commit f7daefe4231e57381d92c2e2ad905a899c28e402 upstream
Update based on current code.

CPU0:				       CPU1:
backing_dev_show		       backing_dev_store
    ......				   ......
    file = zram->backing_dev;
    down_read(&zram->init_lock);	   down_read(&zram->init_init_lock)
    file_path(file, ...);		   zram->backing_dev = backing_dev;
    up_read(&zram->init_lock);		   up_read(&zram->init_lock);

gets the value of zram->backing_dev too early in backing_dev_show, which
resultin the value being NULL at the beginning, and not NULL later.

backtrace:
  d_path+0xcc/0x174
  file_path+0x10/0x18
  backing_dev_show+0x40/0xb4
  dev_attr_show+0x20/0x54
  sysfs_kf_seq_show+0x9c/0x10c
  kernfs_seq_show+0x28/0x30
  seq_read+0x184/0x488
  kernfs_fop_read+0x5c/0x1a4
  __vfs_read+0x44/0x128
  vfs_read+0xa0/0x138
  SyS_read+0x54/0xb4

Link: http://lkml.kernel.org/r/1571046839-16814-1-git-send-email-chenwandun@huawei.comSigned-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Signed-off-by: NChenwandun <chenwandun@huawei.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>	[4.14+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 36a7347de097edf9c4d7203d09fa223c86479674 upstream

When we truncate a short write to have it retried, pass the truncated
length to the page_done callback instead of the full length.
Signed-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 79d08f89bb1b5c2c1ff90d9bb95497ab9e8aa7e0 upstream

'bio->bi_iter.bi_size' is 'unsigned int', which at most hold 4G - 1
bytes.

Before 07173c3ec276 ("block: enable multipage bvecs"), one bio can
include very limited pages, and usually at most 256, so the fs bio
size won't be bigger than 1M bytes most of times.

Since we support multi-page bvec, in theory one fs bio really can
be added > 1M pages, especially in case of hugepage, or big writeback
with too many dirty pages. Then there is chance in which .bi_size
is overflowed.

Fixes this issue by using bio_full() to check if the added segment may
overflow .bi_size.
Signed-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Cc: Liu Yiding <liuyd.fnst@cn.fujitsu.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 07173c3ec276 ("block: enable multipage bvecs")
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7a77dad7e3be1280456508841ccdd2a091b1906a upstream

In iomap_write_end, we're not holding a page reference anymore when
calling the page_done callback, but the callback needs that reference to
access the page.  To fix that, move the put_page call in
__generic_write_end into the callers of __generic_write_end.  Then, in
iomap_write_end, put the page after calling the page_done callback.
Reported-by: NJan Kara <jack@suse.cz>
Fixes: 63899c6f ("iomap: add a page_done callback")
Signed-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 26ddb1f4fd884258eeb8a8d7f2d40b163f00fedd upstream

The VFS-internal __generic_write_end helper always returns the value of
its @copied argument.  This can be confusing, and it isn't very useful
anyway, so turn __generic_write_end into a function returning void
instead.
Signed-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 054f1d1faaed6a7930b77286d607ae45c01d0443 upstream.

total_swapcache_pages() may race with swapper_spaces[] allocation and
freeing.  Previously, this is protected with a swapper_spaces[] specific
RCU mechanism.  To simplify the logic/code complexity, it is replaced with
get/put_swap_device().  The code line number is reduced too.  Although not
so important, the swapoff() performance improves too because one
synchronize_rcu() call during swapoff() is deleted.

[ying.huang@intel.com: fix bad swap file entry warning]
  Link: http://lkml.kernel.org/r/20190531024102.21723-1-ying.huang@intel.com
Link: http://lkml.kernel.org/r/20190527082714.12151-1-ying.huang@intel.comSigned-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Signed-off-by: N"Huang, Ying" <ying.huang@intel.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Tested-by: NMike Kravetz <mike.kravetz@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>

commit eb085574a7526c4375965c5fbf7e5b0c19cdd336 upstream.
Change SWP_VALID to (1 << 12).

When swapin is performed, after getting the swap entry information from
the page table, system will swap in the swap entry, without any lock held
to prevent the swap device from being swapoff.  This may cause the race
like below,

CPU 1				CPU 2
-----				-----
				do_swap_page
				  swapin_readahead
				    __read_swap_cache_async
swapoff				      swapcache_prepare
  p->swap_map = NULL		        __swap_duplicate
					  p->swap_map[?] /* !!! NULL pointer access */

Because swapoff is usually done when system shutdown only, the race may
not hit many people in practice.  But it is still a race need to be fixed.

To fix the race, get_swap_device() is added to check whether the specified
swap entry is valid in its swap device.  If so, it will keep the swap
entry valid via preventing the swap device from being swapoff, until
put_swap_device() is called.

Because swapoff() is very rare code path, to make the normal path runs as
fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of
reference count is used to implement get/put_swap_device().  >From
get_swap_device() to put_swap_device(), RCU reader side is locked, so
synchronize_rcu() in swapoff() will wait until put_swap_device() is
called.

In addition to swap_map, cluster_info, etc.  data structure in the struct
swap_info_struct, the swap cache radix tree will be freed after swapoff,
so this patch fixes the race between swap cache looking up and swapoff
too.

Races between some other swap cache usages and swapoff are fixed too via
calling synchronize_rcu() between clearing PageSwapCache() and freeing
swap cache data structure.

Another possible method to fix this is to use preempt_off() +
stop_machine() to prevent the swap device from being swapoff when its data
structure is being accessed.  The overhead in hot-path of both methods is
similar.  The advantages of RCU based method are,

1. stop_machine() may disturb the normal execution code path on other
   CPUs.

2. File cache uses RCU to protect its radix tree.  If the similar
   mechanism is used for swap cache too, it is easier to share code
   between them.

3. RCU is used to protect swap cache in total_swapcache_pages() and
   exit_swap_address_space() already.  The two mechanisms can be
   merged to simplify the logic.

Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com
Fixes: 235b6217 ("mm/swap: add cluster lock")
Signed-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Signed-off-by: N"Huang, Ying" <ying.huang@intel.com>
Reviewed-by: NAndrea Parri <andrea.parri@amarulasolutions.com>
Not-nacked-by: NHugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>

commit 8fd2e0b505d124bbb046ab15de0ff6f8d4babf56 upstream.
Change SWP_FS to SWP_FILE.

Swap readahead would read in a few pages regardless if the underlying
device is busy or not.  It may incur long waiting time if the device is
congested, and it may also exacerbate the congestion.

Use inode_read_congested() to check if the underlying device is busy or
not like what file page readahead does.  Get inode from
swap_info_struct.

Although we can add inode information in swap_address_space
(address_space->host), it may lead some unexpected side effect, i.e.  it
may break mapping_cap_account_dirty().  Using inode from
swap_info_struct seems simple and good enough.

Just does the check in vma_cluster_readahead() since
swap_vma_readahead() is just used for non-rotational device which much
less likely has congestion than traditional HDD.

Although swap slots may be consecutive on swap partition, it still may
be fragmented on swap file.  This check would help to reduce excessive
stall for such case.

The test with page_fault1 of will-it-scale (sometimes tracing may just
show runtest.py that is the wrapper script of page_fault1), which
basically launches NR_CPU threads to generate 128MB anonymous pages for
each thread, on my virtual machine with congested HDD shows long tail
latency is reduced significantly.

Without the patch
 page_fault1_thr-1490  [023]   129.311706: funcgraph_entry:      #57377.796 us |  do_swap_page();
 page_fault1_thr-1490  [023]   129.369103: funcgraph_entry:        5.642us   |  do_swap_page();
 page_fault1_thr-1490  [023]   129.369119: funcgraph_entry:      #1289.592 us |  do_swap_page();
 page_fault1_thr-1490  [023]   129.370411: funcgraph_entry:        4.957us   |  do_swap_page();
 page_fault1_thr-1490  [023]   129.370419: funcgraph_entry:        1.940us   |  do_swap_page();
 page_fault1_thr-1490  [023]   129.378847: funcgraph_entry:      #1411.385 us |  do_swap_page();
 page_fault1_thr-1490  [023]   129.380262: funcgraph_entry:        3.916us   |  do_swap_page();
 page_fault1_thr-1490  [023]   129.380275: funcgraph_entry:      #4287.751 us |  do_swap_page();

With the patch
      runtest.py-1417  [020]   301.925911: funcgraph_entry:      #9870.146 us |  do_swap_page();
      runtest.py-1417  [020]   301.935785: funcgraph_entry:        9.802us   |  do_swap_page();
      runtest.py-1417  [020]   301.935799: funcgraph_entry:        3.551us   |  do_swap_page();
      runtest.py-1417  [020]   301.935806: funcgraph_entry:        2.142us   |  do_swap_page();
      runtest.py-1417  [020]   301.935853: funcgraph_entry:        6.938us   |  do_swap_page();
      runtest.py-1417  [020]   301.935864: funcgraph_entry:        3.765us   |  do_swap_page();
      runtest.py-1417  [020]   301.935871: funcgraph_entry:        3.600us   |  do_swap_page();
      runtest.py-1417  [020]   301.935878: funcgraph_entry:        7.202us   |  do_swap_page();

[akpm@linux-foundation.org: code cleanup]
[yang.shi@linux.alibaba.com: add comment]
  Link: http://lkml.kernel.org/r/bbc7bda7-62d0-df1a-23ef-d369e865bdca@linux.alibaba.com
Link: http://lkml.kernel.org/r/1546543673-108536-1-git-send-email-yang.shi@linux.alibaba.comSigned-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Acked-by: NTim Chen <tim.c.chen@intel.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Hugh Dickins <hughd@google.com
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>

commit 8b09549c2bfd9f3f8f4cdad74107ef4f4ff9cdd7 upstream.

Commit fa5e084e ("vmscan: do not unconditionally treat zones that
fail zone_reclaim() as full") changed the return value of
node_reclaim().  The original return value 0 means NODE_RECLAIM_SOME
after this commit.

While the return value of node_reclaim() when CONFIG_NUMA is n is not
changed.  This will leads to call zone_watermark_ok() again.

This patch fixes the return value by adjusting to NODE_RECLAIM_NOSCAN.
Since node_reclaim() is only called in page_alloc.c, move it to
mm/internal.h.

Link: http://lkml.kernel.org/r/20181113080436.22078-1-richard.weiyang@gmail.comSigned-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Signed-off-by: NWei Yang <richard.weiyang@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NMatthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>

commit 8b37bc277fb459fa100808880a9d4e0641fff444 upstream.

There is a bug that checking the same active_list over and over again
in iocg_activate(). The intention of the code was checking whether all
the ancestors and self have already been activated. So fix it.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 53cf978457325d8fb2cdecd7981b31a8229e446e upstream.

This issue was found when I tried to put checkpoint work in a separate thread,
the deadlock below happened:
         Thread1                                |   Thread2
__jbd2_log_wait_for_space                       |
jbd2_log_do_checkpoint (hold j_checkpoint_mutex)|
  if (jh->b_transaction != NULL)                |
    ...                                         |
    jbd2_log_start_commit(journal, tid);        |jbd2_update_log_tail
                                                |  will lock j_checkpoint_mutex,
                                                |  but will be blocked here.
                                                |
    jbd2_log_wait_commit(journal, tid);         |
    wait_event(journal->j_wait_done_commit,     |
     !tid_gt(tid, journal->j_commit_sequence)); |
     ...                                        |wake_up(j_wait_done_commit)
  }                                             |

then deadlock occurs, Thread1 will never be waken up.

To fix this issue, drop j_checkpoint_mutex in jbd2_log_do_checkpoint()
when we are going to wait for transaction commit.
Reviewed-by: NJan Kara <jack@suse.cz>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

This code causes a static analysis warning:

    block/blk-iocost.c:2113 ioc_weight_write() error: double lock 'irq'

We disable IRQs in blkg_conf_prep() and re-enable them in
blkg_conf_finish().  IRQ disable/enable should not be nested because
that means the IRQs will be enabled at the first unlock instead of the
second one.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Function ioc_rqos_throttle() may called inside queue_lock.
We should unlock the queue_lock before entering sleep.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 9d179b865449b351ad5cb76dbea480c9170d4a27 upstream.

blkcg_activate_policy() has the following bugs.

* cf09a8ee19ad ("blkcg: pass @q and @blkcg into
  blkcg_pol_alloc_pd_fn()") added @blkcg to ->pd_alloc_fn(); however,
  blkcg_activate_policy() ends up using pd's allocated for the root
  blkcg for all preallocations, so ->pd_init_fn() for non-root blkcgs
  can be passed in pd's which are allocated for the root blkcg.

  For blk-iocost, this means that ->pd_init_fn() can write beyond the
  end of the allocated object as it determines the length of the flex
  array at the end based on the blkcg's nesting level.

* Each pd is initialized as they get allocated.  If alloc fails, the
  policy will get freed with pd's initialized on it.

* After the above partial failure, the partial pds are not freed.

This patch fixes all the above issues by

* Restructuring blkcg_activate_policy() so that alloc and init passes
  are separate.  Init takes place only after all allocs succeeded and
  on failure all allocated pds are freed.

* Unifying and fixing the cleanup of the remaining pd_prealloc.
Signed-off-by: NTejun Heo <tj@kernel.org>
Fixes: cf09a8ee19ad ("blkcg: pass @q and @blkcg into blkcg_pol_alloc_pd_fn()")
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 71c814077de60b2e7415dac6f5c4e98f59d521fd upstream.

When blkcg_activate_policy() is creating blkg_policy_data for existing
blkgs, it did in the wrong order - descendants first.  Fix it.  None
of the existing controllers seem affected by this.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

When the QoS targets are met and nothing is being throttled, there's
no way to tell how saturated the underlying device is - it could be
almost entirely idle, at the cusp of saturation or anywhere inbetween.
Given that there's no information, it's best to keep vrate as-is in
this state.  Before 7cd806a9a953 ("iocost: improve nr_lagging
handling"), this was the case - if the device isn't missing QoS
targets and nothing is being throttled, busy_level was reset to zero.

While fixing nr_lagging handling, 7cd806a9a953 ("iocost: improve
nr_lagging handling") broke this.  Now, while the device is hitting
QoS targets and nothing is being throttled, vrate keeps getting
adjusted according to the existing busy_level.

This led to vrate keeping climing till it hits max when there's an IO
issuer with limited request concurrency if the vrate started low.
vrate starts getting adjusted upwards until the issuer can issue IOs
w/o being throttled.  From then on, QoS targets keeps getting met and
nothing on the system needs throttling and vrate keeps getting
increased due to the existing busy_level.

This patch makes the following changes to the busy_level logic.

* Reset busy_level if nr_shortages is zero to avoid the above
  scenario.

* Make non-zero nr_lagging block lowering nr_level but still clear
  positive busy_level if there's clear non-saturation signal - QoS
  targets are met and nr_shortages is non-zero.  nr_lagging's role is
  preventing adjusting vrate upwards while there are long-running
  commands and it shouldn't keep busy_level positive while there's
  clear non-saturation signal.

* Restructure code for clarity and add comments.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NAndy Newell <newella@fb.com>
Fixes: 7cd806a9a953 ("iocost: improve nr_lagging handling")
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7afcccafa59fb63b58f863a6c5e603a34625955b upstream.

The default hard disk param sets latency targets at 50ms.  As the
default target percentiles are zero, these don't directly regulate
vrate; however, they're still used to calculate the period length -
100ms in this case.

This is excessively low.  A SATA drive with QD32 saturated with random
IOs can easily reach avg completion latency of several hundred msecs.
A period duration which is substantially lower than avg completion
latency can lead to wildly fluctuating vrate.

Let's bump up the default latency targets to 250ms so that the period
duration is sufficiently long.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7cd806a9a953f234b9865c30028f47fd738ce375 upstream.

Some IOs may span multiple periods.  As latencies are collected on
completion, the inbetween periods won't register them and may
incorrectly decide to increase vrate.  nr_lagging tracks these IOs to
avoid those situations.  Currently, whenever there are IOs which are
spanning from the previous period, busy_level is reset to 0 if
negative thus suppressing vrate increase.

This has the following two problems.

* When latency target percentiles aren't set, vrate adjustment should
  only be governed by queue depth depletion; however, the current code
  keeps nr_lagging active which pulls in latency results and can keep
  down vrate unexpectedly.

* When lagging condition is detected, it resets the entire negative
  busy_level.  This turned out to be way too aggressive on some
  devices which sometimes experience extended latencies on a small
  subset of commands.  In addition, a lagging IO will be accounted as
  latency target miss on completion anyway and resetting busy_level
  amplifies its impact unnecessarily.

This patch fixes the above two problems by disabling nr_lagging
counting when latency target percentiles aren't set and blocking vrate
increases when there are lagging IOs while leaving busy_level as-is.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 25d41e4aadb0788b4fae8a8fca90f437b9ebd727 upstream.

vrate_adj tracepoint traces vrate changes; however, it does so only
when busy_level is non-zero.  busy_level turning to zero can sometimes
be as interesting an event.  This patch also enables vrate_adj
tracepoint on other vrate related events - busy_level changes and
non-zero nr_lagging.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Bios are not associated with blkg before entering iocost controller.
do it in ioc_rqos_throttle() as well as ioc_rqos_merge().

Considering that there are so many chances to create blkg before
ioc_rqos_merge(), we just lookup the blkg here and if blkg are not
exist, just return rather than create it.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

To support cgroup v1.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7c1ee704a1d6450f92372d57f5b76a458b51c1d4 upstream.

Report debt and rename del_ms row to delay for consistency.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit b06f2d35c6b14d956f19eeabe1f257caeb66e38e upstream.

When outputting json:

* Don't truncate numbers.

* Report address of iocg to ease drilling down further.

When outputting table:

* Use math.ceil() for delay_ms so that small delays don't read as 0.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit e742bd5cb55ec0be48c5e7b356393a708e7f73c9 upstream.

Json has limited accuracy for numbers and can silently truncate 64bit
values, which can be extremely confusing.  Let's consistently use
string encapsulated values for json output.

While at it, convert an unnecesary f-string to str().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit e1518f63f246831af222758ead022cd40e79fab8 upstream.

Merges have the same problem that forced-bios had which is fixed by
the previous patch.  The cost of a merge is calculated at the time of
issue and force-advances vtime into the future.  Until global vtime
catches up, how the cgroup's hweight changes in the meantime doesn't
matter and it often leads to situations where the cost is calculated
at one hweight and paid at a very different one.  See the previous
patch for more details.

Fix it by never advancing vtime into the future for merges.  If budget
is available, vtime is advanced.  Otherwise, the cost is charged as
debt.

This brings merge cost handling in line with issue cost handling in
ioc_rqos_throttle().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 36a524814ff3e5d5385f42d30152fe8c5e1fd2c1 upstream.

Currently, when a bio needs to be force-charged and there isn't enough
budget, vtime is simply pushed into the future.  This means that the
cost of the whole bio is scaled using the current hweight and then
charged immediately.  Until the global vtime advances beyond this
future vtime, the cgroup won't be allowed to issue normal IOs.

This is incorrect and can lead to, for example, exploding vrate or
extended stalls if vrate range is constrained.  Consider the following
scenario.

1. A cgroup with a very low hweight runs out of budget.

2. A storm of swap-out happens on it.  All of them are scaled
   according to the current low hweight and charged to vtime pushing
   it to a far future.

3. All other cgroups go idle and now the above cgroup has access to
   the whole device.  However, because vtime is already wound using
   the past low hweight, what its current hweight is doesn't matter
   until global vtime catches up to the local vtime.

4. As a result, either vrate gets ramped up extremely or the IOs stall
   while the underlying device is idle.

This is because the hweight the overage is calculated at is different
from the hweight that it's being paid at.

Fix it by remembering the overage in absoulte vtime and continuously
paying with the actual budget according to the current hweight at each
period.

Note that non-forced bios which wait already remembers the cost in
absolute vtime.  This brings forced-bio accounting in line.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit e036c4cabaa8d24375262ced3a191819a8077b74 upstream.

ioc_pd_free() first cancels the hrtimers and then deactivates the
iocg.  However, the iocg timer can run inbetween and reschedule the
hrtimers which will end up running after the iocg is freed leading to
crashes like the following.

  general protection fault: 0000 [#1] SMP
  ...
  RIP: 0010:iocg_kick_delay+0xbe/0x1b0
  RSP: 0018:ffffc90003598ea0 EFLAGS: 00010046
  RAX: 1cee00fd69512b54 RBX: ffff8881bba48400 RCX: 00000000000003e8
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881bba48400
  RBP: 0000000000004e20 R08: 0000000000000002 R09: 00000000000003e8
  R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90003598ef0
  R13: 00979f3810ad461f R14: ffff8881bba4b400 R15: 25439f950d26e1d1
  FS:  0000000000000000(0000) GS:ffff88885f800000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f64328c7e40 CR3: 0000000002409005 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   <IRQ>
   iocg_delay_timer_fn+0x3d/0x60
   __hrtimer_run_queues+0xfe/0x270
   hrtimer_interrupt+0xf4/0x210
   smp_apic_timer_interrupt+0x5e/0x120
   apic_timer_interrupt+0xf/0x20
   </IRQ>

Fix it by canceling hrtimers after deactivating the iocg.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Reported-by: NDave Jones <davej@codemonkey.org.uk>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit e916ad29d96485e5aa3d3237bfeab1522c713d5e upstream.

ioc_cpd_alloc() forgot to check NULL return from kzalloc().  Add it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 3532e7227243beb0b782266dc05c40b6184ad051 upstream.

blk_iocost_init() forgot to free its percpu stat on the error path.
Fix it.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Reported-by: NHillf Danton <hdanton@sina.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 8d1c1560c383004e09c6a39498094671cc664e6b upstream.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 8504dea783b044cab620acbaef87b86ee84646fe upstream.

Add a script which can be used to generate device-specific iocost
linear model coefficients.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 6954ff185ee0811cdd2e0f388ff4dd7df17f11af upstream.

Instead of mucking with debugfs and ->pd_stat(), add drgn based
monitoring script.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7caa47151ab2e644dd221f741ec7578d9532c9a3 upstream.

This patchset implements IO cost model based work-conserving
proportional controller.

While io.latency provides the capability to comprehensively prioritize
and protect IOs depending on the cgroups, its protection is binary -
the lowest latency target cgroup which is suffering is protected at
the cost of all others.  In many use cases including stacking multiple
workload containers in a single system, it's necessary to distribute
IO capacity with better granularity.

One challenge of controlling IO resources is the lack of trivially
observable cost metric.  The most common metrics - bandwidth and iops
- can be off by orders of magnitude depending on the device type and
IO pattern.  However, the cost isn't a complete mystery.  Given
several key attributes, we can make fairly reliable predictions on how
expensive a given stream of IOs would be, at least compared to other
IO patterns.

The function which determines the cost of a given IO is the IO cost
model for the device.  This controller distributes IO capacity based
on the costs estimated by such model.  The more accurate the cost
model the better but the controller adapts based on IO completion
latency and as long as the relative costs across differents IO
patterns are consistent and sensible, it'll adapt to the actual
performance of the device.

Currently, the only implemented cost model is a simple linear one with
a few sets of default parameters for different classes of device.
This covers most common devices reasonably well.  All the
infrastructure to tune and add different cost models is already in
place and a later patch will also allow using bpf progs for cost
models.

Please see the top comment in blk-iocost.c and documentation for
more details.

v2: Rebased on top of RQ_ALLOC_TIME changes and folded in Rik's fix
    for a divide-by-zero bug in current_hweight() triggered by zero
    inuse_sum.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
[Joseph: fix confilcts with ioc_rqos_throttle()]
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 38cf3a687f5827fcfc81cbc433ef5822693a49c1 upstream.

a5e112e6424a ("cgroup: add cgroup_parse_float()") accidentally added
cgroup_parse_float() inside CONFIG_SYSFS block.  Move it outside so
that it doesn't cause failures on !CONFIG_SYSFS builds.
Signed-off-by: NTejun Heo <tj@kernel.org>
Fixes: a5e112e6424a ("cgroup: add cgroup_parse_float()")
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit a5e112e6424adb77d953eac20e6936b952fd6b32 upstream.

cgroup already uses floating point for percent[ile] numbers and there
are several controllers which want to take them as input.  Add a
generic parse helper to handle inputs.

Update the interface convention documentation about the use of
percentage numbers.  While at it, also clarify the default time unit.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 6f816b4b746c2241540e537682d30d8e9997d674 upstream.

There are currently two start time timestamps - start_time_ns and
io_start_time_ns.  The former marks the request allocation and and the
second issue-to-device time.  The planned io.weight controller needs
to measure the total time bios take to execute after it leaves rq_qos
including the time spent waiting for request to become available,
which can easily dominate on saturated devices.

This patch adds request->alloc_time_ns which records when the request
allocation attempt started.  As it isn't used for the usual stats,
make it optional behind CONFIG_BLK_RQ_ALLOC_TIME and
QUEUE_FLAG_RQ_ALLOC_TIME so that it can be compiled out when there are
no users and it's active only on queues which need it even when
compiled in.

v2: s/pre_start_time/alloc_time/ and add CONFIG_BLK_RQ_ALLOC_TIME
    gating as suggested by Jens.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit beab17fc2a507e85dd18b3cef83820c5770c5f34 upstream.

io.weight is gonna be another rq_qos cgroup mechanism.  Let's rename
RQ_QOS_CGROUP which is being used by io.latency to RQ_QOS_LATENCY in
preparation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
[Jiufei: remove unused function rq_qos_id_to_name()]
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 9677a3e01f838622d2efc9a3ccb97090a2c3156a upstream.

wbt already gets queue depth changed notification through
wbt_set_queue_depth().  Generalize it into
rq_qos_ops->queue_depth_changed() so that other rq_qos policies can
easily hook into the events too.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit d3e65ffff61c329fb2d0bf15736c440c2d0cfc97 upstream.

Add a merge hook for rq_qos.  This will be used by io.weight.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 015d254cb02b6d8eec4b3366274bf4672f9e0b64 upstream.

Separate out blkcg_conf_get_disk() so that it can be used by blkcg
policy interface file input parsers before the policy is actually
enabled.  This doesn't introduce any functional changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>