- 13 6月, 2013 1 次提交
-
-
由 Bard Liao 提交于
This patch adds the ALC5640 codec driver. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NBard Liao <bardliao@realtek.com> Tested-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 02 4月, 2013 1 次提交
-
-
由 Paul Bolle 提交于
The Kconfig symbol SND_SOC_OF_SIMPLE got removed in commit f0fba2ad ("ASoC: multi-component - ASoC Multi-Component Support"). But that commit missed one instance. Remove it now, together with the prompt it has effectively hidden ever since. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 08 3月, 2013 2 次提交
-
-
由 Daniel Mack 提交于
This patch adds a driver for TI's TA5086 6-channel PWM processor. This chip has a very unusual register layout, specifically because the registers are of unequal size, and multi-byte registers require bulk writes to take effect. Regmap does not support these kind of mappings. Currently, the driver does not touch any of the registers >= 0x20, so it doesn't matter, because the register map is mapped to an 8-bit array. In case more features will be added in the future that require access to higher registers, the entire regmap H/W I/O routines have to be open-coded. Signed-off-by: NDaniel Mack <zonque@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Daniel Mack 提交于
Adds a driver for Asahi Kasei's AK5386 Single-ended 24-Bit 192kHz delta-sigma ADC. The device has no control port interface but an optional RESET/PDN GPIO pin. Signed-off-by: NDaniel Mack <zonque@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 15 2月, 2013 1 次提交
-
-
由 Adam Thomson 提交于
This patch adds support for the Dialog DA7213 audio codec. Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 07 2月, 2013 3 次提交
-
-
由 Heiko Carstens 提交于
Fix these two compile errors on s390 which does not have HAS_IOPORT nor GENERIC_HARDIRQS: sound/pci/lx6464es/lx6464es.c: In function ‘snd_lx6464es_free’: sound/pci/lx6464es/lx6464es.c:565:2: error: implicit declaration of function ‘ioport_unmap’ sound/soc/codecs/wm8903.c: In function ‘wm8903_set_pdata_irq_trigger’: sound/soc/codecs/wm8903.c:1954:9: error: implicit declaration of function ‘irq_get_irq_data’ Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jerry Wong 提交于
This patch completes the replacement of the existing max98090 driver, by installing a more complete driver. Signed-off-by: NJerry Wong <jerry.wong@maximintegrated.com> Tested-by: NMatthew Mowdy <matthew.mowdy@maximintegrated.com> Reviewed-by: NRalph Birt <ralph.birt@maximintegrated.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jerry Wong 提交于
This patch removes the existing max98090 driver prior to installing a more complete one. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 19 1月, 2013 1 次提交
-
-
由 Joe Millenbach 提交于
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: NJoe Millenbach <jmillenbach@gmail.com> Reviewed-by: NJamey Sharp <jamey@minilop.net> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 21 11月, 2012 1 次提交
-
-
由 Kuninori Morimoto 提交于
This patch adds the max98090 codec prototype driver. It supports Headphone only at this point. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 29 10月, 2012 2 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Many current Wolfson devices feature DSPs based around an architecture known as ADSP. Since there is a lot of commonality in the system integration of these devices a common library will be used to provide support for them. This version provides equivalent support for ADSP1 to that currently included in the WM2200 driver. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 28 10月, 2012 1 次提交
-
-
由 Lars-Peter Clausen 提交于
Use regmap-mmio instead of open-coding caching and register accessors. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 15 10月, 2012 1 次提交
-
-
由 Andrey Smirnov 提交于
This commit add a sound codec driver for Silicon Laboratories 476x series of AM/FM radio chips. Signed-off-by: NAndrey Smirnov <andrey.smirnov@convergeddevices.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 28 9月, 2012 1 次提交
-
-
由 Ashish Chavan 提交于
This patch adds support for Dialog semiconductor's DA9055 audio codec. This has been tested on DA9055 EVB with Samsung SMDK6410 board. Signed-off-by: NAshish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: NDavid Dajun Chen <david.chen@diasemi.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 8月, 2012 1 次提交
-
-
由 Dimitris Papastamos 提交于
The WM0010 is a compact digital signal processor that has been highly optimised for low-power audio applications. Extensive memory resources and core optimisation allow the device to manage all audio processing algorithms efficiently and autonomously, while the host processor sleeps or performs other tasks. Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 11 7月, 2012 1 次提交
-
-
由 Mark Brown 提交于
The WM5110 is a highly integrated low power audio subsystem for smartphones, tablets and other portable audio devices. It combines an advanced DSP feature set with a flexible, high performance audio hub CODEC. This patch adds the audio CODEC driver for the device. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 7月, 2012 1 次提交
-
-
由 Rajeev Kumar 提交于
The STA529 is a digital stereo class-D audio amplifier. It includes an audio DSP, an ST proprietary high-efficiency class-D driver and CMOS power output stage. It is intended for high-efficiency digital-to-power-audio conversion for portable applications. Signed-off-by: NRajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 6月, 2012 2 次提交
-
-
由 Mark Brown 提交于
The WM5102 is a highly-integrated low-power audio system for smartphones, tablets and other portable audio devices based on the Arizona platform. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The Wolfson Arizona series of audio hub CODECs can share a large amount of their driver code as the result of a common register map. This patch adds some of this core support, providing a basis for the initial WM5102 audio driver. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 11 6月, 2012 2 次提交
-
-
由 Adam Thomson 提交于
This patch adds support for Dialog DA732x audio codecs. Signed-off-by: NMichal Hajduk <Michal.Hajduk@diasemi.com> Signed-off-by: NAdam Thomson <Adam.Thomson@diasemi.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ola Lilja 提交于
Add codec-driver for ST-Ericsson AB8500 mixed-signal ASIC. Signed-off-by: NOla Lilja <ola.o.lilja@stericsson.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 6月, 2012 1 次提交
-
-
由 M R Swami Reddy 提交于
ASoC: Support TI Isabelle Audio driver The Isabelle Audio IC is a complete low power high fidelity CODEC with integrated ADCs, DACs, decimation and interpolation filters, PLL, and power providers. This device supports 2 analog and 2 digital microphone channels, a mono earpiece driver, stereo class G headphone drivers with ultra low power and best SNR in the industry, stereo Class D speaker drivers, and 2 high performance Line drivers. The below patch is a basic driver code for TI Isabelle audio codec. The functionalities like headset detection, etc., will be included incrementally in the up-coming patches. Signed-off-by: NVishwas A Deshpande <vishwas.a.deshpande@ti.com> Signed-off-by: NM R Swami Reddy <mr.swami.reddy@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 19 5月, 2012 1 次提交
-
-
由 Ricardo Neri 提交于
Introduce codec for HDMI. At the moment, this is a dummy codec. In the future it will parse the EDID to modify the supported parameters, such as the number of channels and the sample rates. At the moment, it blindly supports all the sample rates and audio channels described in the HDMI 1.4a specification. Signed-off-by: NRicardo Neri <ricardo.neri@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 18 5月, 2012 1 次提交
-
-
由 Philippe Rétornaz 提交于
Signed-off-by: NPhilippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 01 5月, 2012 1 次提交
-
-
由 Brian Austin 提交于
This patch adds support for Cirrus Logic CS42L52 Low Power Stereo Codec Signed-off-by: NBrian Austin <brian.austin@cirrus.com> Signed-off-by: NGeorgi Vlaev <joe@nucleusys.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 16 4月, 2012 1 次提交
-
-
由 Peter Ujfalusi 提交于
Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: NMark Brown <broonie@opensource.wolfsonicro.com> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 01 4月, 2012 2 次提交
-
-
由 M R Swami Reddy 提交于
Signed-off-by: NM R Swami Reddy <mr.swami.reddy@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Tomoya MORINAGA 提交于
ML26124-01HB/ML26124-02GD is 16bit monaural audio CODEC which has high resistance to voltage noise. On chip regulator realizes power supply rejection ratio be over 90dB so more than 50dB is improved than ever. ML26124-01HB/ ML26124-02GD can deliver stable audio performance without being affected by noise from the power supply circuit and peripheral components. The chip also includes a composite video signal output, which can be applied to various portable device requirements. The ML26124 is realized these functions into very small package the size is only 2.56mm x 2.46mm therefore can be construct high quality sound system easily. ML26124-01HB is 25pin WCSP package; ML26124-02GD is 32pin WQFN package. Signed-off-by: NTomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 31 1月, 2012 1 次提交
-
-
由 Wolfram Sang 提交于
Add a driver supporting the volume control and the mute pin. Shdn pin and DAPM are not taken care of yet. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 27 1月, 2012 1 次提交
-
-
由 Mark Brown 提交于
The WM2200 is a low power mobile CODEC with enhanced Wolfson myZone Ambient Noise Cancellation (ANC) intended for mobile telephony applications. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 12月, 2011 1 次提交
-
-
由 Axel Lin 提交于
Currently SND_SOC_JZ4740_CODEC depends on SOC_JZ4740 but SOC_JZ4740 is not defined in any Kconfig. Thus the codec driver will not be built when select "Build all ASoC CODEC drivers". (Unless it is selected by SND_JZ4740_SOC_QI_LB60). Remove the dependency with SOC_JZ4740, then this code driver can be built when select "Build all ASoC CODEC drivers". Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 12月, 2011 2 次提交
-
-
由 Mark Brown 提交于
The driver itself has been a regular CODEC driver for a while now. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
We've been able to handle external amps for a while now. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 29 11月, 2011 1 次提交
-
-
由 Lars-Peter Clausen 提交于
It has been pointed out previously, that the firmware subsystem is not the right place for the SigmaDSP firmware loader. Furthermore the SigmaDSP is currently only used in audio products and we are aiming for better integration into the ASoC framework in the future, with support for ALSA controls for firmware parameters and support dynamic power management as well. So the natural choice for the SigmaDSP firmware loader is the ASoC subsystem. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 18 11月, 2011 1 次提交
-
-
由 Brian Austin 提交于
This patch adds support for the Cirrus Logic CS42L73 low power stereo codec. Signed-off-by: NBrian Austin <brian.austin@cirrus.com> Signed-off-by: NGeorgi Vlaev <joe@nucleusys.com> Acked-by: NVinod Koul <vinod.koul@linux.intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 11月, 2011 1 次提交
-
-
由 Leon Romanovsky 提交于
This driver implements basic functionality, using I²C for the control channel. Signed-off-by: NLeon Romanovsky <leon@leon.nu> Signed-off-by: NAndrey Danin <danindrey@mail.ru> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 11 10月, 2011 1 次提交
-
-
由 Wolfram Sang 提交于
It is currently named "TVL" instead of "TLV". Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 9月, 2011 1 次提交
-
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 9月, 2011 1 次提交
-
-
由 Mark Brown 提交于
The WM5100 is a highly integrated low power audio subsystem with advanced digital signal processing capabilities including effects, speech clarity enhancement and active noise cancellation. This initial driver provides support for basic audio paths, further patches will provide more complete functionality. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-