End addresses in 'struct resource' are inclusive -- fix the common
orion5x code to pass in the proper end addresses when instantiating
the two on-chip EHCI controllers.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NNicolas Pitre <nico@marvell.com>

The current orion5x board ->map_irq() routines check whether a
given bus number lives on the PCIe controller by comparing it with
the PCIe controller's primary bus number.  This doesn't work in
case there are multiple buses in the PCIe domain, i.e. if there
exists a PCIe bridge on the primary PCIe bus.

This patch adds a helper function (orion5x_pci_map_irq()) that
returns the IRQ number for the given PCI device if that device has
a hard-wired IRQ, or -1 otherwise, and makes each board's
->map_irq() function use this helper function.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NNicolas Pitre <nico@marvell.com>

The ioremap() optimization used for internal register didn't cope
with the fact that paddr + size can wrap to zero if the area extends
to the end of the physical address space.

Issue isolated by Sylver Bruneau <sylver.bruneau@googlemail.com>.
Signed-off-by: NNicolas Pitre <nico@marvell.com>

Since the Feroceon cache replacement policy is always pseudorandom
(and the relevant control register bit is ignored), remove the
CONFIG_CPU_CACHE_ROUND_ROBIN check from proc-feroceon.S.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NNicolas Pitre <nico@marvell.com>

Since the Feroceon doesn't have a global WT override bit like
ARM926 does, remove all code relating to this mode of operation
from proc-feroceon.S.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NNicolas Pitre <nico@marvell.com>

The ARM kprobes arithmetic immediate instruction decoder
(space_cccc_001x()) was accidentally zero'ing out not only the Rn and
Rd arguments, but the lower nibble of the immediate argument as well
-- this patch fixes this.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Acked-by: NNicolas Pitre <nico@marvell.com>

It is more useful to flush the cache with the actual buffer address
rather than the address containing a pointer to the buffer.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Acked-by: NLennert Buytenhek <buytenh@marvell.com>

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (80 commits)
  SUNRPC: Invalidate the RPCSEC_GSS session if the server dropped the request
  make nfs_automount_list static
  NFS: remove duplicate flags assignment from nfs_validate_mount_data
  NFS - fix potential NULL pointer dereference v2
  SUNRPC: Don't change the RPCSEC_GSS context on a credential that is in use
  SUNRPC: Fix a race in gss_refresh_upcall()
  SUNRPC: Don't disconnect more than once if retransmitting NFSv4 requests
  SUNRPC: Remove the unused export of xprt_force_disconnect
  SUNRPC: remove XS_SENDMSG_RETRY
  SUNRPC: Protect creds against early garbage collection
  NFSv4: Attempt to use machine credentials in SETCLIENTID calls
  NFSv4: Reintroduce machine creds
  NFSv4: Don't use cred->cr_ops->cr_name in nfs4_proc_setclientid()
  nfs: fix printout of multiword bitfields
  nfs: return negative error value from nfs{,4}_stat_to_errno
  NLM/lockd: Ensure client locking calls use correct credentials
  NFS: Remove the buggy lock-if-signalled case from do_setlk()
  NLM/lockd: Fix a race when cancelling a blocking lock
  NLM/lockd: Ensure that nlmclnt_cancel() returns results of the CANCEL call
  NLM: Remove the signal masking in nlmclnt_proc/nlmclnt_cancel
  ...

* 'for-linus' of git://linux-nfs.org/~bfields/linux: (52 commits)
  knfsd: clear both setuid and setgid whenever a chown is done
  knfsd: get rid of imode variable in nfsd_setattr
  SUNRPC: Use unsigned loop and array index in svc_init_buffer()
  SUNRPC: Use unsigned index when looping over arrays
  SUNRPC: Update RPC server's TCP record marker decoder
  SUNRPC: RPC server still uses 2.4 method for disabling TCP Nagle
  NLM: don't let lockd exit on unexpected svc_recv errors (try #2)
  NFS: don't let nfs_callback_svc exit on unexpected svc_recv errors (try #2)
  Use a zero sized array for raw field in struct fid
  nfsd: use static memory for callback program and stats
  SUNRPC: remove svc_create_thread()
  nfsd: fix comment
  lockd: Fix stale nlmsvc_unlink_block comment
  NFSD: Strip __KERNEL__ testing from unexported header files.
  sunrpc: make token header values less confusing
  gss_krb5: consistently use unsigned for seqnum
  NFSD: Remove NFSv4 dependency on NFSv3
  SUNRPC: Remove PROC_FS dependency
  NFSD: Use "depends on" for PROC_FS dependency
  nfsd: move most of fh_verify to separate function
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (452 commits)
  V4L/DVB (7731): tuner-xc2028: fix signal strength calculus
  V4L/DVB (7730): tuner-xc2028: Fix SCODE load for MTS firmwares
  V4L/DVB (7729): Fix VIDIOCGAP corruption in ivtv
  V4L/DVB (7728): tea5761: bugzilla #10462: tea5761 autodetection code were broken
  V4L/DVB (7726): cx23885: Enable cx23417 support on the HVR1800
  V4L/DVB (7725): cx23885: Add generic cx23417 hardware encoder support
  V4L/DVB (7723): pvrusb2: Clean up input selection list generation in V4L interface
  V4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2
  V4L/DVB (7721): pvrusb2: Restructure cx23416 firmware loading to have a common exit point
  V4L/DVB (7720): pvrusb2: Fix bad error code on cx23416 firmware load failure
  V4L/DVB (7719): pvrusb2: Implement input selection enforcement
  V4L/DVB (7718): pvrusb2-dvb: update Kbuild selections
  V4L/DVB (7717): pvrusb2-dvb: add DVB-T support for Hauppauge pvrusb2 model 73xxx
  V4L/DVB (7716): pvrusb2: clean up global functions
  V4L/DVB (7715): pvrusb2: Clean out all use of __FUNCTION__
  V4L/DVB (7714): pvrusb2: Fix hang on module removal
  V4L/DVB (7713): pvrusb2: Implement cleaner DVB kernel thread shutdown
  V4L/DVB (7712): pvrusb2: Close connect/disconnect race
  V4L/DVB (7711): pvrusb2: Fix race on module unload
  V4L/DVB (7710): pvrusb2: Implement critical digital streaming quirk for onair devices
  ...

RFC 2203 requires the server to drop the request if it believes the
RPCSEC_GSS context is out of sequence. The problem is that we have no way
on the client to know why the server dropped the request. In order to avoid
spinning forever trying to resend the request, the safe approach is
therefore to always invalidate the RPCSEC_GSS context on every major
timeout.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

There are different tables for MTS firmwares. This should be taken into
account while selecting the proper firmware.

While at tuner-xc2028.h, improve some comments.

Thanks to Edward J. Sheldrake <ejs1920@yahoo.co.uk> for helping to
diagnose such troubles with PAL/I standard.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Frank Bennett reported that ivtv was causing skype to crash. With help
from one of their developers he showed it was a kernel problem.
VIDIOCGCAP copies a name into a fixed length buffer - ivtv uses names
that are too long and does not truncate them so corrupts a few bytes of
the app data area.

Possibly the names also want trimming but for now this should fix the
corruption case.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

cx23885: Enable cx23417 support on the HVR1800
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

cx23885: Add generic cx23417 hardware encoder support.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Change how list of possible pvrusb2 inputs is generated to include
only those interfaces that make sense for the interface instance.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

In the pvrusb2 driver, different interfaces (e.g. V4L, DVB) have
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

These changes are required with the addition of digital television support
for the Hauppauge HVR1900 & HVR1950, the OnAir Creator and Sasem USB HDTV
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch contains the following cleanups:
- make the following needlessly global function static:
  - pvr2_hdw_set_cur_freq()
- #if 0 the following unused global functions:
  - pvr2_hdw_get_state_name()
  - pvr2_hdw_get_debug_info_unlocked()
  - pvr2_hdw_get_debug_info_locked()
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Apparently the kernel developers no longer consider it proper
etiquette to use __FUNCTION__; everyone must instead use __func__
(even though it breaks with older compilers).  And worse still, actual
effort is being expended to sweep this change throughout the kernel
source tree.  Don't these people have better things to do?  So...
Completely clean out all use of __FUNCTION__ from the pvrusb2 driver
(it was just in the sysfs interface).  I'm not going to use __func__
either.  So there.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The pvrusb2 driver was getting had by this scenario:

1. Task A calls kthread_stop() for task B.
2. Before exiting, then Task B calls kthread_stop() for task C.

The problem is, kthread_stop() wants to allocate an internal resource
to itself (i.e. acquire a lock), which won't be released until
kthread_stop() returns.  But kthread_stop() won't return until task B
is dead.  But task B won't die until it finishes its call to
kthread_stop() for task C, and that will block waiting on the resource
already allocated inside task A.  Deadlock.

With the pvrusb2 driver, task A is the caller to pvr_exit(), task B is
the control thread run inside of pvrusb2-context.c, and task C is any
worker thread run inside of pvrusb2-hdw.c.

This problem got introduced by the previous threading setup change,
which was itself an attempt to fix a module tear-down race (which it
actually did fix).  The lesson here is that a task being waited on as
part of a kthread_stop() simply cannot be allow to also issue a
kthread_stop() - or we make sure not to issue the enclosing
kthread_stop() until we know that the inner kthread_stop() has
completed first.  The solution for the pvrusb2 driver is some hackish
code which changes the main control thread tear down into a two step
process.  This then makes it possible to delay issuing the
kthread_stop() on the control thread until after we know that
everything has been torn down first.  (And yes, we really need that
kthread_stop() because it's the only way to safely guarantee that a
module-referencing kernel thread has safely returned back out of the
module before we finally remove the module.)
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Earlier fix to handle DVB feed thread aborts was overly-aggressive.
We can take better advantage of what kthread_stop() can do.  This
change simplifies things.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

If a disconnect happens before initialization is completed, the
pvrusb2 driver can accidentally touch dangling pointers.  The whole
initialization function must be protected by the big_lock, and once
inside that lock, the initialization function should abort if it is
discovered that a disconnect has already taken place.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The pvrusb2 driver - for basically forever - was not enforcing a
proper module tear-down.  Kernel threads are used inside the driver
and all must be gone before the module can be safely removed.  This
changeset reimplements a chunk of pvrusb2-context.c to enforce this
correctly.  Unfortunately this is not a simple fix.  The new
implementation also cuts back on kernel thread usage; instead of there
being 1 control thread per instance now it's just 1 control thread
shared by all instances.  (By dropping to a single thread then the
module exit function can block on its shutdown and the thread itself
can monitor and cleanly shut down all of the other instances first.)
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Implement timed measurement of encoder operation for the first time it
is run.  This allows the driver to note when the encoder has been run
successfully for at least 1/4 second.  On top of that implement
various bits to ensure that the encoder has been run once before
digital streaming for OnAir devices.  This is done via several core
state machine tweaks.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Some tuners seem to not work in digital mode unless the encoder is
healthy.  Implement a device attribute to represent this flag and
modify the core state machines to enforce this requirement.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

If the device fails to stream, the feed thread will block forever
waiting for buffers.  But while in this state it was not looking for
an exit condition from the driver DVB interface.  This caused the
thread to jam.  Implement a new stop flag (which will be set
appropriately) to tell the thread to stop.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

When the DVB interface is not compiled, the pvr2_dvb_props struct is
not available - so it really should be ifdef'ed out as well.  This
didn't cause an error because in this context its usage was as an
opaque pointer.  But it really shouldn't be present at all if DVB is
not enabled.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The commands to start / stop USB streaming for an analog device are
fairly standard, owing to the fact that all supported devices
apparently started from the same common reference design.  However
with digital mode, the commands seem to vary by vendor.  This change
makes that variance more explicit.  It also cleans up a related
problem for OnAir devices which prevented digital mode from working at
all.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>