to a work item for error distribution in the error_report path and this function will cease being used in the data_ready path. Creating lookups are done under spinlock rather than mutex as they might be set up due to an external stimulus if the local endpoint is a server. Captured network error messages (ICMP) are handled with respect to this struct and MTU size and RTT are cached here. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 13 6月, 2016 1 次提交
-
-
由 David Howells 提交于
Update the section comments in ar-internal.h that indicate the locations of the referenced items to reflect the renames done to the .c files in net/rxrpc/. This also involves some rearrangement to reflect keep the sections in order of filename. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 11 6月, 2016 1 次提交
-
-
由 David Howells 提交于
Limit the socket incoming call backlog queue size so that a remote client can't pump in sufficient new calls that the server runs out of memory. Note that this is partially theoretical at the moment since whilst the number of calls is limited, the number of packets trying to set up new calls is not. This will be addressed in a later patch. If the caller of listen() specifies a backlog INT_MAX, then they get the current maximum; anything else greater than max_backlog or anything negative incurs EINVAL. The limit on the maximum queue size can be set by: echo N >/proc/sys/net/rxrpc/max_backlog where 4<=N<=32. Further, set the default backlog to 0, requiring listen() to be called before we start actually queueing new calls. Whilst this kind of is a change in the UAPI, the caller can't actually *accept* new calls anyway unless they've first called listen() to put the socket into the LISTENING state - thus the aforementioned new calls would otherwise just sit there, eating up kernel memory. (Note that sockets that don't have a non-zero service ID bound don't get incoming calls anyway.) Given that the default backlog is now 0, make the AFS filesystem call kernel_listen() to set the maximum backlog for itself. Possible improvements include: (1) Trimming a too-large backlog to max_backlog when listen is called. (2) Trimming the backlog value whenever the value is used so that changes to max_backlog are applied to an open socket automatically. Note that the AFS filesystem opens one socket and keeps it open for extended periods, so would miss out on changes to max_backlog. (3) Having a separate setting for the AFS filesystem. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 6月, 2016 1 次提交
-
-
由 David Howells 提交于
Simplify the RxRPC connect() implementation. It will just note the destination address it is given, and if a sendmsg() comes along with no address, this will be assigned as the address. No transport struct will be held internally, which will allow us to remove this later. Simplify sendmsg() also. Whilst a call is active, userspace refers to it by a private unique user ID specified in a control message. When sendmsg() sees a user ID that doesn't map to an extant call, it creates a new call for that user ID and attempts to add it. If, when we try to add it, the user ID is now registered, we now reject the message with -EEXIST. We should never see this situation unless two threads are racing, trying to create a call with the same ID - which would be an error. It also isn't required to provide sendmsg() with an address - provided the control message data holds a user ID that maps to a currently active call. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 6月, 2016 1 次提交
-
-
由 Joe Perches 提交于
Use the more common kernel logging style and reduce object size. The logging message prefix changes from a mixture of "RxRPC:" and "RXRPC:" to "af_rxrpc: ". $ size net/rxrpc/built-in.o* text data bss dec hex filename 64172 1972 8304 74448 122d0 net/rxrpc/built-in.o.new 67512 1972 8304 77788 12fdc net/rxrpc/built-in.o.old Miscellanea: o Consolidate the ASSERT macros to use a single pr_err call with decimal and hexadecimal output and a stringified #OP argument Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 4月, 2016 6 次提交
-
-
由 David Howells 提交于
Create a null security type for security index 0 and get rid of all conditional calls to the security operations. We expect normally to be using security, so this should be of little negative impact. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
Absorb the rxkad security module into the af_rxrpc module so that there's only one module file. This avoids a circular dependency whereby rxkad pins af_rxrpc and cached connections pin rxkad but can't be manually evicted (they will expire eventually and cease pinning). With this change, af_rxrpc can just be unloaded, despite having cached connections. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
Don't pass gfp around in incoming call handling functions, but rather hard code it at the points where we actually need it since the value comes from within the rxrpc driver and is always the same. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
In the rxrpc_connection and rxrpc_call structs, there's one field to hold the abort code, no matter whether that value was generated locally to be sent or was received from the peer via an abort packet. Split the abort code fields in two for cleanliness sake and add an error field to hold the Linux error number to the rxrpc_call struct too (sometimes this is generated in a context where we can't return it to userspace directly). Furthermore, add a skb mark to indicate a packet that caused a local abort to be generated so that recvmsg() can pick up the correct abort code. A future addition will need to be to indicate to userspace the difference between aborts via a control message. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
Static arrays of strings should be const char *const[]. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
Move some miscellaneous bits out into their own file to make it easier to split the call handling. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 3月, 2016 1 次提交
-
-
由 David Howells 提交于
Replace all "unsigned" types with "unsigned int" types. Reported-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2016 4 次提交
-
-
由 David Howells 提交于
Remove some excess whitespace, insert some missing spaces and adjust a couple of comments. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Currently, a copy of the Rx packet header is copied into the the sk_buff private data so that we can advance the pointer into the buffer, potentially discarding the original. At the moment, this copy is held in network byte order, but this means we're doing a lot of unnecessary translations. The reasons it was done this way are that we need the values in network byte order occasionally and we can use the copy, slightly modified, as part of an iov array when sending an ack or an abort packet. However, it seems more reasonable on review that it would be better kept in host byte order and that we make up a new header when we want to send another packet. To this end, rename the original header struct to rxrpc_wire_header (with BE fields) and institute a variant called rxrpc_host_header that has host order fields. Change the struct in the sk_buff private data into an rxrpc_host_header and translate the values when filling it in. This further allows us to keep values kept in various structures in host byte order rather than network byte order and allows removal of some fields that are byteswapped duplicates. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Rename call event names to begin RXRPC_CALL_EV_ to distinguish them from the flags. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Convert call flag and event numbers into enums and move their definitions outside of the struct. Also move the call state enum outside of the struct and add an extra element to count the number of states. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 27 1月, 2016 1 次提交
-
-
由 Herbert Xu 提交于
This patch replaces uses of blkcipher with skcipher. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 21 9月, 2015 1 次提交
-
-
由 Ksenija Stanojevic 提交于
Replace time_t type and get_seconds function which are not y2038 safe on 32-bit systems. Function ktime_get_seconds use monotonic instead of real time and therefore will not cause overflow. Signed-off-by: NKsenija Stanojevic <ksenija.stanojevic@gmail.com> Reviewed-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2015 1 次提交
-
-
由 David Howells 提交于
Handle VERSION Rx protocol packets. We should respond to a VERSION packet with a string indicating the Rx version. This is a maximum of 64 characters and is padded out to 65 chars with NUL bytes. Note that other AFS clients use the version request as a NAT keepalive so we need to handle it rather than returning an abort. The standard formulation seems to be: <project> <version> built <yyyy>-<mm>-<dd> for example: " OpenAFS 1.6.2 built 2013-05-07 " (note the three extra spaces) as obtained with: rxdebug grand.mit.edu -version from the openafs package. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 03 3月, 2015 1 次提交
-
-
由 Ying Xue 提交于
After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 4月, 2014 1 次提交
-
-
由 David S. Miller 提交于
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2014 1 次提交
-
-
由 Tim Smith 提交于
Keep track of rxrpc_call structures in a hashtable so they can be found directly from the network parameters which define the call. This allows incoming packets to be routed directly to a call without walking through hierarchy of peer -> transport -> connection -> call and all the spinlocks that that entailed. Signed-off-by: NTim Smith <tim@electronghost.co.uk> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 27 2月, 2014 2 次提交
-
-
由 David Howells 提交于
Expose RxRPC parameters via sysctls to control the Rx window size, the Rx MTU maximum size and the number of packets that can be glued into a jumbo packet. More info added to Documentation/networking/rxrpc.txt. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Add sysctls for configuring RxRPC protocol handling, specifically controls on delays before ack generation, the delay before resending a packet, the maximum lifetime of a call and the expiration times of calls, connections and transports that haven't been recently used. More info added in Documentation/networking/rxrpc.txt. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 20 10月, 2013 1 次提交
-
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 8月, 2010 1 次提交
-
-
由 David Howells 提交于
Add a dummy printk function for the maintenance of unused printks through gcc format checking, and also so that side-effect checking is maintained too. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 9月, 2009 1 次提交
-
-
由 David Howells 提交于
Use uX rather than uintX_t types for consistency. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 9月, 2009 1 次提交
-
-
由 David Howells 提交于
Allow add_key() and KEYCTL_INSTANTIATE to accept key payloads in XDR form as described by openafs-1.4.10/src/auth/afs_token.xg. This provides a way of passing kaserver, Kerberos 4, Kerberos 5 and GSSAPI keys from userspace, and allows for future expansion. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-